Design,synthesis, and characterization of a combined main-chain/side-chain liquid-crystalline polymer based on ethyl cellulose

A novel combined main-chain/side-chain liquid-crystalline polymer based on an ethyl cellulose main chain containing azobenzene mesogens (AzoEC) was successfully synthesized. Molecular characterization of the resulting polymers with different degrees of substitution (DS) was performed with proton nuclear magnetic resonance (¹H NMR), Fourier-transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Thermal stability was investigated by thermogravimetric analysis (TGA). The phase transitions and liquid-crystalline behavior of these polymers were investigated by differential-scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The results indicate that DS has substantial effect on the liquid-crystalline behavior of these polymers. AzoEC with low DS only shows the cholesteric phase similar to ethyl cellulose (EC). However, when DS increases to a specific value, AzoEC begins to show fascinating supramolecular structures. The supramolecular structure of AzoEC with maximum DS consisted of a large-scale ordered lamellar structure formed by EC main chains and a small-scale ordered structure formed by azobenzene mesogens.     

Reversible Photoinduced Switching of Permeability in a Cast Non‐Porous Film Comprising Azobenzene Liquid Crystalline Polymer

Permeation characteristics of an azobenzene‐containing liquid crystalline (LC) non‐porous film are investigated using a metallic corrosion method. Thin films (300 nm) are fabricated by the solution casting of an azobenzene side‐chain LC polymer on freshly polished carbon steel coupons. Coated coupons are treated under the following conditions: a) gradual annealing at a cooling rate lower than 1 °C · min⁻¹ from 150 °C (above its T_g) to room temperature, and b) irradiation at 465 nm (20 mW · cm⁻²) with either circularly polarized light (CPL) or non‐polarized light (NPL). The morphology of these films is characterized using X‐ray diffraction, polarized optical microscopy, and transmission measurements. The results suggest that the annealing treatment resulted in the formation of a polydomain structure consisting of locally ordered small smectic domains that lack mutual orientation. Ordered micro domains are surrounded by disordered phases. CPL and NPL irradiation generates a monodomain orientated structure and an isotropic liquid crystal glass, respectively. The permeability of these non‐porous films treated by CPL, NPL, and annealing are found to be 6.14 × 10⁻⁴, 1.92 × 10⁻², and 1.56 × 10⁻³ cm³ · m⁻² · d⁻¹. An orientation‐dependent structure model is constructed to explain the permeation phenomenon, considering the ordered phase is impermeable, only the disordered phase is accessible to penetrating molecules. Fast switching of gas permeation is demonstrated by alternative irradiation of the film with CPL and NPL, which results in an approximately 30‐fold difference in the permeability of the non‐porous film.

     

光致取向调控偶氮苯侧链液晶聚合物的阻隔特性研究

研究了液晶分子的排列方式对聚合物膜阻隔特性的影响,采用473 nm线偏振光照无定形偶氮液晶聚合物,使其介晶基元发生从无序到有序的取向排列.用膜透射率变化和锥光干涉图表征了分子的取向,其锥光干涉图为粗黑十字,说明在线偏振光下作用下液晶分子取向形成了单相畴沿面内排列的有序态.用金属表面氧化法进一步研究了取向态聚合物膜的阻隔...     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Preparation and characterization of chiral polyacrylates end‐capped with bornyl groups in the side chains

Chiral polyacrylates with bornyl end‐capped side chains with four kinds of mesogenic moieties (azobenzene, biphenyl, benzoyloxy biphenyl, and phenyl benzoate) were prepared. The phase properties of the polymers were investigated with X‐ray diffraction, differential scanning calorimetry, and polarizing optical microscopy. The thermogravimetric characteristics, the glass‐transition temperatures and weight‐average molecular weights, of the homopolymers were evaluated. The optical properties of the synthesized polymers in diluted solutions and in the thin‐film state were also evaluated. The optical behavior of the composite films upon photoirradiation was investigated through the change in the transmittance of the probe light triggered by ultraviolet (365‐nm) irradiation. Ultraviolet irradiation and heat treatment caused a reversible intensity change of the probe light at λ = 400 nm. The shrinkage of the photoisomerization of the composite films was also investigated with atomic force microscopy. A spot contraction appeared on the surface when it was irradiated with a laser light spot. The contraction was recovered by heat treatment at 80 °C for 10 min. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1075–1092, 2004     

Novel photo‐crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo‐crosslinkable bis(vanillylidene‐azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy‐4,4′‐azobenzenedicarboxylic ester)s, have been synthesised from bis[m‐hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two‐stage decomposition. Using the UV–visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo‐crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone‐based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Unusual photo-induced behaviour in a side chain liquid crystalline azo-polyester

An unusual behaviour has been observed in the photo-induced response of an azobenzene side chain liquid crystalline polyester (P6d4). Room temperature irradiation with linearly polarised 488 nm light does not induce any birefringence (Δn) in films of this polymer that have been quenched from the isotropic state. However, using the same irradiation conditions Δn is induced in quenched films that have been kept in darkness for a few minutes. Besides, no photo-induced Δn is observed in films irradiated with 488 nm light that have been previously irradiated with UV light. In this case, Δn can be recorded if the UV irradiated films have been kept in darkness for several hours. In another set of experiments performed with the P6d4 polymer, irradiation with high intensity linearly polarised 488 nm light induces an initial increase of Δn and then it goes back to zero. Subsequent irradiation with linearly polarised 633 nm light induces an orientation of the azobenzene chromophores perpendicular to the polarisation of the 488 nm light and independent of the 633 nm light polarisation direction. These results are very different from those obtained in other side chain polyesters which only differ from P6d4 in the end substituent. The anomalous behaviour of P6d4 is discussed in terms of a supercooling effect of the isotropic phase, the trans to cis back isomerization, the trans aggregation kinetics and a memory effect associated with the main chain orientation.     

Thermal‐ and Photo‐Induced Phase‐Transition Behaviors of a Tapered Dendritic Liquid Crystal with Photochromic Azobenzene Mesogens and a Bicyclic Chiral Center

A ribbon‐shaped chiral liquid crystalline (LC) dendrimer with photochromic azobenzene mesogens and an isosorbide chiral center (abbreviated as AZ₃DLC) was successfully synthesized and its major phase transitions were studied by using differential scanning calorimetry (DSC) and linear polarized optical microscopy (POM). Its ordered structures at different temperatures were further identified through structure‐sensitive diffraction techniques. Based on the experimental results, it was found that the AZ₃DLC molecule exhibited the low‐ordered chiral smectic (Sm*) LC phase with 6.31 nm periodicity at a high‐temperature phase region. AZ₃DLC showed the reversible photoisomerization in both organic solvents and nematic (N) LC media. As a chiral‐inducing agent, it exhibited a good solubility, a high helical‐twisting power, and a large change in the helical‐twisting power due to its photochemical isomerization in the commercially available N LC hosts. Therefore, we were able to reversibly “remote‐control” the colors in the whole visible region by finely tuning the helical pitch of the spontaneously formed helical superstructures.     

Synthesis and liquid crystalline behaviour of substituted (E)-phenyl-4-(phenyldiazenyl) benzoate derivatives and their photo switching ability

Azobenzene derivatives containing phenyl/4-halogen-phenyl 4-{(E)-[4-(pent-4-en-1-yloxy)phenyl]diazenyl}benzoate group with different electronegative substituent (H, F, Cl, Br and I) at other end was synthesised. These azo-based benzoate derivatives have been characterised by FTIR, ¹H-NMR, ¹³C-NMR, elemental analyser, POM and UV-Vis spectroscopy. Photosaturation at 358 nm obtained after 82 s of UV irradiation and the longest thermal back relaxation time of 45 h recorded by UV-Vis. The azo derivative could be possible photolock under UV light, as observed by the improved thermal back relaxation time. The resulting photolockable chain of azobenzene might prove valuable in the development of optical device application. These azobenzene moieties also exhibit liquid crystalline behaviour with respect to the halogen substitution as an electron withdrawing group shows that strong structure property relationship exists among them.     

A Hierarchical MFI Zeolite with a Two‐Dimensional Square Mesostructure

A conceptual design and synthesis of ordered mesoporous zeolites is a challenging research subject in material science. Several seminal articles report that one‐dimensional (1D) mesostructured lamellar zeolites are possibly directed by sheet‐assembly of surfactants, which collapse after removal of intercalated surfactants. However, except for one example of two‐dimensional (2D) hexagonal mesoporous zeolite, no other zeolites with ordered 2D or three‐dimensional (3D) mesostructures have been reported. An ordered 2D mesoporous zeolite can be templated by a cylindrical assembly unit with specific interactions in the hydrophobic part. A template molecule with azobenzene in the hydrophobic tail and diquaternary ammonium in the hydrophilic head group directs hierarchical MFI zeolite with a 2D square mesostructure. The material has an elongated octahedral morphology, and quaternary, ordered, straight, square channels framed by MFI thin sheets expanded along the a–c planes and joined with 90° rotations. The structural matching between the cylindrical assembly unit and zeolite framework is crucial for mesostructure construction.     

Liquid crystalline polymers: 14. Synthesis and thermal behaviour of some polyethers containing azo-mesogens

The paper presents a study on the relationship between the structure of macromolecular chain and its capacity to generate a mesophase, when mesogens with an azobenzene structure are implied. The polymers have been synthesized by phase transfer catalysis starting from 1,9-dichlorononane and different bisphenols: diphenyl-4,4^′-bis[(azo-4-)phenol], 4,4^′-dihydroxyazobenzene, 4,4^′-dihydroxydiphenyl, bisphenol A and 4,4^′-dihydroxybenzophenone. The polymers have been characterized by ¹H-NMR spectroscopy, DSC calorimetry, optical microscopy in polarized light and thermogravimetrical analysis. Theoretical conformational studies, using molecular simulations have also been performed. Due to their particular geometry, bis-(azobenzene) units are better mesogenic groups as compared with the azobenzene ones. The highly aromatic structure makes impossible the samples isotropisation, as the degradation processes starting advance. For these polymers, under UV irradiation, due to the presence of two azo groups in each mesogen unit, strong conformational modifications are expected. The replacement of the bis-(azobenzene) moieties with azobenzene ones reduces the transition temperatures, making possible the samples isotropisation.     

Liquid crystalline homopolyesters having main chain calamitic mesogens and one or two side chain azobenzene moieties in the repeat units

Combined semi-rigid homopolyesters, containing both main chain calamitic mesogens and one or two side chain azobenzene units separated by aliphatic (hexamethylene, octamethylene and decamethylene) chains in the polymer repeat units, were prepared and their liquid crystalline properties characterized. Polyesters having two side chain azobenzene units and a main chain biphenyl moiety showed a higher ordered smectic B or smectic F phase, whereas the other polymers containing a main chain 2,5-diphenyl-1,3,4-thiadiazole unit and one or two side chain methoxyazobenzene units formed a smectic C phase despite the presence of different mesogens in the main and side chains. This is probably due to the compact molecular chain-packing and intra- and intermolecular interactions between the polymer backbones and the two azobenzene units.     

Non-symmetrical bent-shaped liquid crystals based on a laterally substituted naphthalene central core with four ester groups

In the continuation of our study of the role of direction of the linking ester group and lateral substitution, we present three series of bent-core liquid crystals based on 7-hydroxynaphthalene-2-carboxylic acid. The mesomorphic properties were investigated by polarised optical microscopy, differential scanning calorimetry, X-ray diffraction and electro-optical methods. For non-substituted and laterally methyl-substituted compounds, columnar phases of broken-layer type and a smectic A phase were found. With the increasing length of the terminal alkyl chain, an increasing stability of the lamellar smectic A phase was observed. Substitution with a methyl group led to substantial narrowing of the mesophase range and the chloro-substituted materials exhibited no mesophases. The results are also discussed in context with the earlier studied naphthalene based mesogens.     

Design,synthesis, and characterisation of symmetrical bent-core liquid crystalline dimers with diacetylene spacer

Two new symmetrical bent-core liquid crystalline dimers (B-DA4 and B-DA12) bearing diacetylenes spacer and different terminal alkyl chains were successfully synthesised via Sonagashira coupling reaction. The molecular structures of these dimers were confirmed by ¹H nuclear magnetic resonance (NMR), Fourier transform-infrared spectroscopy (FT-IR), Raman spectroscopy, mass spectrometry, and elemental analysis. Their thermal stability and liquid crystalline properties were characterised by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarised light microscopy (PLM), and small-angle X-ray scattering (SAXS). Results showed that the diacetylene group may be thermal polymerised at about 260°C far from thermal decomposition. The dimers exhibited monotropic phase behaviour and typical layered-structure phase with long-range order on a length scale of about 6.3 nm was observed. The results mentioned above offer a promising opportunity to design polydiacetylene nanowires by thermal, UV irradiation, or scanning tunnelling microscope (STM) tip-induced polymerisation.     

RAFT synthesis,properties and morphologies via thermal annealing of new azo-based ABA triblock copolymers bearing rigid and soft segments

In this study, a series of novel ABA-type triblock azo-copolymers (TBCs) consisting of PEG and PCAEMA segments were synthesized by RAFT polymerization. The TBCs were characterized by ¹H-NMR, GPC, DSC, OPM, AFM, GISAXS, and UV-vis. Number-average molecular weight (≤34,200?g/mol) and molecular weight distribution (≤1.44) were slightly increased with increasing the feed molar ratio of monomer to macroinitiator. This indicates a controlled/living polymerization with good distribution. All TBCs displayed transitions attributed to smectic-to-nematic and nematic-to-smectic phases at 108?°C and 104?°C, respectively. TBC with 34?wt% azobenzene displayed fan-shaped focal conic texture, while TBCs containing 46, 53, 58, 63, and 71?wt% azobenzene revealed batonnet textures. TBC-3 and TBC-4 having 53 and 58?wt% azo contents produced lamellar and a mixture of cylinder and lamellar nanostructures compared to other TBCs, which formed hexagonal cylindrical nanostructures. Every TBCs exhibited photoresponsive behavior under UV irradiation and thermal relaxation.     

Molecular symmetry effects on the stability of highly ordered smectic phases

In an effort to control the phase ranges of highly ordered smectic phases, we examined the impact of molecular symmetry on phase behaviour of a series of 12 symmetrical and unsymmetrical 4,4′-dialkanoyloxybiphenyl derivatives. Combined differential scanning calorimetry, polarised optical microscopy, and X-ray diffraction studies indicated that the compounds studied formed smectic F liquid crystals, and in some cases, G phases at lower temperatures. Although the clearing temperatures were largely unaffected by molecular symmetry, the transitions from the SmF liquid crystals to more ordered phases were consistently lowered upon reducing the molecular symmetry. As a result, unsymmetrical molecules had broader mesophases than their higher symmetry isomers, suggesting a strategy for tuning the phase behaviour of these highly ordered lamellar phases, which have been widely targeted for organic semiconductors.     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Synthesis and Characterization of H‐bonded Side‐Chain Liquid‐Crystalline Polysiloxanes

Smectic Liquid‐crystalline (LC) polysiloxanes P1～P7 were prepared using cholesteryl 6‐undec‐10‐enoyloxy‐naphthalene‐2‐carboxylate and cholesteryl 3‐sulfo‐4‐undec‐10‐enoyloxy‐benzoate in a one‐step reaction with sulfonic acid group contents ranging between 0 and wt 4.39%. With an increase of sulfonic acid groups, the glass transition temperature rose slightly; while the temperature of clear point decreased. As sulfonic groups increased, H‐bonding interaction strengthened, resulting in an increase of glass transition temperature. On the other hand, aggregates of H‐bond derived from sulfonic acids would destroy the homogeneous rigid moieties and the high‐ordered structure, resulting in a temperature of clear point decreased. In X‐ray measurement, all the polymers displayed sharp strong peaks around 2θ≈2.6° and broad peaks around 2θ ≈16.6°. The broad peaks at wide‐angle are similar, but there is great different at low angles. For the polymer without sulfonic acid, the only one strong peak at low angle indicates high‐ordered lamellar structure due to homogeneous rigid moieties. For the polymers containing more sulfonic acid, two sharp peaks appeared at low angles, and the intensities of these two peaks varied. With increase of sulfonic acid groups in the polymer systems, the hydrogen‐bonding aggregates in domains would divide the homogeneous rigid mesogens into two kinds of nanophases, that is, one containing non H‐bond mesogens and another involving H‐bonding aggregated mesogens. These two different nanophases result in different lamellar spacings.     

Photo‐regulated phase transition of poly(ethylene glycol) derivative containing azobenzene group

A photo‐responsive and thermo‐responsive poly(ethylene glycol) derivative containing azobenzene group was synthesized. Its photoisomerization kinetics was investigated by the UV–vis spectra, and the pseudo‐first‐order rate constants (k_t and k_c) were determined to be 1.5 × 10^?2 and 9.3 × 10^?2 s^?1, respectively. It is found that the phase transition behavior can be tuned theoretically through photoirradiation between 26.6°C and 36.7°C. Finally, it is worthy to note that the changes of the lower critical solution temperature occur repeatedly upon successive irradiation of UV and visible light. Copyright © 2012 John Wiley & Sons, Ltd.