New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Kinetic studies on the n-alkyl acrylate polymerization

Kinetic studies on the polymerization of n-butyl acrylate and n-octadecyl acrylate in toluene at 70°C with benzoyl peroxide as initiator are reported. High monomer orders of 1.55 and 1.75 were obtained for n-butyl and n-octadecyl acrylates, respectively. Though the initiator order in butyl acrylate polymerization was 0.5, the octadecyl acrylate polymerization showed less than square root initiator order. The activation energy for the polymerization of both the acrylates was determined. Autoacceleration was found even at low conversions. The autoacceleration was influenced by both monomer and initiator concentration. Molecular weight data was presented in support of the gel effect. © 1992 John Wiley & Sons, Inc.     

Electroinitiated polymerization of vinylic monomers in polar systems. III. Polymerization of acrylates and methacrylates in alcohol solutions

Methyl, ethyl, and n-butyl acrylates and methacrylates are polymerized by electroinitiation in methanol–, ethanol–, and n-propanol–electrolyte mixtures in which the monomers are soluble whereas the polymers obtained are insoluble. The technique of changing the polarity of the electrodes described earlier was used. The relationships between molecular weights and polymer yields as function of current density, initial monomer concentration and dielectric constant of the solvent are described. A kinetic scheme for the initiation, propagation, and termination is given.     

Shining a light on catalytic chain transfer

The catalytic chain transfer polymerization of styrene is only truly effective when the reaction mixture is exposed to (UV-)light. The apparent chain transfer constant depends inversely on radical concentration and can be increased up to 8000. These results can be explained by combining aspects of both catalytic chain transfer and the formation of cobalt-carbon bonds. For the catalytic chain transfer polymerization of n-butyl acrylate a chain transfer constant of 650 was found. The resulting transfer coefficient has the same order of magnitude as the one for n-butyl methacrylate. This means that the absence of an α-methyl group hardly influences the transfer step itself. Furthermore, the effect of possible impurities on the catalytic chain transfer polymerization of methyl methacrylate is investigated.     

Controlled Free-Radical Copolymerization of N-vinyl succinimide and n-Butyl acrylate via a Reversible Addition–Fragmentation Chain Transfer (RAFT) Technique

Summary : Copolymerization of N-vinyl succinimide and n-butyl acrylate in the presence of dibenzyl trithiocarbonate as a reversible addition-fragmentation chain transfer agent was investigated. The linear dependence of molecular mass on conversion and low values of polydispersity index confirmed pseudo-living mechanism of the process. For the first time the soluble copolymers of N-vinyl succinimide and n-butyl acrylate with high composition homogeneity have been synthesized by copolymerization in bulk. The copolymerization kinetics was studied by NMR ¹H spectroscopy; the reactivity ratios were determined: r_VSI = 0.11, r_BA = 2.54. The copolymer microstructure was estimated; it was shown that in conditions of RAFT polymerization gradient copolymers enriched with BA on the tails of the macromolecule and with VSI in the middle can be obtained. The method of elimination of trithiocarbonate fragment by the reaction with an excess of AIBN was proposed leading to formation of the simplest gradient structure of N-vinyl succinimide – n-butyl acrylate copolymer.     

Role of chain transfer in heterogeneous polymerization of ethylene

The role of chain transfer was studied for the radiation-induced polymerization of ethylene in precipitating media, namely n-butyl alcohol, tert-butyl alcohol and their mixtures. The affinities of those solvents for polyethylene are similar, but the chain-transfer coefficient of n-butyl alcohol is larger than that of tert-butyl alcohol. The polymerizations were carried out in a reactor of 100 ml under a pressure of 300 kg/cm², at 60°C, dose rate of 3.07 × 10⁴–1.75 × 10⁵ rad/hr in the presence of 50 ml of solvents. The polymerization in tert-butyl alcohol shows the kinetic behavior characteristic of a heterogeneous polymerization, such as rate acceleration, high dose rate dependence of polymerization rate, and low dose rate dependence of polymer molecular weight, whereas the polymerization in n-butyl alcohol does not exhibit such behavior and gives polymer having a molecular weight much lower than that of polymer obtained in tert-butyl alcohol. The polymer formed in tert-butyl alcohol exhibits a bimodal molecular weight distribution measured by gel permeation chromatography. In mixed tert-butyl alcohol and n-butyl alcohol solvent, with increasing fraction of n-butyl alcohol, the two peaks not only shift to lower molecular weight but the higher molecular weight peak becomes relatively small. Eventually, the polymer formed in n-butyl alcohol exhibits a unimodal distribution. Those results are well explained on the basis of the proposed scheme for heterogeneous polymerization.     

Controlled radical polymerization of styrene and <Emphasis Type="Italic">n</Emphasis>-butyl acrylate mediated by trithiocarbonates

The free-radical bulk homopolymerization of styrene and n-butyl acrylate at 80°C mediated by dibenzyl trithiocarbonate, poly(styryl) trithiocarbonate, or poly(n-butyl acrylate) trithiocarbonate as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that the use of low-and high-molecular-mass reversible addition-fragmentation chain-transfer agents makes it possible to efficiently control the molecular-mass characteristics of polymers. In the case of styrene, the rate of polymerization slightly depends on the concentration of the addition-fragmentation chain-transfer agent. In contrast, for the polymerization of n-butyl acrylate, the rate significantly decreases with the concentration of the chain-transfer agent. Formation of radical intermediates during the polymerization of styrene and n-butyl acrylate mediated by trithiocarbonates has been studied by ESR spectroscopy. It has been demonstrated that the polymeric chain-transfer agents are efficient for the synthesis of block copolymers with the controlled block length.     

Dielectric Study of n-Butyl Acetate–Alcohol Mixtures by Time-Domain Reflectometry

Using picosecond time-domain reflectometry (TDR), dielectric relaxation studies have been carried out on binary mixtures of n-butyl acetate with methanol, ethanol, and 1-propanol, over the frequency range from 10 MHz to 20 GHz, at various concentrations and temperatures. The excess permittivity, excess inverse relaxation time, Kirkwood correlation factor, and thermodynamic parameters have been obtained. The excess permittivity for all the systems is negative. The values of static permittivity and relaxation time decrease with an increase in the percentage of n-butyl acetate in the mixtures.     

Kinetics and electron spin resonance study of the radical polymerization of n‐butyl acrylate mediated by a nitroxide precursor: C‐phenyl‐N‐tert‐butylnitrone

The C‐phenyl‐N‐tert‐butylnitrone/azobisisobutyronitrile pair is able to impart control to the radical polymerization of n‐butyl acrylate as long as a two‐step process is implemented, that is, the prereaction of the nitrone and the initiator in toluene at 85 °C for 4 h followed by the addition and polymerization of n‐butyl acrylate at 110 °C. The structure of the in situ formed nitroxide has been established from kinetic and electron spin resonance data. The key parameters (the dissociation rate constant, combination rate constant, and equilibrium constant) that govern the process have been evaluated. The equilibrium constant between the dormant and active species is close to 1.6 × 10^?12 mol L^?1 at 110 °C. The dissociation rate constant and the activation energy for the C? ON bond homolysis are 1.9 × 10^?3 s^?1 and 122 ± 15 kJ mol^?1, respectively. The rate constant of recombination between the propagating radical and the nitroxide is as high as 1.2 × 10⁹ L mol^?1 s^?1. Finally, well‐defined poly(n‐butyl acrylate)‐b‐polystyrene block copolymers have been successfully prepared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6299–6311, 2006     

Preparation of polyethylene block copolymers by a combination of postmetallocene catalysis of ethylene polymerization and atom transfer radical polymerization

The synthesis of block copolymers consisting of a polyethylene segment and either a poly(meth)acrylate or polystyrene segment was accomplished through the combination of postmetallocene-mediated ethylene polymerization and subsequent atom transfer radical polymerization. A vinyl-terminated polyethylene (number-average molecular weight = 1800, weight-average molecular weight/number-average molecular weight =1.70) was synthesized by the polymerization of ethylene with a phenoxyimine zirconium complex as a catalyst activated with methylalumoxane (MAO). This polyethylene was efficiently converted into an atom transfer radical polymerization macroinitiator by the addition of α-bromoisobutyric acid to the vinyl chain end, and the polyethylene macroinitiator was used for the atom transfer radical polymerization of n-butyl acrylate, methyl methacrylate, or styrene; this resulted in defined polyethylene-b-poly(n-butyl acrylate), polyethylene-b-poly(methyl methacrylate), and polyethylene-b-polystyrene block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 496–504, 2004     

Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes

A novel potentiometric solid-state reference electrode containing single-walled carbon nanotubes as the transducer layer between a polyacrylate membrane and the conductor is reported here. Single-walled carbon nanotubes act as an efficient transducer of the constant potentiometric signal originating from the reference membrane containing the Ag/AgCl/Cl⁻ ions system, and they are needed to obtain a stable reference potentiometric signal. Furthermore, we have taken advantage of the light insensitivity of single-walled carbon nanotubes to improve the analytical performance characteristics of previously reported solid-state reference electrodes. Four different polyacrylate polymers have been selected in order to identify the most efficient reservoir for the Ag/AgCl system. Finally, two different arrangements have been assessed: (1) a solid-state reference electrode using photo-polymerised n-butyl acrylate polymer and (2) a thermo-polymerised methyl methacrylate:n-butyl acrylate (1:10) polymer. The sensitivity to various salts, pH and light, as well as time of response and stability, has been tested: the best results were obtained using single-walled carbon nanotubes and photo-polymerised n-butyl acrylate polymer. Water transport plays an important role in the potentiometric performance of acrylate membranes, so a new screening test method has been developed to qualitatively assess the difference in water percolation between the polyacrylic membranes studied. The results presented here open the way for the true miniaturisation of potentiometric systems using the excellent properties of single-walled carbon nanotubes.     

Prediction and Experimental Characterization of the Molecular Architecture of FRP and ATRP Synthesized Polyacrylate Networks

Summary: This work reports experimental and modeling studies concerning the conventional (FRP) and atom transfer radical polymerization (ATRP) of acrylate/diacrylate monomers. In the framework of a recently developed general approach, kinetic models including crosslinking reactions and branching by chain transfer to polymer are discussed for FRP and ATRP polymerization systems. Besides molecular weight distribution (MWD), fairly good predictions of the z-average radius of gyration could be obtained for these non-linear polymers. A set of experiments was performed at 1 L scale in a batch reactor using n-butyl acrylate (BA) or methyl acrylate (MA) as monovinyl monomers and 1,6-Hexanediol diacrylate (HDDA) or bisphenol A ethoxylate diacrylate (BEDA) as crosslinkers. In FRP experiments, AIBN was used as initiator and ATRP polymerizations were initiated by ethyl 2-bromopropionate (EBrP) and mediated by CuBr using PMDETA (N,N,N′,N″,N″-pentamethyldiethylenetriamine) as ligant. Polymerizations were carried out in solution at 60 °C with different dilutions using toluene and DMF as solvents. Products formed at different polymerization times were analyzed by SEC/RI/MALLS yielding average MW, MWD, z-average radius of gyration and monomer conversion. Important differences in the molecular architecture of the synthesized FRP and ATRP highly branched polyacrylates have been identified. Comparisons of experimental results with predictions have put into evidence the important effect of intramolecular cyclizations at all dilutions, even with ATRP polymerizations.     

Synthesis of hydroxy- and dihydroxy-end-capped poly(<Emphasis Type="Italic">n</Emphasis>-butyl acrylate)s and their use as reactive stabilizers for the preparation of polyurethane latexes

Well-defined hydroxy end-functionalized poly(n-butyl acrylate)s (PBA-OH and PBA-(OH)₂), were prepared by atom transfer radical polymerization (ATRP) and used as reactive stabilizers for the preparation of polyurethane in dispersed medium. PBA-OH was obtained by end-capping the growing poly(n-butyl acrylate) chains with allyl alcohol added in excess at the end of the polymerization. The two hydroxyl functions of PBA-(OH)₂ were fixed at one end of the poly(n-butyl acrylate) chains either by initiation or by chain-end functionalization reactions. The latter were protected under the form of cyclic acetal and attached either to the initiator bearing a secondary bromine or to the terminating agent carrying a poorly reactive vinylic unsaturation. PBA-OH and PBA-(OH)₂ have been successfully used as reactive stabilizers (surfmers) to prepare core-shell polyurethane particles in dispersed medium. The final particle size was found to be very much dependent to parameters such as the molar mass, concentration and valence of the reactive stabilizer as well as the manner of addition of the reactants during the procedure.     

Synthesis and Mechanical Properties of Polypropylene-based Polymer Hybrids via Controlled Radical Polymerization

Isotactic polypropylene-based graft copolymers linking poly(methyl methacrylate), poly(n-butyl acrylate) and polystyrene were successfully synthesized by a controlled radical polymerization with isotactic polypropylene (iPP) macroinitiator. The hydroxylated iPP, prepared by propylene/10-undecen-1-ol copolymerization with a metallocene/methyl-aluminoxane/triisobutylaluminum catalyst system, was treated with 2-bromoisobutyryl bromide to produce a Br-group containing iPP (PP-g-Br). The resulting PP-g-Br could initiate controlled radical polymerization of methyl methacrylate, n-butyl acrylate and styrene by using a copper catalyst system, leading to a variety of iPP-based graft copolymers with a different content of the corresponding polar segment. These graft copolymers demonstrated unique mechanical properties dependent upon the kind and content of the grafted polar segment.     

Copolymerization of N-Vinylsuccinimide with Butyl Methacrylate in Pyridine

The kinetics of radical copolymerization of N-vinylsuccinimide with n-butyl methacrylate in pyridine was studied, and the previously unknown copolymerization constants of the monomers were determined. The calculations were performed using appropriate software and a new procedure for approximation of the experimental data, which allow determination of the kinetic parameters at high conversions with the minimum error. The copolymerization kinetics were compared for the reaction systems constituted by N-vinylsuccinimide and n-butyl methacrylate and by N-vinylsuccinimide and n-butyl acrylate.     

Ligated anionic block copolymerization of methyl methacrylate with n-butyl acrylate and n-nonyl acrylate as promoted by lithium 2-(2-methoxyethoxy) ethoxide/diphenylmethyllithium

Poly(methyl methacrylate-b-n-butyl acrylate) (PMMA-b-Pn-BuA) and poly(methyl methacrylate-b-n-nonyl acrylate) (PMMA-b-Pn-NonA) diblock copolymers have been successfully synthesized by the sequential anionic polymerization of methyl methacrylate (MMA) and the n-alkyl acrylate (n-BuA or n-NonA), in a 90/10 toluene/tetrahydrofuran (THF) mixture at −78°C. When diphenylmethyllithium (DPMLi) ligated with lithium 2-(2-methoxyethoxy) ethoxide (LiOEEM) is used as the initiator, the polymerization of each block appears to be living. Molecular weight and composition of block copolymers can be predicted from the monomer over initator molar ratio and the molecular weight distribution is narrow. Size exclusion chromatography (SEC) supports that no homo-PMMA contaminates the final copolymer. Although the reverse polymerization sequence Pn-NonA-b-PMMA always results in some contamination by homo-Pn-NonA, it has no really significant effect on the final product characteristics. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1543–1548, 1997     

Self-degassing SARA ATRP mediated by Na2S2O4 with no external additives

The supplemental activator and reducing agent (SARA) atom transfer radical polymerization (ATRP) mediated by Na₂S₂O₄ in the presence of air, without external deoxygenation or additional oxygen scavengers, is reported for several vinyl monomers: methyl acrylate (MA), n-butyl acrylate (n-BA), methyl methacrylate (MMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether acrylate (OEOA), and styrene (Sty). The polymerizations can be conducted in aqueous medium or using organic/water mixtures as solvent, with low concentration of copper, near room temperature. In the absence of any external deoxygenation, several well-defined homopolymers and block copolymers were obtained (Ð < 1.3). The evolution of the oxygen concentration during the polymerizations was monitored with an optical oxygen sensor. The consumption of oxygen prior polymerization in ethanol/water mixtures was attributed to the combined presence of Na₂S₂O₄ and alkyl halide initiator, which led to a lower initiation efficiency (I_eff). This could be overcome by decreasing the headspace volume of the reaction. The system reported exhibited the potential to be scalable, which is very relevant from an industrial standpoint. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 145–153     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

The copolymerization behavior of acrylate dimers: Copolymers of methyl,ethyl, and n-butyl acrylate dimers

Dimers of methyl, ethyl, and n-butyl acrylate were synthesized in good yield through the use of a phosphine catalyst. The dimers synthesized in this manner have one double bond. The activity of this double bond was investigated in copolymerization reactions with styrene. The methyl acrylate dimer proved to have a slightly more favorable reactivity ratio than either the ethyl or n-butyl acrylate dimers.     

Thermal degradation of poly(alkyl acrylates). II. Primary esters: Ethyl,n-propyl,n-butyl,and 2-ethylhexyl

Quantitative analyses of the products of thermal degradation of poly(ethyl acrylate), poly(n-propyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) have been made, principally by the combined application of GLC and mass and infrared spectroscopy. Data are recorded in mass balance tables. The major gaseous products are carbon dioxide and the olefin corresponding to the ester group. The minor gaseous products include the corresponding alkane, the alkane/olefin ratio being of the order of 10^?2–10^?3, and traces of carbon monoxide and hydrogen. The alcohol corresponding to the alkyl group is the major liquid product but there are also traces of monomer and the corresponding methacrylate. Alcohol production exhibits autocatalytic properties. The chain fragment fractions of the products are colored yellow and have average chain lengths of 3.2, 3.3, 3.6, and 5.6 for the ethyl, n-propyl, n-butyl and 2-ethylhexyl esters, respectively. The infrared spectra are similar to those of the parent polymers but with well defined differences. Insolubility develops in the ethyl, n-propyl, and n-butyl esters, but the residual material from poly(2-ethylhexyl acrylate) remains soluble even at very advanced stages of degradation. All of these products and reaction characteristics are accounted for in terms of radical reactions with a unique initiation step.