Über Chalkogenolate. 178. Untersuchungen über Kupfer(I)-ethylxanthat

On Chalcogenolates. 178. Studies on Copper(I) Ethyl Xanthate Yellow Cu[S₂C? OC₂H₅] has been prepared by two different methods. In contrast to earlier observations it is not soluble in ethanolic solutions containing [S₂C? OC₂H₅]^? ions in excess. Cu[S₂C? OC₂H₅] reacts with CS₃^2? ions to form [Cu(CS₃)]^?. The compounds [(C₆H₅)₄E][Cu(CS₃)] with E = P, As have been isolated.     

Reaktionsprodukte von S7NH mit Nickel- und Kupfersalzen Darstellung und Struktur der Komplexe [(CH3)4N][Ni(S3N)(CN)2], [(C6H5)4As][Cu(S3N)2] und [(C6H5)4As][Cu(S3N)CI]

Metal Sulfur Nitrogen Compounds 18. Reaction Products of S₇NH with Nickel and Copper Salts. Preparation and Structures of the Complexes [Ch₃₄N][Ni(S₃N)(CN)₂], [(C₆H₅)₄As][Cu(S₃N)₂], and [(C₆H₅)₄AS][Cu(S₃N)Cl]. In the presence of MOH (M = K, [(CH₃)₄N]), S₇NH reacts with Ni(CN)₂ to yield, besides the three-nuclear complex M[(S₃NNi)₃S₂], the new mononuclear complex M[Ni(S₃N)(CN)₂]. The [(CH₃)₄N]⁺ salt is monoclinic, C2/m, a = 19.303(9), b =6.941(3), c=16.309(10) Å, β = 144.51⁰(2), Z = 4. The [Ni(S₃N)(CN)₂]- anion is planar, Ni being coordinated by one S₃N^? chelate ligand and by two CN^? ions. From the reaction of CuCI₂, S₇NH, and [Ph₄As]OH result the salts [Ph₄As][Cu(S₃N)₂] or [Ph₄As][Cu(S₃N)Cl], depending on the reaction conditions. [Ph₄As][Cu(S₃N)₂] is triclinic, P&1macr;, a = 7.073(3), b = 11.742(4), c = 16.439(6) Å α = 91.08°(3), β = 99.01°(3), γ = 91.58°(3), Z = 2. Two S₃N^? chelate ligands coordinate to Cu^I in a distorted tetrahedral arrangement. [Ph₄As][Cu(S₃N)Cl] is monoclinic, C2/c, a = 17.174(6), b = 13.650(5), c = 21.783(5) Å β = 100.45°(2), Z = 8. Cu^I is coordinated by one S₃N^? chelate ligand and one C1^?, resulting in a trigonal planar environment.     

Über die Reaktion von 2,2-Dimethylpropylidinphosphan mit Wolframhexachlorid; die Kristallstrukturen von [(Cl3PO)WCl4(H9C4?CC?C4H9)] und [(H5C6)4As][WCl6]

Reaction of 2,2-Dimethylpropylidynephosphane with Tungsten Hexachloride as well as the Crystal Structures of [(Cl₃PO)WCl₄(H₉C₄? C?C—C₄H₉)] and [(H₅C₆)₄As][WCl₆] The reaction of 2,2-dimethylpropylidynephosphane, (CH₃)₃C? C?P|, with tungsten hexachloride suspended in POCl₃ results, with oxidation of the phosphorus atom, in 2,2,5,5-tetramethylhex-3-yne. This compound reacts with tungsten tetrachloride simultaneously formed to give the alkyne complex [(Cl₃PO)WCl₄(H₉C₄? C?C—C₄H₉)], which is dark green in colour. A small amount of tungsten hexachloride is reduced merely to tungsten pentachloride; after the addition of tetraphenyl arsonium chloride it can be isolated as [(H₅C₆)₄As][WCl₆]. For this compound, a new and very simple synthesis from WCl₆, [(H₅C₆)₄As]Cl and C₂Cl₄ as reducing agent is described. The structure of [(Cl₃PO)WCl₄(H₉C₄? C?C? C₄H₉)] has been determined from X-ray diffraction data (R = 5.8%). The complex crystallizes in the monoclinic space group P2₁/n with: {a = 1510; b = 1517; c = 849 pm; β = 93.1°; Z = 4}. The tungsten atom is sevenfold coordinated by four equatorial chlorine atoms, by the C°C group of the acetylene ligand and by the oxygen atom of the POCl₃ molecule in trans position. The bulky acetylene ligand which is nearly symmetrically bound shifts the chlorine atoms towards the solvated POCl₃ molecule so that no common plane with the tungsten atom is possible. With 130 pm the C°C bond length of the 2,2,5,5-tetramethyl-3-yne ligand corresponds to a C°C double bond. The i.r. spectrum of [(H₅C₆)As][WCl₆] shows two WCl₆ strectching vibrations and therefore proves a reduction of octahedral symmetry. In agreement with the results of a crystal structure determination (space group P4/n; a = 1301; c = 780 pm; Z = 2.7%) the [WCl₆]^?-anion has nearly exact C_4V symmetry with somewhat shorter W? Cl bond lengths parallel to the fourfold axis of rotation.     

Pentafluorphenyliod(III)-Verbindungen. 2. Fluor-Aryl Substitution an Iodtrifluorid: Synthese von Pentafluorphenylioddifluorid C6F5IF2 und Bis(pentafluorphenyl)iodonium Pentafluorphenylfluoroboraten [(C6F5)2I]+[(C6F5)nBF4−n]−

Pentafluorophenyliodine(III) Compounds. 2. Fluorine-Aryl Substitution Reactions on Iodinetrifluoride: Synthesis of Pentafluorophenyliodinedifluoride C₆F₅IF₂ and Bis(pentafluorophenyl)iodonium Pentafluorophenylfluoroborates[(C₆F₅)₂I]⁺[(C₆F₅)_nBF_4?n]^? Mono- and disubstitution can be achieved in the fluorine-aryl substitution reaction on the low-temperature phase IF₃ in CH₂Cl₂ at ?78°C depending on the aryl transfer reagent. With B(C₆F₅)₃ [(C₆F₅)₂I]⁺ [(C₆F₅)_nBF_4?n]^? (68% yield) and with Cd(C₆F₅)₂ C₆F₅IF₂ (97% yield) is obtained whereas with C₆F₅SiMe₃ no fluorine-aryl substitution takes place on IF₃ even under basic conditions (EtCN or F^? addition). At ?78°C in EtCN solution IF₃ does not disproportionate but attacks the solvent under formation of HF.     

Charakterisierung von Distorsionsisomeren der Anionen Pentacyano-oxo-molybdat(IV) sowie Tetracyano-oxo-aqua-molybdat(IV) im festen Zustand. Kristallstrukturen von [(C6H5)4P]3[MoO(CN)5] · 7 H2O(grün), [(C6H5)4As]2 [MoO(OH2)(CN)4] · 4 H2O (blau) und [(C6H5)4P]2[MoO(OH2)(CN)4] · 4 H2O (grün)

Characterization of Distortional Isomers of the Anions Pentacyano-oxo-molybdate(IV) and of Tetracyano-aqua-oxo-molybdate(IV) in the Solid State. Crystal Structures of [(C₆H₅)₄P]₃[MoO(CN)₅] · 7 H₂O (green), [(C₆H₅)₄As]₂[MoO(OH₂)(CN)₄] · 4 H₂O (blue), and [(C₆H₅)₄P]₂[MoO(OH₂) (CN)₄] · 4 H₂O (green) Preparation of a series of salts containing the new pentacyano-oxo-molybdate(IV) anion is described: Cs₂H[MoO(CN)₅] (blue), [(CH₃)₄N]₂H[MoO(CN)₅] · 2 H₂O (blue) and [Cr(en)₃] [MoO(CN)₅] · 4 H₂O (green). The green [(C₆H₅)₄P]₃[MoO(CN)₅] · 7 H₂O crystallizes triclinic in the space group P1 . The molybdenum(IV) center is in an pseudo-octahedral environment of a terminal oxo-group (d(Mo?O); 1.705(4) Å), a CN^? group in the trans-position (d(Mo? C): 2.373(6) Å), and four equatorial CN^? groups (averaged d(Mo? C): 2.178 (Å). The blue and green salts exhibit v(Mo?O) stretching frequencies at 948 cm^?1 and 920 cm^?1, respectively. Blue and green salts containing the [MoO(OH₂)(CN)₄]^2? anion and [(C₆H₅)₄P]⁺ or [(C₆H₅)₄As]⁺ cations have been prepared and characterized by single crystal crystallography. [(C₆H₅)₄P]₂[MoO(OH₂)(CN)₄] · 4 H₂O (green) and [(C₆H₅)₄As]₂[MoO(OH₂)(CN)₄] · 4 H₂O (blue) crystallize monoclinic in the space group C—P2₁/n. They are considered to be distortional isomers of the complex anion: the green species has a Mo?O bond distance of 1.72(2) Å whereas for the blue species d(Mo?O) = 1.60(2) Å is found; the corresponding v(Mo?O) frequencies are at 920 cm^?1 and 980 cm^?1.     

Synthesis,Structures, and Photophysics of Polynuclear Silver(I) Thiolate and Silver(I) Thiocarboxylate Complexes with Dppm Ligands

Trinuclear silver(I) thiolate and silver(I) thiocarboxylate complexes [Ag₃(μ‐dppm)₃(μ_n‐SR)₂](ClO₄) [n = 2, R = C₆H₄Cl‐4 ( 1 ) and C{O}Ph ( 2 ); n = 3, R = tBu ( 3 )], pentanuclear silver(I) thiolate complex [Ag₅(μ‐dppm)₄(μ₃‐SC₆H₄NO₂‐4)₄](PF₆) ( 4 ), and hexanuclear silver(I) thiolate complexes [Ag₆(μ‐dppm)₄(μ₃‐SR)₄]Y₂ [Y = ClO₄, R =C₆H₄CH₃‐4 ( 5 ) and C₁₀H₇ (2‐naphthyl) ( 7 ); Y = PF₆, R = C₆H₄OCH₃‐4( 6 )], were synthesized [dppm = bis(diphenylphosphanyl)methane] and their crystal structures as well as photophysical properties were studied. In the solid state at 77 K, trinuclear silver(I) thiolate and silver(I) thiocarboxylate complexes 1 and 2 exhibit luminescence at 470–523 nm, tentatively attributed to originate from the ³IL (intraligand) of thiolate or thiocarboxylate ligands, whereas hexanuclaer silver(I) thiolate complexes 5 and 7 produce dual emission, in which high‐energy emission is tentatively attributed to come from the ³IL of thiolate ligands and low‐energy emission is tentatively assigned to come from the admixture of metal ··· metal bond‐to‐ligand charge‐transfer (MMLCT) and metal‐centered (MC) excited states.     

[Cu3(S4)3]−, ein neues kondensiertes anorganisches Ringsystem Strukturvergleich mit anderen Polysulfido-Clustern des Kupfers

[Cu₃(S₄)₃]^3?, a New Condensed Inorganic Ring System. Comparison with the Structures of Other Polysulfido Clusters of Copper By reaction of Cu(CH₃COO)₂ · H₂O with a polysulfide solution [(C₆H₅)₄P]₂(NH₄)-[Cu₃(S₄)₃] · 2CH₃OH ( 1a ) could be obtained in a pure form. The anion [Cu₃(S₄)₃]^3? ( 1 ) consists of a central Cu₃S₃ ring and three CuS₄ rings. An X-ray structure analysis yields the following results for 1a : Space group P2₁/c, a = 2317.4(7), b = 1458.4(4), C = 1843. 1(5) pm, β = 108.68(2)°, V = 5901.0 10⁶ pm³, Z = 4; R = 0.101 for 3817 independent reflections (Fo > 3.92° (Fo)). 1a was also characterized by its Raman spectrum.     

Über Chalkogenolate. 198. Untersuchungen über Polythiocuprate (I) [Cu(Sx)]− 2. Hydrazinium- und Ethylendiammoniumpolythiocuprate(I)

On Chalcogenolates. 198. Studies on Polythiocuprates(I) [Cu(S_x)]^?. 2. Hydrazinium and Ethylenediammonium Polythiocuprates(I) The red polythiocuprates(I) 1–5 (formulae see ?Inhaltsübersicht”?) have been prepared by reaction of hydrazinium or ethylenediammonium polysulfides with copper(II) salts, dissolved in water, under variable conditions. Their properties are described. In aqueous alkaline media 1–5 decompose into CuS and S; in the presence of carbon disulfide CuS, S_x^2?, and CS₃^2? besides CS₄^2? and S₂CO^2? are formed. The existence of the discreet ion [Cu₂CS₇]^2?, described in literature, was not confirmed. The polythiocuprates(I) 1–5 , dissolved im dimethylformamide, decompose via the radical anion S₃^?. The decomposition of S₃^? has been studied kinetically by means of compound 5 . The half-life of decay of S₃^? is τ_1/2 = 71.5 h at 20°C. The pentathiocuprate(I) 3 reacts with n-butyl chloride to produce the substituted sulfanes (C₄H₉)₂S_x′ where x = 1, 2 and 3.     

Photoinduced synthesis of the mixed metal “manganese rhenium cubane” [Mn3Re(CO)12(SC6H5)4]

The photoinduced synthesis and spectroscopic properties of the new mixed metal compound [Mn₃Re(CO)₁₂(SC₆H₅)₄] by UV irradiation of a mixture of Mn₂(CO)₁₀, Re₂(CO)₁₀ with S₂(C₆H₅)₂ is described. No mixed sulphur/selenium compounds [M₄(CO)₁₂S_nSe_4?n(C₆H₅)₄] (M = Mn or Re, n = 1–3) could be obtained by analogous photoreactions.     

Thermal studies of some biologically active oxovanadium(IV) complexes containing 8-hydroxyquinolinate and hydroxamate ligands

The thermal decomposition behaviours of oxovanadium(IV)hydroxamate complexes of composition [VO(Q)_2?n(HL^1,2)_n]: [VO(C₉H₆ON)(C₆H₄(OH)(CO)NHO)] (I), [VO(C₆H₄(OH)(CO)NHO)₂] (II), [VO(C₉H₆ON)(C₆H₄(OH)(5-Cl)(CO)NHO)] (III), and [VO(C₆H₄(OH)(5-Cl)(CO)NHO)₂] (IV) (where Q?=?C₉H₆NO^? 8-hydroxyquinolinate ion; HL¹?=?[C₆H₄(OH)CONHO]^? salicylhydroxamate ion; HL²?=?[C₆H₃(OH)(5-Cl)CONHO]^? 5-chlorosalicylhydroxamate ion; n?=?1 and 2), which are synthesised by the reactions of [VO(Q)₂] with predetermined molar ratios of potassium salicylhydroxamate and potassium 5-chlorosalicylhydroxamate in THF?+?MeOH solvent medium, have been studied by TG and DTA techniques. Thermograms indicate that complexes (I) and (III) undergo single-step decomposition, while complexes (II) and (IV) decompose in two steps to yield VO(HL^1,2) as the likely intermediate and VO₂ as the ultimate product of decomposition. The formation of VO₂ has been authenticated by IR and XRD studies. From the initial decomposition temperatures, the order of thermal stabilities for the complexes has been inferred as III?>?I > II?>?IV.     

Synthesis of cross linked platinum metal containing polyyne polymers

Reaction of Pt(PⁿBu₃)₂Cl₂ (1) or Pt(AsⁿBu₃₂Cl₂ (2) with stoichiometric amounts of 1,3,5-triethynylbenzene, [1,3,5-(H? C?C? )₃C₆H₃] (3)yields monomeric, [1,3,5-Cl(PⁿBu₃)₂(Pt? C? C? )₃C₆H₃] (4), [1,3,5-(C1)(AsⁿBu₃)₂Pt? C? C? ₃C₆H₃] (5) or polymeric, {1,3,5-[(PⁿBu₃)₂Pt? C?C? ]₃C₆H₃? )ⁿ (6), {1,3,5-[(AsⁿBu₃)₂Pt? C? C? ]₃C₆H₃? }ⁿ (7) complexes. Treatment of (1) with (3) and 2,5-diethynyl-p-xylene,H? C? C? C₆H₂(CH₃)₂? C? C? H (8) in varying molar ratios yields a series of high molecular weight cross linked platinum metal containing polyyne copolymers.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

Polythiolated complexes. Part 2(1). Palladium(II) and platinum(II) derivatives of polyfluorophenylthiolates

Summary The preparation and characterization of the new thiolate complexes [M(SR)₂(SEt₂)₂] (M=Pt, R=C₆F₅ orp-C₆HF₄) and [M(SR)₂]_n (M=Pd, R=C₆F₅,p-C₆HF₄ orp-C₆H₄F; M=Pt, R=p-C₆H₄F) is discussed. The tendency to form polymeric, rather than monomeric species, varies as follows: Pd>Pt; C₆H₄F>C₆HF₄> C₆F₅. [Pt(SC₆F₅)₂(SEt₂)₂] has atrans square planar coordination.     

The conformations of two copper(I) complexes of 1H‐benzimidazole‐2(3H)‐thione and thiosaccharinate

(Acetonitrile‐1κN)[μ‐1H‐benzimidazole‐2(3H)‐thione‐1:2κ²S:S][1H‐benzimidazole‐2(3H)‐thione‐2κS]bis(μ‐1,1‐dioxo‐1λ⁶,2‐benzothiazole‐3‐thiolato)‐1:2κ²S³:N;1:2κ²S³:S³‐dicopper(I)(Cu—Cu), [Cu₂(C₇H₄NO₂S₂)₂(C₇H₆N₂S)₂(CH₃CN)] or [Cu₂(tsac)₂(Sbim)₂(CH₃CN)] [tsac is thiosaccharinate and Sbim is 1H‐benzimidazole‐2(3H)‐thione], (I), is a new copper(I) compound that consists of a triply bridged dinuclear Cu—Cu unit. In the complex molecule, two tsac anions and one neutral Sbim ligand bind the metals. One anion bridges via the endocyclic N and exocyclic S atoms (μ‐S:N). The other anion and one of the mercaptobenzimidazole molecules bridge the metals through their exocyclic S atoms (μ‐S:S). The second Sbim ligand coordinates in a monodentate fashion (κS) to one Cu atom, while an acetonitrile molecule coordinates to the other Cu atom. The Cu^I—Cu^I distance [2.6286 (6) Å] can be considered a strong `cuprophilic' interaction. In the case of [μ‐1H‐benzimidazole‐2(3H)‐thione‐1:2κ²S:S]bis[1H‐benzimidazole‐2(3H)‐thione]‐1κS;2κS‐bis(μ‐1,1‐dioxo‐1λ⁶,2‐benzothiazole‐3‐thiolato)‐1:2κ²S³:N;1:2κ²S³:S³‐dicopper(I)(Cu—Cu), [Cu₂(C₇H₄NO₂S₂)₂(C₇H₆N₂S)₃] or [Cu₂(tsac)₂(Sbim)₃], (II), the acetonitrile molecule is substituted by an additional Sbim ligand, which binds one Cu atom via the exocylic S atom. In this case, the Cu^I—Cu^I distance is 2.6068 (11) Å.     

Synthesis,Characterization and Photophysical Studies of Luminescent Dinuclear and Trinuclear Copper(I) Alkynyl Phosphines

Luminescent polynuclear copper(I) alkynyl complexes, including two trinuclear bicapped complexes, [Cu₃(μ-dppm)₃(μ ₃-η ¹-C≡CC₆H ₄ ⁿ C₄H₉)₂]BF₄ (1) and [Cu₃(μ-dppm)₃(μ ₃-η ¹-C≡CC₆H₄C≡CC₆H₅)₂]BF₄ (2), as well as two dinuclear complexes, [Cu₂(PPh₂Me)₄(μ ₂-η ¹-C≡CC₆H ₄ ⁿ C₄H₉)₂] (3) and [Cu₂(PPh₂Me)₄(μ ₂-η ¹-C≡CC₆H₄C≡CC₆H₅)₂] (4), have been successfully synthesized and characterized. The carbazole moiety has also been incorporated into the alkynyl skeleton to prepare the trinuclear bicapped complex, [Cu₃(μ-dppm)₃(μ ₃-η ¹-C≡CC₆H₄-Cz)₂]BF₄ (Cz = carbazole) (5). The crystal structure of 3 has also been determined. The complexes exhibit high-energy intraligand (IL) π → π* absorption bands typical of the corresponding phosphine and alkynyl ligands. The complexes show intense luminescence originated from a ³LMCT [RC≡C^? → Cu _n ] state (n = 2, 3), with mixing of a triplet metal cluster-centered ds/dp state.     

Syntheses and crystal structures of two heterometallic iodoplumbates containing mixed‐valence copper(I/II)

Mixed‐valence copper(I/II) atoms have been introduced successfully into a Pb/I skeleton to obtain two heterometallic iodoplumbates, namely poly[bis(tetra‐n‐butylammonium) [bis(μ₃‐dimethyldithiocarbamato)dodeca‐μ₃‐iodido‐hexa‐μ₂‐iodido‐tetracopper(I)copper(II)hexalead(II)]], {(C₁₆H₃₆N)₂[Cu₄^ICu^IIPb₆(C₃H₆NS₂)₂I₁₈]}_n , (I), and poly[[μ₃‐iodido‐tri‐μ₂‐iodido‐iodido[bis(1,10‐phenanthroline)copper(I)]copper(I)copper(II)lead(II)] hemiiodine], {[Cu^ICu^IIPbI₅(C₁₂H₈N₂)₂]·0.5I₂}_n , (II), under solution and solvothermal conditions, respectively. Compound (I) contains two‐dimensional anionic layers, which are built upon the linkages of Cu^II(S₂CNMe₂)₂ units and one‐dimensional anionic Pb/I/Cu^I chains. Tetra‐n‐butylammonium cations are located between the anionic layers and connected to them via C—H…I hydrogen‐bonding interactions. Compound (II) exhibits a one‐dimensional neutral structure, which is composed of [PbI₅] square pyramids, [Cu^II₄] tetrahedra and [Cu^IIN₄I] trigonal bipyramids. Face‐to‐face aromatic π–π stacking interactions between adjacent 1,10‐phenanthroline ligands stabilize the structure and assemble compound (II) into a three‐dimensional supramolecular structure. I₂ molecules lie in the voids of the structure.     

Chiral one‐ and two‐dimensional silver(I)–biotin coordination polymers

Reaction of biotin {C₁₀H₁₆N₂O₃S, HL; systematic name: 5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoic acid} with silver acetate and a few drops of aqueous ammonia leads to the deprotonation of the carboxylic acid group and the formation of a neutral chiral two‐dimensional polymer network, poly[[{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}silver(I)] trihydrate], {[Ag(C₁₀H₁₅N₂O₃S)]·3H₂O}_n or {[Ag(L)]·3H₂O}_n, (I). Here, the Ag^I cations are pentacoordinate, coordinated by four biotin anions via two S atoms and a ureido O atom, and by two carboxylate O atoms of the same molecule. The reaction of biotin with silver salts of potentially coordinating anions, viz. nitrate and perchlorate, leads to the formation of the chiral one‐dimensional coordination polymers catena‐poly[[bis[nitratosilver(I)]‐bis{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] monohydrate], {[Ag₂(NO₃)₂(C₁₀H₁₆N₂O₃S)₂]·H₂O}_n or {[Ag₂(NO₃)₂(HL)₂]·H₂O}_n, (II), and catena‐poly[bis[perchloratosilver(I)]‐bis{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}], [Ag₂(ClO₄)₂(C₁₀H₁₆N₂O₃S)₂]_n or [Ag₂(ClO₄)₂(HL)₂]_n, (III), respectively. In (II), the Ag^I cations are again pentacoordinated by three biotin molecules via two S atoms and a ureido O atom, and by two O atoms of a nitrate anion. In (I), (II) and (III), the Ag^I cations are bridged by an S atom and are coordinated by the ureido O atom and the O atoms of the anions. The reaction of biotin with silver salts of noncoordinating anions, viz. hexafluoridophosphate (PF₆⁻) and hexafluoridoantimonate (SbF₆⁻), gave the chiral double‐stranded helical structures catena‐poly[[silver(I)‐bis{μ₂‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] hexafluoridophosphate], {[Ag(C₁₀H₁₆N₂O₃S)₂](PF₆)}_n or {[Ag(HL)₂](PF₆)}_n, (IV), and catena‐poly[[[{5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}silver(I)]‐μ₂‐{5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] hexafluoridoantimonate], {[Ag(C₁₀H₁₆N₂O₃S)₂](SbF₆)}_n or {[Ag(HL)₂](SbF₆)}_n, (V), respectively. In (IV), the Ag^I cations have a tetrahedral coordination environment, coordinated by four biotin molecules via two S atoms, and by two carboxy O atoms of two different molecules. In (V), however, the Ag^I cations have a trigonal coordination environment, coordinated by three biotin molecules via two S atoms and one carboxy O atom. In (IV) and (V), neither the ureido O atom nor the F atoms of the anion are involved in coordination. Hence, the coordination environment of the Ag^I cations varies from AgS₂O trigonal to AgS₂O₂ tetrahedral to AgS₂O₃ square‐pyramidal. The conformation of the valeric acid side chain varies from extended to twisted and this, together with the various anions present, has an influence on the solid‐state structures of the resulting compounds. The various O—H...O and N—H...O hydrogen bonds present result in the formation of chiral two‐ and three‐dimensional networks, which are further stabilized by C—H...X (X = O, F, S) interactions, and by N—H...F interactions for (IV) and (V). Biotin itself has a twisted valeric acid side chain which is involved in an intramolecular C—H...S hydrogen bond. The tetrahydrothiophene ring has an envelope conformation with the S atom as the flap. It is displaced from the mean plane of the four C atoms (plane B) by 0.8789 (6) Å, towards the ureido ring (plane A). Planes A and B are inclined to one another by 58.89 (14)°. In the crystal, molecules are linked via O—H...O and N—H...O hydrogen bonds, enclosing R₂²(8) loops, forming zigzag chains propagating along [001]. These chains are linked via N—H...O hydrogen bonds, and C—H...S and C—H...O interactions forming a three‐dimensional network. The absolute configurations of biotin and complexes (I), (II), (IV) and (V) were confirmed crystallographically by resonant scattering.     

New media in homogeneous catalysis: wet sodium or tetrabutylammonium hydrogensulfate salts for reppe syntheses catalyzed by a ru(ii) carbonyl complex

The ruthenium(II) complex fac-[Ru(CO)₂(H₂O)₃(C(O)C₂H₅)][CF₃SO₃] dissolved in aqueous tetrabutylammonium hydrogensulfate ([(CH₃(CH₂)₃)₄N][HSO₄]) or sodium hydrogensulfate (NaHSO₄) catalyzes the hydrocarboxylation of ethylene to propionic acid and additionally produces minor amounts of hydrocarbonylation products (diethyl ketone and propanal), under water-gas shift reaction conditions. This system is stable with a selectivity of 90% to propionic acid for high ethylene conversion. A turnover frequency of propionic acid, TOF(C₂H₅CO₂H)/24?h?=?5?×?10³ (TOF (C₂H₅CO₂H)?=?([(moles of C₂H₅CO₂H)/(moles of Ru)?×?rt)]?×?24?h) was achieved for Ru?=?7.45?×?10^?4?mol, [(CH₃(CH₂)₃)₄N][HSO₄]?=?80?g (2.36?×?10^?2?mol); H₂O?=?40?g (2.22?mol); CO?=?C₂H₄?=?20?g (total pressure?=?88?atm); T?=?150°C by a reaction time (rt) of 2.87?h. The countercation (sodium or tetrabutylammonium), the ruthenium concentration and the hydrogensulfate/H₂O ratio of the medium affect the catalytic reaction. A nonlinear dependence on total ruthenium concentration was shown. The data are discussed in terms of a potential catalytic cycle. Formation of propionic acid comes from hydrolysis, and formation of diethyl ketone and propanal comes from hydrogenolysis of the Ru-ketyl and Ru-acyl complexes, respectively.     

The formation and crystal and molecular structures of hexa(μ-organothiolato)tetracuprate(I) cage dianions: bis-(tetramethylammonium)hexa-(μ-methanethiolato)tetracuprate(I) and two polymorphs of bis(tetramethylammonium)hexa-(μ-benzenethiolato)-tetracuprate(I)

X-Ray analysis shows that the crystalline compounds (Me₄N)₂[Cu₄(SMe)₆] (1), (Me₄N)₂[Cu₄(SPh)₆] (2) and (Me₄N)₂[Cu₄(SPh)₆]EtOH (3) all contain the [tetrahedro-Cu^I₄-octahedro-(SR)₆]^2? molecular cage. Very well developed pale yellow crystals of (2) and (3) can be obtained directly from a mixture of copper(II) salt and excess benzenethiol with tertiary amine in alcohol. The substituents R of the [Cu₄(SR)₆]^2? cage remove the high symmetry of the Cu₄S₆ core, and allow three configurational isomers for the cage. All known instances of this cage structure occur as the isomer which minimises the number of close contacts of substituents over the surface of the cage. Despite this, there remain intra-cage repulsive interactions between substituents, greater for RPh than for RMe, which cause distortions primarily in the SCuS angles which range from 105–144°. CuS distances are coupled, apparently electronically, to opposite SCuS angles. The stereo-chemical analysis is extended to all known Cu₄(SR)₆ cages, and to alternative cage structures.     

(Phosphine)gold(I) Complexes of Benzenedithioles. Crystal structures of 1,2-benzenedithiolato-bis[triphenyl-phosphinegold(I)] and bis(triethylphosphine)gold(I) bis(1,2-benzenedithiolato)gold(III)

The reaction of 1,2- and 1,3-benzenedithiol C₆H₄(SH)₂ with chloro(phosphine)gold(I) complexes R₃PAuCl (R = Et, Ph) in the presence of triethylamine in tetrahydrofuran gives stable gold(I) complexes 1,2-C₆H₄(SAuPR₃)₂ [R = Et ( 1 ) and Ph ( 2 )] or 1,3-C₆H₄(SAuPPh₃)₂ ( 3 ), respectively, in high yield. The compounds have been characterized by analytical and NMR spectroscopic data. From the reaction of 1,2-C₆H(SH)₂ with Et₃P? AuCl a by-product [(Et₃P)₂Au]⁺ [Au(1,2? C₆H₄S₂)₂]^? ( 4 ) has also been isolated in low yield. The crystal structures of compounds 2 and 4 have been determined by single crystal X-ray diffraction. The gold(I) atoms in complex 2 are two-coordinate with bond angles S? Au? P of 175.2(1) and 159.5(1)°, Au? S bond distances of 2.304(1) and 2.321(1) å, and a short Au…?Au contact of 3.145(1) Å. The gold(I) atom in the cation of complex 4 is also linearly two-coordinate with a P? Au? P angle of 170.1(1) Å and Au? P distances of 2.296(3) and 2.298(3) Å. The geometry of the anion in 4 shows a square-planar coordination of gold(III) by two chelating 1,2-benzenedithiolate ligands with Au? S distances between 2.299(3) and 2.312(3) Å (for two crystallographically independent, centrosymmetrical anions in the unit cell).