Tunable Supramolecular Assembly and Photoswitchable Conversion of Cyclodextrin/Diphenylalanine‐Based 1D and 2D Nanostructures

A photocontrolled, interconvertible supramolecular 2D‐nanosheet/1D‐nanotube system was constructed through the supramolecular assembly of adamantanyl‐modified diphenylalanine with azobenzene‐bridged bis(β‐cyclodextrin). The nanosheet exhibited a greater fluorescence enhancement effect than the nanotube. Significantly, these nanosheets and nanotubes could interconvert via the photocontrolled trans/cis isomerization of azobenzene linkers in bis(β‐cyclodextrin), and this photo‐switchable one‐dimensional/two‐dimensional morphological interconversion was reversible and recyclable. This enables convenient routes to highly ordered nanostructures with various morphologies and dimensions that can be controlled by external stimuli.     

pH‐Responsive Pillar[6]arene‐based Water‐Soluble Supramolecular Hexagonal Boxes

We describe the preparation of the first water‐soluble pH‐responsive supramolecular hexagonal boxes (SHBs) based on multiple charge‐assisted hydrogen bonds between peramino‐pillar[6]arenes 2 with the molecular “lid” mellitic acid ( 1 a ). The interaction between 2 and 1 a , as well as the other “lids” pyromellitic and trimesic acids ( 1 b and 1 c , respecively) were studied by a combination of experimental and computational methods. Interestingly, the addition of 1 a to the complexes of the protonated form of pillar[6]arene 2 , that is, 3 , with bis‐sulfonate 4 a or 4 b , immediately led to guest escape along with the formation of closed 1 a₂2 supramolecular boxes. Moreover, the process of the openning and closing of the supramolecular boxes along with threading and escaping of the guests, respectively, was found to be reversible and pH‐responsive. This study paves the way for the easy and modular preparation of different SHBs that may have myriad applications.     

The Assembly of Supramolecular Boxes and Coordination Polymers Based on Bis‐Zinc‐Salphen Building Blocks

We report the assembly of supramolecular boxes and coordination polymers based on a rigid bis‐zinc(II)‐salphen complex and various ditopic nitrogen ligands. The use of the bis‐zinc(II)‐salphen building block in combination with small ditopic nitrogen ligands gave organic coordination polymers both in solution as well as in the solid state. Molecular modeling shows that supramolecular boxes with small internal cavities can be formed. However, the inability to accommodate solvent molecules (such as toluene) in these cavities explains why coordination polymers are prevailing over well‐defined boxes, as it would lead to an energetically unfavorable vacuum. In contrast, for relatively longer ditopic nitrogen ligands, we observed the selective formation of supramolecular box assemblies in all cases studied. The approach can be easily extended to chiral analogues by using chiral ditopic nitrogen ligands.     

Supramolecular Architectures by Fullerene‐Bridged Bis(permethyl‐β‐cyclodextrin)s with Porphyrins

The Hirsch–Bingel reaction of bis{4‐methyl[1,2,3]triazolyl}malonic ester‐bridged bis(permethyl‐β‐cyclodextrin) 1 with C₆₀ has led to the formation of a new fullerene‐bridged bis(permethyl‐β‐cyclodextrin) 2 , which has been comprehensively characterized by NMR spectroscopy, MALDI‐MS, and elemental analysis. Taking advantage of the high affinity between 2 and 5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphyrin ( 3 ) or [5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphinato]zinc(II) ( 4 ), linear supramolecular architectures with a width of about 2 nm and a length ranging from hundreds of nanometers to micron dimension were conveniently constructed and fully investigated by transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM). Significantly, the photoinduced electron‐transfer (PET) process between porphyrin and C₆₀ moieties takes place within the 2 ? 3 and 2 ? 4 supramolecular architectures under light irradiation, leading to the highly efficient quenching of the porphyrin fluorescence. The PET process and the charge‐separated state were investigated by means of fluorescence spectroscopy, fluorescence decay, cyclic voltammetry, and nanosecond transient absorption measurements.     

Mechanism of the Water–Gas Shift Reaction Catalyzed by Efficient Ruthenium‐Based Catalysts: A Computational and Experimental Study

Supported ionic liquid phase (SILP) catalysis enables a highly efficient, Ru‐based, homogeneously catalyzed water‐gas shift reaction (WGSR) between 100 °C and 150 °C. The active Ru‐complexes have been found to exist in imidazolium chloride melts under operating conditions in a dynamic equilibrium, which is dominated by the [Ru(CO)₃Cl₃]^? complex. Herein we present state‐of‐the‐art theoretical calculations to elucidate the reaction mechanism in more detail. We show that the mechanism includes the intermediate formation and degradation of hydrogen chloride, which effectively reduces the high barrier for the formation of the requisite dihydrogen complex. The hypothesis that the rate‐limiting step involves water is supported by using D₂O in continuous catalytic WGSR experiments. The resulting mechanism constitutes a highly competitive alternative to earlier reported generic routes involving nucleophilic addition of hydroxide in the gas phase and in solution.     

Solution Polymeric Optical Temperature Sensors with Long‐Term Memory Function Powered by Supramolecular Chemistry

A poly[(2‐ethyl‐2‐oxazoline)‐ran‐(2‐nonyl‐2‐oxazoline)] copolymer in combination with hydroxypropylated cyclodextrins has been demonstrated to lead to a supramolecular self‐assembly process that results in the formation of kinetically trapped thermoresponsive nanoparticles. Selection of the cyclodextrin type provides control over the nanoparticle phase‐transition thermodynamics, thus affording optical temperature sensors with an unprecedented, long‐term thermal memory function, which is reversible or irreversible. This research also sheds light onto kinetic and dynamic supramolecular assemblies, thus providing important insight because similar supramolecular processes are at the foundation of living matter.     

Design and Synthesis of a γ1β8‐Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier

We report the synthesis and characterization of a water‐soluble, star‐shaped macromolecular platform consisting of eight β‐cyclodextrin (β‐CD) units anchored to the narrower rim of a γ‐CD core through bis(triazolyl)alkyl spacers. The efficient synthetic protocol is based on the microwave (MW)‐promoted Cu‐catalyzed 1,3‐dipolar cycloaddition of CD monoazides to CD monoacetylenes. The ligand‐hosting capability of the construct has been assessed by relaxometric titration and nuclear magnetic relaxation dispersion (NMRD) profiling, which showed it to be good, and this was supported by molecular dynamics simulations. To demonstrate the feasibility of obtaining supramolecular structures with high hosting ability, we designed a dimeric platform, formed by joining two nonamers through the γ‐CD cores through a bis(lithocholic acid) linker. With a view to the potential biological applications, cytotoxicity and extent of binding to human serum albumin were assessed. The properties of this dendrimeric multicarrier make it suitable for pharmaceutical and diagnostic purposes, ranging from targeted drug delivery to molecular imaging.     

Concurrent Covalent and Supramolecular Polymerization

Covalent and supramolecular polymerizations, both of which offer their own unique advantages, have emerged as popular strategies for making artificial materials. Herein, we describe a concurrent covalent and supramolecular polymerization strategy—namely, one which utilizes 1) a bis‐azide‐functionalized diazaperopyrenium dication that undergoes polymeriation covalently with a bis‐alkyne‐functionalized biphenyl derivative in one dimension as a result of a rapid and efficient β‐cyclodextrin(CD)‐accelerated, cucurbit[6]uril(CB)‐templated azide–alkyne cycloaddition, while 2) the aromatic core of the dication is able to dimerize in a criss‐cross fashion by dint of π–π interactions, enabling simultaneous supramolecular assembly, resulting in an extended polymer network in an orthogonal dimension.     

Supramolecular Control on the Optical Properties of a Dye-Polyelectrolyte Assembly

Control of fluorescent molecular assemblies is an exciting area of research with large potential for various important applications, such as, fluorescence sensing/probing, cell imaging and monitoring drug-delivery. In the present contribution, we have demonstrated control on the extent of aggregation of a dye-polyelectrolyte assembly using a macrocyclic host molecule, sulfobutylether-β-cyclodextrin (SBE-β-CD). Initially, a cationic molecular rotor based organic dye, Auramine-O (AuO), undergoes aggregation in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS), and displays a broad intense new emission band along with large variation in its absorption features and excited-state lifetime. A manipulation of the monomer-aggregate equilibrium of the dye-polyelectrolyte assembly has been achieved by introducing a cyclodextrin based supramolecular host, SBE-β-CD, which leads to relocation of AuO molecules from polyelectrolyte (PSS) to supramolecular host cavity, owing to the formation of a host-guest complex between AuO and SBE-β-CD. A reversible control on this manipulation of monomer-aggregate equilibrium is further achieved by introducing a competitive guest for the host cavity i. e., 1-Adamantanol. Thus, we have demonstrated an interesting control on the dye-polyelectrolyte aggregate assembly using a supramolecular host molecule which open up exciting possibilities to construct responsive materials using a repertoire of various host-specific guest molecules.     

Self-assembly vesicles made from a cyclodextrin supramolecular complex

Self-assembly vesicles have been made from a cyclodextrin (CD) supramolecular complex, which is cooperatively formed with natural beta-CD, 1-naphthylammonium chloride (NA), and sodium bis(2-ethyl-1-hexyl)sulfosuccinate (AOT) by weak noncovalent interactions. In the complex structure, a NA molecule is included inside a beta-CD molecule while it is coupled with an AOT molecule on one side. The supramolecular structure and morphology of the vesicles were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mechanism of vesicle formation and transition is discussed along with the data obtained from induced circular dichroism (ICD) and UV/visible spectroscopy, polarized optical microscopy (POM), and (1)H NMR spectroscopy. Both the fabrication and the transition of vesicles are controlled by the inclusion equilibria and the cooperative binding of noncovalent interactions, which include the "key-lock" principle, electrostatic interactions, pi-pi stacking, and amphiphilic hydrophobic association.     

Metal Ion,Light, and Redox Responsive Interaction of Vesicles by a Supramolecular Switch

Chemical, photochemical and electrical stimuli are versatile possibilities to exert external control on self‐assembled materials. Here, a trifunctional molecule that switches between an “adhesive” and a “non‐adhesive” state in response to metal ions, or light, or oxidation is presented. To this end, an azobenzene–ferrocene conjugate with a flexible N,N′‐bis(3‐aminopropyl)ethylenediamine spacer was designed as a multistimuli‐responsive guest molecule that can form inclusion complexes with β‐cyclodextrin. In the absence of any stimulus the guest molecule induces reversible aggregation of host vesicles composed of amphiphilic β‐cyclodextrin due to the formation of intervesicular inclusion complexes. In this case, the guest molecule operates as a noncovalent cross‐linker for the host vesicles. In response to any of three external stimuli (metal ions, UV irradiation, or oxidation), the conformation of the guest molecule changes and its affinity for the host vesicles is strongly reduced, which results in the dissociation of intervesicular complexes. Upon elimination or reversal of the stimuli (sequestration of metal ion, visible irradiation, or reduction) the affinity of the guest molecules for the host vesicles is restored. The reversible cross‐linking and aggregation of the cyclodextrin vesicles in dilute aqueous solution was confirmed by isothermal titration calorimetry (ITC), optical density measurements at 600 nm (OD₆₀₀), dynamic light scattering (DLS), ζ‐potential measurements and cyclic voltammetry (CV). To the best of our knowledge, a dynamic supramolecular system based on a molecular switch that responds orthogonally to three different stimuli is unprecedented.     

Cucurbituril‐mediated immobilization of fluorescent proteins on supramolecular biomaterials

The reversible introduction of functionality at material surfaces is of interest for the development of functional biomaterials. In particular, the use of supramolecular immobilization strategies facilitates mild reaction and processing conditions, as compared to other covalent analogues. Here, the engineering of multicomponent supramolecular materials, beyond the use of a single supramolecular entity is proposed. Cucurbit[8]uril (Q8) mediated host–guest chemistry is combined with hydrogen bonding supramolecular 2‐ureido‐4‐pyrimidinone (UPy)‐based materials. The modular incorporation of a UPy‐additive that presents one guest to incorporate into the Q8 host allows for selective supramolecular functionalization at the water–polymer material interface. Supramolecular ternary complex formation at the material surface was studied by X‐ray photoelectron spectroscopy, which as a result of large overlap in atomic composition of the different components showed minor changes is surface composition upon complex formation. Surface MALDI‐ToF MS measurements revealed useful insights in the formation of complexes. Protein immobilization was monitored using both fluorescence spectroscopy and quartz crystal microbalance with dissipation monitoring, which successfully demonstrated ternary complex formation. Although proteins could selectively be immobilized onto the surfaces, control of the system's stability remains a challenge as a result of the dynamicity of the host–guest assembly. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3607–3616     

Synthesis and Characterization of a Novel,Mesoporous Organosilica with Additional Cyclodextrin‐Based Micropores

Summary: A novel mesoporous organosilica with additional cyclodextrin‐based micropores has been synthesized from tetraethoxysilane (TEOS) and cyclodextrin‐based silane monomer precursors and triblock PEO‐PPO‐PEO (poly(ethylene oxide)‐poly(propylene oxide)‐ poly(ethylene oxide)) copolymer P123 as the structure‐directing template with the aid of sodium chloride and the supramolecular assembly of cyclodextrins with P123.

The synthesis of CD‐Si‐2%.     

Synthesis,structural and spectral properties of Au complexes: luminescence properties and their non‐covalent DNA binding studies

Gold complexes of 1,3‐ bis‐pyridylimidazolium chloride ( L1 ), 1,3‐bis‐[2,6‐diisopropylphenyl]imidazolium chloride ( L2 ) and 1,3‐bis‐[benzyl]benzimidazolium chloride ( L3 ) were synthesized and characterized by analytical methods. For the complexes, electronic spectral results show that there is a marked difference in the band feature observed in the spectra, ascribed to the greater relativistic effect of gold. In fluorescence studies, the complexes develop emission bands in the visible region (400–600 nm) after excitation at around 350 nm. Au complex–DNA binding was studied, and it was observed that genomic DNA isolated from the U373‐GB cell line was fragmented and in some cases degraded by the Au complexes. Furthermore, the intensity of the DNA band increased when concentration of the metal complex was augmented. This study shows that the DNA cleavage is mediated by the Au complex. Copyright © 2013 John Wiley & Sons, Ltd.     

Photocontrolled Reversible Conversion of Nanotube and Nanoparticle Mediated by β‐Cyclodextrin Dimers

A photochemically interconvertible supramolecular nanotube–nanoparticle system was constructed through secondary assembling of self‐aggregates of amphiphilic porphyrin derivatives mediated by trans‐ and cis‐azobenzene‐bridged bis(permethyl‐β‐cyclodextrin). Significantly, these nanotubes and nanoparticles were able to interconvert upon irradiation at different wavelengths, and this photocontrolled morphological conversion is reversible and recyclable for tens of times, which will provide a feasible and convenient way to construct the ordered nanostructure with various morphologies that can be smartly controlled by the environmentally benign external stimulus.     

Reversible Supramolecular Surface Attachment of Enzyme–Polymer Conjugates for the Design of Biocatalytic Filtration Membranes

To be used successfully in continuous reactor systems, enzymes must either be retained using filtration membranes or immobilized on a solid component of the reactor. Whereas the first approach requires large amounts of energy, the second approach is limited by the low temporal stability of enzymes under operational conditions. To circumvent these major stumbling blocks, we have developed a strategy that enables the reversible supramolecular immobilization of bioactive enzyme–polymer conjugates at the surface of filtration membranes. The polymer is produced through a reversible addition–fragmentation transfer method; it contains multiple adamantyl moieties that are used to bind the resulting conjugate at the surface of the membrane which has surface‐immobilized cyclodextrin macrocycles. This supramolecular modification is stable under operational conditions and allows for efficient biocatalysis, and can be reversed by competitive host–guest interactions.     

Supra‐dendron Gelator Based on Azobenzene–Cyclodextrin Host–Guest Interactions: Photoswitched Optical and Chiroptical Reversibility

A novel amphiphilic dendron ( AZOC₈GAc ) with three l ‐glutamic acid units and an azobenzene moiety covalently linked by an alkyl spacer has been designed. The compound formed hydrogels with water at very low concentration and self‐assembled into chiral‐twist structures. The gel showed a reversible macroscopic volume phase transition in response to pH variations and photo‐irradiation. During the photo‐triggered changes, although the gel showed complete reversibility in its optical absorptions, only an incomplete chiroptical property change was achieved. On the other hand, the dendron could form a 1:1 inclusion complex through a host–guest interaction with α‐cyclodextrin (α‐CD), designated as supra‐dendron gelator AZOC₈GAc/α‐CD . The supra‐dendron showed similar gelation behavior to that of AZOC₈GAc , but with enhanced photoisomerization‐transition efficiency and chiroptical switching capacity, which was completely reversible in terms of both optical and chiroptical performances. The self‐assembly of the supra‐dendron is a hierarchical or multi‐supramolecular self‐assembling process. This work has clearly illustrated that the hierarchical and multi‐supramolecular self‐assembling system endows the supramolecular nanostructures or materials with superior reversible optical and chiroptical switching.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.     

A Host–Guest Supramolecular Complex with Photoregulated Delivery of Nitric Oxide and Fluorescence Imaging Capacity in Cancer Cells

Herein we report the design, preparation, and properties of a supramolecular system based on a tailored nitric oxide (NO) photodonor and a rhodamine‐labeled β‐cyclodextrin conjugate. The combination of spectroscopic and photochemical experiments shows the absence of significant interchromophoric interactions between the host and the guest in the excited states. As a result, the complex is able to release NO under the exclusive control of visible light, as unambiguously demonstrated by direct detection of this transient species through an amperometric technique, and exhibits the typical red fluorescence of the rhodamine appendage. The supramolecular complex effectively internalizes in HeLa cancer cells as proven by fluorescence microscopy, shows a satisfactory biocompatibility in the dark, and induces about 50 % of cell mortality upon irradiation with visible light. The convergence of all these properties in one single complex makes the present host–guest ensemble an appealing candidate for further delevopment of photoactivatable nanoscaled systems addressed to photostimulated NO‐based therapy.     

Responsive Supramolecular Polymers Based on the Bis[alkynylplatinum(II)] Terpyridine Molecular Tweezer/Arene Recognition Motif

Supramolecular polymers are constructed based on the novel bis[alkynylplatinum(II)] terpyridine molecular tweezer/pyrene recognition motif. Successive addition of anthracene as the diene and cyano‐functionalized dienophile triggers the reversible supramolecular polymerization process, thus advancing the concept of utilizing Diels–Alder chemistry to access stimuli‐responsive materials in compartmentalized systems.