From a Molecular 2Fe‐2Se Precursor to a Highly Efficient Iron Diselenide Electrocatalyst for Overall Water Splitting

A highly active FeSe₂ electrocatalyst for durable overall water splitting was prepared from a molecular 2Fe‐2Se precursor. The as‐synthesized FeSe₂ was electrophoretically deposited on nickel foam and applied to the oxygen and hydrogen evolution reactions (OER and HER, respectively) in alkaline media. When used as an oxygen‐evolution electrode, a low 245 mV overpotential was achieved at a current density of 10 mA cm⁻², representing outstanding catalytic activity and stability because of Fe(OH)₂/FeOOH active sites formed at the surface of FeSe₂. Remarkably, the system is also favorable for the HER. Moreover, an overall water‐splitting setup was fabricated using a two‐electrode cell, which displayed a low cell voltage and high stability. In summary, the first iron selenide material is reported that can be used as a bifunctional electrocatalyst for the OER and HER, as well as overall water splitting.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe−Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm⁻² at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec⁻¹ for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm⁻² due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.     

Carbon‐Based Metal‐Free Catalysts for Electrocatalysis beyond the ORR

Besides their use in fuel cells for energy conversion through the oxygen reduction reaction (ORR), carbon‐based metal‐free catalysts have also been demonstrated to be promising alternatives to noble‐metal/metal oxide catalysts for the oxygen evolution reaction (OER) in metal–air batteries for energy storage and for the splitting of water to produce hydrogen fuels through the hydrogen evolution reaction (HER). This Review focuses on recent progress in the development of carbon‐based metal‐free catalysts for the OER and HER, along with challenges and perspectives in the emerging field of metal‐free electrocatalysis.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Air-Stable Mn doped CuCl/CuO Hybrid Triquetrous Nanoarrays as Bifunctional Electrocatalysts for Overall Water Splitting

The development of highly efficient non-precious metal catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is key for large-scale hydrogen evolution through water splitting technology. Here, we report an air-stable Cu-based nanostructure consisting of Mn doped CuCl and CuO (CuCl/CuO(Mn)-NF) as a dual functional electrocatalyst for water splitting. CuCl is identified as the main active component, together with Mn doping and the synergistic effect between CuCl and CuO are found to make responsibility for the excellent OER and HER catalytic activity and stability. The assembled electrolyzes also exhibit decent water splitting performance. This work not only provides a simple method for preparing Cu-based composite catalyst, but also demonstrates the great potential of Cu-based non-noble metal electrocatalysts for water splitting and other renewable energy conversion technologies.     

High-performance electrocatalyst of vanadium-iron bimetal organic framework arrays on nickel foam for overall water splitting

The development of active,low-cost and durable bifunctional electrocatalysts toward both oxygen evolution reaction(OER) and hydro gen evolution react ion(HER) a re important for overall water splitting.Here,well-defined arrays of vanadium-iron bimetal organic frameworks(VFe-MOF) with controllable stoichiometry have been successfully prepared on nickel foam(NF).The as-fabricated VFe-MOF@NF electrode exhibits excellent electrocatalytic activity and durability for OER and HER in alkaline medium.The material's overpotentials of 10 mA/cm~2 are 246 mV for OER and 147 mV for HER,respectively.The electrolyzer made from the VFe-MOF@NF electrodes as both the cathode and anode in 1 mol/L KOH needs only a voltage of 1.61 V to reach a current density of 10 mA/cm~2.The superior performance of VFeMOF@NF can be attributed to the morphological control and electronic regulation of the bimetals,that is,1) the exposure of the active sites at electrocatalyst/electrolyte interfaces due to the array structure;2)the synergistic effect of vanadium and iron metals on electro-catalyzing the overall water splitting.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s⁻¹ for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s^?1 for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

非晶非贵金属催化剂的研究进展及展望

近年来电解水产氢作为一种具有前景的制备及储存可再生能源的方法受到了各界的广泛关注.在此过程中,电解水催化剂是提高能源转换效率的关键.优秀的催化剂应具备高催化活性、高稳定性、低成本以及可大规模生产等性质.科研工作者对电解水的两部分反应,即析氢反应以及析氧反应均进行了广泛及深入的研究.目前,贵金属催化剂,如铂基、钌基催化剂的催化活性要高于其他元素催化剂,但由于其价格昂贵,储量较少使得贵金属催化剂无法得到大规模应用,因此发展非贵金属催化剂对绿色能源的发展具有重要意义.一般而言,催化剂的结晶度越高,其催化活性越好,而近年来非晶催化剂以其更高的催化活性位密度也越来越受到人们的重视.同时,非晶催化剂的成分更加灵活,相比晶体催化剂来说非晶催化剂可以在更大范围内对成分进行调节.此外,非晶催化剂的制备通常都在较为温和的反应条件下进行,这也能够降低生成成本,促进其工业化发展.在这篇综述里我们介绍了电解水反应的基本原理,总结了近期非晶析氢、析氧以及双功能催化剂的研究进展.并随后探讨了电解水反应目前的难点并对非晶催化剂的制备进行了展望.     

Boosting Hydrogen Production by Anodic Oxidation of Primary Amines over a NiSe Nanorod Electrode

For electrocatalytic water splitting, the sluggish anodic oxygen evolution reaction (OER) restricts the cathodic hydrogen evolution reaction (HER). Therefore, developing an alternative anodic reaction with accelerating kinetics to produce value‐added chemicals, especially coupled with HER, is of great importance. Now, a thermodynamically more favorable primary amine (?CH₂?NH₂) electrooxidation catalyzed by NiSe nanorod arrays in water is reported to replace OER for enhancing HER. The increased H₂ production can be obtained at cathode; meanwhile, a variety of aromatic and aliphatic primary amines are selectively electrooxidized to nitriles with good yields at the anode. Mechanistic investigations suggest that Ni^II/Ni^III may serve as the redox active species for the primary amines transformation. Hydrophobic nitrile products can readily escape from aqueous electrolyte/electrode interface, avoiding the deactivation of the catalyst and thus contributing to continuous gram‐scale synthesis.     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

Amorphous porous sulfides nanosheets with hydrophilic/aerophobic surface for high-current-density water splitting

The rational construction of electrocatalysts with desired features is significant but challenging for superior water splitting at high current density. Herein, amorphous CoNiS nanosheets are synthesized on nickel foam (NF) through a facile structure evolution strategy and present advanced performance at high current densities in water splitting. The high catalytic activity can be attributed to the sufficient active sites exposed by the flexible amorphous configuration. Moreover, the hydrophilicity and aerophobicity of a-CoNiS/NF promote surface wettability of the self-supporting electrode and avoid the aggregation of bubbles, which expedites the diffusion of electrolyte and facilitates the mass transfer. As a result, the optimized electrode demonstrates low overpotentials of 289 and 434 mV at 500 mA/cm² under alkaline conditions for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Impressively, an electrolytic water splitting cell assembled by bifunctional a-CoNiS/NF operates with a low cell voltage of 1.46 V@10 mA/cm² and reaches 1.79 V at 500 mA/cm². The strategy sheds light on a competitive platform for the reasonable design of non-precious-metal electrocatalysts under high current density.     

磁场效应对理解水分解反应物的可能意义

电催化水分解由两个基元反应构成,即析氢反应(HER)和析氧反应(OER).开发强大的HER和OER技术需要在分子层面理解反应机理,然而,目前水分解反应的反应物还没有完全确定.本文利用磁场来研究HER中的质子传输和OER中的氢离子传输,对确定HER和OER中真实的反应物具有重要意义.磁场是改变离子等带电物质运动的一种有效...     

The preparation of ionic liquid based iron phosphate/CNTs composite via microwave radiation for hydrogen evolution reaction and oxygen evolution reaction

Water electrolysis is a promising method for hydrogen production, so the preparation of low-cost and efficient electrocatalysts with a quick and simple procedure is crucial. Herein, iron phosphate (Fe₇(PO₄)₆) was prepared via microwave radiation using ionic liquid (IL) as iron and phosphorus dual-source. This method is simple and rapid, and the product can be directly used as electrocatalysts without further treatment. The experimental results show that the IL can influence the morphology and electrocatalytic performance. Moreover, the addition of carbon nanotubes (CNTs) is favorable for formation of iron phosphate nanoparticles to improve the catalytic activities. As hydrogen evolution reaction (HER) catalyst, this iron phosphate/CNTs exhibits an onset overpotential of 120 mV, Tafel slope of 32.9 mV dec^-1, and current densities of 10 mA cm⁻² at overpotential of 185 mV. Then, it obtains a good activity for oxygen evolution reaction (OER) with a low onset potential of 1.48 V, Tafel slope of 73.3 mV dec^-1, and it only needs an overpotential of 300 mV to drive the 10 mA cm⁻². This bifunctional catalyst also shows good durability for HER and OER. This microwave-assisted method provides an outstanding strategy to prepare iron phosphate in a simple and fast process with good catalytic performance for water splitting.     

3D ordered macro-/mesoporous Ni_xCo_(100-x) alloys as high-performance bifunctional electrocatalysts for overall water splitting

Electrochemical water splitting is a facile and effective route to generate pure hydrogen and oxygen.However,the sluggish kinetics of hydrogen evolution reaction(HER) and especially oxygen evolution reaction(OER) hinder the water splitting efficiency.Meanwhile,the high-cost of noble-metal catalysts limit their actual application.It is thus highly urgent to exploit an economical and earthabundant bifunctional HER and OER electrocatalyst to simplify procedure and reduce cost.Herein,we synthesize the three-dimensionally ordered macro-/mesoporous(3 DOM/m) Ni_xCo_(100-x) alloys with distinctive structure and large surface area via a dual-templating technique.Among them,the3 DOM/m Ni_(61)Co_(39) shows the lowest overpotentials of 121 mV and 241 mV at 10 mA/cm~2 for HER and OER,respectively.Furthermore,when employed for water splitting,the Ni_(61)Co_(39) only requires 1.60 V to approach 10 mA/cm2 and presents excellent stability.These encouraging performances of the Ni_(61)Co_(39)render it a promising bifunctional catalyst for overall water splitting.     

Non-precious metal-based integrated electrodes for overall alkaline water splitting

A bifunctional electrocatalyst interface requires a superior charge transfer and good electric conductivity to produce an efficient and stable water splitting reaction. In the context of controlling the electrochemical activity of bifunctional catalytic materials, we demonstrate a novel approach to bridge conductive C-Qd-Mn interfaces with precise control. The excellent performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be dominantly attributed to the unique structure of C-Qds-Mn, which provides abundant active sites and facilitates electron transfer between electrode and electrolyte. Eco-friendly C-Qds were synthesized using a large-scale thermal assisted technique and utilized as electrocatalysts with Mn₃O₄ in alkaline splitting ToF (Turn over Frequency) calculation to make an effective combination. Due to their increased ECSA, conductivity, and electron-hole transfer, the prepared C-Qds-Mn delivered excellent HER/OER (0.494 V/1.6671V) activity, lower Standard deviation 0.006 V and 0.009V, surpassing the 10 mA limit comparable to commercially.