Fluorinated phosphorus compounds: Part 9. The reactions of bis(fluoroalkyl) phosphorochloridates with oxygen nucleophiles

Twenty nine bis(fluoroalkyl) phosphates (R_FO)₂P(O)OR were prepared in 18-75% yield by treating phosphorochloridates (R_FO)₂P(O)Cl, where R_F was HCF₂CH₂, HCF₂CF₂CH₂, H(CF₂)₄CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH and (CH₃)₂CF₃C with methanol, ethanol, propanol and isopropanol in diethyl ether in the presence of triethylamine. The bulky chloridate [(CH₃)₂CF₃CO]₂P(O)Cl reacted with methanol, ethanol and propanol, but not with isopropanol - even on heating in the presence of the catalyst 4-dimethylaminopyridine - due to steric hindrance at phosphorus. The relative reactivities of three of the chloridates decreased in the order [(CF₃)₂CHO]₂P(O)Cl > [(FCH₂)₂CHO]₂P(O)Cl > [(CH₃)₂CF₃CO]₂P(O)Cl. Also described is the synthesis of phosphates (CF₃CH₂O)₂P(O)OCH₂R, where R = CH₂Br, CH₂Cl, CH₂F and CHF₂, and diphosphates [H(CF₂)_nCH₂O]₂P(O)OCH₂(CF₂)₂CH₂OP(O)[OCH₂(CF₂)_nH]₂, where n = 1, 2 and 4.     

Fluorinated phosphorus compounds: Part 7. The reactions of bis(fluoroalkyl) phosphorochloridates with nitrogen nucleophiles

Forty bis(fluoroalkyl) phosphoramidates (R_FO)₂P(O)R were prepared in 10-91% yield by treating phosphorochloridates (R_FO)₂P(O)Cl where R_F was HCF₂CH₂, HCF₂CF₂CH₂, HCF₂CF₂CF₂CF₂CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH and (CH₃)₂CF₃C with nucleophiles HR, where R was NH₂, NHMe, NMe₂, NHEt and NEt₂ in diethyl ether at 0-5 °C. The bulky chloridate [(CH₃)₂CF₃CO]₂P(O)Cl reacted with ammonia, methylamine, dimethylamine and ethylamine, but not with diethylamine—even on heating in the presence of 4-dimethylaminopyridine—due to steric hindrance at phosphorus. Fluorinated phosphoramidates have lower basicity and nucleophilicity than their unfluorinated counterparts: (EtO)₂P(O)NH₂ is more easily hydrolysed by HCl than (CF₃CH₂O)₂P(O)NH₂ and whereas, (EtO)₂P(O)NH₂ is known to react with oxalyl chloride and thionyl chloride to give (EtO)₂P(O)NCO and (EtO)₂P(O)NSO respectively, (CF₃CH₂O)₂P(O)NH₂ reacted only with oxalyl chloride to give (CF₃CH₂O)₂P(O)NCO in 10% yield. Two other new fluorinated species, (CF₃CH₂O)₂P(O)NHOMe and (CF₃CH₂O)₂P(O)N₃, were prepared by nucleophilic substitution of bis(trifluoroethyl) phosphorochloridate with methoxyamine and azide ion.     

Fluorinated phosphorus compounds: Part 6. The synthesis of bis(fluoroalkyl) phosphites and bis(fluoroalkyl) phosphorohalidates

Reaction of phosphorus trichloride with tert-butanol and fluoroalcohols gave bis(fluoroalkyl) phosphites (R_FO)₂P(O)H in 42-89% yield, where R_F=HCF₂CH₂, H(CF₂)₂CH₂, H(CF₂)₄CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH, CF₃(CH₃)₂C, (CF₃)₂CH₃C, CF₃CH₂CH₂, C₄F₉CH₂CH₂ and C₆F₁₃CH₂CH₂. Treatment of these with chlorine in dichloromethane gave the bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl in 49-96% yield. The chloridate (CF₃CH₂O)₂P(O)Cl was isolated in much lower yield from the interaction of thionyl chloride with bis(trifluoroethyl) phosphite. Heating the latter in dichloromethane with potassium fluoride and a catalytic amount of trifluoroacetic acid gave the corresponding fluoridate (CF₃CH₂O)₂P(O)F in 84% yield. Treatment of bis(trifluoroethyl) phosphite with bromine or iodine gave the bromidate (CF₃CH₂O)₂P(O)Br and iodidate (CF₃CH₂O)₂P(O)I in 51 and 46% yield, respectively. The iodidate is the first dialkyl phosphoroiodidate to have been isolated and characterised properly—its discovery lags behind the first isolation of a dialkyl phosphorochloridate by over 130 years. The fluoroalkyl phosphoryl compounds are generally more stable than known unfluorinated counterparts.     

Synthesis,structure and spectroelectrochemical property of (2,2′-bipyridine)–metal (M = Pt,Pd) dichloride with 4,4′-bis(fluorous-ponytail) on bipyridine

The 4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy ligands [R_f = n-C₃F₇ (1a), HCF₂(CF₂)₃ (1b)] were prepared and then treated with [MCl₂(CH₃CN)₂] (M = Pt or Pd) to result in the corresponding metal complexes, [MCl₂(4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy)] (M = Pt 2a–b; Pd 3a–b). Both ligands and metal complexes were fully characterized by multi-nuclei NMR (¹H, ¹⁹F and ¹³C), FTIR, and mass (GC/MS or HR-FAB) methods. The X-ray structures of 2a–b and 3a–b were studied. With terminal CF₃, the structures of 2a and 3a exhibit disordered polyfluorinated regions in solid state. With terminal HCF₂, the structures of 2b and 3b show a π–π stacking of the bpy planes, five-membered C–H···O hydrogen bond and an unusual intramolecular blue-shifting C–H···F–C hydrogen bond system, whereas without terminal HCF₂, the structures of 2a and 3a show the similar π–π stacking, five-membered C–H···O hydrogen bond and typical orientation of polyfluorinated ponytails, but not the C–H···F–C hydrogen bond system. The CV and UV/Vis studies were also carried out.     

Atmospheric chemistry of CCl2FCH2CF3 (HCFC-234fb): Kinetics and mechanism of reactions with Cl atoms and OH radicals

The atmospheric chemistry of CCl₂FCH₂CF₃ (HFCF-234fb) was examined using FT-IR/relative-rate methods. Hydroxyl radical and chlorine atom rate coefficients of k(CCl₂FCH₂CF₃+OH)= (2.9 ± 0.8) × 10⁻¹⁵ cm³ molecule^–1 s^–1 and k(CCl₂FCH₂CF₃+Cl)= (2.3 ± 0.6) × 10⁻¹⁷ cm³ molecule^–1 s^–1 were determined at 297 ± 2 K. The OH rate coefficient determined here is two times higher than the previous literature value. The atmospheric lifetime for CCl₂FCH₂CF₃ with respect to reaction with OH radicals is approximately 21 years using the OH rate coefficient determined in this work, estimated Arrhenius parameters and scaling it to the atmospheric lifetime of CH₃CCl₃. The chlorine atom initiated oxidation of CCl₂FCH₂CF₃ gives C(O)F₂ and C(O)ClF as stable secondary products. The halogenated carbon balance is close to 80% in our system. The integrated IR absorption cross-section for CCl₂FCH₂CF₃ is 1.87 × 10⁻¹⁶ cm molecule⁻¹ (600–1600 cm⁻¹) and the radiative efficiency was calculated to 0.26 W m⁻² ppb¹. A 100-year Global Warming Potential (GWP) of 1460 was determined, accounting for an estimated stratospheric lifetime of 58 years and using a lifetime-corrected radiative efficiency estimation.     

Darstellung von polyfluororganotrichlorsilanen

The following substances could be prepared by Grignard reactions or by conversions with trichlorosilane: C₆F₅CH₂CHCH₂, C₆F₅(CH₂)₃SiCl₃, CF₃(CF₂)₉CH₂CHCH₂, CF₃(CF₂)₇(CH₂)₂SiCl₃, CF₃(CF₂)₁₁(CH₂)₃CHCH₂ und CF₃(CF₂)₁₁(CH₂)₅SiCl₃.They were characterized by spectroscopical and microanalytical methods.     

Contributions of hydrocarbon radicals and functional groups of organic molecules to enthalpies of their solvation in mixed water—tert-butyl alcohol solvents

The contributions of hydrocarbon radicals (−CH₃, >CH₂, >CH−, >C<) and functional groups (−OH, −OCOO−, −NO₂, −CN, >SO) to the enthalpies of solvation of organic molecules in mixed water—tert-butyl alcohol solvents were calculated in the whole range of compositions at 298.15 K. The influence of the composition and properties of the mixture on the solvation of different functional groups is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1811–1814, October, 1997.     

5H-3-oxa-Octafluoropentanesulfonyl fluoride: a novel and efficient condensing agent for esterification, amidation and anhydridization

The use of 5H-3-oxa-octafluoropentanesulfonyl fluoride (HCF₂CF₂OCF₂CF₂SO₂F) as a novel and efficient condensing reagent for esterification of carboxylic acids with alcohols and amidation of carboxylic acids with amines in the presence of 1,3-diazabicyclo[5.4.0]-undec-7-ene (DBU) is reported. HCF₂CF₂OCF₂CF₂SO₂F cannot serve as a condensing agent for anhydridization of carboxylic acids, however, HCF₂CF₂OCF₂CF₂SO₂F/(CH₃)₃SiCN system can mediate anhydridization of some aromatic carboxylic acids.     

Synthesis and properties of fluorous arenes and triaryl phosphorus compounds with branched fluoroalkyl moieties (“split pony tails”)

Most compounds designed for immobilization in fluorous media feature linear pony tails of the formula (CH₂)_m(CF₂)_n−1CF₃ [(CH₂)_mR_fn]. This paper presents a first-generation approach to compounds with branched or “split” pony tails of the formula (CH₂)_lCH[(CH₂)_mR_fn]₂. Allyl tri(n-butyl)tin is reacted twice with perfluorooctyl iodide (R_f8I; first, photochemical, 78-81%; second, thermal with radical initiator, 71%; 13-18 g scales) to give the secondary alkyl iodide ICH(CH₂R_f8)₂ (3). A subsequent Ni(Cl)₂(PPh₃)₂-catalyzed reaction with allyl tri(n-butyl)tin yields the branched alkene H₂CCHCH₂CH(CH₂R_f8)₂ (74%). A palladium-catalyzed Heck coupling with OP(p-C₆H₄Br)₃ gives the fluorous phosphine oxide OP(p-C₆H₄CHCHCH₂CH(CH₂R_f8)₂)₃ (84%), and Pd/C-catalyzed hydrogenation affords OP(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃ (>99%). Reduction with SiHCl₃ gives P(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃, which is protected as the air-stable borane adduct H₃B·P(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃ (9, 64%). The CF₃C₆F₁₁/toluene partition coefficient of 9 is much higher than that of the analog with p-(CH₂)₃R_f8 groups (96.6:3.4 versus 37.3:62.7). The iodide 3 is unreactive towards PAr₃ at 175-250 °C. However, a CuBr-catalyzed reaction with C₆H₅MgBr gives C₆H₅CH(CH₂R_f8)₂, which also exhibits a high partition coefficient (97.9:2.1).     

Dehydroxylative Trifluoromethylthiolation,Trifluoromethylation, and Difluoromethylation of Alcohols

Summary of main observation and conclusion CF3S,CF3 and HCF2 groups have been identified as valuable functionalities for drug development.Despite significant accomplishments in the trifluoromethylthiolation,trifluoromethylation and d讦luoromethylation reactions,directly converting common functional groups into CF3S,CF3 or HCF2 groups is still highly desirable.     

Reaction of benzyl chloride with propylene and trifluoropropene under metallocomplex initiation conditions

The reactions of benzyl chloride with propylene and 3,3,3-trifluoropropene in the presence of Fe(CO)₅ ` + DMF were studied. With propylene, the reaction stops at the addition stage with the simultaneous formation of dibenzyl. In the case of 3,3,3-trifluoropropene, a telomerization takes place, whereby the second growing radical C₆H₅CH₂CH₂CH(CF₃)CH₂HCF₃ practically completely isomerizes with a 1,5-migration into the radical C₆H₅HCH₂CH(CF₃)CH₂CH₂CF₃. To confirm the structure of the isolated compounds, chromato-mass-spectrometry and¹³C NMR were used.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1384–1388, June, 1991.     

Study on thermal degradation mechanisms of comb polyacrylates containing long fluorocarbon side chains by TG/FTIR

Thermal degradation of two series of polyacrylates containing long fluorocarbon chains [abbr.: PF_nA {HCF₂(CF₂)_n−1  CH₂ O C(O) , n = 4, 6, 8, 10} and abbr.: PFF_nEA {CF₃(CF₂)_n−1  CH₂CH₂ O C(O) , n = 6, 8, 10}] was investigated by TG /FTIR. Thermal degradation behavior of polymers changed depending on the type of tie groups, which link the fluorocarbon chains to the main chain, and also on the length of fluorocarbon chains. It was clarified that the apparent activation energies (ΔE_a ) of PF_nA series obtained by Ozawa's method varied in the order of PF₄A > PF₆A > PF₈A > PF₁₀A, while those of PFF_nEA series having tie group of  CH₂ CH₂ O C(O) were almost constant. The results for PF_nA series (tie group:  CH₂ O C(O) ) are attributable to the shield effect of long fluorocarbon chains on the back‐biting reaction in the thermal degradation of comb polymers rather than the change of C C bond dissociation energy in the main chain. It was found that TG curves of PFF_nEA series were shifted to the lower temperature region than those of PF_nA. This result can be attributable to the scission of side groups followed by the evaporation of fluorocarbon compounds and carbon dioxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2794–2803, 2000     

Reactions of 2,2-bis(trifluoromethyl)oxirane with alcohols under phase transfer catalysis

It was demonstrated that the reaction of 2,2-bis(trifluoromethyl)oxirane (1) with variety of alcohols could be successfully carried out under phase transfer catalysis conditions using sodium or potassium hydroxide as a base. For example, reaction of CH₃OH, C₂H₅OCH₂CH₂OH, HOCH₂CH₂OH with one or two moles of 1 in the presence of the catalyst [(C₄H₉)₄N⁺HSO₄⁻] gives the corresponding tertiary alcohols R[OCH₂C(CF₃)₂OH]_n (n=1 or 2) in 43-53% yield, along with some O[CH₂C(CF₃)₂OH]₂. Benzyl alcohol and phenol under similar conditions are less active, producing in the reaction with 1 the corresponding adducts ArOCH₂C(CF₃)₂OH in 31-35% yield. Fluorinated alcohols, such as CF₃CH₂OH, ClCF₂CH₂OH, HCF₂CF₂CH₂OH have much higher reactivity towards 1 giving ring opening products in 82-97% yield. Even in the reaction of hindered hexafluoro-iso-propanol the corresponding adduct was isolated in 43% yield. Surprisingly, the reaction of iso-propanol and epoxide 1, results in the formation of O[CH₂C(CF₃)₂OH]₂ as a major product, isolated in 56% yield. Possible mechanism for the formation of the last product was proposed.     

Perfluoroalkylated Calix[4]pyrroles: Fluoride Ion Extraction from an Aqueous Medium

Octaalkenyl calix[4]pyrrole ((CH₂=CH(CH₂)₂)₈C4P) is highly useful for the postfunctionalization of different calix[4]pyrroles with desired functionalities. Functionalization with perfluoroalkyl chains [CF₃(CF₂)_n ; R_fn ] gave perfluoroalkyl calix[4]pyrroles (R_fn (CH₂)₄)₈C4P; n =6, 8), having >60 % fluorine content, which created a hydrophobic environment inside the calix[4]pyrrole cavity and recognized fluoride and chloride ions in solution as well as in the solid state. The fluoride ion is extracted efficiently from aqueous CsF and TBAF solutions by using (R_f6(CH₂)₄)₈C4P, as droplets. The fluorinated chain generated a hydrophobic environment which broke the hydration shell associated with the anion and separated out fluoride ions as droplets from aqueous medium. Furthermore, the fluoride ions competitively replaced chloride ions from the (R_f6(CH₂)₄)₈C4P cavity.     

Synthesis and catalytic properties of polynuclear molybdenum silicon-containing carbene complexes

The molybdenum silicon-containing carbene complexes PhMe₂Si—CH=Mo(NAr)(OR)₂ (1), Ph₂Si[CH=Mo(NAr)(OR)₂]₂ (2), and (RO)₂(ArN)Mo=CH—(SiMe₂)₂—CH=Mo(NAr)(OR)₂ (Ar = 2,6-Prⁱ ₂C₆H₃; R = CMe₂CF₃) were synthesized by the reaction of the R′— CH=Mo(NAr)(OR)₂ compounds (R′ = Bu^t or PhMe₂C) with silicon-containing vinyl reagents. The structures of complexes 1 and 2 and the known PhMe₂C—CH=Mo(NAr)(OCMe₂CF₃)₂ compound were established by X-ray diffraction. The catalytic properties of the silicon-containing carbene complexes in homometathesis of hex-1-ene and metathesis polymerization of cyclooctene were studied. The catalytic activity of these complexes and the stereoregularity of the resulting polyoctenamers substantially depend on the nature of the substituent at the carbene carbon atom. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 247–252, February, 2007.     

Chain-transfer constant of fluoroalcohols

Chain transfer constants of some fluoroalcohols [HCF₂(CF₂)_n?1CH₂OH, n = 2, 4, 6] in the catalyzed polymerization of vinyl acetate, styrene, acrylonitrile, and methyl methacrylate at 60°C have been evaluated by a method based on degree of polymerization. Since fluoroalcohols are normally nonsolvents for polymers, a homogeneous reaction phase is maintained by carrying out the polymerization in benzene (except in case of acrylonitrile, where no solvent was used). The transfer constants vary, depending on the reactivity as well as the polarity of the radicals, in the following order: vinyl acetate > styrene > methyl methacrylate > acrylonitrile. Of the three fluoroalcohols studied, the transfer constants increase with the increasing value of n. The results have been interpreted in terms of polar structure contribution in the transition state of the transfer reactions.     

Synthesis and properties of gemini-type hydrocarbon-fluorocarbon hybrid surfactants

Gemini-type hybrid surfactants with two fluorocarbon chains connected through a hydrocarbon spacer, F(CF₂)_m(CH₂)₂CH(OSO₃Na)(CH₂)_nCH(OSO₃Na)(CH₂)₂(CF₂)_mF [Fm(Hn)FmOS, m = 4, 6; n = 5, 6, 7, 8)], were synthesized and their surface chemical properties were examined with the aim to have highly functional and highly water-soluble fluorinated surfactants when compared with the conventional fluorinated surfactants. Comparisons of the surface chemical properties of the synthesized gemini-type hybrid surfactants with those of monounit-type hybrid surfactants, F(CF₂)_m(CH₂)₂CH(OSO₃Na)(CH₂)_nH [FmEHnOS, m = 4, 6; n = 3, 5)], revealed that gemination causes a remarkable lowering (about 1/100) in cmc value while it produces little changes in Krafft point (below 0 °C) and surface tension at cmc (γ_cmc).     

Glycosylidene Carbenes. Part 6. Synthesis of alkyl and fluoroalkyl glycosides

The syntheses of glycosides from the diazirine 1 and a range of alcohols under thermal and/or photolytic conditions are described. Yields and diastereoselectivities depend upon the pK_HA values of the alcohols, the solvent, and the reaction temperature. The glycosidation of weakly acidic alcohols (MeOH, EtOH, i-PrOH, and t-BuOH, 1 equiv. each) in CH₂Cl₂ at room temperature leads to the glycosides 2–5 in yields between 60 and 34% (Scheme 1 and Table 1). At ?70 to ?60°, yields are markedly higher. In CH₂Cl₂, diastereoselectivities are very low. In THF, at ?70 to ?60°, however, glycosidation of i-PrOH leads to α-D -/β-D - 4 in a ratio of 8:92. More strongly acidic alcohols, such as CF₃CH₂OH, (CF₃)₂ CHOH, and (CF₃)₂C(Me)OH, and the highly fluorinated long-chain alcohols CF₃(CF₂)₅(CH₂)₂OH ( 11 ) and CHF₂(CF₂)₉CH₂OH ( 13 ) react (CH₂Cl₂, r.t.) in yields between 73 and 85% and lead mainly to the β-D -glucosides β-D - 6 to β-D - 8 , β-D - 12 , and β-D - 14 (d.e. 14–68%). Yields and diastereoselectivities are markedly improved, when toluene, dioxane, 1,2-dimetoxyethane, or THF are used, as examined for the glycosidation of (CF₃)₂C(Me)OH, yielding (1,2-dimethoxyethane, 25°) 80% of α-D -/ β-D - 8 in a ratio of 2:98 (d.e. 96%; Table 4). In EtCN, (CF₃)₂C(Me)OH yields up to 55% of the imidate 10 . Glycosidation of di-O-isopropylideneglucose 15 leads to 16 (CH₂Cl₂, r.t.; 65%, α-D / β-D = 33:67). That glycosidation occurs by initial protonation of the intermediate glycosylidene carbene is evidenced, for strongly acidic alcohols, by the formation of 10 , derived from the attack of (CF₃)₂MeCO^? on an intermediate nitrilium ion (Scheme 4), and for weakly acidic alcohols, by the formation of α-D - 9 and β-D - 9 , derived by attack of i-PrO^? on intermediate tetrahydrofuranylium ions. A working hypothesis is presented (Scheme 3). The diastereoselectivities are rationalized on the basis of a protonation in the σ plane of the intermediate carbene, the stabilization of the thereby generated ion pair by interaction with the BnO? C(2) group, with the solvent, and/or with the alcohol, and the final nucleophilic attack by RO^? in the π plane of the (solvated) oxonium ion.     

Synthesis,properties and crystal structures of volatile dimethylgold(III) complexes based on phenyl-containing β-diketones and β-iminoketone

We have synthesized and studied volatile dimethylgold(III) complexes based on phenyl-containing β-diketones and β-iminoketone, namely (CH₃)₂Au(C₆H₅–CO–CH–CO–CH₃), (CH₃)₂Au(bac) (1); (CH₃)₂Au(C₆H₅–CO–CH–CO–CF₃), (CH₃)₂Au(btfa) (2); and (CH₃)₂Au(C₆H₅–CO–CH–C(NH)–CH₃), (CH₃)₂Au(i-bac) (3). The obtained compounds were identified by elemental analysis, ¹H NMR and IR-spectroscopy, and were characterized by DTA and single-crystal X-ray diffraction studies. In compounds 2 and 3, the Au atom has a square coordination environment AuC₂O₂ and AuC₂NO, respectively.     

Hydrogen bonding and proton transfer involving the trihydride complexes Cp*M(dppe)H3 (M = Mo,W) and fluorinated alcohols: the competitive role of the hydride ligands and metal

The protonation of complexes Cp*M(dppe)H₃ (dppe is ethylenebis(diphenylphosphine), M = Mo (1), W (2)) by a variety of fluorinated alcohols of different acid strength (FCH₂CH₂OH, CF₃CH₂OH, (CF₃)₂CHOH, and (CF₃)₃COH) was investigated experimentally by the variable temperature spectroscopic methods (IR, NMR) and stopped-flow technique (UV-Vis). The structures of the hydrogen-bonded and proton transfer products were studied by DFT calculations. In agreement with the calculation results, the IR data suggest that the initial hydrogen bond is established with a hydride site for complex 1 and with the metal site for complex 2. However, no intermediate dihydrogen complex found theoretically was detected experimentally on the way to the final classical tetrahydride product.