Design of highly active heterogeneous palladium catalysts for the activation of aryl chlorides in Heck reactions

In situ generation of highly active palladium species by intermediate dissolution of Pd from solid supported catalysts has been demonstrated to be a very successful approach for the activation of aryl chlorides in Heck reactions. The new ‘heterogeneous’ Pd catalysts act as reservoir for molecular Pd species with unsaturated coordination sphere in solution. Crucial Pd leaching and re-deposition onto the support can be controlled by optimization of reaction conditions and by the properties of the catalysts. Pd is re-deposited onto the support at the end of the reaction. The catalysts, palladium supported on activated carbon, on various metal oxides or fluorides and Pd complexes in zeolites, are easy to prepare, though the preparation conditions are crucial. The catalysts convert all aryl bromides completely within minutes (TON 100,000). Aryl chlorides (even deactivated ones) are converted with high yields, within 2-6 h. The catalysts belong to the most active ones in Heck reactions at all (including best homogeneous systems) and fulfill all relevant requirements for practical applications in laboratory and industry.     

Sterically bulky thioureas as air- and moisture-stable ligands for pd-catalyzed Heck reactions of aryl halides

We demonstrate that sterically bulky N,N'-disubstituted cyclic thiourea-Pd(0) complexes are air- and moisture-stable and highly active catalysts for palladium-catalyzed Heck reaction of aryl iodides and bromides with olefins (TONs up to 500000 for the reaction of PhI and methyl acrylate). Even activated aryl chlorides can undergo complete conversion in Bu(4)NBr in the presence of 1 mol % Pd catalyst.     

Rationally designed pincer-type heck catalysts bearing aminophosphine substituents: Pd IV intermediates and palladium nanoparticles

The aminophosphine-based pincer complexes [C6H3-2,6-(XP(piperidinyl)2)2Pd(Cl)] (X=NH 1; X=O 2) are readily prepared from cheap starting materials by sequential addition of 1,1',1'-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(Cl)2] (cod=cyclooctadiene) in toluene under N2 in "one pot". Compounds 1 and 2 proved to be excellent Heck catalysts and allow the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins as coupling partners at 140 degrees C within very short reaction times and low catalyst loadings. Increased reaction temperatures also enable the efficient coupling of olefins with electronically deactivated and sterically hindered aryl chlorides in the presence of only 0.01 mol % of catalyst. The mechanistic studies performed rule out that homogeneous Pd 0 complexes are the catalytically active forms of 1 and 2. On the other hand, the involvement of palladium nanoparticles in the catalytic cycle received strong experimental support. Even though pincer-type Pd IV intermediates derived from 1 (and 2) are not involved in the catalytic cycle of the Heck reaction, their general existence as reactive intermediates (for example, in other reactions) cannot be excluded. On the contrary, they were shown to be thermally accessible. Compounds 1 and 2 show a smooth halide exchange with bromobenzene to yield their bromo derivatives in DMF at 100 degrees C. Experimental observations revealed that the halide exchange most probably proceeded via pincer-type Pd IV intermediates. DFT calculations support this hypothesis and indicated that aminophosphine-based pincer-type Pd IV intermediates are generally to be considered as reactive intermediates in reactions with aryl halides performed at elevated temperatures.     

Palladium nanoparticles as efficient green homogeneous and heterogeneous carbon-carbon coupling precatalysts: a unifying view

Pd catalysis of C-C bond formations is briefly reviewed from the angle of nanoparticles (NPs) whether they are homogeneous or heterogeneous precatalysts and whether they are intentionally preformed or generated from a Pd derivative such as Pd(OAc)2. The most studied reaction is the Heck coupling of halogenoarenes with olefins that usually proceeds at high temperature (120-160 degrees C). Under such conditions, the PdII precursor is reduced to Pd0, forming PdNPs from which Pd atom leaching, subsequent to oxidative addition of the aryl halide onto the PdNP surface, is the source of very active molecular catalysts. Other C-C coupling reactions (Suzuki, Sonogashira, Stille, Negishi, Hiyama, Corriu-Kumada, Ullmann, and Tsuji-Trost) can also be catalyzed by species produced from preformed PdNPs. For catalysis of these reactions, leaching of active Pd atoms from the PdNPs may also provide a viable molecular mechanistic scheme. Thus, the term "PdNP catalysis of C-C coupling" used in this review refers to this function of PdNPs as precursors of catalytically active Pd species (i.e., the PdNPs are precatalysts of C-C coupling reactions).     

Layered double hydroxide supported nanopalladium catalyst for Heck-, Suzuki-, Sonogashira-, and Stille-type coupling reactions of chloroarenes

Layered double hydroxide and Merrifield resin supported nanopalladium(0) catalysts are prepared by an exchange of PdCl(4)(2-) followed by reduction and well characterized for the first time. The ligand-free heterogeneous layered double hydroxide supported nanopalladium (LDH-Pd(0)) catalyst using the basic LDH in place of basic ligands indeed exhibits higher activity and selectivity in the Heck olefination of electron-poor and electron-rich chloroarenes in nonaqueous ionic liquids (NAIL) over the homogeneous PdCl(2) system. Using microwave irradiation, the rate of the Heck olefination reaction is accelerated, manifold with the highest turnover frequency ever recorded in the case of both electron-poor and electron-rich chloroarenes. The basic LDH-Pd(0) shows a superior activity over a range of supported catalysts, from acidic to weakly basic Pd/C, Pd/SiO(2,) Pd/Al(2)O(3), and resin-PdCl(4)(2-) in the Heck olefination of deactivated electron-rich 4-chloroanisole. The use of LDH-Pd(0) is extended to the Suzuki-, Sonogashira-, and Stille-type coupling reactions of chloroarenes in an effort to understand the scope and utility of the reaction. The catalyst is quantitatively recovered from the reaction by a simple filtration and reused for a number of cycles with almost consistent activity in all the coupling reactions. The heterogeneity studies provide an insight into mechanistic aspects of the Heck olefination reaction and evidence that the reaction proceeds on the surface of the nanopalladium particles of the heterogeneous catalyst. TEM images of the fresh and used catalyst indeed show that the nanostructured palladium supported on LDH remains unchanged at the end of the reaction, while the XPS and evolved gas detection by TGA-MS of the used catalyst identify ArPdX species on the heterogeneous surface. Thus, the ligand-free nanopalladium supported on LDH, synthesized by the simple protocol, displays superior activity over the other heterogeneous catalysts inclusive of nanopalladium in the C-C coupling reactions of chloroarenes.     

A unifying mechanism for all high-temperature Heck reactions. The role of palladium colloids and anionic species

The Heck reaction has been the subject of intense investigation in the past decade. Many new types of catalysts have been developed in addition to the existing palladium/phosphine complexes. Prominent among these are palladacycles, pincers, several types of heterogeneous palladium catalysts, colloids and ligand-free palladium, usually in the form of Pd(OAc)2. Most of the newer types function only at higher temperatures, typically between 120 and 160 degrees C. It has been shown that irrespective of the catalyst precursor, none of these catalysts are stable at these high temperatures. They all have a tendency to form soluble palladium(0) colloids or nanoparticles, certainly with less reactive substrates such as aryl bromides or chlorides. The Heck reaction takes place by attack of the arylating agent on the palladium atoms in the outer rim of the nanoparticles. This leads to formation of monomeric or dimeric anionic palladium complexes that undergo the usual steps of the Heck mechanism as described by Amatore and Jutand.     

胺基化树脂负载Pd(0)对Heck反应催化性能的研究

将氯球用胺化剂、乙二胺、胍进行胺化后负载氯化钯, 在乙醇溶液中用硼氢化钾还原, 制备了含胺功能基树脂负载钯(0)的催化剂; 研究了催化剂对含各种取代基碘代苯与丙烯酸的Heck芳基化反应催化性能. 结果表明, 该类催化剂具有良好的催化活性和重复使用性能, 其中用乙二胺功能化树脂负载的Pd(0)催化剂在90 ℃重复使用17次时能保持良好的催化活性. 催化剂反应前后的SEM形貌图和过滤液的活性试验表明催化剂活性组分Pd(0)在反应中有沥取(leaching)现象.     

Heterogeneous Versus Homogeneous Palladium Catalysts for Ligandless Mizoroki–Heck Reactions: A Comparison of Batch/Microwave and Continuous‐Flow Processing

Mizoroki–Heck couplings of aryl iodides and bromides with butyl acrylate were investigated as model systems to perform transition‐metal‐catalyzed transformations in continuous‐flow mode. As a suitable ligandless catalyst system for the Mizoroki–Heck couplings both heterogeneous and homogeneous Pd catalysts (Pd/C and Pd acetate) were considered. In batch mode, full conversion with excellent selectivity for coupling was achieved applying high‐temperature microwave conditions with Pd levels as low as 10^?3 mol %. In continuous‐flow mode with Pd/C as a catalyst, significant Pd leaching from the heterogeneous catalyst was observed as these Mizoroki–Heck couplings proceed by a homogeneous mechanism involving soluble Pd colloids/nanoparticles. By applying low levels of Pd acetate as homogeneous Pd precatalyst, successful continuous‐flow Mizoroki–Heck transformations were performed in a high‐temperature/pressure flow reactor. For both aryl iodides and bromides, high isolated product yields of the cinnamic esters were obtained. Mechanistic issues involving the Pd‐catalyzed Mizoroki–Heck reactions are discussed.     

Investigation of Pd leaching from supported Pd catalysts during the Heck reaction

Palladium supported on amorphous silica, mercapto-functionalized silica, amine functionalized silica, and zeolite Y has been studied as a catalyst in the Heck reaction of iodobenzene with butyl acrylate in the presence of triethylamine base and dimethylformamide solvent. Trapping of soluble Pd with poly(4-vinylpyridine), hot filtration tests during the batchwise Heck reaction, and reaction tests of effluents from a fixed bed continuous reactor support the conclusion that leached Pd is the active phase in the Heck reaction for all of the catalysts tested. Two different paths of Pd leaching that depend on the chemical state of the Pd were elucidated in this study. Oxidative addition of aryl halide to reduced Pd caused leaching of samples containing metallic particles. However, for a zeolite Y sample containing unreduced cationic Pd, the presence of triethylamine base was required to leach Pd into solution. These two paths of Pd leaching are consistent with the generally accepted mechanism of the Heck reaction.     

Homeopathic ligand-free palladium as a catalyst in the heck reaction. A comparison with a palladacycle

[reaction: see text] Ligand-free Pd(OAc)(2) can be used as a catalyst in the Heck reaction of aryl bromides as long as the amount of catalyst is kept between 0.01 and 0.1 mol %. At higher concentrations palladium black forms and the reaction stops. The actual catalyst is monomeric. Palladacycles merely serve as a source of ligand-free palladium in Heck reactions of aryl bromides.     

An efficient and general method for the Heck and Buchwald-Hartwig coupling reactions of aryl chlorides

The β-diketiminatophosphane Pd complex acted as a powerful catalyst for the Heck coupling of aryl chlorides with alkenes. Various aryl and heteroaryl chlorides were coupled efficiently under relatively mild conditions. Furthermore, this catalytic system also proved to be highly active in the Buchwald-Hartwig coupling of deactivated and sterically hindered aryl chlorides at room temperature.     

Kinetics of the Heck reactions of styrene with bromobenzene and iodobenzene in the presence of ligandless catalytic systems: A comparative study

The comparative kinetic study of the Heck reactions of styrene with iodobenzene and bromobenzene has revealed specific features of these reactions that should necessarily be taken into account for the observed data to be interpretable in the framework of a unified mechanistic conception. It has been proved for the styrene-bromobenzene reaction that benzene forms as a by-product via a heterogeneous route and catalytically active Pd(0) undergoes aggregation via an autocatalytic mechanism. The kinetics of the styrene-iodobenzene reaction indicates that benzene in this reaction forms via a homogeneous route, biphenyl forms as another by-product by a bimolecular mechanism, and excessive aryl halide concentration reduces the catalyst formation rate. A nonlinear-law mechanism is suggested for the conjugation of palladium reduction, aggregation, and oxidation in the Heck reaction. This mechanism allows the existence of a “critical” Pd(0) concentration and a “critical” formation rate of this catalytic species above which the catalytic activity begins to decrease.     

A versatile catalyst for Heck reactions of aryl chlorides and aryl bromides under mild conditions.

In the presence of Cy2NMe, Pd/P(t-Bu)3 serves as an exceptionally mild and versatile catalyst for Heck reactions of aryl chlorides and bromides. A sterically and electronically diverse array of aryl bromides, as well as activated aryl chlorides, couple with a range of mono- and disubstituted olefins at room temperature, furnishing the arylated product with high E/Z stereoselection. The corresponding reactions of a broad spectrum of electron-neutral and electron-rich aryl chlorides proceed at elevated temperature, also with high selectivity. In terms of scope and mildness, Pd/P(t-Bu)3/Cy2NMe represents an advance over previously reported catalysts for these Heck coupling processes.     

First palladium-catalyzed Heck reactions with efficient colloidal catalyst systems

For the first time it has been shown that palladium colloids are effective and active catalysts for the olefination of aryl bromides (Heck reaction). Worthy of note are the high activities of the catalyst system for activated aryl bromides under optimized reaction conditions, which are better than or comparable with “classical” palladium phosphine complexes. Addition of phosphines strongly retards the reaction rate of the colloid catalyst. Nevertheless, this type of catalyst is not suitable for the activation of non-activated substrates, especially technically interesting aryl chlorides.     

无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用

 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86％, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.     

Highly active palladium/activated carbon catalysts for Heck reactions: correlation of activity, catalyst properties, and Pd leaching

A variety of palladium on activated carbon catalysts differing in Pd dispersion, Pd distribution, Pd oxidation state, and water content were tested in Heck reactions of aryl bromides with olefins. The optimization of the catalyst (structure-activity relationship) and reaction conditions (temperature, solvent, base, and Pd loading) allowed Pd/C catalysts with very high activity for Heck reactions of unactivated bromobenzene (turnover number (TON) approximately 18000, turnover frequency (TOF) up to 9000, Pd concentrations down to 0.005 mol %) to be developed. High Pd dispersion, low degree of reduction, sufficient content of water, and uniform Pd impregnation are criteria for the most active system. The catalysts combine high activity and selectivity under ambient conditions (air and moisture), easy separation (filtration), and quantitative recovery of palladium. Determination of Pd in solution after and during the reaction, and catalyst characterization before and after the reaction (transmission electron microscopy (TEM), X-ray diffraction (XRD)), indicate dissolution/reprecipitation of palladium during the reaction. The Pd concentration in solution is highest at the beginning of the reaction and is a minimum (< 1 ppm) at the end of the reaction. Palladium leaching correlates significantly with the reaction parameters.     

Guanidine‐Functionalized Resin‐Supported Pd(0) Catalyst: Activity,Reusability, and Redeposition of Active Pd Species in Heck Vinylation

The guanidine‐functionalized resin‐supported Pd(0) catalyst [GDR·Pd(0)] is highly active in Heck reaction of aryl bromides with acrylic acid or styrene without the need to exclude air. The catalyst can be recycled at least 9 times without significant loss of activity in N‐methyl‐2‐pyrrolidone at 140 °C. The Heck reaction proceeds homogeneously with dissolved palladium species and the dissolved active palladium species can redeposit onto the surface of catalyst in the reaction. The XRD peak shifting of Pd phases in the catalyst provides the evidence for the re‐deposition of the active palladium species.     

Cascade alkenyl amination/Heck reaction promoted by a bifunctional palladium catalyst: a novel one-pot synthesis of indoles from o-haloanilines and alkenyl halides

A novel approach for the synthesis of the important indole ring is described. Indoles are obtained from o-bromoanilines and alkenyl halides in a Pd-catalyzed cascade process that involves an alkenyl amination followed by an intramolecular Heck reaction. The overall process represents the first example of the participation of alkenyl amination reactions in Pd-catalyzed cascade reactions. Initially, the relative reactivity of aryl and alkenyl bromides and chlorides towards Pd-catalyzed amination was investigated. Competition experiments were carried out in the presence of primary and secondary amines, and these revealed the reactivity order alkenyl bromides > aryl bromides > alkenyl chlorides > aryl chlorides, as well as very high chemoselectivity; the more reactive halide was always favored. Thereafter, optimized reaction conditions for the sequential alkenyl amination/Heck cyclization to give indoles were investigated with the model reaction of o-bromoaniline with alpha-bromostyrene. An extensive screening of ligands, bases, and reaction conditions revealed that the [Pd2(dba)3]/DavePhos, NaOtBu, toluene combination at 100 degrees C were the optimized reaction conditions to carry out the cascade process (dba=dibenzylideneacetone, DavePhos=2-dicyclohexylphosphino-2'-N,N-dimethylaminobiphenyl). The reaction proceeds with aryl, alkyl, and functionalized substitutents in both starting reactants. The cyclization was also studied with N-substituted o-bromoanilines (which would give rise to N-substituted indoles); however, in this case, indole formation occurred only with 1-substituted-2-bromoalkenes. Finally, the application of this methodology to o-chloroanilines required further optimization. Although the catalyst based on DavePhos failed to promote the cascade process, a catalytic combination based on [Pd2(dba)3]/X-Phos promoted the formation of the indole ring also from the less reactive chloroanilines.     

Synthesis of aryl substituted quinones as β-secretase inhibitors: Ligand-free direct arylation of quinones with aryl halides

The simple ligand-free direct arylation of quinones with aryl halides applying Pd(OAc)₂ as a catalyst in accordance with Heck reaction was studied. This reaction provided a simple and efficient synthetic approach to efficient inhibitors of β-secretase aryl-substituted quinones.     

Heck reaction catalyzed by PD-modified zeolites.

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (< or =0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.