Synthesis of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols via peptization at room temperature

A procedure is developed for the synthesis of concentrated CeO₂-ZrO₂ hydrosols based on the peptization of a precipitate obtained by the hydrolysis of a cerium nitrate-zirconium oxynitrate mixture. The time intervals and optimum [H⁺]/[Me ⁿ⁺] molar ratios giving rise the formation of CeO₂-ZrO₂ hydrosols stable to aggregation with a narrow particle size distribution are established. The size, shape, density, and phase composition of the hydrosol particles are determined.     

Colloidal properties of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols

CeO₂-ZrO₂ hydrosols are synthesized and the size, shape, phase composition, density, and electrophoretic mobility of particles are studied. The pH ranges of the stability of hydrosols and the thresholds of their fast coagulation in the presence of some electrolytes are determined. The nature of the aggregation stability of CeO₂-ZrO₂ hydrosols is discussed.     

Effect of the microstructure of the supported catalysts CuO/TiO<Subscript>2</Subscript> and CuO/(CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>) on their catalytic properties in carbon monoxide oxidation

The effect of the microstructure of titanium dioxide on the structure, thermal stability, and catalytic properties of supported CuO/TiO₂ and CuO/(CeO₂-TiO₂) catalysts in CO oxidation was studied. The formation of a nanocrystalline structure was found in the CuO/TiO₂ catalysts calcined at 500°C. This nanocrystalline structure consisted of aggregated fine anatase particles about 10 nm in size and interblock boundaries between them, in which Cu²⁺ ions were stabilized. Heat treatment of this catalyst at 700°C led to a change in its microstructure with the formation of fine CuO particles 2.5–3 nm in size, which were strongly bound to the surface of TiO₂ (anatase) with a regular well-ordered crystal structure. In the CuO/(CeO₂-TiO₂) catalysts, the nanocrystalline structure of anatase was thermally more stable than in the CuO/TiO₂ catalyst, and it persisted up to 700°C. The study of the catalytic properties of the resulting catalysts showed that the CuO/(CeO₂-TiO₂) catalysts with the nanocrystalline structure of anatase were characterized by the high-est activity in CO oxidation to CO₂.     

Temperature-programmed reduction of lightly yttrium-doped Au/CeO<Subscript>2</Subscript> catalysts

The reducibility of Au catalysts on CeO₂ supports doped with 1 and 2.5 mass% Y₂O₃ by two types of preparation methods (impregnation and co-precipitation) has been studied by temperature-programmed reduction and compared with that of pure Au/CeO₂. The kinetic parameters of reduction were determined simulating each reduction process. The capacities of these catalysts to retain oxygen have been evaluated by temperature-programmed desorption. The catalytic activities in water gas shift reaction were determined measuring CO conversion between 413 and 623 K. The catalytic performances of all these catalysts were explained in terms of mobility of the oxygen ions of the CeO₂ lattice.     

Selective oxidation of carbon monoxide in hydrogen-containing gas on CuO-CeO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts prepared by surface self-propagating thermal synthesis

The CuO-CeO₂/Al₂O₃ catalysts for the selective oxidation of CO in hydrogen-containing mixtures were prepared by surface self-propagating thermal synthesis (SSTS) with the use of cerium nitrate Ce(NO₃)₃, the ammonia complex of copper acetate [Cu(NH₃)₄](CH₃COO)₂, and citric acid C₆H₈O₇ as a fuel additive. The effect of the C₆H₈O₇/Ce(NO₃)₃ molar ratio on the catalyst activity and selectivity for oxygen was studied. The catalyst samples were studied by X-ray diffraction (XRD) analysis, temperature-programmed reduction (TPR-H₂), IR spectroscopy of adsorbed CO, and transmission electron microscopy (TEM). It was found that an increase in the C₆H₈O₇/Ce(NO₃)₃ ratio resulted in an increase in the degree of dispersion of the resulting CeO₂ phase. The greatest amount of dispersed CuO particles, which are responsible for catalytic activity in the oxidation of CO, was formed at C₆H₈O₇/Ce(NO₃)₃ = 1.     

Structure and surface properties of ZrO<Subscript>2</Subscript>, CeO<Subscript>2</Subscript>, and Zr<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> prepared by a microemulsion method according to X-ray diffraction,TPR, and EPR data

It was established by X-ray diffraction, TPR, and EPR that microemulsion (m.e.) synthesis yields the binary oxides ZrO₂(m.e.) and CeO₂(m.e.) and the mixed oxide Zr_0.5Ce_0.5O₂(m.e.) in the form of a tetragonal, cubic, and pseudocubic phase, respectively, having crystallite sizes of 5–6 nm. The bond energy of surface oxygen in the (m.e.) samples is lower than in their analogues prepared by pyrolysis. Hydrogen oxidation on the oxides under study occurs at higher temperatures than CO oxidation. ZrO₂(m.e.) and CeO₂(m.e.) are active in O₂⁻ formation during NO + O₂ adsorption, while CeO₂ is active during CO + O₂ adsorption, too. However, its amount here is one-half to one-third its amount in the pyrolysis-prepared samples, signifying a reduced number of active sites, which are Zr⁴⁺ and Ce⁴⁺ coordinatively unsaturated cations and Me⁴⁺-O²⁻ pairs. O₂⁻ radical anions are stabilized in the coordination sphere of Zr⁴⁺ coordinatively unsaturated cations via ionic bonding, and in the sphere of Ce⁴⁺ cations, via covalent bonding. Ionic bonds are stronger than ionic-covalent bonds and do not depend on the ZrO₂ phase composition. Zr_0.5Ce_0.5O₂ is inactive in these reactions because of the strong interaction of Zr and Ce cations. It is suggested that Ce^{(4 + β)+} coordinatively unsaturated cations exist on its surface, and their acid strength is lower than that of Zr⁴⁺ and Ce⁴⁺ cations in ZrO₂ and CeO₂, according to the order ZrO₂ > CeO₂ ≥ Zr_0.5Ce_0.5O₂. Neither TPR nor adsorption of probe molecules revealed Zr cations on the surface of the mixed oxide.     

Effect of cerium dioxide on the properties of monolithic CuO-ZnO-CeO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts in methanol decomposition

Cerium dioxide as a component of CuO-ZnO-CeO₂/Al₂O₃/cordierite catalysts stabilizes their action in the decomposition of methanol by preventing carbon deposition on the surface and facilitating hydrogen formation with selectivity and yield in the range 85–96%. The optimal indices for this reaction are obtained for a CeO₂-CuO/Al₂O₃/cordierite sample prepared using an ammonium precursor for cerium, (NH₄)₂Ce(NO₃)₆. This catalyst displays enhanced reductive capacity relative to the analogous CeO₂-CuO composition prepared using Ce(NO₃)₃·6H₂O.     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.     

Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.     

Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

Thermal stability and surface structure of Mo/CeO<Subscript>2</Subscript> and Ce-doped Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

In order to explore the influence of CeO₂ on the structure and surface characteristics of molybdena, an investigation was undertaken by using N₂ adsorption (BET method), thermal analysis and in-situ diffuse reflectance infrared (DRIFT) techniques. In this work, the Mo/CeO₂ and Ce-Mo/Al₂O₃ samples were prepared by impregnation and co-precipitation methods with high Mo loadings. Combining the results one may notice that the presence of ceria led to the increase of polymerized surface Mo species so as to forming Mo-O-Ce linkages besides the formation of coupled O=Mo=O bonds indicative of polymeric MoO₃. From thermal analysis, it can be inferred that Mo/Al₂O₃ is the thermally most stable material in the temperature range used in the experiment (up to 900°C), whereas Ce-Mo/Al₂O₃ and Mo/CeO₂ samples undergo morphological modifications above 700°C resulting in lattice defects, which motivate the mobility of Mo and Ce ions and thus enhance the possibility of interaction between them. Additionally, their activity towards CO adsorption needs reduced ceria and molybdena containing coordinatively unsaturated sites (CUS), oxygen vacancies and hydroxyl groups to form various carbonate species.     

Au/M-TiO<Subscript>2</Subscript> nanotube catalysts (M=Ce,Ga, Co,Y): preparation,characterization and their catalytic activity for CO oxidation

The M-modified TiO₂ nanotubes (NTs) (M?=?Ce, Ga, Co, Y, 2.0 wt%) were synthesized by combining sol-gel method with hydrothermal treatment, based on which gold was loaded by the deposition–precipitation approach. These catalysts were loaded with 1.5 wt% gold and calcined at 300?°C, and their catalytic performance was compared with Au/TiO₂ NTs in CO oxidation. TEM results manifested Au/M-TiO₂ NTs (M?=?Ce, Ga, Co, Y) had smaller gold nanoparticles than Au/TiO₂ NTs. Patterns of XPS revealed the presence of the strong interaction between gold and support in Au/M-TiO₂ NTs (M?=?Ce, Ga, Co, Y). Ce⁴⁺, Ga³⁺, Co²⁺, and Y³⁺ ions were present as CeO₂, Ga₂O₃, CoO, and Y₂O₃ in Au/M-TiO₂ NTs (M?=?Ce, Ga, Co, Y), respectively. Based on O₂-TPD studies, Au/M-TiO₂ NTs (M?=?Ce, Ga, Co, Y) provided new O₂ adsorption sites for the adsorption and activation of oxygen in CO oxidation. M (M?=?Ce, Ga, Co, Y) modifying performed the positive effect on CO oxidation activity and Au/Y-TiO₂ NTs showed the highest activity among these catalysts. Additionally, Au/Y-TiO₂ NTs also performed excellent high-temperature stability. It was likely that the strong interaction between gold and support created the small size of gold nanoparticles, large O₂ adsorption and plenty of defects, thereby enhancing the catalytic activity of Au/M-TiO₂ NTs (M?=?Ce, Ga, Co, Y).

Open image in new window

     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Fabrication of Cu-Doped CeO<Subscript>2</Subscript> Catalysts with Different Dimension Pore Structures for CO Catalytic Oxidation

Transition metal oxides (TMOs) applied as catalysts whose catalytic activities are directly affected by their pores size and pores distributions. Herein, two-dimensional Cu-doped CeO₂ (2D@Cu–CeO₂) and three-dimensional Cu-doped CeO₂ (3D@Cu–CeO₂) were prepared by adopting the mesoporous silica SBA-15 and KIT-6 as templates, respectively. Nanometer Cu-doped CeO₂ (nano@Cu–CeO₂) was synthesized by the method of precipitation. All catalysts were evaluated for the catalytic oxidation of CO, and the 3D@Cu–CeO₂ catalyst exhibited the highest catalytic activity (complete conversion temperature T₁₀₀?=?50?°C), which can be ascribed to the three-dimensional porous channel structure, larger specific surface area and abundant active surface oxygen species. In addition, complete conversion of CO had remained the same after 3D@Cu–CeO₂ was observed for 12 h, indicating it has the best catalytic stability for CO.     

Dehydrogenation of Ethylbenzene to Styrene with Carbon Dioxide Over ZrO<Subscript>2</Subscript>-based Composite Oxide Catalysts

We have been exploring various new catalyst systems for the utilization of carbon dioxide as a soft oxidant in the catalytic dehydrogenation of ethylbenzene (EB) to styrene. The utilization of CO₂ as a soft oxidant for the commercially important catalytic dehydrogenation of EB to styrene has received enormous attention recently due to its several attractive features. This review summarizes the results of our most recent findings on zirconia-based composite oxide catalyst systems exploited for this reaction. Under this systematic and comprehensive investigation various zirconia-based composite oxide catalysts namely, TiO₂-ZrO₂, MnO₂-ZrO₂, CeO₂-ZrO₂, K₂O/TiO₂-ZrO₂, B₂O₃/TiO₂-ZrO₂ and CeO₂-ZrO₂/SBA-15 have been synthesized, characterized by various techniques and evaluated for the title reaction. Most of these composite oxide catalysts were found to exhibit very interesting physicochemical characteristics and exceptionally better catalytic properties for this reaction. As revealed by characterization results, a large number of acid–base sites with moderate strength are essential for a high conversion and product selectivity of this reaction with CO₂ as the soft oxidant.     

Methanol conversion over CuO supported on CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript>: An in situ IR spectroscopic study

The main reactions yielding hydrogen are the recombination of hydrogen atoms on copper clusters and methyl formate decomposition. Methyl formate results from the interaction between the linear methoxy group and the formate complex located on CuO. The source of CO₂ appearing in the gas phase is the formate complex, and the source of CO is methyl formate. The rates of methoxy group conversion and product formation over supports (ZrO₂, CeO₂, Ce_0.8Zr_0.2O₂) and copper-containing catalysts (5%Cu/CeO₂, 5%Cu/ZrO₂, 2%Cu/Ce_0.8Zr_0.2O₂, 2%Cu/Ce_0.1Y_0.1Zr_0.8) are compared. The dominant process in methoxy group conversion over the supports and copper-containing catalysts is methanol decomposition to H₂ and CO and to H₂ and CO₂, respectively. The methoxy group conversion rate is proportional to the H₂ and CO₂ formation rate and is determined by the concentration of supported copper.     

制备方法对CuO/CeO_2-ZrO_2催化CO低温氧化活性的影响

采用微波加热分解法(一步法)和微波加热处理共沉淀+浸渍法(两步法)制备了CuO/CeO2-ZrO2催化剂,并对其进行了X射线衍射、低温氮气吸附/脱附和程序升温还原等表征,采用色谱流动法考察了催化剂的催化CO低温氧化性能.结果表明,一步法比两步法更有利于使催化剂表面CuO高度分散,CuO与CeO2-ZrO2间的相互作用更强,CuO更容易被还原,从而具有更高的催化CO氧化活性.与CeO2-ZrO2有相互作用的高分散和小颗粒CuO有利于催化剂活性的提高,与CeO2-ZrO2无相互作用的大颗粒CuO对催化剂的活性有抑制作用.     

The effect of spinel type support FeAlO<Subscript>3</Subscript>, ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>, CrAl<Subscript>3</Subscript>O<Subscript>6</Subscript> on physicochemical properties of Cu,Ag, Au,Ru supported catalysts for methanol synthesis

The comparative study of the role of binary oxide support on catalyst physico-chemical properties and performance in methanol synthesis were undertaken and the spinel like type structures (ZnAl₂O₄, FeAlO₃, CrAl₃O₆) were prepared and used as the supports for 5% metal (Cu, Ag, Au, Ru) dispersed catalysts. The monometallic 5% Cu/support and bimetallic 1% Au (or 1% Ru)-5% Cu/support (Al₂O₃, ZnAl₂O₄, FeAlO₃, CrAl₃O₆) catalysts were investigated by BET, XRD and TPR methods. Activity tests in methanol synthesis of CO and CO₂ mixture hydrogenation were carried out. The order of Cu/support catalysts activity in methanol synthesis: CrAl₃O{ia6} > FeAlO₃ > ZnAl₂O₄ is conditioned by their reducibility in hydrogen at low temperature. Gold appeared more efficient than ruthenium in promotion of Cu/support catalysts. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 2, pp. 242–248. The article is published in the original.     

Selective oxidation of CO in the presence of hydrogen on CuO/CeO<Subscript>2</Subscript> catalysts modified with Fe and Ni oxides

The selective oxidation of CO in the presence of hydrogen on CuO/CeO₂ systems containing Fe and Ni oxides as promoters was studied. The catalysts containing 1–5 wt % CuO and 1–2.5 wt % Fe₂O₃ supported on CeO₂ and the CuO/CeO₂ systems containing 1–2.5 wt % NiO were synthesized, and their catalytic activity as a function of temperature was determined. It was found that the additives of Fe and Ni oxides increased the activity of the CuO/CeO₂ catalysts with a low concentration of CuO. In this case, the conversion of CO at 150°C approached 100%. At the same time, these additives had no effect on the activity of the CuO/CeO₂ systems at a CuO concentration of 5 wt % or higher, which exhibited an initially high activity in the above temperature region. The forms of CO adsorption and the amounts of active sites for CO adsorption and oxidation were studied using temperature-programmed desorption. It was found that the introduction of Fe and Ni additives in a certain preparation procedure facilitated the formation of an additional amount of active centers associated with CuO. Data on the temperature-programmed reduction of samples (the amount of absorbed hydrogen and the maximum temperature of hydrogen absorption) suggested the interaction of all catalyst components, and the magnitude of this interaction depended on the sample preparation procedure. With the use of Mössbauer spectroscopy, it was found that the procedure of iron oxide introduction into the CuO/CeO₂ system was responsible for the electron-ion interactions of catalyst components and the reaction mixture.     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.