Preparation and characterization of SiO2/ZrO2/Ag multicoated microspheres

A new type of multicoated silica/zirconia/silver (SiO₂/ZrO₂/Ag) core-shell composite microspheres is synthesized in this paper. In the process, ZrO₂-decorated silica (SiO₂/ZrO₂) core-shell composites were firstly fabricated by the modification of zirconia on silica microspheres through the hydrolysis of zirconium precursor. Subsequently, on SiO₂/ZrO₂ composite cores, silver nanoparticles were introduced via ultrasonic irradiation and acted as “Ag seeds” for the formation of integrate silver shell by further reduction of silver ions using formaldehyde as reducer. The resulting samples were characterized by transmission electron microscopy, X-ray diffraction, Fourier-transform infrared, energy-dispersive X-ray, and UV-vis spectroscopy, indicating that zirconia and silver layers were successfully coated on the surfaces of silica microspheres.     

Synthesis, characterization and infrared emissivity study of polyurethane/TiO2 nanocomposites

In this study, polyurethane/titania (PU/TiO₂) nanocomposites were prepared in ultrasonic process and characterized by fourier transform IR spectroscopy (FT-IR), powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and infrared emissivity analysis. The TEM and SEM results indicated that the nanoparticles were dispersed homogeneously in PU matrix on nanoscale. TGA-DSC confirmed that the heat stability of the composite was improved. Infrared emissivity study showed that the nanocomposite possessed lower emissivity value than those values of pure polymer and nanoparticles.     

Synthesis and characterization of spherical core-shell particles SiO2@AgEu(MoO4)2

Submicron spherical SiO₂ particles have been coated with AgEu(MoO₄)₂ phosphor layers by a sol-gel process, followed by surface reaction at high temperature, to get core/shell structured SiO₂@AgEu(MoO₄)₂ particles. X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) were used to characterize the structure and morphology of the resulted core-shell phosphors. The luminescent properties of the core-shell structured phosphors have also been measured at room temperature, and their photoluminescence (PL) spectra are similar to the pure AgEu(MoO₄)₂ phosphor prepared by the same sol-gel method exhibiting red emission.     

Influence of remaining C on hardness and emissivity of SiC/SiO2 nanocomposite coating

SiC/SiO₂ nanocomposite coating was deposited by electron beam-physical vapor deposition (EB-PVD) through depositing SiC target on pre-oxidized 316 stainless steel (SS) substrate. High melting point component C remained and covered on the surface of ingot after evaporation. When SiC ingot was reused, remaining C had an effect on the composition, hardness and emissivity of SiC/SiO₂ nanocomposite coating. The composition of ingot and coating was studied by X-ray photoelectron spectroscopy (XPS). The influence of remaining C on hardness and spectral normal emissivity of SiC/SiO₂ nanocomposite coating was investigated by nanoindentation and Fourier transform infrared spectrum (FTIR), respectively. The results show that remaining C has a large effect on hardness and a minor effect on spectral normal emissivity of SiC/SiO₂ nanocomposite coating.     

Optically active helical polyurethane@attapulgite composites: Effect of optical purity of S-1,1′-binaphthyl-2,2′-diol on infrared emissivity

Helical polyurethane@attapulgite (HPU@ATT) composites were prepared after the surface modification of the rod-like attapulgite (ATT). HPU@ATT composites based on S-1,1′-binaphthyl-2,2′-diol (S-BINOL) with different optical purity (O.P.) were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results indicate that the helical polyurethane has been successfully grafted onto the surfaces of the modified ATT without destroying the original crystalline structure of ATT. The rod-like nanoparticles were confirmed by transmission electron microscopy (TEM). Infrared emissivity values of HPU@ATT composites have been investigated, and the results indicate that the optical purity of monomer plays a very important role in the infrared emissivity for HPU@ATT owing to the effect of helical conformation and interchain hydrogen bonds. Along with the increased optical purity of S-BINOL, the infrared emissivity of HPU@ATT is reduced evidently. Infrared emissivity value of HPU@ATT based on S-BINOL with 100% optical purity is the lowest one (0.431).     

Electron beam-physical vapor deposition of SiC/SiO2 high emissivity thin film

When heated by high-energy electron beam (EB), SiC can decompose into C and Si vapor. Subsequently, Si vapor reacts with metal oxide thin film on substrate surface and formats dense SiO₂ thin film at high substrate temperature. By means of the two reactions, SiC/SiO₂ composite thin film was prepared on the pre-oxidized 316 stainless steel (SS) substrate by electron beam-physical vapor deposition (EB-PVD) only using β-SiC target at 1000 °C. The thin film was examined by energy dispersive spectroscopy (EDS), grazing incidence X-ray asymmetry diffraction (GIAXD), scanning electron microscopy (SEM), atomic force microscopy (AFM), backscattered electron image (BSE), electron probe microanalysis (EPMA), X-ray photoelectron spectroscopy (XPS) and Fourier transformed infra-red (FT-IR) spectroscopy. The analysis results show that the thin film is mainly composed of imperfect nano-crystalline phases of 3C-SiC and SiO₂, especially, SiO₂ phase is nearly amorphous. Moreover, the smooth and dense thin film surface consists of nano-sized particles, and the interface between SiC/SiO₂ composite thin film and SS substrate is perfect. At last, the emissivity of SS substrate is improved by the SiC/SiO₂ composite thin film.     

Synthesis and characterization of core-shell structured SiO2@YVO4:Yb,Er microspheres

In this paper, the core-shell structured SiO₂@YVO₄:Yb³⁺,Er³⁺ microspheres have been successfully prepared via a facile sol-gel process followed by a heat treatment. X-ray diffraction, field emission scanning electron microscopy, energy disperse X-ray spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and photoluminescence spectra were used to characterize the samples. The results reveal that the SiO₂ spheres have been successfully coated by YVO₄:Yb³⁺,Er³⁺ phosphors to form core-shell structures and the size of obtained microspheres has a uniform distribution. Additionally, the samples exhibit bright green luminescence under the excitation of a 980 nm laser diode. The photoluminescence intensity increases with the number of coatings. These core-shell structured SiO₂@YVO₄:Yb³⁺,Er³⁺ microspheres may have great potential in the fields of infrared detection and display devices.     

Core/shell structured ZnO/SiO2 nanoparticles: Preparation, characterization and photocatalytic property

ZnO nanoparticles were prepared by a simple chemical synthesis route. Subsequently, SiO₂ layers were successfully coated onto the surface of ZnO nanoparticles to modify the photocatalytic activity in acidic or alkaline solutions. The obtained particles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS) and zeta potential. It was found that ultrafine core/shell structured ZnO/SiO₂ nanoparticles were successfully obtained. The photocatalytic performance of ZnO/SiO₂ core/shell structured nanoparticles in Rhodamine B aqueous solution at varied pH value were also investigated. Compared with uncoated ZnO nanoparticles, core/shell structured ZnO/SiO₂ nanoparticles with thinner SiO₂ shell possess improved stability and relatively better photocatalytic activity in acidic or alkaline solutions, which would broaden its potential application in pollutant treatment.     

Fabrication and optical properties of 3D composite photonic crystals of core-shell structures

Three-dimensional (3D) composite colloidal photonic crystals with SiO₂ core and ZnO shell were fabricated on borosilicate glass (BSG) substrate by a two-stage deposition method. Scanning electron microscopy (SEM) measurements show that both the pre-deposited SiO₂ and SiO₂/ZnO core-shell structures are oriented with their (1 1 1) axes parallel to the substrates. Optical measurement reveals that the periodic arrays exhibit a photonic band gap in the (1 1 1) direction. The optical properties of SiO₂/ZnO core-shell structures strongly depend on the size dispersions of colloidal spheres and the intrinsic defects in the sample.     

Structural and optical tunability of metallodielectric composites with gradual shell growth

Metallodielectric (gold@silica) composites were prepared by seed and grow method. The dielectric microspheres (core material) of an average size of 400 nm were synthesized by sol–gel method and gold nanoparticles (AuNPs) were prepared by reducing the chloroauric solution. Shell growth around silica (SiO₂) microspheres was carried out in a multistep layer-by-layer process. The synthesized composites were characterized using techniques such as field emission-scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV–Visible (UV–Vis) spectroscopy. FE-SEM and FTIR analyses have confirmed the functionalization of SiO₂ surfaces with the amine terminal group along with the gold shell growth. XRD analysis has given an average crystallite size of 12.3 nm for metallodielectric composites. Absorption spectra have demonstrated the dependence of surface plasmon resonance (SPR) peak on the successive shell growth by exhibiting a red shift.     

Effects of composition ratio on structure and phase transition of ferroelectric nanocomposites from silicon dioxide nanoparticles and triglycine sulfate

The present work is devoted to study on influences of silicon dioxide nanoparticles (SiO₂) on structure and phase transition of a classical ferroelectric of triglycine sulfate (TGS) by synthesizing a composite containing SiO₂ and TGS at different composition weight ratios. Particle size analysis, X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) techniques were utilized to charaterize the synthesized composite. The experiments for investigation of phase transition were conducted from 20 to 120°C under a weak electric field (1?V.cm^?1) at 1?kHz. The results revealed an expansion of ferroelectric phase of TGS by 15–55°C with increasing the SiO₂ content. Besides, an additional phase transition point which is characteristic for the bulk clusters of TGS was found at low content of SiO₂. The detected anomalies were discussed thoroughly based on the interaction between components in the composite.     

Synthesis of bismuth nanocap arrays on quartz substrates and their surface plasmon resonance properties

Bismuth nanocap arrays have been prepared by vacuum depositing Bi films onto the surfaces of self-assembled monolayer arrays of SiO₂ nanoparticles. The surface morphologies, structures, and optical properties of the obtained samples have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), and ultraviolet–visible–near infrared (UV–vis–NIR) spectrophotometer. TEM and AFM images indicated that the SiO₂/Bi composite nanoparticles were incompletely encapsulated and their surfaces were relatively rough. UV–vis–NIR absorption spectra showed that Bi nanocap arrays had strong and tunable surface plasmon resonance peaks in the visible and near infrared regions, which were dependent dramatically on the relative ratio of the SiO₂ core diameter to the Bi cap thickness.     

Preparation and characterizations of SiO2/TiO2/γ-glycidoxypropyltrimethoxysilane composite materials for optical waveguides

SiO₂/TiO₂/γ-glycidoxypropyltrimethoxysilane composite materials processed by the sol-gel technique were studied for optical waveguide applications. Waveguide films with thickness more than 1.7 μm were prepared on a silicon substrate by a single-coating process and low-temperature heat treatment from these high-titanium-content composite materials. Scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal gravimetric analysis (TGA), UV-visible spectroscopy (UV-VIS), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) have been used to characterize the waveguide films. TGA curves showed that organic compounds in the composite materials would decompose in the temperature range from 200 °C to 480 °C. SEM, AFM and UV-VIS results showed that a dense, porous-free, and high transparency in the visible range waveguide film could be obtained at a low heat-treatment temperature. It was also noted that the carbon content in the film with higher titanium content heated at high temperature was evidenced by XPS. The waveguide propagation loss properties of the composite material films were also investigated and showed a dependence on the titanium molar fraction. Received: 13 June 2000 / Accepted: 21 June 2000 / Published online: 20 September 2000     

Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids

Fe₃O₄ magnetic nanoparticles (MNPs) were synthesized by the co-precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide. The sodium citrate-modified Fe₃O₄ MNPs were prepared under Ar protection and were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). To improve the oxidation resistance of Fe₃O₄ MNPs, a silica layer was coated onto the modified and unmodified MNPs by the hydrolysis of tetraethoxysilane (TEOS) at 50 °C and pH 9. Afterwards, the silica-coated Fe₃O₄ core/shell MNPs were modified by oleic acid (OA) and were tested by IR and VSM. IR results revealed that the OA was successfully grafted onto the silica shell. The Fe₃O₄/SiO₂ core/shell MNPs modified by OA were used to prepare water-based ferrofluids (FFs) using PEG as the second layer of surfactants. The properties of FFs were characterized using a UV-vis spectrophotometer, a Gouy magnetic balance, a laser particle size analyzer and a Brookfield LVDV-III+ rheometer.     

Preparation and characterization of antibacterial Au/C core-shell composite

An environment-friendly oxidation-reduction method was used to prepare Au/C core-shell composite using carbon as core and gold as shell. The chemical structures and morphologies of Au/C core-shell composite and carbon sphere were characterized by X-ray diffraction, transmission electron microscope, energy dispersion X-ray spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS). The antibacterial properties of the Au/C core-shell composite against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) were examined by the disk diffusion assay and minimal inhibition concentration (MIC) methods. In addition, antibacterial ability of Au/C core-shell composite was observed by atomic force microscope. Results demonstrated that gold homogeneously supported on the surface of carbon spheres without aggregation and showed efficient antibacterial abilities.     

Synthesis and characterization of monodisperse spherical core-shell structured SiO2@Y3Al5O12:Ce3+/Tb3+ phosphors for field emission displays

Nanocrystalline Y₃Al₅O₁₂: Ce³⁺/Tb³⁺ (average crystalline size 30 nm) phosphor layers were coated on non-aggregated, monodisperse and spherical SiO₂ particles by the sol-gel method, resulting in the formation of core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles. X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, photoluminescence, cathodoluminescence spectra, as well as lifetimes were utilized to characterize the core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ phosphor particles. The obtained core-shell structured phosphors consist of well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ shells on the SiO₂ cores (average size about 500 nm, crystalline size about 30 nm) could be easily tailored by varying the number of deposition cycles (100 nm for four deposition cycles). Under the excitation of ultraviolet and low-voltage electron beams (1–3 kV), the core-shell SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles show strong yellow-green and green emission corresponding to the 5d–4f emission of Ce³⁺ and ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission of Tb³⁺, respectively. These phosphors may have potential application in field emission displays.     

Polishing behavior of PS/CeO2 hybrid microspheres with controlled shell thickness on silicon dioxide CMP

Organic-inorganic composite microspheres with PS as a core and CeO₂ nanoparticles as a shell were synthesized by in situ decomposition reaction of Ce(NO₃)₃ on the surfaces of PS microspheres prepared through soap-free emulsion polymerization. The shell thickness of the composite microspheres could be turned by varying the concentration of Ce(NO₃)₃ in the reaction solution. The whole process required neither surface treatment for PS microspheres nor additional surfactant or stabilizer. The as-synthesized PS/CeO₂ composite microsphere samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). Oxide chemical mechanical polishing (CMP) performance of the PS/CeO₂ composite abrasives with different shell thickness was characterized by atomic force microscopy (AFM). The results indicated that the as-prepared core-shell structured composite microspheres (220-260 nm in diameter) possessed thin shell (10-30 nm) composed of CeO₂ nanoparticles (particle diameter of 5-10 nm), and the final CeO₂ contents of the composite microspheres ranged from 10 to 50 wt%. A possible mechanism for the formation of PS/CeO₂ composite microspheres was discussed also. The CMP test results confirmed that the novel core-shell structured composite abrasives are useful to improve oxide CMP performance. In addition, there is an obvious effect of shell thickness of the composite abrasives on oxide CMP performance.     

Y2Si2O7:Eu/SiO2 core shell phosphor particles prepared by flame spray pyrolysis

This paper reports the synthesis of core shell phosphor particles (Y₂Si₂O₇:Eu/SiO₂) produced by flame spray pyrolysis with yttrium and europium nitrates and colloidal silica dispersed precursor solutions. Particles of various structures were produced, including heterogeneous, core shell and non-spherical core shell particles, depending on the synthesis conditions; the ideal core shell structure was obtained under the highest flame temperature and high silicon concentration in the precursor solution. Based on the phase diagram, the formation of the core shell structure was caused by the separation of each component at the liquid phase in the synthesis route. In the energy-dispersive X-ray spectroscopy, yttrium could be detected only at the core part of the particle, while silicon and oxygen could be detected at both the shell and core parts. Under ultraviolet excitation, the ideal core shell particles of Y₂Si₂O₇:Eu showed photoluminescent characteristics. Consequently, it could be concluded that Y₂Si₂O₇:Eu/SiO₂ core shell phosphor particles were successfully synthesized by flame spray pyrolysis.     

Sol-gel growth of Gd2MoO6:Eu nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6:Eu) and their luminescent properties

SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors were prepared by the sol-gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors. The XRD results demonstrate that the Gd₂MoO₆:Eu³⁺ layers on the SiO₂ spheres begin to crystallize after annealing at 600 °C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 600 nm), are not agglomerated, and have a smooth surface. The thickness of the Gd₂MoO₆:Eu³⁺ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). The Eu³⁺ shows a strong PL luminescence (dominated by ⁵D₀-⁷F₂ red emission at 613 nm) under the excitation of 307 nm UV light. The PL intensity of Eu³⁺ increases with increasing the annealing temperature and the number of coating cycles.     

X-ray and electron spectroscopy investigation of the core-shell nanowires of ZnO:Mn

ZnO/ZnO:Mn core-shell nanowires were studied by means of X-ray absorption spectroscopy of the Mn K- and L_2,3-edges and electron energy loss spectroscopy of the O K-edge. The combination of conventional X-ray and nanofocused electron spectroscopies together with advanced theoretical analysis turned out to be fruitful for the clear identification of the Mn phase in the volume of the core-shell structures. Theoretical simulations of spectra, performed using the full-potential linear augmented plane wave approach, confirm that the shell of the nanowires, grown by the pulsed laser deposition method, is a real dilute magnetic semiconductor with Mn²⁺ atoms at the Zn sites, while the core is pure ZnO.