Syntheses and lipophilicity measurement of N/N-terminus-1,1-dihydroperfluoroalkylated α-amino acids and small peptides

(1,1-Dihydroperfluoroalkyl)phenyliodonium N,N-bis(trifluoromethylsulfonyl)imides (4, n = 0-2) were synthesized and used to transfer the corresponding 1,1-dihydroperfluoroalkyl groups to the α-amino group of (l)tyrosine. The obtained N^α-2,2,2-trifluoroethylated (l)tyrosine (6, n = 0) was further used as the N-terminus in the solid phase peptide synthesis of leucine enkephalin analogue. The lipophilicity of the N^α-1,1-dihydroperfluoroalkylated (l)tyrosines (6, n = 0-2) and N-terminus-2,2,2-trifluoroethylated leucine enkephalin analogue (7), as well as the corresponding parent compounds, was measured.     

Geometrical and Electronic Properties of Neutral and Anionic AlnBm (n?+?m?=?13) Clusters

Successively substituted Al₁₃ cluster by B atom both neutral and anionic Al _n B _m  (n + m = 13) clusters have been investigated by the density functional theory (DFT) at B3LYP/6-31G (d) level, the aim is to understand the evolution of the structural and electronic properties as a function of composition. The results clearly show Al₁₃ cluster as well as Al rich Al _n B _m clusters prefer the icosahedral geometries while increasing boron contents promote quasi-planar configurations. The geometrical structures of the optimized anionic Al _n B _m ⁻ clusters are very close to those of the neutral clusters with smaller structural modifications. Overall, the vertical ionization potential (VIP), the adiabatic electron affinity (AEA), and the energy gaps (E _g ) of Al _n B _m clusters decrease with increasing of substitution. The largest values of second-order energy differences ( \Updelta₂E), VIP\Updelta_{2}E), VIP, and E _g of Al₁₂B cluster indicate it possesses the most stability among all the investigated clusters, which accords to the experimental results. The simulated photoelectron spectroscopies (PES) of Al _n B _m ⁻ clusters have also been discussed in this article.     

Synthesis and characterization of dinuclear p-, m- and o-xylyl bridged complexes of molybdenum and tungsten. The crystal structures of μ-p-xylyl- bis(η-pentamethyl-cyclopentadienyltri- carbonylmolybdenum) and μ-m-xylyl-bis(η- pentamethylcyclopentadienyltricarbonyltungsten)

The reactions of (M = Mo, W) with α,α′-p-, m- and o-dichloro-xylenes yielded p-, m- and o-xylyl bridged dinuclear complexes of in high yields. All of such new complexes are stable to air and water, even stable in dilute acids and bases.     

Identification and Determination of Nicorandil and its Degradation Products by HPLC and GC/MS

Nicorandil [N-(2-hydroxyethyl)-nicotinamide nitrate NIC] is a novel kind of compound in the treatment of angina pectoris. NIC can be degraded easily in storage. The degradation products include N-(2-hydroxyethy) nicotinamide (HN), nitrate ion (NI), and ni…     

Macrocyclic cis- and trans-bis(α-amino acids) and their intraannular Cu(II) complexes. Conformational in-out dichotomy and crystal packing

Macrocyclic bis(α-amino acids) cis- and trans-2a-b were prepared from the selectively protected tris(hydroxymethyl)aminomethane 3. The X-ray structures of the free bis(amino acids) and/or of the corresponding Cu(II) complexes have been determined allowing an unambiguous configurational assessment. At the same time, conformational in-out dichotomy of the functional groups has been demonstrated in the bis(amino acids) as well as in their Cu(II) complexes.     

Thermal expansivity and degradation properties of PLA/HA and PLA/βTCP in vitro conditioned composites

Journal of Thermal Analysis and Calorimetry - The objective of this study was to investigate the thermal expansivities and degradation properties for several in vitro conditioned biodegradable...     

Oxygen nonstoichiometry and the thermodynamic and structural properties of double perovskites PrBaCo2 ? xCuxO5 + δ

The special features of the structure, electrophysical properties, and oxygen nonstoichiometry of new double perovskites PrBaCo_{2 − x} Cu _x O_{5 + δ} were studied. Within the homogeneity region with respect to copper 0 < x ≤ 1, solid solution samples had an orthorhombic structure (space group Pmmm) with the parameters a _p × 2a _p × 2a _p , where a _p ≈ 3.8 ?. The oxygen nonstoichiometry of PrBaCo_{2 − x} Cu _x O_{5 + δ} changes as the copper content increases approximately as δ ≈ 0.85 − x/2. The content of oxygen was measured by coulometric titration over wide temperature and oxygen pressure ranges. The partial thermodynamic functions of labile oxygen were calculated and the limits of the thermodynamic stability of the solid solution were established. Original Russian Text ? A.Yu. Suntsov, I.A. Leonidov, A.A. Markov, M.V. Patrakeev, Ya.N. Blinovskov, V.L. Kozhevnikov, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 5, pp. 954–960.     

Synthesis, crystal and electronic structures, and thermodynamic characteristics of BaCe1 ? xInxO3 ? x/2 solid solutions

New perovskite oxide phases BaCe_{1 − x} In _x O_{3 − x/2} (x = 0.1–0.8) (space group Pbnm) have been synthesized. The unit cell volume of the resulting solid solutions monotonically decreases with an increase in the degree of substitution of indium for cerium due to the contraction of octahedra in perovskite blocks. The thermodynamic stability of the compound BaCe_0.75In_0.25O_2.875 was studied by the solution calorimetry method, and barium cerates were shown to be thermodynamically stable with respect to binary oxides at room temperature. The structure of occupied and vacant states in BaCe_{1 − x} In _x O_{3 − x/2} was determined on the basis of X-ray emission, absorption, and photoelectron spectra, and the energy gap was estimated at ∼2 eV.     

Syntheses of β- and γ-fluorophenyl cis- and trans-α-methylene-γ-butyrolactones

Preparation of a series of cis-γ-fluorophenyl-β-phenyl-α-methylene-γ-butyrolactones is reported via ‘allylboration’ of fluorobenzaldehydes with (E)-methyl 3-phenyl-2-((4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)methyl)acrylate. The corresponding trans-γ-fluorophenyl lactones were prepared either (i) via ‘allylboration’ using the (Z)-reagents or (ii) via an indium triflate-mediated isomerization of the cis-products. The difficulty in isomerizing difluorinated cis-products confirms the probable intermediacy of carbocations. Finally, the synthesis of cis-β-fluorophenyl-γ-phenyl-α-methylene-γ-butyrolactones was achieved via an indium-catalyzed allylation–lactonization of aldehydes with (Z)-2-(bromomethyl)-3-(fluorophenyl)acrylates.     

H/D exchange between CD4 and the OH-groups of H-zeolites and γ-Al2O3

The H/D exchange between CD₄ and OH-groups was studied over zeolite H-ZSM-5, H-mordenite, H-beta and over -Al₂O₃ using the pulsed microcatalytic method. The apparent activation energy of the exchange was found to be independent of the Brönsted acidity of the solid. Results suggested that methane was activated for the reaction by dissociative adsorption over Lewis acid-Lewis base pair sites.     

Phase and valence transitions in Ba2LnSnxSb1−xO6−δ (Ln=Pr and Tb)

Compounds in the double perovskites series Ba₂LnSn_xSb_1−xO_6−δ (Ln=Pr and Tb) have been synthesised and structurally characterised using synchrotron X-ray and neutron powder diffraction. It was found that the two end-members of the Ba₂PrSn_xSb_1−xO_6−δ series both adopt rhombohedral symmetry but the antimonate is a fully ordered double perovskite while the stannate has no B-site cation ordering. X-ray absorption near-edge structure (XANES) and near-infrared spectroscopy indicate that the Pr cations gradually change oxidation state from Pr³⁺ to Pr⁴⁺ with increasing x and that this is likely to be the cause of the loss of B-site ordering. Similarly, both Ba₂TbSbO₆ and Ba₂TbSnO_6−δ are cubic with B-site ordering present in the former but absent in the latter due to the oxidation state change of the Tb from Tb³⁺ to Tb⁴⁺. Multiple linear regression analysis of the Pr and Tb L_III-edge XANES indicates that the rate of Ln³⁺ transforming to Ln⁴⁺ is such that there are no oxygen vacancies in Ba₂PrSn_xSb_1−xO_6−δ but in Ba₂TbSn_xSb_1−xO_6−δ there is a small amount of oxygen vacancies, with a maximum of δ≈0.05 present.     

Miscibility and Crystallization of PHB/PMA Blends

BacterialPoly(5-hydroxybutyrate)(PHB)isabiodegradableandbioc0mpatiblethermo-plasticswithhighmeltingtemperatureandcrystallinity'.Theintrinsicbrittleness0fPHBpreventSitsdirectuseasac0mmoditypolymermaterial.ItisknownthatPHB,sbrittlenessisassociatedwiththecrackswithinthelargespherulitesofPHB2.Hence,itisconsideredthattopreparemiscibleblendsofPHBwithanamorph0usp0lymershouldbeago0dwaytodecreasethebrittleness0fPHBandproducePHBbasedmaterials3'4.PHBisknowntobendsciblewithPoly(vinylacetate)(P…     

Benzidine and diphenylamine radical formation on the surface of NaY-zeolite and γ-alumina with and without V2O5

Solutions of benzidine and diphenylamine in benzene produce cation radicals on the surface of zeolite, -alumina and V₂O₅ doped alumina and zeolite. The sequence of the electron acceptor site strength on the surface is as follows:     

Synthesis of cis- and trans-(±)-3-mercaptoproline and pipecolic acid derivatives via thio-Michael addition

The reactivity of 2,3-dehydroproline and 2,3-dehydropipecolic acid methyl ester derivatives with S-nucleophiles in the thio-Michael addition reaction has been explored. The addition of triphenylmethanethiol and subsequent trityl cleavage led to the corresponding cis- and trans-(±)-3-mercaptoproline and pipecolic acid derivatives in good yields.     

Catalytic performance in hydrodesulfurization of thiophene and ir investigation of Co and no adsorption over Co?Mo/Al2O3 and Ru?Co?Mo/Al2O3 catalysts

A new Ru–Co–Mo/Al₂O₃ catalyst has been prepared by impregnation of Ru salt as a secondary promoter onto Co–Mo/Al₂O₃ catalyst, and it was found that the Ru–Co–Mo/Al₂O₃ exhibited higher activity than Co–Mo/Al₂O₃ in hydrodesulfurization of thiophene to hydrocarbons. Ir studies on Ru–Co–Mo/Al₂O₃ revealed that the Co and NO adspecies increased significantly in intesnities and displayed a bathochromic shift in frequencies, as compared with Co–Mo/Al₂O₃.

---

Ru–Co–Mo/Al₂O₃ Ru, , Co–Mo/Al₂O₃. Co–Mo/Al₂O₃. CO NO, Co Mo, Co–Mo/Al₂O₃. , Mo , Mo³⁺ Mo³⁺ Co Ru–Co–Mo/Al₂O₃.

     

Molecular structure and conformation of triphenylsilane from gas-phase electron diffraction and theoretical calculations, and structural variations in H4?nSiPhn molecules (n?=?1–4)

The molecular structure of triphenylsilane has been investigated by gas-phase electron diffraction and theoretical calculations. The electron diffraction intensities from a previous study (Rozsondai B, Hargittai I, J Organomet Chem 334:269, 1987) have been reanalyzed using geometrical constraints and initial values of vibrational amplitudes from calculations. The free molecule has a chiral, propeller-like equilibrium conformation of C ₃ symmetry, with a twist angle of the phenyl groups τ = 39° ± 3°; the two enantiomeric conformers easily interconvert via three possible pathways. The low-frequency vibrational modes indicate that the three phenyl groups undergo large-amplitude torsional and out-of-plane bending vibrations about their respective Si–C bonds. Least-squares refinement of a model accounting for the bending vibrations gives the following bond distances and angles with estimated total errors: r _g(Si–C) = 1.874 ± 0.004 ?, 〈r _g(C–C)〉 = 1.402 ± 0.003 ?, 〈r _g(C–H)〉 = 1.102 ± 0.003 ?, and ∠_aC–Si–H = 108.6° ± 0.4°. Electron diffraction studies and MO calculations show that the lengths of the Si–C bonds in H_4−n SiPh _n molecules (n = 1–4) increase gradually with n, due to π → σ*(Si–C) delocalization. They also show that the mean lengths of the ring C–C bonds are about 0.003 ? larger than in unsubstituted benzene, due to a one hundredth angstrom lengthening of the C_ipso–C_ortho bonds caused by silicon substitution. A small increase of r(Si–H) and decrease of the ipso angle with increasing number of phenyl groups is also revealed by the calculations.     

Photo‐oxidation and Stabilization of sPP and iPP/Boehmite‐Disperal Nanocomposites

Photo‐oxidation studies on polypropylene (PP)/organoclay nanocomposites were performed. Nanocomposites of isotactic (iPP) and syndiotactic (sPP) polypropylene were prepared by melt compounding. The nanofiller was Boehmite Disperal OS2–alumina hydrates (Al(OH)O) modified by C10–C13 alkylbenzene sulfonic acid. The nanofiller content was 1, 5, and 10 wt%. There is a clear pro‐degradation effect of filler for both types of polypropylene used. The extent of this effect depends on the amount of filler and type of polypropylene used. In the case of sPP samples, the pro‐degradation effect is proportional to the amount of filler in the whole concentration range of filler content used. In the case of iPP, there is a pro‐degradation plateau at 5 wt% content of filler and higher concentration of filler (10 wt%) does not increase the rate and the course of photo‐oxidation. Two long term stabilizers of HAS family were tested ‐ commercial oligomeric stabilizer Chimassorb 944 (CHIM) and synthesized combined HAS/phenol (TMP). Stabilizing efficiency depends on the filler content. CHIM is able to stabilize just the nanocomposites with the lowest content (1 wt%) of filler. There is no stabilizing effect of this HAS in the case of the higher amount of nanofiller (5 and 10 wt%) in both types of polypropylene. By contrast, the combined HAS/phenol‐TMP revealed some stabilizing efficiency over the whole range of filler content. The possible reasons for this difference are discussed. Interactions of filler with some HAS stabilizers were studied in cyclohexane as a model liquid for polypropylene by UV‐spectroscopy. Interaction resulted in the fixing of additive on filler. Much stronger interaction has been obtained for oligomeric CHIM in comparison with low molecular HAS.     

Hollow Fe4C/FeP Nanoboxes with Heterostructure and Carbon Armor for Efficient and Stable Hydrogen Evolution

The heterojunction interfacial modulation of FeP is an effective strategy to regulate the intrinsic activity and stability, which is a major challenge to promote the industrial application of FeP-based electrocatalysts. Herein, hollow Fe₄C/FeP box with heterojunction interface and carbon armor is successfully synthesized, which can expose numerous active sites and protect catalyst from corrosion. Electrochemical measurements show that Fe₄C/FeP exhibits excellent hydrogen ev...     

Synthesis and RNA-selective hybridization of α-l-ribo- and β-d-lyxo-configured oligonucleotides

Three α-l-ribofuranosyl analogues of RNA nucleotides (α-l-RNA analogues) have been synthesized and incorporated into oligonucleotides using the phosphoramide approach on an automated DNA synthesizer. The 4′-C-hydroxymethyl-α-l-ribofuranosyl thymine monomer was furthermore synthesized. Relative to the unmodified duplexes, incorporation of a single α-l-RNA monomer into a DNA strand leads to reduced thermal stability of duplexes with DNA complements but unchanged thermal stability of duplexes with RNA complements, whereas incorporation of more than one α-l-RNA monomer lead to moderately decreased thermal stability also of duplexes with RNA complements. Efficient hybridization with an RNA complement and no melting transition with a DNA complement were observed with stereoregular chimeric oligonucleotides composed of a mixture of α-l-RNA and affinity enhancing α-l-LNA monomers (α-l-ribo-configured locked nucleic acid). Furthermore, duplexes formed between oligodeoxynucleotides containing an α-l-RNA monomer and complementary RNA were good substrates for Escherichia coli RNase H. RNA-selective hybridization was also achieved by the incorporation of 1-(4-C-hydroxymethyl-β-d-lyxofuranosyl)thymine monomers into a DNA strand, whereas stable duplexes were formed with both complementary DNA and RNA when these monomers were incorporated into an RNA strand.     

Neutron powder diffraction and difference maximum entropy method analysis of protium- and deuterium-dissolved BaSn0.5In0.5O2.75+α

We propose a new method, a difference maximum entropy method (MEM) analysis of the neutron diffraction data, for revealing the detailed structure around hydrogen atoms in proton-conducting oxides. This MEM analysis uses the differences between the structure factors of protium- and deuterium-dissolved crystals. Simulations demonstrate that it not only provides the distribution of hydrogen atoms alone, but also improves the spatial resolution of MEM mapping around hydrogen atoms. Applied to actual diffraction data of protium- and deuterium-dissolved BaSn_0.5In_0.5O_2.75+α at 9 K, difference MEM analysis reveals that O-D bonds mostly tilt towards the second nearest oxygen atoms, and that the distributions of deuterium and oxygen atoms are probably insignificant in interstitial regions.