Inclusion complexes of cyclodextrins with hydrophobic ionic liquids

Two imidazolium-based hexafluorophosphate ionic liquids (ILs), 1-butyl-3-methylimidazolium hexafluorophosphate and 1-dodecyl-3-methylimidazolium hexafluorophosphate, were used to form inclusion complexes (ICs) with α- and β-cyclodextrins (CDs). Formation of the ICs of each CD with each IL was confirmed by the appearance of a characteristic peak in the UV region. Characterisation of the ICs by NMR and FT-IR spectroscopy provided information about the interactions between the host and guest molecules and the structure of the ICs. Temperature-dependent particle size analysis by dynamic light scattering suggested that the size of the host and the guest governs their stability.     

Structure and dynamics of perfluoroalkane/beta-cyclodextrin inclusion compounds as studied by solid-state 19F MAS and 1H -->19F CP/MAS NMR spectroscopy

The molecular structure and dynamics of novel inclusion compounds (ICs) consisting of n-perfluoroalkane (PFA) guests and beta-cyclodextrin (beta-CD) host (PFA/beta-CD) have been investigated using 19F magic angle spinning (MAS) and 1H-->19F cross polarization (CP)/MAS NMR spectroscopy with the aid of thermal analyses, FT-IR spectroscopy, and X-ray diffraction method. The ICs of C9F20/beta-CD and C20F42/beta-CD were successfully obtained as precipitates from mixtures of respective PFAs and saturated aqueous solution of beta-CD. The wide-angle X-ray diffraction (WAXD) revealed that C9F20/beta-CD forms a channel-type crystallite, while C20F42/beta-CD is nearly amorphous at room temperature. The structural orders in both ICs increase at elevated temperatures. The 19F NMR signals obtained by the direct polarization (DP) method for PFA/beta-CD are resonated at higher frequencies than those for original PFA. This can be ascribed to the lower dielectric environment of the beta-CD cavity. Above 80 degrees C, 1H-->19F CP/MAS NMR technique revealed that C9F20 molecules undergo vigorous molecular motion and partly come out of the beta-CD channel. However, the guests hardly degrade or evaporate unless the host is pyrolytically decomposed above ca. 300 degrees C. The spin-lattice relaxation times in the laboratory frame for 19F (T1F) are almost identical for all the fluorines in PFA/beta-CD at each temperature, while significantly different values were observed for fluorines in neat PFA. This indicates that effective intramolecular spin diffusion occurs within a PFA molecule included in beta-CD.     

Supramolecular aggregations through the inclusion complexation of cyclodextrins and polymers with bulky end groups

Mono‐polyhedral oligomeric sillsesquioxane‐end capped poly(ε‐caprolactone) (mPPCL) can form inclusion complexes (ICs) with α‐ and γ‐cyclodextrins (CDs) but not with β‐CD. These CD ICs have been characterized with X‐ray diffraction, solid‐state ¹³C cross‐polarization/magic‐angle‐spinning NMR spectroscopy, ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. The poly(ε‐caprolactone) (PCL) chain of mPPCL is included within the channel provided by the CDs to form a columnar, crystalline structure. The PCL/CD ratios determined by ¹H NMR spectroscopy for the ICs with α‐ or γ‐CDs are higher than the stoichiometries because of the steric hindrance of the bulky polyhedral oligomeric silsesquioxane chain end and result in a fraction of the ε‐caprolactone units free from complexation with the CDs. On the basis of these analyses, we propose some possible structures for these CD/mPPCL ICs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 125–135, 2007     

Encapsulation of vortioxetine with cyclodextrins via host–guest inclusion complex: Synthesis,characterization, solubility,and in vitro dissolution studies

Drug solubility plays a significant role in the development of drug formulation. The objectives of this work are to improve the solubility and dissolution rate of vortioxetine (VT) by preparing its inclusion complexes (ICs) with β-Cyclodextrin (β-CD) and γ-Cyclodextrin (γ-CD). The ICs were prepared in 1:1 M ratio via recrystallization method and characterized by P-XRD, FT-IR, ¹H NMR, 2D NOESY, and DSC. Further, the crystal structure of VT-β-CD was analyzed by SC-XRD. P-XRD data obtained for ICs describe the crystalline pattern. The DSC analysis shows change in the thermal behavior of VT, CDs and ICs. FT-IR analysis shows shifting of frequencies in ICs when compared with the pristine VT drug and CDs. The 2D NOESY in DMSO-d⁶ indicates weak interaction between the VT and CD molecules. The crystal structure of VT-β-CD consists of one guest VT, one host CD, and nine water molecules in the crystal lattice. The solubility of ICs was significantly improved in distilled water, pH 1.2 acidic, and phosphate buffer pH 6.8 medium, as compared with the solubility of the pristine VT drug. The in vitro dissolution rate of ICs in different dissolution media was investigated, which was higher than that of the commercial product of VT.     

Preparation and characterization of inclusion complexes of beta-cyclodextrin with ionic liquid

The solubilities of beta-cyclodextrin (beta-CD), ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), and their mixture in water were determined, and the conductivity of these aqueous solutions was measured. It was demonstrated that beta-CD and bmimPF6 could enhance the solubility of each other, and the solubility curves of each were linear with gradients of about 1. The conductivity decreased remarkably with increasing beta-CD concentration, and a discernible break in the conductivity curve could be observed when beta-CD and bmimPF6 were equimolar in the solution. The solubility and conductivity results indicated that inclusion complexes (ICs) of 1:1 stoichiometry were formed. The inclusion compounds were further characterized by using powder X-ray diffraction (XRD) analysis, 13C CP/MAS (cross-polarization magic-angle spinning) NMR and 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The results showed that the ICs were a fine crystalline powder. The host-guest system exhibited a channel-type structure and each glucose unit of beta-CD was in a similar environment. The decomposition temperature of the ICs was lower than that of bmimPF6 and beta-CD individually.     

Inclusion complexes of beta-cyclodextrin with ionic liquid surfactants

The three kinds of ionic liquid (IL) surfactants, 1-dodecyl-3-methylimidazolium hexafluorophosphate (C(12)mimPF(6)), 1-tetradecyl-3-methylimidazolium hexafluorophosphate (C(14)mimPF(6)), and 1-hexadecyl-3-methylimidazolium hexafluorophosphate (C(16)mimPF(6)), were used to form the inclusion complexes (ICs) with beta-cyclodextrin (beta-CD). The surface tension measurements revealed that there were two kinds of inclusion formations, 1:1 and 1:2 (beta-CD/IL) stoichiometry for beta-CD-C(12)mimPF(6) and beta-CD-C(14)mimPF(6) ICs, and only 1:1 stoichiometry for beta-CD-C(16)mimPF(6) ICs. These inclusion compounds were further characterized by XRD, (13)C CP/MAS NMR, (1)H NMR, rotating frame nuclear Overhauser effect spectroscopy (ROESY), and thermogravimetry (TGA). The results showed that these ICs were fine crystalline powder. The host-guest system presented a channel-type structure, and each glucose unit of beta-CD was in a similar environment. It was suggested that hydrophobicity played a crucial role in supporting the formation of ICs. The decomposition temperature of these ICs was lower than those of their precursors. Furthermore, the possible inclusion structures were also speculated. These inclusion behaviors are likely to be used to recover ILs in the process of their preparation.     

Microstructural Characterization of Diblock Copolymers Formed by Styrene and Different Methacrylic Units

FT-IR, DSC, and NMR techniques allowed the structural characterization of four copolymers formed by styrene and methacrylic units (methacrylic acid (MAA), dimethylamine ethyl methacrylate (DMAEMA), sodium methacrylate (MANa), and 1-hydroxyethyl methacrylate (HEMA). The copolymer composition was studied by Fourier transform-infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of the block copolymers was analyzed by differential scanning calorimetry (DSC). Three of the four copolymers showed two transitions caused by changes in the polymer heat capacity (ΔCp) of each block. Diffusion-ordered spectroscopy (DOSY) experiments were used to distinguish copolymer from homopolymer mixtures. Finally, the triad-level stereosequences of styrene-methacrylic copolymers were obtained using ¹³C NMR. The results indicate that by increasing the alkyl-substituent length in the methacrylic block, the probability of syndiotactic polymerization increases.     

Inclusion complexes of α-cyclodextrins with poly(d,l-lactic acid): structural,characterization, and glass transition dynamics

Poly (d,l-lactic acid) (PDLLA) was combined with α-CD to form inclusion complexes (ICs) with distinct PDLLA fractions. The structural changes resulting from this coalescence process were analyzed by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), and X-ray diffraction (XRD). The presence of both components in the ICs was confirmed by FTIR. The encapsulated PDLLA fraction was quantified by ¹H NMR. XRD data evidenced that it was possible to transform the amorphous PDLLA into a well-organized channel-type crystalline structure. DSC showed that the glass transition temperature of the PDLLA fraction in the ICs was higher than in the pure polymer, indicating that the ultra-confinement effect imposed by the ICs organization clearly limits PDLLA molecular dynamics. The confinement effect on the glass transition dynamics was investigated by unconventional dynamic mechanical analysis experiments, which confirmed that ICs segmental mobility is highly restricted when compared with the one of pure PDLLA. Bulk PDLLA presents a typical VFTH behavior while the ICs dynamics shows an Arrhenius trend.     

Preparation and characterization of gold nanoparticles capped by peptide-biphenyl hybrids

Gold nanoparticles were prepared using peptide-biphenyl hybrids (PBHs) as capping agents. AuNPs were characterized by different techniques including UV-Vis, TEM, EDX, FT-IR, elemental analysis, (1)H NMR and (13)C CP/MAS NMR spectroscopy. TEM analysis showed that AuNPs present diameters in the range of 1.8-3.7 nm, depending on the structure and the amount of the capping PBH used. FT-IR spectroscopy and solid-state (13)C NMR revealed that the carboxylic group of PBHs, especially in the case of the acid ligands, interacts with the gold surface (in the form of carboxylate). The results confirm that PBHs are excellent stabilizers of AuNPs, being one of the first examples on the use of peptidomimetics-gold hybrid materials.     

新型Salen型配合物的合成和表征及轴向配位热力学

采用金属模板法合成了四个新型Salen型单、双核金属配合物,并用元素分析、核磁共振(1HNMR)、电喷雾质谱(ESI-MS)、傅里叶变换红外光谱(FT-IR)等手段进行了表征.使用紫外-可见(UV-Vis)光谱滴定法和圆二色(CD)光谱研究了主体金属镍配合物与咪唑类含氮小分子的轴向配位反应热力学性质.结果表明:主体与咪唑(Im)和N-甲基咪唑(N-MeIm)的配位数是2,而与2-Et-4-MeIm和2-MeIm的配位数是1;轴配体系的热力学数据显示主体与咪唑类配体的平衡常数按K苓(Im)K苓(N-MeIm)K苓(2-Et-4-MeIm)K苓(2-MeIm)顺序依次减小;测得的△rHm苓和△rSm苓数据表明该轴向配位反应为放热、熵增加过程.     

Inclusion Compounds Formation of Poly(azomethine ether)s and β‐Cyclodextrin

In this study, two poly(azomethine ether)s were synthesized and they can form inclusion compounds (ICs) with β‐cyclodextrin (β‐CD). Fourier transform infrared (FTIR) spectroscopy, ¹H nuclear magnetic resonance spectroscopy (¹H‐NMR), thermogravimetric analysis (TGA), X‐ray diffraction (XRD) have been utilized to observe the formation of polymer‐CD‐ICs. The differentiation in their FTIR spectra may indicate the formation of the inclusion compounds between poly(azomethine ether)s and β‐CD. Compared the ¹H‐NMR of polymer‐CD‐ICs with β‐CD, proton signals belonging to both β‐CD and poly(azomethine ether)s can be found in the spectrum. The chemical shift of the protons H‐3, H‐5 has changed after the formation of inclusion compounds, which is perhaps due to the interaction of these protons with polymers. TGA scans showed the much higher decomposition temperatures observed for two polymer‐CD‐ICs may imply that polymer chains included inside the β‐CD's cavity can greatly improve β‐CD's stabilities. The X‐ray diffraction patterns were confirmed to be the new crystal structures.     

Synthesis, characterization, degradation of biodegradable castor oil based polyesters

A new family of castor oil based biodegradable polyesters was synthesized by catalyst free melt condensation reaction between two different diacids and castor oil with d-mannitol. The polymers synthesized were characterized by NMR spectroscopy, FT-IR and the thermal properties were analysed by DSC. The results of DSC show that the polymer is rubbery in physiological conditions. The contact angle measurement and hydration test results indicate that the surface of the polymer is hydrophilic. The mechanical properties, evaluated in the tensile mode, shows that the polymer has characteristics of a soft material. In vitro degradation of polymer in PBS solution carried out at physiological conditions indicates that the degradation goes to completion within 21 days and it was also found that the rate of degradation can be tuned by varying the curing conditions.     

Inclusion complex formation between alpha-cyclodextrin and biodegradable aliphatic polyesters

Inclusion complexes (ICs) between alpha-cyclodextrin (alpha-CD) and three kinds of biodegradable aliphatic polyesters with different sequence lengths of the monomeric repeating units poly(3-hydroxypropionate) [P(3HP)], poly(4-hydroxybutyrate) [P(4HB)] and poly(epsilon-caprolactone)(PCL) were prepared by mixing a solution of alpha-CD with that of the polymer, followed by stirring. The ICs were obtained as insoluble precipitates and characterized by FT-IR, WAXD and DSC. All measurements showed that the polymer chains of all three kinds of polyester were included into the alpha-CD cavity and formed ICs with different stoichiometries. WAXD patterns and thermal analysis indicated that these ICs possessed a channel structure and the crystallization of the polyester chains was suppressed upon inclusion into the alpha-CD cavity.     

Characterization of microwave-synthesized polydextrose and its radical-scavenging activity

Polydextrose (PD) was rapidly synthesized under microwave irradiation using glucose as substrate and phosphoric acid as catalyst. The reaction products were identified by methylation analysis, Fourier- Transform Infrared (FT-IR) and NMR spectroscopy. The FT-IR spectra confirmed the polymerization of glucose to form PD. Methylation analysis and ¹H NMR and ¹³C NMR assignments indicated that the PD was a highly branched polysaccharide. The results of radical scavenging activity assays showed that this PD exhibited a potent free hydroxyl radical scavenging activity. This synthetic method can be used to produce PD for the food industry.     

HYDROGEN-BONDING INDUCED CHANGE OF CRYSTALLIZATION BEHAVIOR OF POLY（BUTYLENE SUCCINATE） IN ITS MIXTURES WITH BISPHENOL A

In the present work, the blend of poly（butylene succinate） （PBS） and bisphenol A （BPA） was prepared by solution mixing, and the intermolecular interactions between the two components were characterized by a combination of nuclear magnetic resonance （NMR） and Fourier transform infrared spectroscopy （FTIR）. The results showed that intermolecular hydrogen-bonding forms between the carbonyl group of PBS and phenol hydroxyl of BPA. With the increase of BPA content, more hydrogen bonds were formed. The effect of hydrogen bonding on the crystallization behavior of PBS was investigated by differential scanning calorimetry （DSC） and polarized optical microscopy （POM）. The results showed that the overall isothermal crystallization kinetics and the spherulite growth rate of PBS decrease with the increase of BPA content, while the PBS spherulite size increases with BPA content.     

Supramolecular inclusion complexes of star‐shaped poly(ε‐caprolactone) with α‐cyclodextrin

Both star‐shaped poly(ε‐caprolactone) (PCL) having 4 arms (4sPCL) and 6 arms (6sPCL) and linear PCL having 1 arm (LPCL) and 2 arms (2LPCL) were synthesized and then investigated for inclusion complexation with α‐cyclodextrin (α‐CD). The supramolecular inclusion complexes (ICs) were in detail characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, solid‐state carbon nuclear magnetic resonance spectroscopy using cross‐polarization and magic‐angle spinning, and Fourier transform infrared, respectively. The stoichiometry (CL:CD, mol:mol) of all ICs increased with the increasing branch arm of PCL polymers, and it was in the order of α‐CD‐6sPCL1 ICs > α‐CD‐4sPCL ICs > α‐CD‐2LPCL ICs > α‐CD‐LPCL ICs. All analyses indicated that the branch arms of star‐shaped PCL polymers were included into the hydrophobic α‐CD cavities and their original crystalline properties were completely suppressed. Moreover, the ICs of star‐shaped PCL with α‐CD had a channel‐type crystalline structure similar to that formed between the linear PCL and α‐CD. Furthermore, the thermal stability of the free PCL polymers probably controlled that of the guest polymers included in the ICs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4721–4730, 2005     

Ion pairing between Cl- or ClO4- and alkali metal complexes of ionophore antibiotics in organic solvents: a multinuclear NMR and FT-IR study

The extent of ion pairing in chloride and perchlorate salts was studied by measurement of the Cl- and ClO4- resonances and the observation of the perchlorate stretching frequency by use of nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared spectroscopy (FT-IR), respectively, for a variety of ionophores in various solutions and in large unilaminar vesicles (LUVs). The NMR line widths of chloride and perchlorate were larger in solutions containing the neutral ionophores valinomycin (Val) and nonactin (Non) than in solutions containing the negatively charged ionophores nigericin (Nig), lasalocid (Las), and monensin (Mon). The viscosity-corrected perchlorate NMR line widths in solutions containing Val and Las were significantly negatively correlated (r2 > or = 0.99) with the dielectric constant of the solvent. Solvents with low dielectric constants favored ion pair formation. From methanolic solutions containing the Li+, Na+, K+, and Cs+ salts of Cl- and ClO4-, it was determined that the cation with the highest selectivity for the ionophore affords the most ion pairing. A decrease in pH from 7 to 3 had no significant effect on the NMR line widths of chloride and perchlorate in methanolic solutions containing Val, whereas a similar decrease in pH in a methanolic solution containing Mon caused a 2-fold increase in the line widths. The FT-IR difference spectrum of KClO4 in a methanolic solution containing Val showed splitting at the perchlorate stretching frequency. No band splitting was observed in the FT-IR difference spectrum of KClO(4) in methanolic solutions containing Las. The efflux of 35Cl in LUVs containing the neutral ionophore Val followed first-order kinetics with an efflux constant of 1.70 x 10(-3) x min(-1), as determined by 35Cl NMR spectroscopy. The induction of increased membrane permeability in LUVs by the ionophore was determined to be negligible for Val and Nig by fluorescence spectroscopy.     

Synthesis,characterization and catalytic properties of cationic N-heterocyclic carbene silver complexes

Three new dibenzimidazolium salts bridged by 2-methylenepropane-1,3-diyl group were synthesized. Their dinuclear N-heterocyclic carbene Ag(I) complexes were prepared by the reactions of these salts with Ag₂O. The structures of the synthesized compounds were defined by nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), elemental analysis, and LC-MSMS (for complexes) techniques. Stability of the silver complexes was confirmed by ¹H NMR spectroscopy. Catalytic activities of Ag(I) compounds were tested for three-component coupling reaction of some aldehydes, amines, and phenylacetylene.     

Characterization of radix rehmanniae processing procedure using FT-IR spectroscopy through nonnegative independent component analysis

A method is proposed for monitoring the radix rehmanniae proparate processing procedure and determining the endpoint of the process using attenuated total reflectance (ATR) FT-IR through nonnegative independent component analysis (ICA). In the proposed method, ATR FT-IR spectra of the samples were firstly measured at different steaming periods. Then, nonnegative ICA was used for direct estimation of the feature spectra of the pure components in the mixture without pre-separation and other prior information. The estimated independent components (ICs) and their variation of the relative concentrations were used to characterize the processing procedure and determine the endpoint. The results show that the estimated three ICs are consistent with that of the chemical components in the mixtures, i.e. catalpol/rehmaionoside, glucose, and other compounds that nearly keep invariant during the processing procedure. The endpoint determined by the IR-ICA method is 15 h, which was located in the range obtained by expert sensory analysis, whereas the endpoint determined by the traditional sensory analysis is 14 ∼ 17 h and even 14 ∼ 20 h, which showed the significant deviation of the endpoints determined by different operators. Figure Characterisation of radix rehmanniae processing procedure using FT-IR spectroscopy through nonnegative independent component analysis     

Study on the inclusion interaction of p-sulfonatocalix[n]arenes with norfloxacin

The inclusion complexes of norfloxacin (NFX) with p-sulfonatocalix[n]arenes (SCXn) were studied. The characteristics of host–guest (HG) complexation between p-sulfonatocalix[n]arenes with NFX were investigated by fluorescence spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Stoichiometry and association constants (K) of the inclusion complexes were determined by the non-linear fitting method. An interesting 1:1 stochiometric of HG complexes were formed at different pH values (pH = 3.00, 6.00, 8.00) The inclusion mode of NFX with p-sulfonatocalix[n]arenes was confirmed by NMR spectroscopy.