The Electrochemical Behavior of p-Aminophenol at a ω-Mercaptopropionic Acid Self-Assembled Gold Electrode

A -mercaptopropionic acid (MPA) self-assembled monolayer modified electrode (MPA/SAM/Au) on a gold electrode has been fabricated. The characterization of the MPA/SAM/Au was investigated using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. impedance. The electrochemical behaviors of p-aminophenol (p-AP) were studied at the MPA/SAM/Au by cyclic voltammetry and semi-derivative voltammetry (SDV) in BR buffer solution. The modified electrode shows excellent electrocatalytic activity for the redox of p-AP and accelerates the electron transfer rate. The diffusion coefficient (D) is 4.55×10^–6cm²s^–1. The oxidative peak current increases linearly with the concentration of p-AP in the range of 4.0×10^–88×10^–6molL^–1 and 1.0×10^–52×10^–4molL^–1 by square wave voltammetry response, respectively. The detection limit (three times the signal blank/slope) is up to 1.2×10^–8molL^–1. The modified electrode is able to eliminate the interference of p-benzenediol, o-benzenediol and o-AP at a 40-, 90- or 70-fold concentration of p-AP, and it has been satisfactorily used for the determination of the real sample.     

Solid-Phase Extraction and Spectrophotometric Determination of Trace Amounts of Mercury in Natural Samples

A sensitive and selective solid phase spectrophotometric method for the determination of trace amounts of inorganic mercury is described. Hg²⁺ was sorbed on a silica gel-packed column as an Hg²⁺–N,N-bis(2-mercaptophenyl)ethanediamide (H₂L) complex. The Hg²⁺ complex was eluted from the column using 7mL of acetone. Various parameters including pH, column flow rate, and ligand concentration were optimized. The complex was found to obey Beers law from 2.3 to 73.7µgmL^–1 within the optimum range when the preconcentration factor was two. The effective molar absorption coefficient at 523nm was 1.17×10³Lmol^–1cm^–1 at 523nm. The concentration limits in Beers law dropped from 0.09 to 2.95µgmL^–1 within the optimum range when the preconcentration factor was 50. The relative standard deviation at a concentration level of 5µgmL^–1 Hg²⁺ (9 repetitive determinations) was 1.6%. The detection limits are 0.34µgmL^–1 and 0.015µgmL^–1 when the preconcentration factors are 2 and 50, respectively. The method has been used for routine determination of trace levels of Hg²⁺ in natural waters. The potential application of this method for the removal of Hg²⁺ from natural samples (sea water and lake water) spiked with 100ngmL^–1 of Hg²⁺ was studied. In order to validate the proposed method, LGC 6156 (harbour sediment – extractable metals) was analysed by this method. The results proved that excellent extraction of Hg²⁺ from both natural water samples was obtained by solid phase extraction using N,N-bis(2-mercaptophenyl) ethanediamide.     

Concerning the absorption and emission properties of phenanthro[1,10,9,8,o,p,q,r,a]perylene-7,14-dione

Summary In contrast to hitherto published data, phenanthro[1,10,9,8,o,p,q,r,a]perylene-7,14-dione, the fundamental chromophoric system of hypericin type compounds, exhibits an absorption with a long wavelength band at 423 nm in aprotic solvents like dimethylsulfoxide (7000). Its fluorescence in these solvents is below the detection limit. In protic solvents like methanol, the long wavelength absorption is bathochromically shifted to 546 nm, and a fluorescence at 565 nm is observed. This behavior was interpreted from the reversal ofn – * and – * transitions. The data have not been recorded yet due to the very low solubility of this compound. Its monoprotonation in ground and excited states is characterized bypK _a andpK* _a values of –6 and 2; diprotonation occurs at apK _a=–7.

---

Absorptions- und Emissions-Eigenschaften von Phenanthro[1,10,9,8,o,p,q,r,a]perylen-7,14-dion (Kurze Mitt.)

Zusammenfassung Im Gegensatz zu bislang publizierten Daten zeigt Phenanthro[1,10,9,8,o,p,q,r,a]perylen-7,14-dion, das fundamentale chromophore System der Hypericintyp-Verbindungen, in aprotischen Lösungsmitteln wie Dimethylsulfoxid eine Absorption mit einer langwelligen Bande bei 423 nm (7000). In diesen Lösungsmitteln ist Fluoreszenz nicht nachweisbar. In protischen Lösungsmitteln wie Methanol wird die langwellige Bande bathochrom verschoben (546 nm) und bei 565 nm tritt Fluoreszenz auf. Dieses Verhalten wurde mit der Umkehr in der Reihenfolge vonn – * und – * Übergängen interpretiert. Die Daten wurden wegen der extremen Schwerlöslichkeit dieser Verbindung bislang nicht erhalten. Die Monoprotonierung im Grund- und Anregungszustand ist durchpK _a- undpK* _a -Werte von –6 und 2 charakterisiert; die Diprotonierung tritt beipK _a=–7 ein.

     

Application of l-cysteine-capped nano-ZnS as a fluorescence probe for the determination of proteins

Nanometer-sized l-cysteine-capped ZnS particles have been synthesized and used as a fluorescence probe to investigate the effect of proteins on fluorescent intensity. With =190 nm, maximum and constant synchronous fluorescence enhancement was produced at 267 nm and pH 5.12 in the presence of proteins. A highly sensitive synchronous fluorescence method for the rapid determination of proteins has been developed. Under optimum conditions, calibration graphs are linear over the range 0.03–8.0 g mL^–1 for bovine serum albumin (BSA), 0.01–6.0 g mL^–1 for human serum albumin (HSA), 0.05–8.0 g mL^–1 for -globulin (-G), and 0.04–4.0 g mL^–1 for ovalbumin, respectively. The relative standard deviations of seven replicate measurements were 1.75% for 1.0 g mL^–1 BSA, 1.90% for 1.0 g mL^–1 HSA, 1.65% for 1.0 g mL^–1 -G, and 2.32% for 1.0 g mL^–1 ovalbumin.     

Crystal Structure of Curcumenol: Evidence of Asymmetric O–H...O (bridged) Hydrogen-Bonded Closed Dimer

Curcumenol, C₁₅H₂₂O₂, was isolated from Globba malaccensis Ridl. The compound was crystallized from ethylacetate/hexane solution in the monoclinic system, space group C2, with cell dimensions a = 16.8467(4) , b = 7.6799(2) , c = 11.8613(10) , = 115.9970(10)°. The molecules form a distorted centrosymmetric dimer linked by hydrogen bonds between the hydroxyl O2 atom and the bridged O1 ether atom (O2...O1(–x+2, y, –z+1), 2.8297(15) ; (O2–H2O–O1), 169(2)°). This is an interesting example of an O–H...O (bridged ether) asymmetric hydrogen-bonded dimer.     

Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

r 12-Dependent terms in the wave function as closed sums of partial wave amplitudes for large l

The ansatz = (1+1/2r₁₂)+ with the bare nuclear (or screened nuclear) wave function and expanded in products of one-electron functions is explored for second-order perturbation theory and for variational calculations of the ground state of Helium-like ions.The energy increments E _l ⁽²⁾ corresponding to the partial wave expansion of go asymptotically as l^–8, while conventional partial wave increments go as l^–4. is coupled to by a residual interaction U₁₂ that has no singularity for r₁₂=0. With the present ansatz it is sufficient to include l-values up to 5 in order to get the second-order energy accurate to one microhartree. For the same accuracy l4 is sufficient in a CI with correlated reference function while in conventional CI one must go to l50. The surprisingly faster convergence of the variational approach as compared to second-order perturbation theory is explained. The slow convergence of the traditional partial wave expansion is entirely due to the attempt to represent the quantity 1=¦r₁₂r₁₂ ^–1¦ by its partial wave expansion. The best reference function shows very little shielding and resembles closely the eigenstate of the bare nuclear Hamiltonian. The generalization to arbitrary systems is discussed and it is pointed out that the calculation of difficult integrals can be avoided without a significant loss in accuracy.     

Optisch aktive aromatische Spirane, 18. Mitt.: Darstellung von optisch aktiven 4,4′-disubstituierten 2,2′-Spirobi-s-hydrindacenen

Summary All optically active title compounds were obtained from the 4,4-diacetyl-spiro compound2; (+)- and (–)-2 were accessible by chromatography on triacetyl cellulose in ethanol. The enantiomeric purities were established from chromatographic data. The chirality (–)-(2R) was deduced for all new compounds on the basis of the CD spectra of (–)-2 and (–)-2,2-spirobi-(5,6,7,8-tetrahydrobenzo[f]indane). From the molar rotations of these 4,4-disubstituted 2,2-spirobiindanes (empirical) ligand parameters were determined (using the so-called shortened approach). Generally, the values of in these compounds are higher than those of the analogous tetrahydrobenzoindane derivatives.

Herrn Prof. Dr.F. Sauter mit besten Wünschen zum 65. Geburtstag gewidmet     

Simple and Sensitive Assay for Nucleic Acids Using their Quenching Effect on the Chemiluminescence Reaction Between Luminol and Hydrogen Peroxide with Manganese-Tetrasulfonatophthalocyanine as a New Catalyst

The manganese-tetrasulfonatophthalo-cyanine (MnTSPc) catalyzed luminol-hydrogen peroxide chemiluminescence (CL) system can be quenched in the presence of nucleic acids. A new and highly sensitive CL quenching method for determining nucleic acids in aqueous solutions has been developed. Under optimum conditions, linear relationships were found between the quenched intensity of CL and the concentration of nucleic acids in the range 0.10–2.0µgmL^–1 for calf thymus DNA and 0–1.6µgmL^–1 for fish sperm DNA. The limits of detection were 14.8ngmL^–1 for calf thymus DNA and 21.7ngmL^–1 for fish sperm DNA. The relative standard deviation (RSD) of nine replicate measurements is 1.4% for 1.0µgmL^–1 calf thymus DNA. The method was applied to the analysis of nucleic acids in synthetic samples and the results are satisfactory.Received December 2, 2002; accepted June 2, 2003 published online September 1, 2003     

Spectrophotometric determination of nitrite in environmental waters using column preconcentration on biphenyl

Column preconcentration methods have been established for the spectrophotometric determination of trace nitrite with sulfanilic acid (SA) orp-aminoacetophenone (AAP) as the diazotizable aromatic amine andN, N-dimethylaniline (DMA) or 1-aminonaphthalene (AN) as the coupling agent, using differention-pairs co-precipitated with biphenyl. Nitrite ion reacts with SA in the pH range 2.0–3.0 and AAP in the pH range 1.7–3.0 in HCl medium to form water-soluble colourless diazonium cations. These cations are subsequently coupled with DMA in the pH range 3.7–6.1 for the SA-DMA system and AN in the pH range 1.7–2.3 for the AAP-AN system to be retained on microcrystalline biphenyl packed in a column. The solid mass is dissolved out from the column with 5 ml of DMF and the absorbance is measured by a spectrophotometer at 420 nm for the SA-DMA system and at 517 nm for the AAP-AN system. The calibration was linear over the concentration ranges 0.3–6.0 g of nitrite in 5 ml of DMF solution (i.e., 0.02–0.40 g/ml in the sample solution) for the SA-DMA system and 0.5–7.0 g of nitrite in 5 ml of DMF solution (i.e., 0.03–0.47 g/ml in the sample solution) for the AAP-AN system. The molar absorptivity and Sandell's sensitivity were respectively 2.63 × 10⁴lmol^–1cm^–1 and 1.75 × 10^–3 g cm^–2 for SA-DMA and 3.28 × 10⁴lmol^–1 cm^–1 and 1.40 × 10^–3 g cm^–2 for AAP-AN. The concentration factors were 4 and 16 for SA-DMA and AAP-AN, respectively. The detection limits were 0.0138 and 0.0175 g/ml NO₂ ^– for SA-DMA and AAP-AN, respectively. Seven replicate determinations of a solution containing 3.5 g of nitrite gave mean absorbances of 0.410 and 0.500 with relative standard deviations of 0.51 and 0.55% for SA-DMA and AAP-AN, respectively. Interference from various foreign ions has been studied and the methods have been applied to the determination of nitrite in environmental samples.     

Flow injection chemiluminescence determination of l-cysteine in amino acid mixture and human urine with the BrO3 −–quinine system

In this paper, a novel flow injection chemiluminescence (CL) determination of l-cysteine is proposed. The method is based on the CL reaction of l-cysteine and KBrO₃ in acidic medium. The CL intensity was greatly enhanced in the presence of quinine. The CL intensity was linear with l-cysteine concentration in the range of 0.2–80 g L^–1, and the detection limit was 0.1 g L^–1 (3). A complete analysis, including sampling and injecting, could be performed in 1 min, giving a throughput of about 60 h^–1. The relative standard deviation was 1.6% for 0.8 g L^–1 l-cysteine (n=11). The proposed method was satisfactorily applied to the determination of cysteine in an amino acid mixture and human urine. The mechanism of the CL reaction is also discussed.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

Equilibrium Particle Distribution in the Disperse System with Coagulation and Aggregate Disintegration

Kinetic equations were formulated, which describe coagulation–fragmentation process in a low concentrated suspension flow at a low shear rate. In such a system dispersed phase divided into fine and coarse fractions as the system is brought to equilibrium. Kinetic equations of two-fraction model were formulated. An approximate solution and, in one particular case, the exact solution of these equations were obtained for the equilibrium state. Detailed analysis of equilibrium particle distribution over the mass m was performed for an exponential coagulation kernel = ₀ m and an degenerated disintegration kernel = ₁₂, in which the disintegration frequency is an exponential function of aggregate mass ₁ = ₀ m ⁺ , and the probability of the fragment detachment from an aggregate is independent ofm and decreases exponentially with an increase in mass of a fragment: ₂ = ₀ ^–1exp(–/₀). The equilibrium distribution was shown to exist only at > 0, and in particular, it is described at = = 1 by the f() = ₀₀ ^–1exp(–/₀) and F(m) = Cx ^–1(x + 1)^{2 – 1} e ^–x functions for the particles of fine and coarse fractions (x = m/m ₀, = m ₀/₀, m ₀ and ₀ are the characteristic masses of coarse and fine fractions, respectively). The particle distribution for the fine fraction at 1 is well approximated by the Gaussian distribution exp[–(m – m ₀)²/(4^–1 m ₀₀)].     

Theoretical studies of [n]paracyclophanes and their valence isomers

Summary The valence isomerisations of benzene, [6]- and [7]paracyclophane to their Dewar benzene and prismane isomers are studied with the MNDO method using the unrestricted Hartree-Fock (UHF) and the configuration interaction (C.I.) approximations. The enthalpy of the reaction Dewar benzene benzene is H° _r =–68.9 kcal/mol and the activation enthalpy is H°=27.9 kcal/mol (with C.I.). The reaction path hasC _2v symmetry.The determination of several points of the lowest potential energy surface of [6]- and [7]paracyclophanes leads to a minimum reaction path having the same topology as for the potential energy surface of the nonbridged benzene. The only difference is a quantitative change in the energy values of the aromatic isomers due to the deformation introduced by the alkyl chain. For [6]paracyclophane, the activation enthalpy is H°=24.6 kcal/mol and the activation entropy is S ⁰=0.6 cal K^–1 mol^–1 calculated with C.I.The enthalpy of the reaction prismane Dewar benzene is H° _r –32 kcal/mol and the activation enthalpy is H°19 kcal/mol. The highest molecular symmetry group common to both molecules isC _2v , whereas the symmetry group of the reaction path is lowered toC _s . Along this reaction path is located a biradicaloid intermediate, separated by low activation barriers from the products. No significant changes of the potential energy surfaces are found for the bridged [n]prismanes and the [n]Dewar benzenes.All the calculated values, reaction enthalpies, activation enthalpies and entropies, are in a good agreement with literature experimental data.This article is dedicated to Professor A. Pullman     

Direct anodic oxidation ofp-methoxytoluene in methanol. The effect of electrolysis conditions

The effect of anions of the supporting electrolyte (F^–, dialkylphosphate, TsO^–, and BF ₄ ^– and other electrolysis conditions (anode material, temperature, substrate concentration) on the selectivity of the direct anodic oxidation ofp-methoxytoluene in methanol into 4-methoxybenzaldehyde dimethylacetal was studied. The highest selectivity was obtained in the presence of fluoride anion.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 524–527, March, 1995.This work was financially supported by the Ministry of Science, High School and Technical Policy of the Russian Federation within the scope of the State scientific-technical program Ecologically harmless processes of chemistry and chemical technology (project No. 1.140 Low-tonnage chemical products) and by the International Science Foundation (Grant Ch-2-1246-0923).     

Adiabatic corrections for thei 3Π g state of the hydrogen molecule

Summary The adiabatic corrections of thei ³_g state of H₂ are calculated for a wide range of internuclear distances using an explicitly correlated wavefunction. The vibrational structure of this state is calculated in the adiabatic approximation. It is shown that forN=1 levels of the – substate, for which the nonadiabatic corrections are negligible, the agreement between theory and experiment is excellent; the small mass independent discrepancy of the order of 0.5–3 cm^–1 is due to the convergence error in the Born-Oppenheimer calculations. For higherN the discrepancy is much larger. However, it is mass andN-dependent and it is almost entirely due to the nonadiabatic effects caused by³_g-³_g interactions. The still larger discrepancy for the + substate of thei state is evidently caused by additional interactions of thei state with close-lying states of³ _g ⁺ symmetry.Dedicated to Prof. Klaus Ruedenberg on the occasion of his 70th birthday     

Kinetics and mechanism of the interaction of azide with [(H2O)(tap)2RuORu(tap)2-(H2O)]2+ ion at physiological pH

The title reaction has been studied spectrophotometrically in aqueous medium as a function of [substrate complex], [ligand], pH and temperature at constant ionic strength. At the physiological pH (7.4) the interaction with azide shows two distinct consecutive steps, i.e., it shows a non-linear dependence on the concentration of N₃ ^–; both processes are [ligand]-dependent. The rate constant for the processes are: k ₁10^–3 s^–1 and k ₂10^–5 s^–1. The activation parameters calculated from Eyring plots are: H ₁ = 14.8 ± 1 kJ mol^–1, S ₁ = –240 ± 3 J K^–1 mol^–1, H ₂ = 44.0 ± 1.5 kJ mol^–1 and S ₂ = –190 ± 4 J K^–1 mol^–1. Based on the kinetic and activation parameters an associative interchange mechanism is proposed for the interaction process. From the temperature dependence of the outersphere association equilibrium constant, the thermodynamic parameters calculated are: H ₁ ⁰ = 4.4 ± 0.9 kJ mol^–1, S ₁ ⁰ = 64 ± 3 J K^–1 mol^–1 and H ₂ ⁰ = 14.2 ± 2.9 kJ mol^–1, S ₂ ⁰ = 90 ± 9 J K^–1 mol^–1, which gives a negative G ⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex.     

Characterization of airborne particulates by laser microprobe mass analysis

Summary Laser microprobe mass analysis (LAMMA) was applied to characterize aerosol particles collected and separated from 16m to 0.06m by a low pressure cascade impactor. Positive ion LAMMA spectra showed characteristic molecular peaks such as PbCl⁺, a series of Si₂O⁺–Si₂O₄ ⁺ and NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, and TiO⁺ in 0.06–0.12m, 0.5–1m and 4–8m fraction, respectively. In the negative ion LAMMA spectra, it was observed that the fragment peaks of sulfate ions were deficient above 2m and those of nitrate ions were deficient under 2m. LAMMA allows remarkable insights into the chemical nature of aerosol particles.

---

Charakterisierung luftgetragener Teilchen durch Laser-Microprobe-Massenspektrometrie

Zusammenfassung Laser-Microprobe-Spektrometrie (LAMMS) wurde zur Analyse atmosphärischen Aerosols herangezogen, welches im Korngrößenbereich zwischen 16m und 0.06m mit einem Niederdruckkaskadenimpaktor fraktioniert gesammelt wurde. Positive LAMMS-Spektren zeigten charakteristische molekulare Peaks, wie etwa PbCl⁺, eine Serie von Si₂O⁺–Si₂O₄ ⁺ und NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, sowie TiO⁺ in der 0,06–0,12-m,- 0,5–1–m- bzw. 4–8-m-Fraktion. In den negativen LAMMS-Spektren konnten über 2m keine Fragmentpeaks für Sulfationen, unter 2m. keine für Nitrationen beobachtet werden. LAMMS ermöglicht eine bemerkenswerte Einsicht in die chemische Natur von Aerosolteilchen.

     

Ab initio MP2 calculations of the products of acetylene addition to HgCl2

Gas-phase reaction of acetylene with HgCl₂ resulting in -chlorovinylmercury derivatives and their interaction with Cl^– and I^– anions and KI molecule was studied by the ab initio MP2 method with the Dunning—Hay double zeta basis set and LanL pseudopotential for Hg, K, and I atoms. The reaction was shown to proceed via a -complex of acetylene and HgCl₂ (the calculated enthalpy of formation is –6.5 kcal mol^–1). According to calculations, the activation energy of formation of cis--chlorovinylmercury chloride from acetylene and HgCl₂ is 31 kcal mol^–1. Chloride and iodide anions and KI molecule are readily added to both cis- and trans-isomer of -chlorovinylmercury chloride to give stable species.     

TheT 1 state ofp-nitroaniline and related molecules: A CNDO/S study

The nature of the lowest energy triplet state (T ₁) ofp-nitroaniline (PNA), N,N-dimethyl-p-nitroaniline (DMPNA) and nitrobenzene (NB) is reexamined using the semiempirical CNDO/S-CI method with selected parameter options. The present results indicate that in the case of theunperturbed molecules the short-axis polarized * n() triplet largely localized at the acceptor end of the molecule may lie lower in energy than the triplet manifold counterpart of the intense intramolecular charge-transferD ⁺ A ^–singlet excitation. Computations suggest, however, that polar solvents strongly stabilize the PNA and DMPNA * charge-transfer triplet relative to other excitations, whereas specific solvent hydrogen-bonded interactions stabilize the * n() triplet of NB below those of * character. These assignments allow a rationalization of phosphorescence lifetime data,T _n T ₁ absorption measurements and relative photochemical behavior.