高分子固载化螯合钛酸酯的合成及酯化催化性能研究

将高分子载体聚苯乙烯二乙醇胺树脂与乙二胺钛酸二丁酯反应，制得高分子固载化螯合钛酸酯催化剂，并对其在高沸点酯的合成反应中的催化性能进行了研究，结果表明它具有良好的催化活性，易与产品酯分离，可以回收及重复使用。     

聚合物担载相转移催化剂用于三(环氧丙基)异氰尿酸酯的合成

三(环氧丙基)异氰尿酸酯(以下行称TGIC)是一种性能优良的新型环氧化合物,它作为聚醋粉末涂料的交联固化剂,具有独特的耐热、耐电弧和耐光老化的优点.目前国内外合成均采用季铵盐作催化剂,收率可达77％.但这类催化剂价格较高,且不易回收,季铵盐本身也极易吸潮分解,不易保存.为此,本文首次将非生物活性催化剂连接在聚合物载体上,制成聚合物担载相转移催化剂用于TGIC的合成.实验结果表明,其中季铵盐聚合物催化剂活性高,TGIC产率可达76.5％,聚合物聚乙二醇催化活性次     

硅胶负载的双高分子-钯催化剂的研究——Ⅰ.硅胶负载的聚[4(2)-乙烯吡啶]-聚[苯乙烯-顺丁烯二酸]-钯催化剂的合成及其催化加氢性能

合成了硅胶负载的聚(4-乙烯吡啶)或聚(2-乙烯吡啶)-聚(苯乙烯-顺丁烯二酸)-钯催化剂(P4VP-PSM-Pd/SiO_2和P2VP-PSM-Pd/SiO_2),研究了合成条件、组成等对其催化性能的影响及对丙烯酸甲酯的催化加氢性能。发现,同时含两种高分子的催化剂比只含一种高分子的催化剂具有较高的催化活性,催化剂在常温常压下对丙烯酸甲酯的氢化反应具有很高的催化活性和选择性,且能重复使用,表现出良好的稳定性。同时还研究了其它因素对催化剂性能的影响。     

新型固载化螯合钛酸酯催化合成高沸点酯的研究

新型固载化螯合钛酸酯催化合成高沸点酯的研究１）刘继红王春凤车丕智邢伯军孔祥球（哈尔滨师范大学化学系哈尔滨１５００８０）关键词固载化螯合钛酸酯催化剂高沸点酯酯化反应分类号Ｏ６４３．３２目前，固载化催化剂以其独特的功能日益受到人们的重视．均相催化剂的高分...     

硅胶负载的双高分子-钯催化剂的研究——Ⅰ.硅胶负载的聚[4(2)-乙烯吡啶]-聚[苯乙烯-顺丁烯二酸]-钯催化剂的合成及其催化加氢性能

 合成了硅胶负载的聚(4-乙烯吡啶)或聚(2-乙烯吡啶)-聚(苯乙烯-顺丁烯二酸)-钯催化剂(P4VP-PSM-Pd/SiO₂和P2VP-PSM-Pd/SiO₂),研究了合成条件、组成等对其催化性能的影响及对丙烯酸甲酯的催化加氢性能。发现,同时含两种高分子的催化剂比只含一种高分子的催化剂具有较高的催化活性,催化剂在常温常压下对丙烯酸甲酯的氢化反应具有很高的催化活性和选择性,且能重复使用,表现出良好的稳定性。同时还研究了其它因素对催化剂性能的影响。     

Nafion树脂负载的钯催化Suzuki偶联反应和Heck酰基化反应

相对于均相催化剂,高分子负载的催化剂有诸多优点,如催化剂易分离并可重复使用,后处理简便有利于连续反应[1,2].我们首先制备了3-二苯膦基-1-丙胺,然后在微波促进下与磺酰氟型Nafion-F树脂薄膜反应得到负载的含膦配体,再与烯丙基氯化钯二聚体进行配位反应得到负载在Nafion薄膜上的Pd催化剂1.该催化剂在Suzuki偶联和Heck酰基化反应中表现出非常高的催化活性,催化剂重复使用五次活性均未见明显降低(Scheme 1).     

蔗糖酯的合成研究进展

综述了蔗糖酯的合成方法及工艺的研究进展,并对其反应机理进行了阐述.蔗糖酯的合成方法主要有四种:溶剂法、微乳化法、无溶剂法以及酶催化法.溶剂法采用DMF或DMSO为溶剂,但是这两种溶剂均有毒,限制了蔗糖酯在食品等行业的应用.微乳化法采用丙二醇或水代替溶剂法所使用的有毒溶剂,并加入乳化剂,使反应体系近似为均相体系.无溶剂法则是通过在反应体系中加入乳化剂或表面活性剂等使熔融相成均一相,反应平稳.但是一般无溶剂法反应温度较高,反应不易进行,产率低,且产品质量得不到保证.酶催化合成法是一种新的生物合成方法,采用生物酶代替传统的催化剂合成蔗糖酯,该法催化活性高、反应条件温和、选择性强、产物易分离等优点.文中还对蔗糖酯粗品的纯化工艺进行了介绍.     

高分子载体Lewis酸催化剂:苯乙烯、丙烯腈共聚物-四氯化钛复合物

高分子催化剂是功能性高分子的重要组成部分,是目前催化剂研究的方向之一,近年来发展很快。我们曾将在空气中强烈水解的Lewis酸四氯化钛与聚苯乙烯反应制备了一种比较稳定的复合物,它对酯化、缩醛、缩酮等有机反应具有良好的催化效能,也可作为α-甲基苯乙烯正离子聚合的有效催化剂,在室温下即可获得高分子量的聚合物。为了进一步改进其稳定性和重复使用性能,本文合成了一种苯乙烯与丙烯脂的共聚交联小球,然后与四氯化钦反应制成了一种更加稳定的高分子载体Lewis酸催化剂,它不但对醋化、缩醛、缩酮等有机反应有很高的催化活性,而且重复使用性能大为改善,是一种很有希望应用于实际的高分子催化剂。     

用HZSM-5沸石催化剂合成丙酸酯的研究

迄今为止,工业上生产羧酸酯主要采用以浓硫酸作催化剂的均相酯化反应法,然而此法存在腐蚀设备、后处理工序复杂等缺点.ZSM-5沸石具有独特的晶体结构和优良的物化性能,是许多有机催化反应的理想催化剂.文献[1]报道了用HZSM-5沸石作催化剂合成乙酸乙酯,我们在常压液-固相酯化反应中用自制的ZSM-5沸石催化合成了一系列丙酸酯,该催化剂具有良好的催化活性、选择性和稳定性.     

以高分子为载体的Lewis酸催化剂——苯乙烯、甲基丙烯酸甲酯共聚物-四氯化钛复合物的制备及其在有机合成中的应用

均相催化剂的固载化和以高分子材料作为催化剂载体的研究及开发,近年来受到人们的的重视。Neckers和Sket等曾将极易水解的AlCl_3和BF_3分别与聚苯乙烯反应制成高分子载体催化剂,应用于缩醛、缩酮、酯化等反应,具有良好的催化效能。本文将在空气中极易水解的Lewis酸四氯化钛与苯乙烯和甲基丙烯酸甲酯的共聚物小球反应,制成了一种十分稳定的高分子载体Lewis酸催化剂,证明它对酯化、缩醛、缩酮等反应有较高的催化活性,并可重复使用、回收再生。由于它制备简单、操作方便、易于从反应体系中分离、无污染,因此具有良好的应用前景。     

由钛酸盐纳米带水热制备锐钛矿型TiO2纳米带

研究了水热处理具有层状结构的钛酸钠纳米带或钛酸纳米带转化为锐钛矿型TiO₂的制备过程、难易程度和相转化机理. 实验结果表明, 当水热反应温度和时间分别在160 ℃ 和24 h以内, 钛酸钠纳米带很难完全转化为锐钛矿型TiO₂, 若升高反应温度并延长反应时间, 则可制得纯的锐钛矿型TiO₂, 但纳米带形貌被严重破坏; 当水热反应温度和时间分别为160 ℃ 和16 h时, 1次酸洗的钛酸纳米带能够完全转化为锐钛矿型TiO₂, 若钛酸纳米带经过3次强酸浸泡, 则在160 ℃下相转化时间就会缩短到12 h, 所有钛酸纳米带在转化为TiO₂后的形貌仍为纳米带, 但经3次酸浸后生成的TiO₂纳米带表面更光滑. 讨论了钛酸钠纳米带或钛酸纳米带转化为锐钛矿型TiO₂的相转化机理.     

One-pot, high-yield synthesis of titanate nanotube bundles decorated by Pd (Au) clusters for stable electrooxidation of methanol

Titanate nanotube bundles assembled by several simple nanotubes were synthesized through a simple reaction between TiO₂ crystallites and highly concentrated NaOH in the presence of Au or Pd sols. Due to the unique scrolling growth mechanism of titanate nanotubes (TNTs), Au or Pd clusters were encapsulated in situ by TNTs, and titanate/Au and titanate/Pd nanotube bundles were formed. In comparison with carbon nanotubes (CNTs) or active carbon that was widely used as carriers to support metal clusters, TNTs bundles can immobilize the metal clusters tightly and overcome the shortcoming of exfoliation of metal clusters from the carriers. The as-prepared titanate/metal hybrids possess mesoporosity and high surface area. The electrochemical oxidation of methanol demonstrates that titanate/Pd hybrids exhibit high electrocatalytic activity and excellent stability, and hence they should be ideal catalyst candidates in direct methanol fuel cells (DMFCs).     

卟啉敏化的钛酸盐纳米管的可见光催化活性

制备了四碘化5,10,15,20-四(对-N,N,N三甲基苯胺基)卟啉敏化的钛酸盐纳米管(TAPPI-TNTs),并利用甲基橙(MO)作为模型污染物考察了其可见光催化活性。结果表明,TAPPI-TNTs是一个高效的可见光催化剂,在其催化作用下,可见光照射1 h后,甲基橙的降解率为89%。与此相反,纯钛酸盐纳米管并不具有可见光催化活性。此外,TAPPI-TNTs的稳定性较高,可以多次循环使用,在第五次循环中,甲基橙的降解率仍可达到50%以上。这可能是由于带正电荷的卟啉与带负电荷的钛酸盐纳米管之间存在着较强的静电吸引作用,卟啉紧密地吸附在钛酸盐纳米管上,导致卟啉的光激发电子易于向钛酸盐纳米管转移,从而使钛酸盐纳米管得到了有效敏化。     

钛金属表面结构可控多层钛酸盐纳米管薄膜的制备和结构稳定性

在水热条件下, 通过控制反应温度和氢氧化钠的浓度, 在钛金属表面得到结构可控的多层钛酸盐纳米管薄膜. 根据扫描电子显微镜和高倍透射电子显微镜的观测结果, 认为钛金属表面多层钛酸盐纳米管薄膜的形成经历以下4个阶段: (1) 钛金属的水合和碱性钛酸盐水凝胶的生成; (2) 碱性钛酸盐水凝胶分解并形成层状Na₂Ti₃O₇; (3) 层状Na₂Ti₃O₇的生长; (4) 层状Na₂Ti₃O₇的劈裂和多层卷曲成轴形成纳米管. 研究了薄膜形成后机械处理对薄膜形貌和结构稳定性的影响, 并利用超声的方法实现了多层膜的层分离.     

Influence of isopropyl tris(dioctylphosphoryloxy) titanate for flame-retardant TPU based on oyster shell powder

The flammability and droplet properties of thermoplastic polyurethane (TPU) have limited its wide application in many fields. In this article, isopropyl tris(dioctylphosphoryloxy) titanate was selected as synergism and compatilizer with oyster shell powder as flame retardant in TPU composites. And the influence of isopropyl tris(dioctylphosphoryloxy) titanate for flame-retardant TPU composites has been intensively investigated using the smoke density test, the cone calorimeter test, and the thermogravimetric analysis/infrared spectrometry, respectively. The test results show that isopropyl tris(dioctylphosphoryloxy) titanate can reduce the smoke production and heat release. And the total smoke production was reduced by 32% when the mass fraction of isopropyl tris(dioctylphosphoryloxy) titanate was 0.1%. The above results indicate that isopropyl tris(dioctylphosphoryloxy) titanate has a good application prospect in reducing the risk of TPU combustion.

     

Pyroelectricity and dielectric anisotropy in polarized and niobium modified barium titanate ceramics

The effect of time of soaking on bulk density and dielectric constant has been measured on pure and niobium-doped barium titanate pyroelectric specimens. The temperature dependence of the dielectric constant for both pure and niobium-doped barium titanate samples has been investigated before and after poling. The percentage dielectric anisotropy and ferroelectricity was also calculated for various pure and modified barium titanate pyroelectric materials. Our results can be explained in terms of the redistribution of the barium titanate lattice in a different crystallographic orientation, polarization, as well as the existence of lattice imperfection accompanying temperature, poling and niobium doping. The obtained results were in good conformity, and correlated with the increased proportion of the remnant 90° domains (induced electrically charged vacancies as a result of Nb³⁺ substitution of Ti⁴⁺ in octahedral lattice sites). It was concluded that poling of Nb-doped barium titanate samples produces the best quality ceramic pyroelectrics.     

Nanotube formation from a sodium titanate powder via low-temperature acid treatment

Through structure-monitoring of nanotube formation from a lamellar sodium titanate, the present work explicitly elucidated the structure of the titanate nanotubes obtained from hydrothermal treatment of TiO(2) with NaOH. A new compound of an orthorhombic lepidocrocite-type sodium titanate was synthesized from calcination of a solid-state mixture of TiO(2) anatase and Na(2)CO(3) powders followed by hydrothermal treatment with NaOH. By treating with acid at 25 degrees C for Na(+) exchange with H(3)O(+), the titanate compound exfoliated and then proceeded with sheet-scrolling to form nanotubes, which had a structure and morphology very close to those of the nanotubes derived from NaOH treatment on TiO(2). During the low-temperature acid treatment, the lepidocrocite-type titanate is transformed from the orthorhombic C-base-centered symmetry to the body-centered symmetry. This transformation, accompanied by a size-contraction of TiO(6)-octahedron units, was critical for the formation of nanotubes. The present work provides direct evidence, for the first time, that the widely reported TiO(2)-derived titanate nanotubes can be obtained at low temperatures by scrolling the sheets exfoliated from the orthorhombic lepidocrocite-type titanate.     

STUDY ON APPLICATION OF POTASSIUM TITANATE WHISKER MATERIALS IN PREPARATION OF PHOTOCATALYST

The K2Ti4O9 whiskers were chosen for the catalyst carrier, TiO2/potassium titanate photocatalyst was prepared by Sol-gel method The product was characterated by X-ray diffraction and SEM. EDS shows that, the main peck included Ti, O, and K in potassium titanate whisker. The main peak of K disappeared and the peaks of Ti, O stayed after whisker was covered It directed that the surface of sample was covered by TiO2. XRD shows that diffraction peak appeared, which was corresponded to the peak of anatase TiO2. In the reaction device of photochemistry, using middle-pressure mercury lamp as illumination, rhodamine B as simulant pollutant, the photocatalytic performance of TiO2/potassium titanate was studied. Under the same conditions, the lower pH, the larger illuminance, the higher temperature, the greater aeration quantum and the lower initial concentration of rhodamine B, the higher decoloration rate was got. Under our experiment conditions： pH 6, the illuminance of 250W, the temperature of 313K, and the aeration quantum of 2.0L/min. When the concentration of rhodamine B was 8mg/L The photocatalyst of TiO2/potassium titanate was 0.01g/L. The decoloration rate of TiO2/potassium titanate dealt with the rhodamine B reach over 95% in 160min, and compare with TiO2, the decoloration rate of rhodamine B was improved 0.50-1.91 multiple. TiO2/potassium titanate can be used to treatment of dye wastewater.     

The electrical properties of chemically obtained barium titanate improved by attrition milling

Barium titanate ceramics were prepared using the nanopowder resulting from a polymeric precursor method, a type of modified Pechini process. The obtained nanopowder was observed to agglomerate and in order to de-agglomerate the powder and enhance the properties of the barium titanate the material was attrition milled. The impact of this attrition milling on the electrical properties of the barium titanate was analysed. The temperature dependence of the relative dielectric permittivity showed three structural phase transitions that are characteristic for ferroelectric barium titanate ceramics. The relative dielectric permittivity at the Curie temperature was higher for the attrition-treated sample than for the non-treated barium titanate. The dielectric losses were below 0.04 in both barium titanate ceramics. The grain and grain-boundary contributions to the total resistivity were observed using impedance analyses for both ceramics. A well-defined ferroelectric hysteresis loop and piezoelectric coefficient d₃₃ = 150 pC/N were obtained for the ceramics prepared from the de-agglomerated powder. In this way we were able to demonstrate that by attrition milling of chemically obtained powders the ferroelectric and piezoelectric properties of the ceramics could be enhanced.     

Ageing and fatigue of lead titanate and lead zirconate titanate thin ferroelectric films

The phenomena of ageing and fatigue have been experimentally investigated in lead titanate and lead zirconate titanate thin ferroelectric films for samples on different substrates and with different materials of the measuring electrodes. A certain broadening of the dielectric permittivity peak is observed for the films on the silicon substrate after a year keeping without external actions. The lead titanate films on corundum substrates did not demonstrate visible changes in structural and dielectric parameters in the course of this time. In the course of repeated cycling the reduction of switching polarization in the lead titanate and lead zirconate titanate films on silicon substrates takes place at considerably greater number of cycles as compared to the same films on corundum substrates under the identical conditions. The above changes of dielectric and switching characteristics can be relevant to the changes in the domain structure of the materials under investigation in the process of their ageing and repeated switching. The reason for the acceleration of the ageing processes in the films on corundum substrates could be either an increase in the absolute magnitude of the switching field or an increase of the internal bias field, that facilitate the migration of oxygen vacancies in the films with the perovskite structure to the electrode–ferroelectric surface with the consequent fixation of domain walls.