Effect of gamma irradiation on synthesis and characterization of bio-nanocomposite SF/Ag nanoparticles

This study describes the synthesis of silver nanoparticles (AgNPs) using aqueous silk fibroin (SF) solution obtained from Bombyx mori silk under gamma radiation environment. The obtained AgNPs were characterized using UV–visible (UV–Vis) spectroscopy, X-ray diffraction (XRD) measurements, dynamic light scattering experiment (DLS) and transmission electron microscope (TEM) images. The UV–Vis absorption spectra of the samples confirmed the formation of AgNPs by showing surface plasmon resonance (SPR) band in the range of (= 428–435?nm. The XRD study revealed metal silver with the face-centered cubic (FCC) crystal structure. DLS measurements showed the dose-dependent average size of the AgNPs. TEM images showed formed AgNPs are nearly spherical in shape with smooth edges. From this study, it was found that the increasing radiation dose increases the rate of reduction and decreases the particle size. The size of the AgNPs can be tuned by controlling the radiation dose.     

Quantification of DNT isomers by capillary liquid chromatography using at‐line SERS detection or multivariate analysis of SERS spectra of DNT isomer mixtures

With the global surge of terrorism and the increased use of bombs in terrorist attacks, national defence and security departments now demand techniques for quick and reliable analysis, in particular, for detection of toxic and explosive substances. One approach is to separate different analytes and matrix material before detection. In this work microliquid chromatography was used to separate two dinitrotoluene (DNT) isomers prior to detection via online UV–Vis spectroscopy. For identification, retention times were compared with reference samples and quantification was done by integration of UV–Vis absorption. Because UV detection is not particularly selective, Raman microscopic analysis was coupled to the liquid chromatography using a flow‐through microdispenser. Because DNT is difficult to detect with conventional Raman spectroscopy, the sensitivity was increased via surface‐enhanced Raman scattering (SERS) using silver‐quantum dots. Different analytical approaches to identify and quantify mixtures of two DNT isomers were evaluated. Good quantitative results were obtained using UV detection after microchromatographic separation (Limit of Detection: 0.11 and 0.06 for 2,4‐DNT and 2,6‐DNT). Coupling with SERS allowed for more confident differentiation between the highly structurally similar DNT isomers because of the additional spectral information provided by SERS. The application of a partial least squares algorithm also allowed direct SERS detection of DNT mixtures (root mean square error of prediction: 0.82 and 0.79 mg·L^–1 for 2,4‐DNT and 2,6‐DNT), circumventing the time‐consuming separation step completely. Copyright © 2012 John Wiley & Sons, Ltd.     

Label‐free detection of binary mixtures of proteins using surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering (SERS) spectra of five binary mixtures of proteins were studied, including mixtures of apomyoglobin (apMb) and lysozyme, insulin and lysozyme, Mb and cytochrome c (cyt c), Mb and apoMb, and cyt c and human serum albumin. For mixtures in which both proteins did not contain chromophores, the variations in the intensities of SERS signals with changes in the relative concentration of the two proteins were largely proportional to the relative concentration of the protein mixtures. Similar results were obtained for mixtures in which both the proteins contained chromophores. However, for mixtures in which one protein contained chromophores and the other did not, the SERS intensities of the protein mixtures showed a bell‐shaped variation with changes in the compositions of the mixtures. The present study provides new insights into the application of SERS spectroscopy to label‐free detection in a binary of mixture of proteins. The complexities in both SERS phenomena and protein structures should be considered in the analysis of the SERS spectra of protein mixtures. By monitoring the heme band of a protein containing a heme and the NO₃^– band of a protein without a heme, the simultaneous detection of both proteins in a binary mixture may be possible. It has also been found that the larger the size of the protein, the smaller is the SERS intensity of that protein. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation of silver nanoparticles on zinc oxide nanowires by photocatalytic reduction for use in surface‐enhanced Raman scattering measurements

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurements, the high surface area of zinc oxide nanowires (ZnO NWs) was used. ZnO NWs on silicon substrates were prepared and used as substrates for further growth of silver nanoparticles (AgNPs). Ultraviolet (UV) irradiation was used to reduce silver ions to AgNPs on the ZnO wires. With proper growth conditions for both ZnO NWs and AgNPs, the substrates exhibit SERS enhancement factors greater than 10⁶. To understand the influences of the morphologies of the ZnO NWs on the growth of AgNPs, the growing time and temperature were varied. The concentration of silver nitrate and irradiation time of UV radiation were also varied. The resulting AgNPs were probed with para‐nitrothiophenol to quantify the SERS enhancements obtained from the varying conditions. The results indicate that ZnO NWs could be grown at temperatures higher than 490 °C and higher growth temperatures result in smaller diameter of the formed ZnO NWs. Also, the morphologies of ZnO NWs did not significantly alter the SERS signals. The concentration of silver nitrate affects the SERS signals significantly and the optimal concentration was found to be in the range of 10–20 mM. With irradiation times longer than 90 s, the resulting AgNPs showed similar SERS intensities. With optimized conditions, the AgNPs/ZnO substrates are highly suitable for SERS measurements with a typical enhancement factor of higher than 10⁶. Copyright © 2010 John Wiley & Sons, Ltd.     

New SERS feature of β‐carotene: consequences for quantitative SERS analysis

While recording SERS spectra of pure β‐carotene at sub‐micromole concentrations for reference purpose, we discovered an unusual spectral response never reported before. In pre‐resonance conditions with the 532‐nm line, SERS of β‐carotene with AgNPs exhibits among the strong υ(CC) mode at 1512 cm⁻¹ unshifted from normal Raman spectrum, additional strong bands at 1649, 1575 and 1387 cm⁻¹ as well as other medium bands not observed in the Raman spectrum of the crystalline powder. Such behavior is explained in terms of selection rules relaxation upon cyclohexene terminal rings of the β‐carotene interaction with the NP surface. AFM images of the SERS system suggested dimers and trimers clustering of the nanoparticles with adsorbed β‐carotene. In light of the new SERS feature the consequences in correct interpretation of the SERS imaging from complex biosystems containing carotenoids are discussed. Relative intensity ratio of the β‐carotene band at 1512 cm⁻¹ and water against concentration allowed a reliable SERS calibration curve for 50 to 500 nmol l⁻¹ concentration range and provided quantitative SERS assessment of the carotenoid content in the sea urchin (Paracentrotus lividus) gonads extracts. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering studies of carbon nanotubes using Ag‐core Au‐shell nanoparticles

Surface‐enhanced Raman scattering from carbon nanotube bundles adsorbed with plasmon‐tunable Ag‐core Au‐shell nanoparticles (Ag@Au nps) was carried out for the first time. By utilizing nanoparticles whose plasmon resonance peak (541, 642 nm) closely matches the commonly used Raman excitation sources (532, 632.81 nm), we can observe a large enhancement in the Raman signatures of carbon nanotubes. We obtain greater enhancement in the Raman signal for the above case when compared to nanotubes adsorbed with conventional Ag, Au or other ‘off resonant’ Ag@Au nps. The power‐dependent SERS experiment on single‐walled nanotubes (SWNTs) with resonant Ag@Au nps reveals a linear behavior between the G‐band intensity and the photon flux density, which is in agreement with the vibrational pumping model of SERS. The observed enhancement by resonance matching is pronounced for carbon nanotubes and may lead to insights into understanding nanotube–nanoparticle interaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Seed‐mediated growth method for electroless deposition of AgNPs on glass substrates for use in SERS measurements

In this work, an electroless deposition method for silver nanoparticles (AgNPs) on glass substrates was developed for use in surface‐enhanced Raman scattering (SERS) measurements. To obtain evenly distributed AgNPs of suitable size on the glass substrates, a seeding procedure was utilized as a pretreatment before the electroless deposition of AgNPs. The AgNPs thus formed were affected by both the seeding and growing procedures. To optimize the procedures for preparation of SERS substrates, several factors, including reaction time, the concentration of silver ions, and the concentration of reducing agents (glucose) for seeding and growing procedures, were varied. The morphologies of the seeds and the resulting AgNPs on the glass substrates were characterized by field‐emission scanning electron microscopy (FE‐SEM) and correlated with the SERS signals from probing with para‐nitrothiophenol (pNTP). The results indicated that only the seeding time and the concentration of silver ions significantly influenced the distribution and sizes of the Ag seeds on the substrates. In the growing procedures, both the concentration of silver nitrate and the reducing agent affected the morphologies of the resulting AgNPs and, hence, the SERS signals. The substrates prepared using this newly developed method offer 2–5 times improvement of the SERS signals compared to substrates prepared without seed treatment. Also, the AgNPs prepared by this method can be easily controlled to designated sizes with even spatial and size distributions. Copyright © 2009 John Wiley & Sons, Ltd.     

Photochemical decoration of silver nanoparticles on ZnO nanowires as a three‐dimensional substrate for surface‐enhanced Raman scattering measurement

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurement, a three‐dimensional (3D) SERS substrate was prepared by the decoration of silver nanoparticles (AgNPs) on the side walls of ZnO nanowires. The prepared 3D SERS substrates provide the advantages of highly loaded density of AgNPs, with a large specific surface area to interact with analytes, and the ease for the analytes to access the surfaces of AgNPs. To prepare the substrates, ZnO nanowires were first grown on a glass plate by wet chemical method. By treating SnCl₂ on the surfaces of ZnO nanowires, Ag seeds could be formed on the side wall of the ZnO nanowires, which were further grown to a suitable size for SERS measurements via photochemical reduction. To optimize and understand the influences of the parameters used in preparation of the substrates, the reaction conditions were systematically adjusted and examined. Results indicated that AgNPs could be successfully decorated on the side wall of the ZnO nanowires only by the assistances of SnCl₂. The size and density of AgNPs were affected by both the concentration of silver nitrate and the irradiation time. With optimized condition, the prepared 3D substrates provided an enhancement factor approaching 7 orders of magnitude compared with conventional Raman intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

Nanogaps in 2D Ag‐nanocap arrays for surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering substrate of Ag–Ag nanocap arrays are prepared by depositing Ag film onto two‐dimensional (2D) polystyrene colloidal nanosphere templates. When the original colloidal arrays are used as the substrate for Ag deposition, surface‐enhanced Raman scattering (SERS) enhancements show the strong size‐dependence behaviours. When O₂‐plasma etched 2D polystyrene templates are used as the substrate for Ag deposition to form nanogaps, the gap sizes between adjacent Ag nanocaps from 5 to 20 nm generate even greater SERS enhancements. When SiO₂ coverage is deposited to isolate the Ag nanocaps from the neighbours, the SERS signals are enhanced more. The significant SERS effects are due to the coupling between Ag nanocaps controlled by the distance, which enhances the local electric‐field intensity. Copyright © 2013 John Wiley & Sons, Ltd.     

An attempt of molecular design and synthesis of 3,4′/4,3′‐disubstituted benzylideneanilines with specified UV–Vis absorption maximum wavelength

Thirty‐one samples of 3,4′/4,3′‐disubstituted benzylideneanilines (XBAY) with specified UV–Vis absorption maximum wavelength (λ_max) were designed and synthesized by applying the equation (Eqn 1 ) which was abstracted from the UV–Vis absorption maximum wavelength energy (ν_max = 1/λ_max) of 4,4′‐disubstituted benzylideneanilines. Then, the UV–Vis data (λ_max) of the designed compounds were measured in anhydrous ethanol. The predicted UV–Vis data of designed compounds are in agreement with the experimental ones, in which the mean absolute error is 2.9 nm. The results show that Eqn 1 is applicative for the prediction of UV–Vis absorption λ_max values of both 4,4′‐disubstituted benzylideneanilines and 3,4′/4,3′‐disubstituted benzylideneanilines. For a same pair of groups (X and Y), one can at least get four disubstituted benzylideneaniline compounds which have different λ_max values. It perhaps provides a convenient method to design an optical material for benzylideneaniline compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

SERS detection of red organic dyes in Ag‐agar gel

Micro‐Raman spectroscopy has been widely employed in the last few years for the study of artworks, allowing for the characterization of a high class of pictorial materials. However, the detection of organic dyes by conventional Raman spectroscopy is quite difficult, due to the high fluorescence provided by these compounds. Recently, remarkable improvements have been achieved by the introduction of the surface enhanced Raman spectroscopy (SERS) technique for the analysis of organic dyes. In the present work, a new method is presented, based on the use of a SERS probe made of agar‐agar coupled with silver nanoparticles, for a non‐destructive and minimally invasive micro‐extraction of dyes from textiles. Ag‐agar gel has been tested first on textile mock‐ups dyed with alizarin, purpurin and carminic acid. SERS measurements have been performed adopting laser light excitations at 514.5 and 785 nm of a micro‐Raman setup. Highly structured SERS band intensities have been obtained. After having verified the safety of the method by colorimetric, X‐ray fluorescence and attenuated total reflectance Fourier transform infrared techniques, a real case, a pre‐Columbian piece of textile, have been investigated by Ag‐agar gel. This cutting‐edge method offers new possibilities for a sensitive and non‐destructive analysis of fluorescent materials. Copyright © 2012 John Wiley & Sons, Ltd.     

Study of tryptophan assisted synthesis of gold nanoparticles by combining UV–Vis, fluorescence, and SERS spectroscopy

We developed a rapid and non-toxic method for the preparation of colloidal gold nanoparticles (GNPs) by using tryptophan (Trp) as reducing/stabilizing agent. We show that the temperature has a major influence on the kinetics of gold ion reduction and the crystal growth, higher temperatures favoring the synthesis of anisotropic nanoparticles (triangles and hexagons). The as-synthesized nanostructures were characterized by UV–Vis absorption spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), fluorescence, and surface-enhanced Raman scattering (SERS) spectroscopy. The UV–Vis measurements confirmed that temperature is a critical factor in the synthesis process, having a major effect on the shape of the synthesized GNPs. Moreover, fluorescence spectroscopy was able to monitor the quenching of the Trp fluorescence during the in situ synthesis of GNPs. Using Trp as molecular analyte to evaluate the SERS efficiency of as-prepared GNPs at different temperatures, we demonstrated that the Raman enhancement of the synthesized gold nanoplates is higher than that of the gold spherical nanoparticles.     

Quick detection of contaminants leaching from polypropylene centrifuge tubes with surface‐enhanced Raman spectroscopy and ultraviolet absorption spectroscopy

Anomalous surface‐enhanced Raman scattering (SERS) peaks were identified for liquid sample stored in polypropylene (PP) centrifuge tubes for months. We observed unexpected Raman peaks during experiments with thiamine hydrochloride aqueous solutions stored in PP tubes for 2 months. In order to identify the contaminants, we have performed SERS experiments on deionized (DI) water stored in PP centrifuge tubes for 2 months and compared them with those from fresh DI water sample. We have also carried out ultraviolet (UV) absorption spectra for both fresh and contaminated water. We believe that the water is contaminated because of chemicals leaching from the PP tube. From the gas chromatography‐mass spectrometry data, the main contaminants were found to be phthalic acid (PA) and its derivatives. Further SERS and UV absorption experiment for PA correlated well with the anomalous peaks identified earlier. We qualitatively confirmed the identification and quantitatively estimated the concentration of the suspect contaminants as between 1 and 10 µM with both SERS and UV absorption spectroscopy. With UV absorption spectroscopy, we precisely estimated the concentration as 2.1 µM . We have shown that the sample in PP tube can be contaminated by the leaching chemicals upon long‐term storage, and suggest SERS and UV absorption spectroscopy as two quick and simple techniques to detect the contamination. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of uniform substrate based on silver nanoparticles decorated glycidyl methacrylate‐ethylene dimethacrylate porous material for ultrasensitive surface‐enhanced Raman scattering detection

Surface‐enhanced Raman scattering (SERS) in practical application and theoretical research mostly depends on the performance of the SERS substrate. In this study, a new SERS substrate which is based on inverted self‐assembly of Ag nanoparticles (AgNPs) on glycidyl methacrylate‐ethylene dimethacrylate (GMA‐EDMA) porous material is developed. The characterization results show the GMA‐EDMA material with intertwined pores may contribute to the distribution of the AgNPs to fabricate an ideal substrate for SERS detection. In view of the characteristics of porous material, an inverted assembly method is proposed and used in operation to avoid the adverse gravity effect which may make the AgNPs plug up the pore channel and distribute on the surface unevenly. By the inverted self‐assembly method, the AgNPs could uniformly distribute on the surface of the material stably. The prepared substrate presents ultrasensitivity and good reproducibility for SERS detection. The enhancement factor of rhodamine 6G (R6G) detection is approximately 10¹⁴ and the relative standard deviation of each characteristic peak is about 15% when the substrate is used. The substrate also shows a good performance in detecting paraquat and thymine. The ultrasensitive SERS substrate can be readily integrated into pesticide detection systems and biological sample analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

激光刻蚀银胶的制备及其SERS应用

激光刻蚀技术制备金属胶体是一种新兴的表面增强拉曼散射(SERS)活性衬底制备方法,本文利用激光刻蚀技术制备了'化学纯'银胶,并通过透射电镜、吸收光谱、表面增强拉曼散射光谱等手段对其进行研究,结果表明:银胶的等离子体共振吸收峰位于396nm;银粒子分布比较均匀,多数为球形颗粒,颗粒大小在20nm左右,并且有很好的分散性;吡啶的SERS谱分析显示此银胶具有很好的增强效果。     

Stability of benzoporphyrin photosensitizers in water/ethanol mixtures: pKa determination and self‐aggregation processes

Benzoporphyrin monoacid derivatives, here named B3A and B3B, are promising new drugs for photodynamic therapy. Although both isomers show interesting characteristics as photosensitizing compounds, they have some distinct physicochemical properties such as the tendency to self‐aggregate in water‐rich media. Because pH drives the presence of each species, the pK_a of these compounds assumes strategic importance. However, traditional micro‐titration methods and UV–Vis absorption techniques fail to give reliable pK_a values due to the characteristics of this highly complex system, such as the precipitation of hydrophobic species, close pK_a values, and high absorption band superposition. In the present work, chemometric tools are employed to evaluate pK_a, and the kinetic tendency of monomers to undergo self‐aggregation is investigated. In solvent mixtures at low water percentage in ethanol, both B3A and B3B are stabilized in a monomeric state. However, in mixtures with a high water content, self‐aggregation takes place, mainly under a mild pH acid condition (3 < pH < 6), in which the prevalent protolytic species of both isomers is the neutral charged form, compounds with carboxylic and porphyrin free‐base groups. It is demonstrated that both isomers can undergo aggregation following a self‐catalytic mechanism, which is 2000 times slower to B3A than B3B. For B3A, the aggregation is manifested by a decrease in the monomer band with the aggregation band probably superposed to that of the monomer. For B3B, together with the decrease in the monomer band, a new band related to self‐aggregates is observed. Copyright © 2010 John Wiley & Sons, Ltd.     

Nanoporous Ag–GaN thin films prepared by metal‐assisted electroless etching and deposition as three‐dimensional substrates for surface‐enhanced Raman scattering

Three‐dimensional (3D) nanoporous gallium nitride (PGaN) scaffolds are fabricated by Pt‐assisted electroless hydrofluoric acid (HF) etching of crystalline GaN followed by in situ electroless deposition of Ag nanostructures onto the interior surfaces of the nanopores, yielding a large surface area substrate for surface‐enhanced Raman scattering (SERS). The resulting 3D SERS‐active substrates have been optimized by varying reaction parameters and starting material concentration, exhibiting enhanced Raman signals 10–100× more intense than either (1) sputtered Ag‐coated porous GaN or (2) Ag‐coated planar GaN. The increase in SERS signal is attributed to a combination of the large surface area and the inherent transparency of PGaN in the visible spectral region. Overall, Ag‐decorated PGaN is a promising platform for high sensitivity SERS detection and chemical analysis, particularly for reaction and metabolic products that can be trapped inside the highly anisotropic nanoscale pores of PGaN. The potential of this sampling mode is illustrated by the ability to acquire Raman spectra of adenine down to 5 fmol. Additionally, correlated SERS and laser desorption/ionization mass spectrometry spectra can be acquired from same sample spot without further preparation, opening new possibilities for the investigation of surface‐bound molecules with substantially enhanced information content. Copyright © 2012 John Wiley & Sons, Ltd.     

Clean and reproducible SERS substrates for high sensitive detection by solid phase synthesis and fabrication of Ag‐coated Fe3O4 microspheres

The solid‐phase synthesis of Ag‐coated Fe₃O₄ microsphere was elaborated under argon atmosphere. This straightforward process utilized neither reducing agents nor electric current and involved the dry mixing of a precursor of CH₃COOAg with Fe₃O₄ microspheres followed by heating in an inert atmosphere. Ag nanoparticles with diameters of 30–50 nm were well‐decorated on the surfaces of Fe₃O₄ microspheres. The as‐synthesized Ag‐coated Fe₃O₄ microspheres were assembled into a surface‐enhanced Raman scattering (SERS) substrate holding clean and reproducible properties under an externally exerted magnetic force. Using these nanoprobes, analyte molecules can be easily captured, magnetically concentrated, and analyzed by SERS. This clean SERS substrate was used to detect 4‐aminothiophenol, even at a concentration as low as1.0 × 10^–12 M. In particular, the Ag‐coated Fe₃O₄ microspheres, acting as reproducible SERS substrates, were applied to detect methyl‐parathion and 4‐mercaptopyridine. Strong SERS signals were obtained with the analytes at a concentration of 1.0 × 10^–6 M. The unique, clean, and reproducible properties indicate a new route in eliminating the single‐use problem of traditional SERS substrates and show promising applications for detecting other organic pollutants. Similarly, this work may provide a new model system to a series of metal–Fe₃O₄ decorating reactions for a reproducible utilization. Copyright © 2012 John Wiley & Sons, Ltd.     

季铵盐表面活性剂溶液中阴离子偶氮染料的光谱研究

通过紫外-可见光谱法研究了阴离子偶氮染料甲基橙(MO)与3种季铵盐表面活性剂之间的相互作用.当表面活性剂浓度远低于临界胶束浓度(CMC)时,表面活性剂与染料形成聚集体,反映为吸收带蓝移并伴随着吸收强度下降.继续加入表面活性剂,引起染料在阳离子胶束中的特征吸收.当表面活性剂浓度达到CMC及以上时,混合溶液的λ<,max>...     

Protein adsorption drastically reduces surface‐enhanced Raman signal of dye molecules

There is an increasing interest in developing surface enhancement Raman spectroscopy methods for intracellular biomolecule and for in vitro protein detection that involve dye or protein–dye conjugates. In this work, we have demonstrated that protein adsorption on silver nanoparticle (AgNP) can significantly attenuate the surface‐enhanced Raman spectroscopy (SERS) signal of dye molecules in both protein/dye mixtures and protein/dye conjugates. SERS spectra of 12 protein/dye mixtures were acquired using 4 proteins [bovine serum albumin (BSA), lysozyme, trypsin, and concanavalin A] and three dyes [Rhodamine 6G, adenine, and fluorescein isothiocyanate (FITC)]. Besides the protein/dye mixtures, spectra were also obtained for the free dyes and four FITC‐conjugated proteins. While no SERS signal was observed in protein/FITC mixtures or conjugates, a significantly reduced SERS intensity (up to 3 orders of magnitude) was observed for both R6G and adenine in their respective protein mixtures. Quantitative estimation of the number of dye molecules absorbed onto AgNP implied that the degree of R6G SERS signal reduction in the R6G/BSA sample is 2 to 3 orders of magnitude higher than what could be accounted for by the difference in the amount of the absorbed dyes. This finding has significant implications for both intracellular SERS analyses and in vitro protein detection using SERS tagging strategies that rely on Raman dyes as reporter molecules. Copyright © 2009 John Wiley & Sons, Ltd.