钌催化降冰片烯开环移位聚合的研究

CpRuCl(PPh~3)~2/O~2和CH~3OCH~2CH~2CpRuCl(PPh~3)~2/O~2体系对降冰片(NBE)开环移位聚合(ROMP)有活性,降冰片烯的转化率和聚降冰片烯主链双键顺反比与气氛催化剂摩尔比及催化剂本身性质有关。在实验的基础上提出了钌催化降冰片烯开环移位聚合的可能机理。     

双吡唑亚胺镍/甲基铝氧烷催化降冰片烯的聚合

合成了两种双吡唑亚胺镍配合物: 双-N-(苯基-1-3,5-二甲基吡唑基亚甲基)苯基亚胺二溴化镍(Cat.1)和双-4-甲氧基-N-(苯基-1-3,5-二甲基吡唑基亚甲基)苯基亚胺二溴化镍(Cat.2). 研究了Cat.1/MAO和Cat.2/MAO催化体系对降冰片烯(NBE)单体聚合的催化性能, 考察了各种聚合条件, 如温度、Al/Ni摩尔比及催化剂浓度对降冰片烯的催化效率、单体转化率、聚合物分子量及分子量分布的影响. 研究结果表明, Cat.1/MAO和Cat.2/MAO催化体系对降冰片烯聚合具有较高的催化效率, 可达到105 g PNBE/(mol Ni)数量级, 所得聚降冰片烯(PNBE)的重均分子量在105以上, 分子量分布指数在2左右. 聚合产物的1H NMR和FTIR谱分析结果表明, 该聚合反应是以单体的乙烯基加成聚合机理进行的.     

新一代高活性后过渡金属烯烃聚合催化剂

介绍了近几年发展起来的新一代后期过渡金属(Fe,Co,Ni,Pd)烯烃聚合催化剂,对催化剂的结构、性能及催化烯烃聚合进行了阐述。     

邻-酚羟基取代N-杂环卡宾[C,O]螯合双配体镍/MAO催化降冰片烯加成聚合的研究

3种邻-酚羟基取代的N-杂环卡宾[C,O]螯合双配体镍配合物在甲苯中以甲基铝氧烷(MAO)为助催化剂,催化降冰片烯(NBE)聚合.考察了反应温度、时间、n(Al)/n(Ni)以及n(NBE)/n(Ni)等因素对催化活性和所得聚降冰片烯相对分子质量及其分布的影响.结果表明,0℃时催化体系的聚合活性可达,1.34×107gPNBE/(molNi.h);所得聚降冰片烯(PNBE)重均相对分子质量(Mw)可达2.0×106,相对分子质量分布(Mw/Mn)为3.3~1.5,热分解温度在440℃附近,且在室温下可溶于环己烷和三氯苯.通过对聚合产物FTIR,13C-NMR和WAXD分析表明,该聚合反应以烯烃加成聚合方式进行,且聚合物是非晶态结构.     

茂金属催化乙烯与降冰片烯共聚合研究

研究了茂金属催化体系Ｍｅ２ＳｉＣｐ２ＭＣｌ２／ＭＡＯ（Ｍ＝Ｚｒ，ｔｉ）催化乙烯与降冰片烯共聚合，考察了不同聚合条件下的共聚及乙烯动力学行为，对共聚物的结构进行了ＤＳＣ，１３Ｃ ＮＭＲ表征．研究表明，在相同的聚合条件下，Ｚｒ较Ｔｉ有更佳的共聚合催化性能．在相近的投料比条件下，得到了降冰片烯含量和Ｔｇ均较文献高的乙烯与降冰片烯的共聚物．     

茂钛/MAO催化体系进行降冰片烯聚合的研究

以降冰片烯为例的环状烯烃的聚合方式主要有两种 :( A) Vinyl-type polymerization;( B) Ring-Opening Polymerization　　 80年代中期以前 ,环烯烃聚合研究主要集中在开环易位聚合 (ROMP)反应 [1] .Kaminsky[2 ] 首次以[En(Ind) 2 Zr Cl2 ]/MAO等为催化剂进行降冰片烯的聚合 ,获得了熔点极高 (高于其 40 0℃的分解温度 )的大分子量加成结构的聚合物 .研究结果表明 ,具有 C2 和 Cs对称性的茂锆催化体系能高活性地得到降冰片烯加成聚合物 [3,4 ] ,但是这些由茂锆催化体系合成的降冰片烯聚合物不溶于有机溶剂 ,难以进行精确定量的结…     

钯催化芳基乙炔对氧/氮杂苯并降冰片烯开环反应研究

过渡金属催化的碳亲核试剂对氧/氮杂苯并降冰片烯的开环反应是合成氢化萘衍生物的有效方法之一. 在该类反应中, 采用末端炔烃作为碳亲核试剂在反应操作、底物适用范围等多个方面都具有已报道的各种有机金属亲核试剂所不具备的优势. 目前, 对末端炔烃与氧/氮杂苯并降冰片烯的开环反应的研究进展有限, 只有Ni(dppe)Cl₂/ZnCl₂/Zn和手性的Rh两种催化体系被应用到该类反应当中, 但都面临一些不足. 为该类反应开发简单有效的新型催化体系仍然具有重要的意义和价值. 我们通过研究发现: PdCl₂与Xantphos的配合物是芳基乙炔对氧/氮杂苯并降冰片烯亲核开环反应的有效催化剂. 在优化后的反应条件下, 该Pd催化剂具有良好的催化活性和底物适应能力, 能够实现各种取代的芳基乙炔对氧/氮杂苯并降冰片烯的亲核加成, 并以较好的收率生成目标开环产物.     

用于烯烃与(甲基)丙烯酸甲酯配位共聚的非茂后过渡催化剂研究进展

非茂后过渡金属催化剂因其良好的耐杂原子能力在催化烯烃和极性单体共聚合方面表现出很好的特性,并具有潜在的工业应用前景。本文综述了近年来Fe、Co、Ni、Pd、Cu等非茂后过渡金属催化剂催化乙烯、丙烯与(甲基)丙烯酸甲酯配位共聚的研究状况,重点介绍了Fe、Co、Ni、Pd为中心金属的非茂后过渡金属催化剂的结构对乙烯、丙烯与(甲基)丙烯酸甲酯配位共聚的催化活性和所得共聚物分子量的影响,并强调了设计新型配体是开发新型非茂后过渡金属催化剂的一种重要途径。     

降冰片烯开环易位聚合反应的分子量及分子量分布控制

使用Grubbs催化剂催化降冰片烯单体进行开环易位聚合反应, 研究了催化剂搅拌溶解时间、聚合反应的溶剂极性和三苯基膦的加入等反应条件对降冰片烯单体ROMP反应分子量及分子量分布的影响, 从而得到降冰片烯ROMP反应的最佳条件.     

可溶液加工的聚(多金属氧簇降冰片烯)和聚(己酸降冰片烯)嵌段和无规共聚物的合成及催化功能的研究

将一种可有机功能化的Wells-Dawson POM与降冰片烯相连接,制备了多金属氧簇降冰片烯单体.再利用活性可控的开环易位聚合方法(ROMP),在Grubbs 3~(rd)催化剂的作用下,合成了聚(多金属氧簇降冰片烯)-聚(己酸降冰片烯)的杂化嵌段和无规共聚物(H-CPs),分别简写为Poly(POM)_m-b-Poly(COOH)_n和Poly(POM)_m-r-Poly(COOH)_n.采用~1H-NMR、~(31)P-NMR和FTIR等方法对共聚物结构进行表征,确认我们成功地合成了由共价键连接这2种单体形成的H-CPs.最后,利用带有光散射和红外探测器的凝胶渗透色谱(SEC)测定聚合物的绝对分子量和分子量分布,证明所得到的H-CPs不仅分子量可控,而且分子量分布系数较窄.最后,研究了H-CPs催化氧化四氢噻吩(THT)成环丁亚砜(THTO)反应,结果表明,相比于聚(多金属氧簇)的均聚物(Poly(POM)),H-CPs的催化活性有所下降,原因是POM催化剂含量较低以及H-CPs在催化介质中溶解性的差异.     

后过渡金属配合物催化乙烯齐聚与聚合的研究进展

后过渡金属配合物催化乙烯齐聚和聚合研究,不仅拓展了后过渡金属配合物的应用 ,而且为探求烯烃聚合催化剂提供了新机遇,成为当前催化研究中的热点课题.本文综述了后过渡金属铁、钴、镍配合物催化乙烯齐聚和聚合的国内外最新研究进展.     

Possible side reactions due to water in emulsion polymerization by late transition metal complexes. 1. Water complexation and hydrolysis of the growing chain

The transition metal catalyzed ethylene polymerization in aqueous emulsion has been increasingly successful in the last couple of years. Water however adversely affects the polymerization process by (a) competing with ethylene for the binding site at the metal and (b) hydrolyzing the growing chain. Neutral salicylaldiminato and cationic diimine complexes of Ni and Pd with different substituent patterns are studied here by density functional theory to determine their propensity toward water complexation and hydrolysis of the growing chain. Experimental NMR studies have also been carried out on the protonolysis of the Ni(II)-based Grubbs catalyst. It is found that in general that (a) ethylene coordination is preferred over water coordination for both Ni and Pd catalysts and (b) hydrolysis of the metal alkyl bond is competitive to ethylene insertion.     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

The Vinyl Homopolymerization of Norbornene

A full literature and patent account (about 100 references) is given on work describing vinyl polymerization to form the homopolymer poly(norbornene). The interest in vinyl‐poly(norbornene) is driven by its dielectric and mechanical properties for the technical application as an interlevel dielectric in microelectronics applications. For comparison, the norbornene/olefin copolymerization is discussed also. The metal catalysts are introduced and important polymer product properties are emphasized. The six possible isomers for stereoregular poly(norbornene) are presented.     

新型Ni(Ⅱ)、Pd(Ⅱ)基后过渡金属络合物催化烯烃聚合的研究进展

综述了以α-二亚胺为配体的新型Ni(Ⅱ )、Pd(Ⅱ )后过渡金属催化剂 ,包括催化剂的组成、活化及其对烯烃均聚、共聚和与极性单体共聚的性能、聚合机理。     

Reaction of vinyl chloride with late transition metal olefin polymerization catalysts

The reactions of vinyl chloride (VC) with representative late metal, single-site olefin dimerization and polymerization catalysts have been investigated. VC coordinates more weakly than ethylene or propylene to the simple catalyst (Me(2)bipy)PdMe(+) (Me(2)bipy = 4,4'-Me(2)-2,2'-bipyridine). Insertion rates of (Me(2)bipy)Pd(Me)(olefin)(+) species vary in the order VC > ethylene > propylene. The VC complexes (Me(2)bipy)Pd(Me)(VC)(+) and (alpha-diimine)Pd(Me)(VC)(+) (alpha-diimine = (2,6-(i)Pr(2)[bond]C(6)H(3))N[double bond]CMeCMe[double bond]N(2,6-(i)Pr(2)[bond]C(6)H(3))) undergo net 1,2 VC insertion and beta-Cl elimination to yield Pd[bond]Cl species and propylene. Analogous chemistry occurs for (pyridine-bisimine)MCl(2)/MAO catalysts (M = Fe, Co; pyridine-bisimine = 2,6-[(2,6-(i)Pr(2)[bond]C(6)H(3))N[double bond]CMe](2)-pyridine) and for neutral (sal)Ni(Ph)PPh(3) and (P[bond]O)Ni(Ph)PPh(3) catalysts (sal = 2-[C(H)[double bond]N(2,6-(i)Pr(2)-C(6)H(3))]-6-Ph-phenoxide; P[bond]O = [Ph(2)PC(SO(3)Na)[double bond]C(p-tol)O]), although the initial metal alkyl VC adducts were not detected in these cases. These results show that the L(n)MCH(2)CHClR species formed by VC insertion into the active species of late metal olefin polymerization catalysts undergo rapid beta-Cl elimination which precludes VC polymerization. Termination of chain growth by beta-Cl elimination is the most significant obstacle to metal-catalyzed insertion polymerization of VC.     

后过渡金属催化烯烃可控/活性聚合的研究进展

烯烃活性聚合由于可以制备出预定分子量的窄分布聚合物,以及各种嵌段共聚物、末端功能化聚合物等而受到广泛关注.过渡金属催化的烯烃配位聚合反应活性高,催化剂性能可通过配体结构的修饰进行调节,聚合物微观结构易于调控,其活性聚合进一步拓展了对烯烃聚合物分子设计的手段,具有重要的意义.除了以钛、锆、钒等为金属中心的前过渡系催化剂之...     

Vinyl polymerization of norbornene with nickel catalysts bearing [N,N] six-membered chelate ring: Important influence of ligand structure on activity

Norbornene polymerizations with nickel complexes bearing [N,N] six-membered chelate ring activated with methylaluminoxane were investigated. The influence of ligand structure such as β-diimine, β-diketiminate, fluorinated β-diketiminate, and anilido-imine ligand on catalytic activities for norbornene polymerization was evaluated in detail. Ligands led to different electrophilicity of the nickel metal center, and a relatively positive nickel metal center would result in high catalytic activities for norbornene polymerization. The influences of polymerization temperature and Al/Ni ratio on norbornene polymerization with nickel catalysts bearing β-diimine, β-diketiminate, and fluorinated β-diketiminate ligands were also examined. All of the obtained polymers catalyzed by these nickel catalysts bearing [N,N] ligand are vinylic addition polynorbornenes with different molecular weights.     

Vinyl addition polymerization of norbornene with cationic (allyl)Ni catalysts: Mechanistic insights and characterization of first insertion products

Several cationic (allyl)Ni(II) complexes were synthesized and shown to be highly active for (2,3)‐vinyl addition polymerization of norbornene to yield polymers with low molecular weight distributions (MWDs) ranging from 1.4–1.9. In all cases slow initiation was followed by rapid propagation which prevents molecular weight control of the poly(norbornene). One of the intermediates in the polymerization process has been identified and characterized by NMR spectroscopy as the first insertion product resulting from the insertion of norbornene into the Ni? C allyl bond in cis‐exo fashion. This insertion product was synthesized independently and NMR studies showed that the first insertion of norbornene into the Ni? C allyl bond is a reversible process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2560–2573, 2009     

Monodentate aminophosphine nickel(II)‐ and palladium(II)‐catalyzed ethylene oligomerization and norbornene polymerization

Nickel(II) and palladium(II) complexes of monodentate aminophosphine ligands were prepared and characterized. In ethylene oligomerization and subsequent Friedel–Crafts alkylation of toluene, the Ni(II) complexes Ni‐1 and Ni‐2 were activated with aluminium co‐catalysts and generated tandem catalysts with high activities (up to 1.1 × 10⁶ g (mol Ni)^?1 h^?1) which are comparable with those of previously reported bidentate Ni(II) catalysts. The Pd(II) precatalyst Pd‐1 showed high activities (up to 2.0 × 10⁵ g (mol Pd)^?1 h^?1) in the polymerization of norbornene.