Width of the ferromagnetic resonance line in highly dispersed powders of crystalline and amorphous Co-P alloys

The resonance characteristics (inhomogeneous FMR linewidth ΔH) in highly dispersed (d=0.1–3 μm) powders of crystalline and amorphous Co-P alloys are investigated as a function of the composition, particle size, and atomic structure. It is established that ΔH for powders of amorphous Co-P alloys is two to three times larger than ΔH for crystalline Co-P powders. According to the investigations performed, this is caused by thermodynamically stimulated segregation of nonmagnetic Co₂P inclusions, apparently an effective relaxation channel, in the amorphous state of Co-P powders. Fiz. Tverd. Tela (St. Petersburg) 41, 464–467 (March 1999)     

Theory of sparse random matrices and vibrational spectra of amorphous solids

The random matrix theory has been used for analyzing vibrational spectra of amorphous solids. The random dynamical matrix M = AA ^T with nonnegative eigenvalues ɛ = ω² has been investigated. The matrix A is an arbitrary square (N-by-N) real sparse random matrix with n nonzero elements in each row, mean values 〈A _ij 〉 = 0, and finite variance 〈A _ij ²〉 = V ². It has been demonstrated that the density of vibrational states g(ω) of this matrix at N, n ≫ 1 is described by the Wigner quarter-circle law with the radius independent of N. For n ≪ N, this representation of the dynamical matrix M = AA ^T makes it possible in a number of cases to adequately describe the interaction of atoms in amorphous solids. The statistics of levels (eigenfrequencies) of the matrix M is adequately described by the Wigner surmise formula and indicates the repulsion of vibrational terms. The participation ratio of the vibrational modes is approximately equal to 0.2–0.3 almost over the entire range of frequencies. The conclusions are in qualitative and, frequently, quantitative agreement with the results of numerical calculations performed by molecular dynamics methods for real amorphous systems.     

Structural transformations of the cumulene form of amorphous carbyne at high pressure

Structural transformations of the cumulene form of amorphous carbyne which are induced by heating at high pressure (7.7 GPa) are investigated. These can be described by the sequence amorphous phase — crystal — amorphous phase — disordered graphite. Raman scattering shows that predominately the chain structure of carbyne remains at the first three stages. It was found that the intermediate crystalline phase is an unknown modification of carbon whose structure is identified as cubic (a=3.145 Å). A mechanism of structural transformations in carbyne that involves the formation of new covalent bonds between chains is discussed. Pis’ma Zh. éksp. Teor. Fiz. 66, No. 4, 237–242 (25 August 1997)     

Phase transformations and thermal stability of the structure of Ti<Subscript>3</Subscript>Al intermetallic compound at deuteration and plastic deformation

The structural transformations in Ti₃Al intermetallic compound at deuteration with concentrations x = 1.2 and 1.7, heating at 100–400°C, and shear deformation under pressure have been studied. It is established that at a given deuterium concentration deuterides with fcc and orthorhombic lattices are formed; under severe shear deformation, nanocrystalline and amorphous (or close to amorphous) deuterides arise. The reasons for the structure amorphization at deuteration and subsequent plastic deformation are discussed.     

Cluster Structure of Liquid Alcohols,Water, and <Emphasis Type="Italic">n</Emphasis>-Hexane

The processes of cluster formation in liquid alcohols, water, methanol, n-hexanol, and n-hexane have been investigated by the method of flicker-noise spectroscopy. Two types of clusters — clusters with a close-packed structure and clusters with a loose structure — have been detected. The energy of formation of different clusters in methanol and n-hexane ranges, respectively, from −250 to +250 J/mole and from −50 to +50 J/mole. The smallest clusters of methanol, n-hexanol, water, and n-hexane consist, respectively, of six, two, eleven, and two molecules, and their largest clusters represent oscillators consisting, respectively, of 50,400, 17,200, 93,500, and 33,150 molecules at 274 K. In methanol at 271 K, more than 44 types of clusters consisting of 6, 97, 152, 219, 297, 492, 1029, 1368, 1560, etc. molecules were detected. In n-hexanol at 273 K, 57 types of clusters were detected. Models of small clusters are proposed. In water, the content of close-packed clusters is maximum at 277 K. The energy of formation/decomposition of small clusters in water ranges from −0.4 to +0.4 kJ/mole and increases with increase in the water temperature. The hysteresis of transformation of the (H₂O)₂₈₀ cluster in the process of heating and cooling of water in the temperature range 273–280 K was detected. Series of energy spectra of clusters in liquids at different temperatures are presented and discussed. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 3, pp. 305–312, May–June, 2005.     

Laser desorption studies using laser-induced fluorescence of large aromatic molecules

Pulsed laser desorption of non-volatile organic dye molecules paraterphenyl and tetra-t-butyl-p-quinquephenyl (QUI) was studied using gas phase ultraviolet laser induced fluorescence, following heating of a steel substrate by a pulsed 1.06-μm Nd:YAG laser. The fluorescence signal intensity is linear in concentration up to at least 30 monolayers and shows infrared power threshold behavior, as expected for evaporation, at ∼0.2 J/cm². Similar signal levels were also observed in air, with 532-nm heating, and using other metallic or dark black surfaces.     

Effect of the wavelength dependence of the emissivity on inferred soot temperatures measured by spectrally resolved laser-induced incandescence

Flame-generated soot was heated using a pulsed laser, and temperatures of the irradiated soot were inferred by fitting the Planck function to spectrally resolved laser-induced incandescence with the temperature as an adjustable parameter. The effect of the wavelength dependence of the emissivity on the inferred temperatures of the irradiated soot was studied using selected expressions for the soot emissivity in the fit. Depending upon the choice of the functional form of the emissivity, the maximum temperature reached by the soot during the laser pulse was calculated to span a range of 341 K (3475–3816 K) at a 1064-nm laser fluence of 0.1 J/cm² and 456 K (4115–4571 K) at a 1064-nm laser fluence of 0.4 J/cm² with a 1σ standard deviation about the mean of ∼25 K. Comparison of the present results with temperature measurements from previous studies suggests that the emissivity may depend on flame conditions and that further investigation on the subject is needed. The use of two-color or spectrally resolved LII to infer the soot temperature during or after laser heating requires a careful characterization of the wavelength dependence of the emissivity. The spread in temperature leads to large uncertainties regarding the physico-chemical processes occurring at the surface of the soot during the laser heating.     

Effect of pressure on turnover behaviour inI–V characteristic curves in GeTeSe chalcogenide glass

Summary Thick layers of GeTeSe chalcogenide glass have been prepared and subjected to conduction measurements under the effect of both temperature and pressure. The results of theI–V characteristics exhibit transition from high-resistance state to differential negative resistance state through a turnover point. The application of uniaxial pressure shows the similar effect of temperature on that behaviour. Both current and voltage at the turnover point depend on pressure and ambient temperature. The rise of temperature in the conduction path due to joule heating and application of uniaxial pressure as well as the reduction in the energy gap width (β=2.87·10⁻¹²eV/N m⁻²) are estimated and discussed at the turnover point. This behaviour is explained according to the orientation of dipoles randomly dispersed in viscous amorphous matrix.     

Near IR laser light visualizators using nonlinear GaSe and other layered crystallites

Two methods of preparation of the devices for visualization of pulsed and continuous near-IR (near infrared) are described and the results of conversion of pulsed and continuous IR (800–1360 nm) laser radiation into the visible range of spectra (400–680 nm) by using a transparent substrate covered with the particles (including nanoparticles) of effective nonlinear materials of GaSe _x S_{1 − x} (0.2 ≤ x ≤ 0.8) are presented. Converted light can be detected in transmission or reflection geometry as a visible spot corresponding to the real size of the incident laser beam. Developed device structures can be used for checking if the laser is working or not, for optical adjustment, for visualization of distribution of laser radiation over the cross of the beam and for investigation of the content of the laser radiation. Low energy (power density) limit for visualization of the IR laser pulses with 2–3 ps duration for these device structures are: between 4.6–2.1 μJ (3 × 10⁻⁴−1 × 10⁻⁴ W/cm²) at 1200 nm; between 8.4–2.6 μJ (4.7 × 10⁻⁴−1.5 × 10⁻⁴ W/cm²) at 1300 nm; between 14.4–8.1 μJ (8.2 × 10⁻⁴–4.6 × 10⁻⁴ W/cm²) at 1360 nm. Threshold damage density is more than 10 MW/cm² at λ = 1060 nm, pulse duration τ = 35 ps. The results are compared with commercially existing laser light visualizators.     

Modeling laser irradiation conditions for mucosal tissues in antimicrobial photodynamic therapy

We use computer modeling to analzye empirically selected conditions for antimicrobial photodynamic therapy of mucosal tissues. We calculate the optical and thermal fields for experimental conditions for low-intensity (cold) laser irradiation used in treatment of lesions in mucosal tissues stained by methylene blue: λ = 670 nm, power density 150–300 mW/cm², doses 9–18 J/cm²; λ = 632.8 nm, 15 mW/cm², dose 4.5 J/cm². For numerical estimates, we used the optical characteristics of methylene blue and three layers of mucosal tissues at the laser radiation wavelengths, and also the thermal characteristics of the tissues. The experimental conditions were optimized using the ratio of the tissue penetration depth for the absorbed optical energy and the penetration depth of methylene blue into the lesion, while maintaining safe tissue heating temperatures.     

Specific features in the thermal conductivity of synthetic opals

Data on the thermal conductivity ϰ _ph of the cluster lattice of synthetic opals are analyzed. All opals are divided into two groups according to the temperature dependence of their ϰ _ph. These are opals-1, whose thermal conductivity behaves like ϰ _ph(T) of quasi-crystalline materials, and opals-2, with a ϰ _ph(T) dependence typical of classical amorphous solids. Possible reasons for this difference are considered. An attempt is made to explain the complex temperature hysteresis in ϰ _ph(T) observed earlier in opals-2. Fiz. Tverd. Tela (St. Petersburg) 39, 392–398 (February 1997)     

Effect of mixed glass formers on the crystallization kinetics in AgI–Ag<Subscript>2</Subscript>O–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–MoO<Subscript>3</Subscript> glassy superionic system

The crystallization and glass transition kinetics using differential scanning calorimetry (DSC) in 50AgI–33.33Ag₂O–16.67[(V₂O₅)_1−x –(MoO₃) _x ] superionic glassy system is discussed. Thermal stability of glass, studied using various criteria, does not vary significantly with glass former variation. However, the activation energies for structural relaxation (E _s) at glass transition temperature and crystallization (E _c) obtained using Moynihan and Kissinger, Matusita-Sakka formulations found to exhibit interesting trends with MoO₃ substitution in the glass matrix. It is noticed that the electrical conductivity (σ)–temperature (T) cycles obtained at a typical heating rate of 1 °C/min do exhibit significant thermal events. The conductivity after first heating cycle at room temperature is found to be increasing with MoO₃ content and maximum for x = 0.3 (~10⁻³ Ω⁻¹ cm⁻¹ at 30 °C) which is comparable to that of the host 50AgI–33.33Ag₂O–16.67V₂O₅ glassy system. The parameters obtained from σ–T plots and DSC scans do complement each other in a particular range of composition.     

Erbium electroluminescence excitation in amorphous hydrogenated silicon under thermally stimulated deep-center tunneling ionization

A study of the electroluminescence of erbium-doped, amorphous hydrogenated silicon, a-Si:H 〈Er〉, is reported. It has been found that the electroluminescence intensity at the wavelength λ=1.54 μm corresponding to the ⁴ I _13/2→⁴ I _15/2 intra-4f shell transition in Er passes through a maximum near room temperature. The unusual temperature and field dependences of the electroluminescence indicate electric-field induced multi-phonon tunneling emission of electrons from deep centers. The electroluminescence of Er³⁺ ions is due to their becoming excited as conduction-band electrons are captured by neutral dangling bonds (D ⁰ centers), which form when erbium is incorporated into the amorphous matrix. This Auger process transforms the center from its neutral state, D ⁰, to a negatively charged state, D ⁻, and the energy released in the capture is transferred by Coulomb interaction into the erbium-ion 4f shell. The steady-state current through the electroluminescent structure is supported by the reverse process of multi-phonon tunneling-electron emission from the D ⁻ center to the conduction band. The proposed theoretical model is in a good agreement with experimental data. Fiz. Tverd. Tela (St. Petersburg) 41, 210–217 (February 1999)     

Electrical properties of amorphous (Co45Fe45Zr10)x(Al2O3)1?x nanocomposites

The electrical properties of (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_1−x granular nanocomposites have been studied. The concentration dependences of electrical resistivity are S-shaped (in accordance with the percolation theory of conduction) with a threshold at a metallic component concentration of ∼41 at. %. An analysis of the temperature behavior carried out in the range 300–973 K revealed that structural relaxation and crystallization of the amorphous phase are accompanied by a decrease in the electrical resistivity of the composites above the percolation threshold and by its increase below the percolation threshold. For metallic phase concentrations x<41 at. %, variable range hopping conduction over localized states near the Fermi level was found to be dominant at low temperatures (77–180 K). A further increase in temperature brings about a crossover of the conduction mechanism from Mott’s law ln(σ) ∝ (1/T)^1/4 to ln(σ) ∝ (1/T)^1/2. A model of inelastic resonance tunneling over a chain of localized states of the dielectric matrix was used to find the average number of localized states involved in the charge transport between metallic grains. __________ Translated from Fizika Tverdogo Tela, Vol. 46, No. 11, 2004, pp. 2076–2082. Original Russian Text Copyright ? 2004 by Kalinin, Remizov, Sitnikov.     

Low-temperature specific heat of crystalline and amorphous Eu2(MoO4)3

The specific heat C _total of crystalline and amorphous Eu₂(MoO₄)₃ is measured in the temperature interval 4.5–30 K. The amorphous state is obtained by applying pressure ∼7 GPa at room temperature. It is found that the specific heat of the crystal at T⩽7.5 K is described by a cubic function of temperature, while the specific heat of the amorphous sample has a strongly non-Debye character in the entire experimental temperature interval. The curve of C _total for amorphous europium molybdate is analyzed in a model of soft atomic potentials, and it is shown that it agrees well with universal low-temperature anomalies of the specific heat of classical glasses obtained by quenching from the liquid. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 8, 623–627 (25 October 1998)     

Amorphization of solids by fast neutrons

The diffraction patterns of amorphous solids prepared in the traditional way and by fast neutron bombardment are systematized. It is found that the diffraction patterns of these two classes of materials are different. In the case of a single crystal of titanium nickelide we have demonstrated here for the first time that these radiation-modified solids belong to the class of amorphous materials of distortion type. Fiz. Tverd. Tela (St. Petersburg) 40, 1584–1588 (September 1998)     

Ac-conductivity and dielectric relaxations above glass transition temperature for parylene-C thin films

45% semi-crystalline parylene-C (–H₂C–C₆H₃Cl–CH₂–) _n thin films (5.8 μm) polymers have been investigated by broadband dielectric spectroscopy for temperatures above the glass transition (T _g =90°C). Good insulating properties of parylene-C were obtained until operating temperatures as high as 200°C. Thus, low-frequency conductivities from 10⁻¹⁵ to 10⁻¹² S/cm were obtained for temperatures varying from 90 to 185°C, respectively. This conductivity is at the origin of a significant increase in the dielectric constant at low frequency and at high temperature. As a consequence, Maxwell–Wagner–Sillars (MWS) polarization at the amorphous/crystalline interfaces is put in evidence with activation energy of 1.5 eV. Coupled TGA (Thermogravimetric analysis) and DTA (differential thermal analysis) revealed that the material is stable up to 400°C. This is particularly interesting to integrate this material for new applications as organic field effect transistors (OFETs). Electric conductivity measured at temperatures up to 200°C obeys to the well-known Jonscher law. The plateau observed in the low frequency part of this conductivity is temperature-dependent and follows Arrhenius behavior with activation energy of 0.97 eV (deep traps).     

Pulsed electron-beam melting of a copper — steel 316 system: Evolution of the chemical composition,microstructure, and properties

The surface topography, chemical composition, microstructure, nanohardness, and tribological characteristics of a Cu (film, 512 nm)-stainless steel 316 (substrate) system subjected to pulsed melting by a low-energy (20–30 keV), high-current electron beam (2–3 μs, 2–10 J/cm²) were investigated. The film was deposited by sputtering a Cu target in the plasma of a microwave discharge in argon. To prevent local exfoliation of the film due to cratering, the substrate was multiply pre-irradiated with 8–10 J/cm². On single irradiation, the bulk of the film survived, and a diffusion layer containing the film and substrate components was formed at the interface. The thickness of this layer was 120–170 nm irrespective of the energy density. The diffusion layer consisted of subgrains of γ-Fe solid solution and nanosized particles of copper. In the surface layer of thickness 0.5–1 μm, which included the copper film quenched from melt and the diffusion layer, the nanohardness and the wear resistance nonmonotonicly varied with energy density, reaching, respectively, a maximum and a minimum in the range 4.3–6.3 J/cm². As the number of pulsed melting cycles was increased to five in the same energy density range, there occurred mixing of the film-substrate system and a surface layer of thickness ∼2 μm was formed which contained ∼20 at. % copper. Displacement of the excess copper during crystallization resulted in the formation of two-phase nanocrystal interlayers separating the γ-phase grains. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 6–13, December, 2005.     

Phase segregation in the Fe90Zr10 amorphous alloy under heating

A study of the changes in the structure of melt-quenched Fe₉₀Zr₁₀ amorphous alloys by x-ray diffraction, Auger spectroscopy, and transmission electron microscopy is reported. The samples were subjected to isochronous (for 1 h) and isothermal anneals at 100–650 °C. It is shown that an amorphous alloy annealed for one hour at 300–500 °C crystallizes with formation of a supersaturated solid solution of Zr in α Fe and the intermetallic compound Fe₃Zr. Isothermal anneal at 100 °C for up to 7000 h produces nanocrystallites 110–30 nm in size, with fuzzy interfaces between the grains. An alloy subjected to such an anneal contains two solid solutions of Zr in Fe, having a cubic and a weakly tetragonal lattice. Crystallization taking place during low-temperature anneals is preceded by phase segregation of the alloy within the amorphous state. The lattice periods of the solid solutions have been determined. The possibility of the alloy crystallizing by spinodal decomposition during prolonged annealing is discussed. Fiz. Tverd. Tela (St. Petersburg) 40, 1769–1772 (October 1998)