Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

Boost oxygen reduction reaction performance by tuning the active sites in Fe-N-P-C catalysts

Cost-effective atomically dispersed Fe-N-P-C complex catalysts are promising to catalyze the oxygen reduction reaction(ORR)and replace Pt catalysts in fuel cells and metal-air batteries.However,it remains a challenge to increase the number of atomically dispersed active sites on these catalysts.Here we report a highly efficient impregnation-pyrolysis method to prepare effective ORR electrocatalysts with large amount of atomically dispersed Fe active sites from biomass.Two types of active catalyst centers were identified,namely atomically dispersed Fe sites and Fe_xP particles.The ORR rate of the atomically dispersed Fe sites is three orders of magnitude higher than it of Fe_xP particles.A linear correlation between the amount of the atomically dispersed Fe and the ORR activity was obtained,revealing the major contribution of the atomically dispersed Fe to the ORR activity.The number of atomically dispersed Fe increases as the Fe loading increased and reaching the maximum at 1.86 wt%Fe,resulting in the maximum ORR rate.Optimized Fe-N-P-C complex catalyst was used as the cathode catalyst in a homemade Zn-air battery and good performance of an energy density of 771 Wh kgZn^-1,a power density of 92.9 m W cm^-2 at 137 m A cm^-2 and an excellent durability were exhibited.     

氨基硅油扩链改性水性聚氨酯的研究

通过将由甲苯二异氰酸酯与聚四氢呋喃,二羟甲基丙酸反应制得的聚氨酯预聚体在低浓度氨基硅油的水乳液中扩链,合成了一种硅氧烷改性的聚氨酯水乳液,并用傅立叶红外光谱,ＥＳＣＡ能谱,接触角仪,电子拉力试验机,吸水率测定及乳液稳定性测试对其进行研究。     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

氨基硅油扩链改性水性聚氨酯的合成及性能研究

采用甲苯二异氰酸酯(TDI)、聚氧化丙烯二醇(PPG)、2,2-二羟甲基丙酸(DMPA)为原料,先制备成聚氨酯预聚体,再通过在乳化过程中以侧链氨基硅油(AEAPS)或直链氨基硅油(ATPS)扩链制得了一系列水性聚氨酯乳液,并对涂膜的红外光谱、耐水性、力学性能和表面疏水性等进行了研究。结果表明,通过氨基硅油改性的聚氨酯涂膜,在保持力学性能基本不变的情况下,其耐水性、表面疏水性等性能都有明显提高。其中,侧链氨基硅油(AEAPS)比直链氨基硅油(ATPS)具有更好的改性效果。     

聚苯基硅氧烷/聚丙烯酸酯复合乳液的合成与性能

本文以二苯基二甲氧基硅烷(DPDMS)和γ-甲基丙烯酰氧基丙基三甲氧基硅烷(MAPTMS)合成了具有微交联结构的聚硅氧烷乳液,并以此为种子乳液再与丙烯酸酯类单体聚合,合成了稳定且性能优良的聚硅氧烷/聚丙烯酸酯复合乳液.用激光粒度分析仪、FTIR、DMA等进行了表征.结果表明,硅氧烷被有效的接枝到了聚丙烯酸酯分子链中;硅氧烷的加入,使聚合物的储能模量,损耗模量增大,玻璃化温度提高,加入量为10％时,Tg由50.5℃升高到57.2℃;加入20％的硅氧烷涂膜吸水率由13.8％降低到6.8％.     

PU/PSt型复合乳液粒子热力学平衡形态预测

以水性聚氨酯分散液为种子采用无皂乳液聚合新技术合成出了具有核壳结构的聚氨酯 聚苯乙烯(PU PSt)型复合聚合物乳液 .采用界面张力简化计算方法 ,通过界面自由能变化最小的热力学判据对合成的复合乳液粒子的热力学平衡形态进行了预测 .并利用透射电子显微镜和接触角法测定的膜的表面极性对其进行了证实 .结果表明 ,界面自由能变化的最小判据可以推广到PU PSt体系 ,文中给出的界面张力的简化计算方法是可行的 .     

软段对水性聚氨酯结构与性能的影响

以低聚物多元醇、异氟尔酮二异氰酸酯(IPDI)、亲水单体二羟甲基丙酸(DMPA),乙二胺为主要原料,制备了一组不同组成的聚氨酯乳液。通过粘度测定、粒度分析、力学性能和耐水性能测试、原子力显微镜(AFM)分析,研究了软段类型、软段分子量对乳液及其胶膜性能的影响。结果表明,分子结构规整、易结晶的软段合成的聚氨酯树脂力学性能和耐水性能都较好,对聚己二酸酯而言,分子量减小,其合成的水性聚氨酯拉伸强度提高,耐水性能却有很大程度的下降。     

Preparation and characterization of waterborne polyurethanes modified with bis(3-(1-methoxy-2-hydroxypropoxy) propyl) terminated polysiloxanes

Polyurethanes(PU) were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU(PSU) was obtained through reaction of the PU prepolymers with bis(3-(1-methoxy-2-hydroxypropoxy)propyl) terminated polysiloxanes(PMTS) of different molecular weight,specifically designed for this purpose.Results showed that,with increases in molecular weight of PMTS and its content,viscosity of the final PSU latexes decreased;phase separation of the incorporated PMTS in PSU films increased;the average particle sizes of the latexes varied between 110 nm and 330 nm,and the surface tension in the final latexes was relatively constant regardless of PMTS amount and its molecular weight.It was likely that copolymerized polysiloxanes had trend to enrich on top of the film when PMTS molecular weight was around 2000 and its content above 5 wt%.In general, PMTS modified polyurethane films showed higher performance than those from unmodified waterborne polyurethane latexes.     

Effects of altered reaction conditions on the synthesis of polyurethane-poly(2,2,2-trifluoroethyl methacrylate) triblock copolymer aqueous dispersion

Polyurethane-poly(2,2,2-trifluoroethyl methacrylate) (PU-PTFEMA) triblock copolymer aqueous dispersions were synthesized by three-step polymerization. In the first step, polyurethane prepolymers (PU) based on 2,4-toluene diisocyanate (TDI), polyether binary alcohol (N₂₂₀), α,α-dimethylol propionic acid (DMPA), hydroxypropyl acrylic acid (HPA), and butanediol (BDO) were prepared with butanediol as the chain extender and methylethylketon as solvent. The next step involved neutralization and dispersion in water, where prepolymers were neutralised by the addition of triethylamine (TEA). The last step was the seeded emulsion polymerization, where PU emulsion was used as seed, kalium persulfate (KPS) as initiator and 2,2,2-trifluoroethyl methacrylate (TFEMA) as comonomer. Factors influencing the synthesis of PU-PTFEMA copolymer aqueous dispersion were studied. Experimental data indicate that factors influencing the synthesis of PU-PTFEMA copolymer aqueous dispersion mainly involve reaction temperature, reaction time, the concentration of initiator, DMPA content, TFEMA content. Rotational viscometer and dynamic light scattering (DLS) were used to characterize the properties of copolymer aqueous dispersion.     

Synthesis and characterization of polyimide‐polysiloxane segmented copolymers for fuel cell applications

Sulfonated polyimides exhibit high strength, good film‐forming ability, chemical resistance, and, in their hydrated state, relatively high proton conductivity. Here we report the one‐pot synthesis of sulfonated polyimide‐polysiloxane segmented copolymers through the reaction of a dianhydride with a mixture of three diamines: a nonionic aromatic diamine (4,4′‐oxydianiline), a sulfonated diamine (4,4′‐diamino‐2,2′‐biphenyldisulfonic acid), and a telechelic diamino polysiloxane. Copolymer compositions were evaluated using ¹H NMR and size‐exclusion chromatography. The presence of ion‐containing diamines in the reaction mixture inhibited stoichiometric incorporation of hydrophobic siloxane segments. Siloxane segments were found to lower the thermal stability of the polyimide host. Copolymers with and without siloxane segments were cast into free‐standing films. Equilibrium water sorption studies of cast films show that, for the compositions studied here, the presence of siloxane segments does not interfere with water swelling, suggesting that a microphase‐segregated morphology may exist. TEM and SAXS analyses show evidence of phase‐segregation in sulfonated polyimides and reveal that siloxane segments strongly affect ionic clustering. However, proton conductivity only changes slightly when polysiloxane segments are incorporated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3747–3758, 2007     

Structural, thermal and morphological properties of aqueous hybrid emulsion of silylated poly (urethane)/organic modified montmorillonite nanocomposites based on a new silicone and imide ring containing vinylic macromonomer

A new silicone and imide ring containing vinylic macromonomer, N-trimethylsiloxyethyltrimellitilimidomethacrylate (TMSETMIM), has been synthesized for the formulation of waterborne polyurethane (PU). A vinyl group containing silicone, the (3-methacryloyloxypropyl) trimethoxysilane (MPTMS) was used for comparison of the effects of silicone type with TMSETMIM on the PU. Then, a series of new siliconized PU hybrid nanocomposites, were successfully synthesized by the emulsion polymerization in the presence of organic modified montmorillonite (OMMT) and an aqueous PU dispersion using ammonium peroxodisulfate (APS) as an initiator. The PU dispersion was synthesized by a polyaddition reaction of hexamethylene diisocyanate (HMDI), on polypropylene glycol (PPG-1000) and dimethylol propionic acid (DMPA) as a chain extender. The obtained NCO chain ends reacted with water (which acts as a further chain extender producing some urea bonds). The structural elucidation of monomer was carried out by FTIR, ¹H-NMR, and ¹³C-NMR spectroscopic techniques. The copolymers were also characterized by using FTIR. Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphologies of the copolymers were characterized with scanning electron microscopy (SEM) and transition electron microscopy (TEM) and then the effects of silicone concentrations on the water absorption ratio was examined. The formed film from the hybrid emulsion containing TMSETMIM could provide obviously higher water-resistance property in comparison with MPTMS. Also, the heat stability increases while the T _g decreased.