共查询到16条相似文献,搜索用时 432 毫秒
1.
NO_x生成湍流反应率数值模拟的进展 总被引:1,自引:0,他引:1
利用计算机数值模拟来优选燃烧器或炉内降低氮氧化物的各种措施,如空气分级,燃料分级(再燃烧),烟气再循环,煤和生物质混烧等,预测其效果,受到国际上越来越大的重视.如何建立合理而经济的数学模型,是其中的关键问题之一.根据近年来国际上发表的不同研究者的研究结果,对湍流燃烧氮氧化物生成湍流反应率数值模拟的研究现状进行了评述,并且讨论了有待解决的问题和今后的发展方向. 相似文献
2.
3.
粉尘湍流火焰诱导激波问题是工业灾害研究中的重要课题.本文在自行设计的大型卧式燃烧管内,对铝粉火焰诱导激波现象进行了实验研究,测试了湍流火焰阵面前压缩波到激波的转捩过程,并将实验结果与数值模拟结果进行了比较. 相似文献
4.
5.
6.
7.
8.
9.
10.
基于雷诺应力湍流模型(简称RSM模型),研究了平衡大气边界层风场数值模拟问题.假设流体不可压,且不计雷诺应力输运方程中的对流项、浮力产生项、系统旋转产生项和扩散项,在准各向同性的条件下,推导出RSM模型湍动能k的表达式是标准k-ε模型k常数表达式的0.893倍.考虑k沿高度变化的修正,根据在标准k-ε模型中满足水平均匀性的湍流来流边界条件,提出在RSM模型中产生平衡大气边界层的湍流来流边界条件.基于空风洞的数值模拟结果表明,与工程上常用的湍流来流边界条件相比,基于本文提出的湍流来流边界条件得到的风场水平均匀性更优,且在整个流域内,得到的雷诺应力剖面更合适.从而验证了该湍流来流边界条件的适用性. 相似文献
11.
采用详细化学反应机理与CFD方法耦合的煤粉燃烧数值模拟程序,计算了煤粉燃烧过
程中CO, NOx和SOx等的浓度分布特性. 通过与实验对照,验证了数值模拟方法的
可靠性,并分析了燃烧温度和煤粉细度等因素对于NO生成的影响. 结果表明温度对于NO的
生成影响较大,随着温度的增加,NO的生成浓度明显增加;对于不同煤种,可能存在一个温
度点,这时NO的生成速率将非常快;在计算范围内,温度对SO2的最终生成浓度没有
明显影响,而只影响SO2的释放过程. 煤粉细度对于NO生成有较小的影响. 相似文献
12.
13.
Gregory Hannebique Patricia Sierra Eleonore Riber Bénédicte Cuenot 《Flow, Turbulence and Combustion》2013,90(2):449-469
Because of compressibility criteria, fuel used in aeronautical combustors is liquid. Their numerical simulation therefore requires the modeling of two-phase flames, involving key phenomena such as injection, atomization, polydispersion, drag, evaporation and turbulent combustion. In the present work, particular modeling efforts have been made on spray injection and evaporation, and their coupling to turbulent combustion models in the Large Eddy Simulation (LES) approach. The model developed for fuel injection is validated against measurements in a non-evaporating spray in a quiescent atmosphere, while the evaporation model accuracy is discussed from results obtained in the case of evaporating isolated droplets. These models are finally used in reacting LES of a multipoint burner in take-off conditions, showing the complex two-phase flame structure. 相似文献
14.
湍流燃烧中的概率密度函数方法 总被引:6,自引:1,他引:5
用求解速度和化学热力学参数联合概率密度函数(pdf)输运方程的方法,计算湍流燃烧问题时,湍流输运和化学反应等过程可以精确计算,无须模拟。它还可以提供比统计矩模型方法更多的信息,因此是一个很有潜力的方法。本文给出了湍流燃烧概率密度函数的输运方程,扼要地介绍了目前应用较多的随机过程模型,以及求解概率密度函数方程的Monte Carlo算法。最后引用两个例子说明概率密度函数方法的优越性。 相似文献
15.
Numerical simulation of methane-air turbulent jet flame using a new second-order moment model 总被引:2,自引:0,他引:2
A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame.
The predicted results are compared with the experimental results and with those predicted using the wellknown EBU-Arrhenius
model and the original second-order moment model. The comparison shows the advantage of the new model that it requires almost
the same computational storage and time as that of the original second-order moment model, but its modeling results are in
better agreement with experiments than those using other models. Hence, the new second-order moment model is promising in
modeling turbulent combustion with NOx formation with finite reaction rate for engineering application.
The project sponsored by the Foundation for Doctorate Thesis of Tsinghua University, and the National Key Project in 1999–2004
sponsored by the Ministry of Science and Technology of China 相似文献
16.
球形封闭容器内一个简单的煤粉燃烧爆炸模型 总被引:1,自引:0,他引:1
在分析了大量球形封闭容器内煤粉燃烧爆炸实验数据基础上,考虑了煤粉燃烧爆炸机理所涉及的湍流燃烧、相变、各种化学反应动力学过程等复杂因素,并且对球形封闭容器内由于煤粉混合不均匀造成的燃烧不充分给予了考虑,得到了球形封闭容器内煤粉燃烧爆炸特征的数值计算结果,计算的压力-时间曲线与实验结果符合较好。 相似文献