Characterization and Physical Properties of PbO-As2O3 Glasses Containing Molybdenum Ions

PbO-As₂O₃ glasses containing different concentrations of MoO₃ ranging from 0 to 1 mol% (in steps of 0.2) were prepared. The samples were characterized by X-ray diffraction, differential thermal analysis and scanning electron microscopy. A number of studies, viz., optical absorption, magnetic susceptibilities, ESR spectra, IR spectra, elastic properties (Young's modulus E, shear modulus G and microhardness H) and dielectric properties (constant ε, loss tan δ, a.c. conductivity σ_ac over a range of frequency and temperature and breakdown strength), have been carried out on these glasses. Optical absorption, ESR and magnetic susceptibility measurements suggest that when MoO₃ concentration is greater than 0.4 mol% in the glass matrix, molybdenum ions exist in Mo⁵⁺ state with Mo(V)O⁻₃ complexes that act as modifiers in addition to Mo⁶⁺ state with MoO₄ and MoO₆ structural groups. The studies on elastic and dielectric properties indicate that the mechanical and insulating strengths of the glass are considerably high when the content of MoO₃ is about 0.4 mol% in the glass matrix.     

Phase stability and ionic conductivity in substituted La2W2O9

Different substitutions, i.e. Sr²⁺, Ba²⁺, K⁺, Nb⁵⁺ and V⁵⁺, have been performed in the triclinic α-La₂W₂O₉ structure in order to stabilise the high temperature and better ionic conductor cubic β-phase. This approach has been used to try to obtain a new series of ionic conductors with LAMOX-type structure without molybdenum and presumably better redox stability compared to β-La₂Mo₂O₉. Nanocrystalline materials obtained by a freeze-drying precursor method at 600 °C exhibit mainly the β-La₂W₂O₉ structure, however, the triclinic α-form is stabilised as the firing temperature increases and the crystallite size grows. Only high levels of Ba²⁺ and V⁵⁺ substitutions retained the cubic form at room temperature after firing above 1100 °C. However, these phases are metastable above 700 °C, exhibiting an irreversible transformation to the low temperature triclinic α-phase. The synthesis, structure, phase stability, kinetic of phase transformation and electrical conductivity of these materials have been studied in the present report.     

A new lead Mo(IV) phosphate with a tunnel structure: Pb2Mo2O(PO4)2P2O7

A molybdenum (IV) phosphate containing lead, Pb₂Mo₂(PO₄)2P₂O₇, has been synthesized for the first time. It crystallizes in the space group C2/c with a=14.098(1) Å, b=14.187(2) Å, c=6.5592(4) Å and β=102.08(1)°. Its original tunnel structure, built up of Mo₂O₁₁ bioctahedra, P₂O₇ and PO₄ phosphate groups can be described from the assemblage of [Mo₄P₄O₂₄]_∞ ribbons interconnected through monophosphate groups. The stereoactivity of the 6s² lone pair of Pb²⁺, which is surrounded by nine oxygen atoms, is discussed.     

Studies on molybdenum carbide supported HZSM-5 (Si/Al = 23, 30, 50 and 80) catalysts for aromatization of methane

Here in, for the first time we are reporting molybdenum carbide reduction into metallic molybdenum during methane aromatization on HZSM-5 (Si/Al ratio = 23, 30, 50 and 80) at methane space velocity of 1800 mL.g_cat⁻.h⁻. Benzene yield was influenced by the surface metallic molybdenum through the non-aromatic carbon deposits formation via linear hydrocarbons degradation on HZSM-5 with fewer acidity (Si/Al ratio = 30, 50 and 80). Our XPS analysis results demonstrated improved surface metallic molybdenum in spent Mo₂C/HZSM-5 = 80 (0.71 atom. %) and 50 (0.54 atom. %) samples over Mo₂C/HZSM-5 = 30 (0.33 atom. %) and 23 (0.20 atom. %) samples. Furthermore, HR-TEM and FFT analysis images clearly established fine distribution of distorted spherical shaped Mo₂C particles with 6–14 nm size in spent Mo₂C/HZSM-5 = 23. On the other hand, Mo₂C particle size was increased upto 22 nm in Mo₂C/HZSM-5 = 80. The ease reduction of Mo₂C into metallic molybdenum and aggregation of Mo₂C particles in spent higher Si to Al ratio (50 and 80) samples was associated with weak interactions between Mo₂C and the HZSM-5 with fewer acidity. At 700 °C, the order of benzene yield as follows: Mo₂C/HZSM-5 = 80 (2.2%) < Mo₂C/HZSM-5 = 50 (3.25%) < Mo₂C/HZSM-5 = 30 (5.2%) < Mo₂C/HZSM-5 = 23 (8.0%).     

The effect of reduction and temperature on the electronic core levels of tungsten and molybdenum in WO3 and WxMo1−xO3—A photoelectron spectroscopic study

X-Ray photoelectron spectroscopy (XPS) has been applied to electrochromic, reduced WO₃ and W_xMo_1?xO₃ crystals. In metal-reduced phases containing crystallographic shear planes the formation of Mo⁵⁺ (preferentially) and W⁵⁺ is observed in addition to that of the six-valent states. W⁵⁺ and W⁶⁺ are also dominant in H⁺-bombarded WO₃ indicating the formation of bronzes H_xWO₃. Significant differences are observed between single-crystal and “amorphous” oxides. The five-valent state is interpreted as being due to electron trapping and polaron formation. Under Ar⁺ bombardment the crystallinity of the surface is destroyed and a continuous distribution of W⁰, W⁴⁺, W⁵⁺, and W⁶⁺ is found similar to that observed for amorphous thin films. At low temperatures the (?-δ) metal-insulator (M-I) transformation of H⁺:WO₃ is accompanied by a spontaneous change in the linewidth of W⁵⁺ core levels but not of W⁶⁺ states. This is in accordance with recent theoretical approaches to M-I transformations.     

The molybdenum-molybdenum triple bond—XVII. Syntheses,spectroscopic and structural characterizations of Mo4F4(O—t-Bu)8 and Mo2F2(O—t-Bu)4(PMe3)2 (MoMo)

Hydrocarbon solutions of Mo₂(O—t-Bu)₆ and PF₃ (2 equiv) yield Mo₄F₄(O—t-Bu)₈, I, and PF₂(O—t-Bu). Compound I contains a bisphenoid of molybdenum atoms with two short MoMo distances, 2.26 Å, and four long MoMo distances, 3.75 Å, corresponding to localized MoMo triple bonding and non-bonding distances, respectively. The tetranuclear compound may be viewed as a dimer, [Mo₂(μ₂-F)₂(O-t-Bu)₄]₂, and addition of PMe₃ to hydrocarbon solutions of I yields Mo₂F₂(O—t-Bu)₄(PMe₃)₂, II, which contains an unbridged MoMo triple bond of distance 2.27 Å. Each molybdenum atom is coordinated to two oxygen atoms, one fluorine atom and the phosphorus atom of the PMe₃ ligand in a roughly square planar manner. The overall central Mo₂O₄F₂P₂ skeleton has C₂ symmetry and NMR studies (¹H, ¹⁹F and ³¹P) are consistent with the maintenance of this type of structure in solution. Infrared and electronic absorption spectral data are reported. These are the first compounds containing fluorine ligands attached to the (MoMo)⁶⁺ unit.     

Impact of Eu3+ Ions on Physical and Optical Properties of Li2O-Na2O-B2O3 Glass

The lithium sodium borate glasses doped with Eu³⁺ ion are prepared using melt quenching technique, their structural and optical properties have been evaluated. The density of prepared glasses exhibits an inverse behavior to the molar volume ranging from 2.26 g/cm³ to 2.43 g/cm³ and 26.95 cm³ /mol to 26.20 cm³ /mol, respectively. The absence of sharp peaks in XRD patterns confirms the amorphous nature of the prepared glasses. The absorption spectra yield four transitions centered at 391 nm (⁷F₀→⁵L₆), 463 nm (⁷F₀→⁵D₂), 531 nm (⁷F₀→⁵D₁), and 582 nm (⁷F₀→⁵D₀). The most intense red luminescence is observed at 612 nm corresponding to ⁵D₀→⁷F₂ transition under 390 nm laser excitations.     

New pseudo-one-dimensional metals: M2Mo6Se6 (M = Na,In, K,TI), M2Mo6S6 (M = K,Rb, Cs), M2Mo6Te6 (M = In,TI)

We present a new series of ternary chalcogenides, derived from divalent molybdenum: M₂Mo₆X₆. These compounds crystallize in a hexagonal lattice with a ≈ 9 Å, c ≈ 4.5 Å, and space group $\text{P6}{}_3\text{m}$. The compounds are characterized by clusters (Mo₃)¹_∞ in the form of linear chains, resulting from a linear condensation of Mo₆ octahedral clusters. The (Mo₃)¹_∞ clusters are well separated from each other, with the shortest MoMo intercluster distance larger than 6 Å. The resulting pseudo-one-dimensional structures show remarkable anisotropy of physical properties.     

Activation and properties of Mo=O bonds in Mo/SiO2 catalysts

The existence of the charge transfer excited triplet state [Mo⁵⁺-O^-] produced by UV-irradiation of Mo/SiO₂ catalysts, and its reactivity are evidenced by experiments of photoluminescence, photoinduced metathesis, and photoreduction of CO. Mo⁵⁺ ions can be produced separately by thermal activation and O^- ions by further adsorption of N₂O on those Mo⁵⁺ ions. The latter of which are adsorbed on Mo⁶⁺ ions are found to be more reactive than O^2- of [Mo⁶⁺ =O^2-] bond. They are able either to add a molecule such as CO or C₂H₄, or to abstract hydrogen from H₂, CH₄ or trans-dicyanoethylene, or a CN group form tetracyanoethylene (TCNE). The Mo⁵⁺ ions are able to coordinate gas phase ligands when their coordination sphere possesses vacant sites. This is the case for tetracoordinated Mo⁵⁺ _4c ions arising from reduction of tetrahedral Mo⁶⁺ ions (Eq. (7)). These Mo⁵⁺ _4c ions are similar to those produced by UV-irradiaiion (Eq. (2)). In addition, if the adsorbed molecule has a sufficiently large electron affinity, such as TCNE or O₂, an electron transfer can occur (Eq. (9) and (17)). The [Mo⁵⁺-O^-] bond obtained by thermal activation is more difficult to evidence than that obtained with UV-activation because it is not detectable by EPR. However, the EPR results obtained at low temperature show that the O^- ions adsorbed on Mo/SiO₂ catalysts as well as the [Mo⁵⁺-O^-] excited triplet state obtained by UV-irradiation of 1Mo⁶⁺=O²] interact with methanol (Eq. (16)). They are consistent with the mechanism of methanol oxidation occurring at high temperature (Eq. (4)).     

Two mixed valent molybdenophosphates with a tunnel structure closely related to K0.17MoP2O7: Pb2(PbO)2Mo8(P2O7)8 and PbK2Mo8(P2O7)8

Two new mixed valent Mo(III)/Mo(IV) diphosphates containing lead Pb₂(PbO)₂Mo₈(P₂O₇)₈ and PbK₂Mo₈(P₂O₇)₈ have been synthesized. The [Mo₈P₁₆O₅₆]∞ frameworks of these phosphates are closely related to that of K_0.17MoP₂O₇: the MoO₆ octahedra and P₂O₇ groups form two sorts of large eight-sided tunnels. They are occupied in an ordered way by PbO chains and Pb²⁺ cations in Pb₂(PbO)₂Mo₈(P₂O₇)₈ and by K⁺ and Pb²⁺ cations in PbK₂Mo₈(P₂O₇)₈. It results in different symmetries of these two structures, which are tetragonal and monoclinic, respectively, showing the great flexibility of these mixed frameworks, susceptible to accommodate various species with different sizes.     

Mo_2C/γ-Al_2O_3催化剂上苯加氢反应的原位红外光谱研究

采用程序升温反应法制备了钝化态、还原钝化态和新鲜态Mo2C/γ-Al2O3催化剂,结合原位红外光谱表征技术和反应性能评价,考察、比较了三种催化剂苯加氢反应活性.原位红外光谱结果表明,新鲜态Mo2C/γ-Al2O3催化剂在室温就显示了较好的苯加氢反应活性,表现了类贵金属的催化活性.CO吸附在反应前后新鲜态Mo2C/γ-Al2O3催化剂上的对比结果表明,低价态的Mo位(Moδ+(0δ2))是苯加氢反应活性中心.三种催化剂的反应活性结果表明,新鲜态Mo2C/γ-Al2O3催化剂反应活性最好,催化剂寿命最长,失活之后在500°C下H2处理即可恢复原有活性.     

Octahedral Mo6 clusters supported by methoxide ligands

The structures of the [Mo₆(μ₃-Cl)₈(OMe)₆]^2? and [Mo₆(μ₃-OMe)₈(OMe)₆]^2? anions have been determined and reveal interesting comparisons of MM and MO distances with related Mo₆(μ₃-X)₈⁴⁺ containing compounds and polynuclear alkoxides of molybdenum.     

From Small {Mo2O4}2+ Aggregates to Infinite Solids

Mononuclear oxohalomolybdates(V) readily generate in the mixtures of alcohols and pyridines through a series of substitution and dimerization reactions, still reactive dinuclear {Mo₂O₄}²⁺ fragments which assemble together into larger cluster species. In all, the {Mo₂O₄}²⁺ unit with the two molybdenum atoms connected by a single metal-metal bond, appears as a recurrent structural motif, either as a single {Mo₂O₄}²⁺ unit in dinuclear compounds or as assemblies of two, three, four or six units through bridging oxygen donor ligands in tetranuclear, hexanuclear, octanuclear and dodecanuclear compounds, respectively. Pyridine, halide, alkoxide and alcohol ligands occupy the peripheral positions of the molybdenum oxide cores. Their structures will be presented in terms of different arrangements and connectivities among the basic dinuclear building blocks. By using a suitable linker, an oxalate adopting a bisbidentate binding mode was shown to serve the purpose, the {Mo₂O₄}²⁺ units were connected into infinite chains.     

Catalytic performance of Fe modified K/MO2C catalyst for CO hydrogenation

Fe modified and un-modified K/Mo2C were prepared and investigated as catalysts for CO hydrogenation reaction. Compared with K/Mo2C catalyst, the addition of Fe increased the production of alcohols, especially the C2+OH. Meanwhile, considerable amounts of C5+ hydrocar- bons and C2= -C4= were formed, whereas methane selectivity greatly decreased. Also, the activity and selectivity of the catalyst were readily affected by the reaction pressure and temperature employed. According to the XPS results, Mo4+ might be responsible for the production of alcohols, whereas the low valence state of Mo species such as Mo0 and/or Mo2+ might be account for the high activity and selectivity toward hydrocarbons.     

Ein Beitrag über CuPrMo2O8 und CuTbMo2O8

A Contribution on CuPrMo₂O₈ and CuTbMo₂O₈ Single crystals of (I): CuPrMo₂O₈ and (II): CuTbMo₂O₈ were prepared by solid state reactions in closed copper tubes. They crystallize with orthorhombic symmetry, space group D-Pbca, (I): a = 10.4114, b = 9.8917, c = 14.8287 Å, (II): a = 10.2243, b = 9.7385, c = 14.6000, Z = 8. Both compounds are isotypic to CuYMo₂O₈, showing isolated MoO₄ tetrahedra, square antiprismatic coordination of Ln³⁺ and Cu⁺ besides one edge of an O^2? triangle. Calculations of the coulombterm of lattice energy support the oxidation state Cu²⁺ in combination with mixed valences of Mo⁶⁺ and Mo⁵⁺ on the molybdenum point positions.     

Mechanisms of molybdenum substitution in vanadium antimonate

The formation of a solid solution containing the three elements V, Sb and Mo, which are key-elements in the design of light alkane oxidation catalysts, has been studied by incorporating molybdenum into the pure VSbO₄ compound as obtained in air at 700°C (V³⁺_0.28V⁴⁺_0.64□_0.16Sb⁵⁺_0.92O₄). Monophasic compounds with a rutile-type structure have been obtained and characterized by X-ray diffraction, electron microscopy, Infrared Fourier transform, X-ray absorption and electron spin resonance spectroscopies. At low molybdenum content, Mo⁶⁺ substitute V⁴⁺ in the cationic-deficient structure. The charge balance is maintained by an increase of the cationic vacancy number. This leads to the formation of a solid solution corresponding to the formula V³⁺_0.28V⁴⁺_0.64−3xMo⁶⁺_2x□_0.16+xSb⁵⁺_0.92O₄ with 0<x<0.09. At higher molybdenum content, Mo⁵⁺ are stabilized and substitute Sb⁵⁺ in the rutile structure: V³⁺_0.28V⁴⁺_0.37Mo⁶⁺_0.18□_0.25Mo⁵⁺_ySb⁵⁺_0.9−yO₄ with 0<y<0.06. At higher molybdenum content the rutile phase is no longer stable and two new phases are formed: Sb₂O₄ and a new mixed vanadium molybdenum antimonate.     

Fabrications of some kinds of 2-D frameworks consisting of nanosized polyoxomolybdate anion [Mo36O112(H2O)16] via condensation processes

We succeeded to prepare novel [Mo₃₆O₁₁₂(H₂O)₁₆]⁸⁻ ({Mo₃₆}) compounds by using 1,3-diamino-2-propanol (βOHC₃-DA) and 1,3,5-tris(aminomethyl)benzene (MES-TA)+1,3-diaminopropane (C₃-DA) as linkers, and determined their crystal structures. We have confirmed they have unique two-dimensional (2-D) molybdenum oxide frameworks, which are formed by condensation of {Mo₃₆}s. Side-staggered arrays of {Mo₃₆}s, connected in lying position by eight bridges per a {Mo₃₆}, are formed in the compound with βOHC₃-DA, while herringbone arrays of {Mo₃₆}s, connected in standing position by four bridges per a {Mo₃₆}, are built in the compound with MES-TA+C₃-DA. The latter compound exhibited non-stoichiometric property, and its composition and cell parameters varied depending on the relative concentration of MES-TA in the mother solution.     

Synthesis and crystal structure of [Th2(μ-SO4)2(DMSO)12]{[Mo3S7Br5(DMSO)]Br}2·2DMSO·PhCN

Crystallization from a ThBr₄/DMSO/(Et₄N)₂Mo₃S₇Br₆ mixture in benzonitrile gave [Th₂(µ-SO₄)₂×(DMSO)₁₂]{[Mo₃S₇Br₅(DMSO)]Br}₂·2DMSO·PhCN. The complex has an ionic structure. In the [Th₂(µ-SO₄)₂(DMSO)₁₂]⁴⁺ centrosymmetric binuclear cation, the metal atoms are bound by two sulfate bridges and are coordinated by DMSO oxygen atoms, the coordination polyhedron of thorium(IV) being a tricapped trigonal prism (c.n. 9). The [Mo₃S₇Br₅(DMSO)]^–cluster anion and the bromide ion form an ion pair with S_ax...Br^– short contacts, and the DMSO molecule is coordinated to one of the molybdenum atoms via the oxygen atom. The voids of the structure are filled with DMSO and PhCN solvate molecules, the latter being disordered over two positions related by an inversion center.Original Russian Text Copyright © 2004 by M. N. Sokolov, O. A. Gerasko, S. F. Solodovnikov, and V. P. FedinTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 516–521, May–June 2004.     

Synthesis and Structure of the Supramolecular Adduct Formed by the [Mo3S4(H2O)7Cl22+ Cluster Complex with Cucurbituril: {[Mo3S4(H2O)7Cl2](C36H36N24O12)} Cl2·10H2O

Slow crystallization of an HCl solution containing cucurbituril (C₃₆H₃₆N₂₄O₁₂) and a triangular molybdenum cluster aqua complex [Mo₃S₄(aq)]⁴⁺ yielded a supramolecular adduct of { [Mo₃S₄(H₂O)₇Cl₂]×(C₃₆H₃₆N₂₄O₁₂₎Cl₂·10H₂O composition. The molecular and crystal structure of the adduct were established by single crystal X-ray diffraction. Monoclinic crystal system, space group P2₁/c, a = 21.4762(2) Å, b = 14.6853(1) Å, c = 24.6480(3) Å; β = 112.8366(5)°, V _cell = 7164.26(12) ų, Z = 4, ρ_calc = 1.725 g/cm³.Original Russian Text Copyright © 2004 by E. V. Chubarova, D. G. Samsonenko, J. H. Platas, M. N. Sokolov, and V. P. Fedin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 950–954, September–October, 2004.     

Electronic, magnetic and structural properties of A2VMoO6 perovskites (A=Ca, Sr)

The perovskites Sr₂VMoO₆ and Ca₂VMoO₆ have been synthesized by liquid-mix technique in citrate melts, and their electronic, magnetic and structural properties have been investigated. No signs of V/Mo ordering are seen by synchrotron X-ray powder diffraction, but despite the chemical disorder both oxides are highly conductive and Pauli paramagnetic. Electrical conductivities of these solid solutions are comparable or higher than those reported for polycrystalline AMoO₃ end members. It is suggested that the delocalized metallic conductivity of these compounds with two different transition-metal atoms implies valence equilibrium between the degenerate oxidation-state couples V⁴⁺Mo⁴⁺ and V³⁺Mo⁵⁺.