过渡金属离子液体EMIFeCl3的性质研究

在干燥高纯氩气氛的手套箱内, 直接将摩尔比为1∶1的高纯无水FeCl3与氯化1-甲基-3-乙基咪唑(EMIC)混合, 得到棕色透明的离子液体EMIFeCl4. 在293.15~343.15 K温度范围内测定了该离子液体的密度和表面张力. 利用Glasser经验方程和空隙模型研究了EMIFeCl4的性质, 并与离子液体EMIAlCl4进行比较, 指出空隙模型具有一定的合理性.     

稀散金属室温离子液体BMIInCl4的性质研究

在干燥高纯氩气氛的手套箱内,直接将摩尔比为1∶1的高纯无水InCl₃与氯化1-甲基-3-丁基咪唑(BM IC l)混合,得到无色透明的离子液体BM IInCl₄.在278.15-343.15 K温度范围内测定了该离子液体的密度和表面张力.利用G lasser经验方程和空隙模型讨论了BM IInCl₄的性质,并与离子液体BMIAlCl₄作了比较,证明了空隙模型具有一定的合理性.     

铝基离子液体BMIAlCl4的热力学性质

在高纯氩气氛下, 直接将摩尔比为1:1的高纯无水AlCl₃和BMIC(氯化1-甲基-3-丁基咪唑)搅拌混合, 得到一种无色透明的离子液体BMIAlCl₄. 在278.2～343.2 K范围内, 用最大气泡法测定了BMIAlCl₄的表面张力, 用Westphal天平法测定了该离子液体的密度；利用Glasser经验方程讨论了该离子液体的热力学性质, 并与其它离子液体作了比较. 根据空隙模型计算了BMIAlCl₄离子液体的恒压热膨胀系数, 与本文实验值基本一致, 说明空隙模型具有一定的合理性.     

Studies on the properties of ionic liquid BMIInCl4

An ionic liquid (IL) was prepared by directly mixing InCl₃ and 1-methyl-3-butylimidazolium chloride(BMIC) with molar ratio 1:1 under dry argon atmosphere. The densities, and surface tension of pure IL were determined at temperature range of (278.15 to 343.15±0.1K). The properties for ionic liquid based on group III were discussed using Glasser’s theory. The standard entropy, the surface energy and the crystal energy of ionic liquid were calculated, respectively. The crystal energy of ionic liquid is much lower than ionic solid and this is the underlying reason for forming ionic liquid at room temperature. In addition, a new theoretical model of IL, that is interstice model, was applied to calculate the thermal expansion coefficient of BMIInCl₄. The order of magnitude for the thermal expansion coefficient, a, calculated by the theoretical model is in good agreement with experimental value. The result shows that there is much reasonableness for the interstice model of ionic liquid. __________ Translated from Chemical Journal of Chinese University, 2005, 26(10)(in Chinese)     

Estimation of physicochemical properties of ionic liquid C6MIGaCl4 using surface tension and density

An ionic liquid (IL) C6MIGaCl4 (1-methyl-3-hexylimidazolium chlorogallate) was prepared by directly mixing GaCl3 and 1-methyl-3-hexylimidazolium chloride with molar ratio of 1/1 under dry argon. The density and surface tension of the IL were determined in the temperature range of 283.15-338.15 K. The ionic volume and surface entropy of the IL were estimated by extrapolation, respectively. In terms of Glasser's theory, the standard molar entropy and lattice energy of the IL were estimated, respectively. By use of Kabo's method, the molar enthalpy of vaporization of the IL, Delta lgHm0 (298 K), at 298 K was estimated. According to the interstice model, the thermal expansion coefficient of IL C6MIGaCl4, alpha, was calculated and in comparison with experimental value; their magnitude order is in good agreement.     

A new composite polymer electrolyte based on poly(ethyleneoxide)/ polysiloxane/BMImTFSI/organomontmorillonite

Composite polymer electrolytes based on poly(ethylene oxide)-polysiloxane/l-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide/organomontmorillonite(PEO-PDMS/1L/OMMT) were prepared and characterized.Addition of both an ionic liquid and OMMT to the polymer base of PEO-PDMS resulted in an increase in ionic conductivity.At room temperature,the ionic conductivity of sample PPB100-OMMT4 was 2.19×10~3 S/cm.The composite polymer electrolyte also exhibited high thermal and electrochemical stability and may potentially be applied in lithium batteries.     

室温离子液体BMIGaCl4热力学性质研究

An ionic liquid （IL） BMIGaCh was prepared by directly mixing GaCl3 and 1-methyl-3-butylimidazolium chloride with molar ratio of 1/1 under argon atmosphere. The densities and surface tensions of this pure ionic liquid were determined in the temperature range of 268.15 to （338.15±0.1） K. A new theoretical model of ionic liquids, an interstice model, was applied to calculate the thermal expansion coefficient of IL BMIGaCh, a, and the magnitude order of its value calculated by the theory was the same as experimental one. Both Raman scattering and ab initio calculations indicate that GaCl4^- is the only species containing Ga in the ionic liquid BMIGaCl4.     

Selective extraction/isolation of hemoglobin with ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate (BtmsimPF6)

Ionic liquid was for the first time employed for selective isolation of heme-protein species. Direct extraction of hemoglobin into ionic liquid without using any concomitant reagent or extractant was carried out. Hemoglobin at the level of 100 ng μL⁻¹ could readily be quantitatively extracted into ionic liquid (IL) 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate (BtmsimPF₆) in the absence of any co-existing extractants/additives at pH 7, at the same time; however, the other protein species do not interfere and remain in the aqueous phase. A back extraction efficiency of ca. 80% for 20 ng μL⁻¹ hemoglobin in ionic liquid phase was achieved with sodium dodecyl sulfate (SDS) solution as stripping reagent. ⁵⁷Fe Mossbauer spectra and circular dichroism (CD) spectra indicated that the penta-coordinated ferrous atom in hemoglobin provide a vacant or free coordinating position, which could be occupied by the cationic Btmsim⁺ moiety. The interaction/coordination reaction between the iron atom in the heme group of hemoglobin and the cationic ionic liquid moiety furnishes the driving force for facilitating fast transfer of hemoglobin into BtmsimPF₆. The present system was applied for selective isolation of heme-protein, i.e., hemoglobin from human whole blood without any pretreatment, giving rise to satisfactory results.     

Influence of cellulose gel matrix on BMIMCl ionic liquid dynamics and conductivity

Fast field-recycling magnetic resonance relaxometry (FFC NMR) was applied to measure the spin-lattice relaxation time, T ₁, of protons in pure ionic liquid (IL) 1-butyl-3-methylimidazolium chloride (BMIMCl) and when confined in cellulose (Cell) ion gel (Cell/BMIMCl) at different temperatures and different Larmor frequencies. The rotational and translational contributions were taken to interpret the relaxation data of neat BMIMCl and were described by Woessner’s and Torrey’s theoretical models, respectively. The ionic liquid–cellulose matrix interaction detected in 10 wt% polymer-ion gel was interpreted on the basis of a dynamical process called reorientation mediated by translational displacements (RMTD), which allow explanation of the significant slowing of the dynamics of IL cations at cellulose surfaces. Two types of cation diffusion were identified in this gel: a long-range translational diffusion within large cavities of the Cell matrix and diffusion occurring at the polymer surface. The correlational time constants and self-diffusion coefficients of the BMIMCl ionic liquid in bulk-like state and interaction with the cellulose matrix surface were determined. The conductivity measurements performed for pure IL and that confined in the Cell/BMIMCl ion gel show that the gelation only results in a small decrease of the ionic conductivity.     

Surface tension of pure and water-containing ionic liquid C5MIBF4 (1-methyl-3-pentylimidazolium tetrafluoroborate)

The surface tension of ionic liquid (IL) C(5)MIBF(4) (1-methyl-3-pentylimidazolium tetrafluoroborate) with various amount of water was measured by the forced bubble method at 278.15 to 338.15+/-0.05 K. In terms of standard addition method, the surface tension of pure IL C(5)MIBF(4) was obtained. The properties of surface for pure C(5)MIBF(4) were discussed in terms of the principle of independent surface action and Glasser's theory of lattice energy. Using the surface tension data, the interstice model was examined.     

Molecular dynamics simulations of charged nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

Nanoparticle self-assembly at liquid-liquid interfaces can be significantly affected by the individual nanoparticle charges. This is particularly true at ionic liquid (IL) based interfaces, where Coulombic forces play a major role. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, we have studied the self-assembly of hydrophobic nanoparticles with different surface charges at the IL/water and IL/oil (hexane) interfaces using molecular dynamics simulations. In the IL/water system, the nanoparticles were initially dispersed in the water phase but quickly equilibrated at the interface, somewhat in favor of the IL phase. This preference was lessened with increased nanoparticle charge. In the IL/hexane system, all charged nanoparticles interacted with the IL to some extent, whereas the uncharged nanoparticles remained primarily in the hexane phase. Potential of mean force calculations supported the observations from the equilibrium studies and provided new insights into the interactions of the nanoparticles and ionic liquid based interfaces.     

Ionic liquid incorporated polystyrene resin for solid-phase peptide synthesis

Ionic liquid (IL) resins with an ionic liquid environment on solid support were prepared by immobilizing ionic liquid spacers on polystyrene (PS) resin. The properties of IL resins were dramatically changed as the anions of IL were exchanged. The performance of IL resins for solid-phase peptide synthesis (SPPS) was evaluated by measuring coupling kinetics of the first amino acid and synthesizing several peptides on IL resins.     

Ordering layers of [bmim][PF6] ionic liquid on graphite surfaces: molecular dynamics simulation

Microscopic structures of room temperature ionic liquid (IL) [bmim][PF6] on hydrophobic graphite surfaces have been studied in detail by molecular dynamics simulation. It is clearly shown that both the mass and electron densities of the surface adsorbed ionic liquid are oscillatory, and the first peak adjacent to the graphite surface is considerably higher than others, corresponding to a solidlike IL bottom layer of 6 angstroms thick. Three IL layers are indicated between the graphite surface and the inner bulk IL liquid. The individually simulated properties of single-, double-, and triple-IL layers on the graphite surface are very similar to those of the layers between the graphite surface and the bulk liquid, indicating an insignificant effect of vapor-IL interface on the ordered IL layers. The simulation also indicates that the imidazolium ring and butyl tail of the cation (bmim+) of the IL bottom layer lie flat on the graphite surface.     

Printing graphene-carbon nanotube-ionic liquid gel on graphene paper: Towards flexible electrodes with efficient loading of PtAu alloy nanoparticles for electrochemical sensing of blood glucose

The increasing demands for portable, wearable, and implantable sensing devices have stimulated growing interest in innovative electrode materials. In this work, we have demonstrated that printing a conductive ink formulated by blending three-dimensional (3D) porous graphene–carbon nanotube (CNT) assembly with ionic liquid (IL) on two-dimensional (2D) graphene paper (GP), leads to a freestanding GP supported graphene–CNT–IL nanocomposite (graphene–CNT–IL/GP). The incorporation of highly conductive CNTs into graphene assembly effectively increases its surface area and improves its electrical and mechanical properties. The graphene–CNT–IL/GP, as freestanding and flexible substrates, allows for efficient loading of PtAu alloy nanoparticles by means of ultrasonic-electrochemical deposition. Owing to the synergistic effect of PtAu alloy nanoparticles, 3D porous graphene–CNT scaffold, IL binder and 2D flexible GP substrate, the resultant lightweight nanohybrid paper electrode exhibits excellent sensing performances in nonenzymatic electrochemical detection of glucose in terms of sensitivity, selectivity, reproducibility and mechanical properties.     

Comparison of electrodeposition of silver in ionic liquid microemulsions

Both ionic liquid (IL) and water are typical green solvents and have high electric conductivity. The use of IL microemulsions as templates and media for electrochemical synthesis of nano-materials is attractive. In this work, water-in-ionic liquid (W/IL) microemulsion and ionic liquid-in-water (IL/W) microemulsion were prepared, in which hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate was used. The cyclic voltammetry (CV) behavior and electroplating in the W/IL and IL/W microemulsion systems containing silver nitrate were investigated for the first time. Both the CV curves exhibit the presence of reduction and oxidation peaks corresponding to the deposition and dissolution of silver from the two microemulsion systems. However, the CV obtained from IL/W microemulsion system exhibits a crossover, which is different from that obtained from W/IL microemulsion system. The electrodeposits obtained from W/IL microemulsion system are nano-granular, while those obtained from IL/W microemulsion system are planar. These results are attributed to the different microenvironments of the microemulsions.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

离子液体电解质种类对活性炭电极超级电容器电化学性能的影响

本文将经水蒸气二次活化的椰壳活性炭（W-AC）作为电极材料,选择1-乙基-3甲基咪唑四氟硼酸盐（[EMIM]BF₄）作为电解质,结果表明W-AC电极的比电容量远高于未活化的椰壳活性炭（R-AC）.使用循环伏安、恒电流充放电、交流阻抗等方法研究了不同种类离子液体电解质对超级电容器电化学性能的影响.不同阴阳离子组成的离子液体作为电解质,直接影响超级电容器的电化学性能. 研究表明,由EMIM⁺和BMIM⁺阳离子与BF₄^-、TFSI^-阴离子构成的离子液体电解质较适用于W-AC电极. 其中在[EMIM]BF₄电解质中,单片电极的比电容量可高达153 F·g^-1;在1-丁基-3-甲基-咪唑四氟硼酸盐（[BMIM]BF₄）电解质中电位窗可达3.5V,能量密度可高达57 Wh·kg^-1.本研究对于构筑高性能超级电容器离子液体的选择提供参考,以满足不同应用领域需求.     

Synthesis and catalytic activity of porous polymer containing ionic liquid structures

A novel porous polymer containing ionic liquid (IL) structures was synthesized via quternization and condensation of 4-vinylpyridine and p-xylylene dichloride. The ionic liquid structures were incorporated in the polymeric framework and for this reason bulky IL molecules can hardly block pores and neutralize active sites. The polymer shows a high BET surface area and easily accessible active sites. Catalytically the polymer is very active in Michael additions with averaged yields over 96.0% achieved after short reaction times. The high BET surface, remarkable activity, operational simplicity, wide applicability and improved stability are the key properties of the polymer.     

Tribological properties of self-assembled monolayers of catecholic imidazolium and the spin-coated films of ionic liquids

A novel compound of an imidazolium type of ionic liquid (IL) containing a biomimetic catecholic functional group normally seen in mussel adhesive proteins was synthesized. The IL can be immobilized on a silicon surface and a variety of other engineering material surfaces via the catecholic anchor, allowing the tribological protection of these substrates for engineering applications. The surface wetting and adhesive properties and the tribological property of the synthesized self-assembled monolayers (SAMs) are successfully modulated by altering the counteranions. The chemical composition and wettability of the IL SAMs were characterized by means of X-ray photoelectron spectroscopy (XPS) and contact angle (CA) measurements. The adhesive and friction forces were measured with an atomic force microscope (AFM) on the nanometer scale. IL composite films were prepared by spin coating thin IL films on top of the SAMs. The macrotribological properties of these IL composite films were investigated with a pin-on-disk tribometer. The results indicate that the presence of IL SAMs on a surface can improve the wettability of spin-coated ionic liquids and thus the film quality and the tribological properties. These films registered a reduced friction coefficient and a significantly enhanced durability and load-carrying capacity. The tribological properties of the composite films are better than those of pure IL films because the presence of the monolayers improves the adhesion and compatibility of spin-coated IL films with substrates.     

Encapsulated ionic liquids (ENILs): from continuous to discrete liquid phase

Encapsulated ionic liquid (ENIL) material was developed, consisting of ionic liquid (IL) introduced into carbon submicrocapsules. ENILs contain >85% w/w of IL but discretized in submicroscopic encapsulated drops, drastically increasing the surface contact area with respect to the neat fluid. ENIL materials were here tested for gas separation processes, obtaining a drastic increase in mass transfer rate.