氯化烷基咪唑系列离子液体标准摩尔燃烧焓和生成焓

用精密氧弹热量计测定了4种离子液体: 氯化1-甲基-3-乙基咪唑(C2MIC), 氯化1-甲基-3-丁基咪唑(C4MIC), 氯化1-甲基-3-戊基咪唑(C5MIC)和氯化1-甲基-3-己基咪唑(C6MIC)的燃烧热, 计算了它们的标准摩尔燃烧焓 和标准摩尔生成焓 , 结合文献中的标准摩尔溶解焓, 估算了烷基咪唑阳离子在水溶液中的标准摩尔生成焓, 以及亚甲基对标准摩尔燃烧焓和标准摩尔生成焓的贡献.     

Estimation of Physico-chemical Properties of Ionic Liquid EPReO_4 Using Surface Tension and Density

An ionic liquid (IL) EPReO₄ (N‐ethylpyridinium rheniumate) was prepared. The density and surface tension values of the IL were determined in the temperature range of 293.15–343.15 K. The ionic volume and surface entropy of the IL were estimated by extrapolation, respectively. In terms of Glasser's theory, the standard molar entropy and lattice energy of the IL were estimated, respectively. Using Kabo's and Rebelo's methods, the molar enthalpy values of vaporization of the IL, Δ^g_lH⁰_m (298 K), at 298 K and, Δ^g_lH⁰_m (T_b), at hypothetical normal boiling point were estimated, respectively. According to the interstice model, the thermal expansion coefficient of IL EPReO₄ (α) was calculated and compared with experimental value, finding their magnitude order is in good agreement by 8.98%.     

锌基离子液体BMIZn2Cl5的性质研究

合成了对水和空气均稳定的锌基离子液体五氯化二锌-1-甲基-3-丁基咪唑(BMIZn2Cl5). 在313.15～343.15 K温度范围内, 测定了离子液体BMIZn2Cl5的密度和表面张力. 拟合并估算了BMIZn2Cl5的恒压热胀系数和表面熵, 并根据Glasser理论和离子液体的空隙模型, 讨论了BMIZn2Cl5的热力学性质, 估算出其晶格能和标准熵 , 计算了离子液体的恒压热胀系数α, 与实验值基本一致, 说明了空隙模型的合理性. 并利用Kabo和Rebelo的方法估算了锌基离子液体BMIZn2Cl5的正常沸点, 蒸气压, 汽化焓( )等性质参数.     

Studies on the properties of ionic liquid BMIInCl4

An ionic liquid (IL) was prepared by directly mixing InCl₃ and 1-methyl-3-butylimidazolium chloride(BMIC) with molar ratio 1:1 under dry argon atmosphere. The densities, and surface tension of pure IL were determined at temperature range of (278.15 to 343.15±0.1K). The properties for ionic liquid based on group III were discussed using Glasser’s theory. The standard entropy, the surface energy and the crystal energy of ionic liquid were calculated, respectively. The crystal energy of ionic liquid is much lower than ionic solid and this is the underlying reason for forming ionic liquid at room temperature. In addition, a new theoretical model of IL, that is interstice model, was applied to calculate the thermal expansion coefficient of BMIInCl₄. The order of magnitude for the thermal expansion coefficient, a, calculated by the theoretical model is in good agreement with experimental value. The result shows that there is much reasonableness for the interstice model of ionic liquid. __________ Translated from Chemical Journal of Chinese University, 2005, 26(10)(in Chinese)     

Estimation of physico-chemical properties of ionic liquid [C7mim][BF4]

Ionic liquid (IL) [C₇mim][BF₄] (1-heptyl-3-methyl-imidazolium tetrafluoroborate) was prepared and characterized. The density and surface tension of the IL were determined in the temperature range of 293.15–343.15 K. In terms of Glasser's theory, the standard molar entropy and lattice energy of the IL were estimated. Using Kabo's method, the molar enthalpy of vaporization of the IL, Δ_l^gH_m⁰ (298 K), was estimated. According to the interstice model, the thermal expansion coefficient of IL, α, was calculated and in comparison with experimental value, they are within one order of magnitude.     

Estimation of physicochemical properties of ionic liquids 1-alkyl-3-methylimidazolium chloroaluminate

The density and surface tension of ionic liquids [C(2)mim][AlCl(4)] (1-ethlyl-3-methyl imidazolium chloroaluminate) and [C(6)mim][AlCl(4)] (1-hexyl-3-methylimidazolium chloroaluminate) were measured in the temperature range from 283.15 to 338.15 +/- 0.05 K. In terms of these experimental results, the estimation of physicochemical properties of 1-alkyl-3-methylimidazolium chloroaluminate ([C(n)mim][AlCl(4)], n = 1-6) was carried out. With the use of the parachor, the values of surface tension of the ILs were predicted. In terms of Glasser's theory, the standard molar entropy, lattice energy, and surface properties of the ILs were estimated. With the use of Kabo's method and Rebelo's method, the molar enthalpy of vaporization of the ILs, Delta(l)(g)H(m)(0), was predicted. According to the interstice model, the values of the thermal expansion coefficient of the ILs were also estimated. Since the magnitude order of the thermal expansion coefficient estimated by the model is in good agreement with that measured experimentally, this result means that the interstice model is reasonable.     

铝基离子液体BMIAlCl4的热力学性质

在高纯氩气氛下, 直接将摩尔比为1:1的高纯无水AlCl₃和BMIC(氯化1-甲基-3-丁基咪唑)搅拌混合, 得到一种无色透明的离子液体BMIAlCl₄. 在278.2～343.2 K范围内, 用最大气泡法测定了BMIAlCl₄的表面张力, 用Westphal天平法测定了该离子液体的密度；利用Glasser经验方程讨论了该离子液体的热力学性质, 并与其它离子液体作了比较. 根据空隙模型计算了BMIAlCl₄离子液体的恒压热膨胀系数, 与本文实验值基本一致, 说明空隙模型具有一定的合理性.     

过渡金属离子液体EMIFeCl3的性质研究

在干燥高纯氩气氛的手套箱内, 直接将摩尔比为1∶1的高纯无水FeCl3与氯化1-甲基-3-乙基咪唑(EMIC)混合, 得到棕色透明的离子液体EMIFeCl4. 在293.15~343.15 K温度范围内测定了该离子液体的密度和表面张力. 利用Glasser经验方程和空隙模型研究了EMIFeCl4的性质, 并与离子液体EMIAlCl4进行比较, 指出空隙模型具有一定的合理性.     

过渡金属离子液体[C2mim][FeCl4]的溶解热

在干燥氩气氛下, 用等摩尔的高纯无水FeCl3和氯化1-甲基-3-乙基咪唑([C2mim][Cl])直接搅拌混合, 制备棕色透明的含过渡金属铁的离子液体[C2mim][FeCl4]. 在298.15 K下, 利用具有恒温环境的溶解反应热量计测定了这种离子液体的摩尔溶解焓(ΔsHm). 针对[C2mim][FeCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][FeCl4]的标准摩尔溶解焓(ΔsH 0—m=-76.6 kJ/mol), 以及Pitzer焓参数组合: β(0)LFe,Cl+β(0)L[C2mim], Cl+ΦLFe,[C2mim]=0.072209和β(1)LFe,Cl+β(1)L[C2mim], Cl=0.15527. 借助热力学循环和Glasser离子液体晶格能理论, 用Fe3+, Cl-和[C2mim]+的离子水化焓数据以及[C2mim][FeCl4]标准摩尔溶解焓, 估算得到了配离子[FeCl4]-(g)解离成Fe3+(g)和4Cl-(g)的解离焓为5659 kJ/mol. 这个结果揭示了离子液体[C2mim][FeCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即很大的离子水化焓被很大的[FeCl4]-(g)的解离焓相互抵消.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.     

Physicochemical Properties of the Protic Ionic Liquid Bis(2-hydroxyethyl)methylammonium Formate

A protic ionic liquid, bis(2-hydroxyethyl)methylammonium formate, (BHEMF), was synthesized and characterized. The density and surface tension of the protic ionic liquid were determined in the temperature range of 293.15?C343.15?K. The molar volume and surface entropy were estimated from the experimental density and surface tension data, respectively. In terms of Glasser??s theory, the standard molar entropy and lattice energy of the protic ionic liquid were estimated. Using the methods of Kabo and Rebelo, the molar enthalpy vaporization of the protic ionic liquid, $ ^{l} \Updelta^{g}H_{\text{m}}^{0} $ (298.15?K) at 298.15?K and $ ^{l} \Updelta^{g}H_{\text{m}}^{0} $ (T _b), at the hypothetical normal boiling point were estimated, respectively. According to the interstical model, the thermal expansion coefficient of the protic ionic liquid, ??, was calculated and the result is in very good agreement with the experimental value.     

The enthalpies of vaporisation of ionic liquids: new measurements and predictions

The enthalpies of vaporisation, Δ(vap)H(298), of seven ionic liquids (ILs) (four imidazoliums, a pyridinium, a phosphonium and an isouronium) have been determined by temperature programmed desorption using line of sight mass spectrometry. They were: 1-ethyl-3-methylimidazolium bis(pentafluoroethyl)phosphinate, [C(2)C(1)Im][PO(2)(C(2)F(5))(2)]; 1-butyl-3-methylimidazolium octylsulfate, [C(4)C(1)Im][C(8)OSO(3)]; 1-butyl-3-methylimidazolium tetrafluoroborate, [C(4)C(1)Im][BF(4)]; 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate, [C(6)C(1)Im][FAP]; 1-butylpyridinium methylsulfate, [C(4)Py][C(1)OSO(3)]; trihexyl(tetradecyl)phosphonium tetrafluoroborate, [P(6,6,6,14)][BF(4)] and O-ethyl-N,N,N',N'-tetramethylisouronium trifluoromethanesulfonate, [C(2)(C(1))(4)iU][TfO]. The values were found to be consistent with a previously proposed, predictive, model in which Δ(vap)H(298) is decomposed into a Coulombic component (computable from the IL density) and van der Waals components from the anion and cation. Two previously predicted values of Δ(vap)H(298) were found to be within 6 kJ mol(-1) of the measured experimental values. Values for the van der Waals components are tabulated for eleven cations and twelve anions. Predictions are made for Δ(vap)H(298) for 13 ILs with as yet unmeasured Δ(vap)H(298) values (using experimental molar volumes), and for a further 44 ILs using estimated molar volumes.     

Surface tension of pure and water-containing ionic liquid C5MIBF4 (1-methyl-3-pentylimidazolium tetrafluoroborate)

The surface tension of ionic liquid (IL) C(5)MIBF(4) (1-methyl-3-pentylimidazolium tetrafluoroborate) with various amount of water was measured by the forced bubble method at 278.15 to 338.15+/-0.05 K. In terms of standard addition method, the surface tension of pure IL C(5)MIBF(4) was obtained. The properties of surface for pure C(5)MIBF(4) were discussed in terms of the principle of independent surface action and Glasser's theory of lattice energy. Using the surface tension data, the interstice model was examined.     

稀散金属室温离子液体BMIInCl4的性质研究

在干燥高纯氩气氛的手套箱内,直接将摩尔比为1∶1的高纯无水InCl₃与氯化1-甲基-3-丁基咪唑(BM IC l)混合,得到无色透明的离子液体BM IInCl₄.在278.15-343.15 K温度范围内测定了该离子液体的密度和表面张力.利用G lasser经验方程和空隙模型讨论了BM IInCl₄的性质,并与离子液体BMIAlCl₄作了比较,证明了空隙模型具有一定的合理性.     

利用等张比容估算乳酸离子液体同系物[C_nmim][Lact](n=2,3,4,5,6)的热力学性质

合成了基于烷基咪唑的乳酸离子液体[C4mim][Lact](1-丁基-3-甲基咪唑乳酸盐),并用1HNMR和DSC作了表征.由于乳酸离子液体和水易形成氢键,用通常的办法很难除去乳酸离子液体中的杂质水.为了排除杂质水的干扰,应用了标准加入法,配制一系列含有已知微量水的乳酸离子液体样品,在308.15～343.15K温度范围,用重量法测定了这些样品的密度,用最大气泡法测定了表面张力,用折光率确定了摩尔极化度,然后外推得到无水离子液体数据.在这些实验数据基础上,利用等张比容的加和性,估算了乳酸离子液体同系物[Cnmim][Lact](n=2,3,4,5,6)的表面张力、折射率、摩尔极化度、汽化焓和热膨胀系数,与实验数据相比有较好的一致性.     

Pitzer-Simonson理论和Pitzer-Simonson-Clegg理论在离子液体PMIBF4水溶液中的应用

在278.15～343.15 K温度范围内, 测定了在浓度范围从摩尔分数0.09的四氟硼酸-1-甲基-3-戊基咪唑(PMIBF₄)离子液体水溶液到纯离子液体的密度, 计算了离子液体PMIBF₄水溶液的表观摩尔体积^fV, 讨论了Pitzer-Simonson (PS) 理论和Pitzer-Simonson-Clegg (PSC)理论的适用性. 以纯离子液体为参考态, 用实验数据分别拟合了Pitzer-Simonson (PS)方程、Pitzer-Simonson-Clegg (PSC)方程和简化PSC方程, 得到了这些理论模型的体积参数值. 从拟合偏差来看, PSC方程比PS方程有更好的适用性. 同时还可看出, PSC方程比只有三个参数的简化PSC方程有更小的拟合标准偏差和更好的相关系数.     

Study on thermodynamic properties of a new air and water stable ionic liquid based on metal rhenium

A new air and water stable ionic liquid (IL) based on rhenium, N-butyl-pyridine perrhenate ([C₄Py][ReO₄]), was synthesized. The density and surface tension of the IL were determined over the temperature range of (293.15–343.15) K. In terms of the Glasser theory of IL and parachor, a series of physico-chemical properties: molecular volume, standard entropy, surface tension, and molar enthalpy of vaporization were predicted, respectively. According to the interstice model, the thermal expansion coefficient of the IL was calculated and in comparison with experimental value, it is in good agreement by 3.92%.     

吡咯烷酮酸性离子液体中硼酸酯的催化合成

研究了硼酸与频哪醇和环己醇在离子液体1-甲基-2-吡咯烷酮硫酸氢盐（[Hnmp]HSO4）、1-丁基-3-甲基咪唑四氟硼酸盐（[Bmim]BF4）及1-丁基-3-甲基咪唑六氟磷酸盐([Bmim]PF6)中生成2-环己氧基-4,4,5,5-四甲基-1,3,2-二氧硼烷的酯化反应。 考察了不同离子液体、反应温度、反应时间和离子液体与反应物物质的量比等对反应的影响。 结果表明,当n(硼酸)∶n(频哪醇)∶n(环己醇)∶n([Hnmp]HSO4)=1∶1∶1∶1,反应温度为70 ℃和反应时间为4 h时,硼酸酯的产率为72.5%,离子液体重复使用4次,催化活性无明显降低。     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Deviations from ideality in mixtures of two ionic liquids containing a common ion

Excess molar volumes of six binary mixtures composed of two ionic liquids of the 1-methyl-3-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide family -- ([C(m)()mim] + [C(n)()mim])[NTf(2)] with n and m ranging from 2 to 10 -- were measured for several compositions at 298 and 333 K. Similarly, three other binary systems containing [C(4)mim](+) (1-methyl-3-butylimidazolium) as a common cation have been studied: [C(4)mim]([NTf(2)] + [PF(6)]), [C(4)mim]([NTf(2)] + [BF(4)]) and [C(4)mim]([BF(4)] + [PF(6)]). Thus, the mixing process of two distinct ions of equal sign embedded in a constant field network of a given counterion was analyzed. All systems exhibit small, positive V(E) values of the order of a few tenths of cm(3) mol(-1), which are essentially temperature and pressure independent. The results show additive trends, for instance, the V(E) values become larger as the difference between the alkyl chain lengths of the two cations increases. The Flory theory of mixtures provides a useful, semiquantitative correlation between the excess volumes and excess enthalpies in these systems, allowing for comparison with analogous results obtained within the linear primary alcohols.