2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Synthesis and reactivity of functionalized bridged m-xylylenedioxycalix[6]arenes

The synthesis of A,D-m-xylylene-bridged calix[6]arenes 1-8 functionalized at position 5 of the spacer arm is described. The cone conformation of the new bridged calix[6]arenes has been established by (1)H and (13)C NMR. The X-ray structure of compound 6 confirmed the cone conformation also in the solid state. Compounds 9 and 10, which are branched-like structures, were obtained by reductive amination of 5-amino-A,D-m-xylylene-bridged-B,C,E,F-tetra-O-ethylcalix[6]arene 7 with diformyl calix[4]arene and CTV derivatives 22 and 24, respectively.     

Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

First enantiopure calix[6]aza-cryptand: synthesis and chiral recognition properties towards neutral molecules

The synthesis of the first enantiopure calix[6]aza-cryptand was achieved in five steps from the known 1,3,5-tris-O-methylated calix[6]arene. A ¹H NMR spectroscopic study has shown that the chiral tren cap constrains the calixarene core in a straight cone conformation ideal for host–guest chemistry applications. As a result, the tetra-protonated derivative displays remarkable host properties towards polar neutral molecules and enantioselective recognition processes have been evidenced with chiral guests.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Impact of multiple cation-pi interactions upon calix[4]arene substrate binding and specificity

The cation-pi interaction influence on the conformation and binding of calix[4]arenes to alkali-metal cations has been studied using a dehydroxylated model. The model allows for the separation of cooperative cation-pi and electrostatic forces commonly found in the binding motifs found in calixarene complexes. Starting from the four well-known calix[4]arene conformations, six conformers for this dehydroxylated model (cone, partial cone, flattened cone, chair, 1,2-alternate, and 1,3-alternate) have been characterized by geometry optimization and frequency analysis using the Becke three-parameter exchange functional with the nonlocal correlation functional of Lee, Yang, and Parr and the 6-31G(d) basis set. Without the stabilization provided by the hydroxyl hydrogen bonds in calix[4]arene, neither the cone nor the 1,2-alternate conformation is computed to be a ground-state structure. The partial cone, flattened cone, chair, and 1,3-alternate conformers have been identified as ground-state structures in a vacuum, with the partial cone and the 1,3-alternate as the lowest energy minima in the aromatic model. The C(4)(v)() cone conformation is found to be a transition structure separating the flattened cone (C(2)(v)()) conformers. The energetic and structural preferences of the calix[4]arene model change dramatically when it is bound to Li(+), Na(+), and K(+). The number of pi-faces, the positioning of these pi-faces with respect to the cations, and the nature of the cation were studied as factors in the binding strength. A detailed study of the distances and angles between the aromatic ring centroids and the cations reveals the energetic advantages of multiple weak cation-pi interactions. The geometries are often far from the optimal cation-pi interaction in which the cation approaches in a perpendicular path the aromatic ring center, where the quadrupole moment is strongest. The results reveal that multiple weaker nonoptimal cation-pi interactions contribute significantly to the overall binding strength. This theoretical analysis underscores the importance of neighboring aromatic faces and provides new insight into the significance of cation-pi binding, not only for calix[4]arenes, but also for other supramolecular and biological systems.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.     

An inherently chiral calix[4]crown carboxylic acid in the partial cone conformation

We have designed and synthesized an inherently chiral calix[4]arene partial cone conformer, in which a crown-4 ether moiety, a carboxyl group, and a propyl group are convergent. Chemical resolution was achieved by use of (S)-BINOL as a chiral auxiliary. ¹H NMR titration data revealed that the title compound does not have the ability to differentiate both enantiomers of chiral amine and aminoalcohol guests. The approximately symmetric calix[4]arene skeleton of the partial cone conformer is presumed to be responsible for its undesirable chiral recognition ability.     

Acid-promoted rearrangement of carbonate functionality anchored to the lower rim of a Calix

A unique calix[4]arene lower-rim intramolecular rearrangement, resulting in molecular asymmetry arising from the upper- and lower-rim substitution pattern, produces a new class of inherently chiral calix[4]arenes in a partial cone conformation. This was aided by molecular rigidification arising from pi-pi and C-H.pi interactions between bulky lower-rim substituents, with the corresponding circular dichroism spectra exhibiting the most intense bisignate Cotton effects yet observed for calix[4]arenes not bearing a chiral center.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Calixarene-based surfactants: evidence of structural reorganization upon micellization

The self-aggregation of five amphiphilic p-sulfonatocalix[n]arenes bearing alkyl chains at the lower rim was investigated by NMR spectroscopy and electrical conductivity. The critical micelle concentration was determined, and the tendency of this special class of surfactants to self-aggregate in aqueous solution was analyzed as a function of the alkyl chain length and the number of aromatic units in the macrocyclic ring. The structure of the surfactants in the monomeric and micellized states was elucidated by means of (1)H NMR and, in the case of the calix[6]arene derivative, with 2D NMR experiments. While all amphiphilic calix[4]arenes studied here are blocked in the cone conformation, in the monomeric state the calix[6]arene adopts a pseudo-1,2,3-alternate conformation and the calix[8]arene is conformationally mobile. These calixarenes undergo an aggregation-induced conformational change, adopting the cone conformation in the micelles. The structure and size of the aggregates were studied by diffusion ordered spectroscopy (DOSY) experiments, and the results indicate that these surfactants self-assemble into ellipsoidal micelles.     

Cyclometalated complexes derived from calix[4]arene bisphosphites and their catalytic applications in cross-coupling reactions

Palladium and platinum dichloride complexes of a series of symmetrically and unsymmetrically substituted 25,26;27,28-dibridged p-tert-butyl-calix[4]arene bisphosphites in which two proximal phenolic oxygen atoms of p-tert-butyl- or p-H-calix[4]arene are connected to a P(OR) (R = substituted phenyl) moiety have been synthesized. The palladium dichloride complexes of calix[4]arene bisphosphites bearing sterically bulky aryl substituents undergo cyclometalation by C-C or C-H bond scission. An example of cycloplatinated complex is also reported. The complexes have been characterized by NMR spectroscopic and single crystal X-ray diffraction studies. During crystallization of the palladium dichloride complex of a symmetrically substituted calix[4]arene bisphosphite in dichloromethane, insertion of oxygen occurs into the Pd-P bond to give a P,O-coordinated palladium dichloride complex. The calix[4]arene framework in these bisphosphites and their metal complexes adopt distorted cone conformation; the cone conformation is more flattened in the metal complexes than in the free calix[4]arene bisphosphites. Some of these cyclometalated complexes proved to be active catalysts for Heck and Suzuki C-C cross-coupling reactions but, on an average, the yields are only modest.     

Intramolecular direct arylation in an A,C-functionalized calix[4]arene

A recently developed efficient method for intramolecular direct arylation is employed on a doubly functionalized calix[4]arene fixed in the cone conformation. The reaction takes place in high yield leading to meta substituted calix[4]arenes. The functionalities are located at two opposite aromatic rings and the two possible diastereomers are obtained in a 1:1 ratio. Full sets of data including crystal structures for both isomers are presented. The NMR data reveal that even at temperatures up to 120 degrees C both isomers are fixed in a flattened cone conformation with the substituted aromatic units pointing outwards.