Visible‐light‐sensitive photoredox catalysis by iron complexes: Applications in cationic and radical polymerization reactions

The development of iron complexes for the photoredox catalysis is a huge challenge. Indeed, Iron complexes can be ideal candidates due to their potential visible light absorption and redox properties but also because they are less toxic, inexpensive and environmentally friendly compared to other catalysts. In the present paper, a series of novel iron complexes have been synthesized and utilized to initiate the free radical promoted cationic polymerization of epoxides or the free radical polymerization of acrylates through photoredox catalysis processes upon exposure to near UV (385 nm) or visible violet (405 nm) light emitting diodes (LEDs). When combined with an iodonium salt and N‐vinylcarbazole, the iron complex‐based photoinitiating systems are able to generate radicals, cations, and radical cations. The initiation efficiency is investigated through real‐time Fourier transform infrared spectroscopy and a satisfactory initiating ability is found. The mechanisms for the generation of the reactive initiating species through photoredox catalysis are studied by different methods (steady state photolysis, cyclic voltammetry and electron spin resonance spin trapping techniques) and discussed in detail. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2247–2253     

Novel panchromatic photopolymerizable matrices: N,N'‐dibutylquinacridone as an efficient and versatile photoinitiator

N,N'‐dibutylquinacridone (DBQA) is utilized here for the first time as a high‐performance panchromatic photoinitiator for the cationic polymerization (CP) of epoxides, the free radical polymerization (FRP) of acrylates, the thiol‐ene polymerization and the synthesis of interpenetrated polymer networks (epoxide/acrylate) under violet, blue, green and yellow lights (emitted from LED at 405 nm, 470 nm, 520 nm, or 594 nm, or laser diode at 532 nm). It confers a panchromatic character to the photopolymerizable matrices. Remarkably, the proposed DBQA based photoinitiating systems exhibit quite excellent efficiency (the final monomer conversion for multifunctional monomers at room temperature can reach 62% and 50% in CP and FRP, respectively) and appear as much more powerful than the camphorquinone or Eosin‐Y containing reference systems for visible light. For green light, DBQA is much more reactive than the literature reference (Eosin‐Y) and for blue light, a good reactivity is found compared with camphorquinone. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1719–1727     

Visible light‐emitting diode‐sensitive thioxanthone derivatives used in versatile photoinitiating systems for photopolymerizations

Novel thioxanthone (TX) derivatives are used as versatile photoinitiators upon visible light‐emitting diode (LED; e.g., 405, 425, and 450 nm) exposure. The mechanisms for the photochemical generation of reactive species (i.e., cations and free radicals) produced from photoinitiating systems based on the photoinitiator and an iodonium salt, tris(trimethylsilyl)silane, or an amine, were studied by UV–vis spectroscopy, fluorescence, cyclic voltammetry, steady‐state photolysis, and electron spin resonance spin‐trapping techniques. The reactive species are particularly efficient for cationic, free radical, hybrid, and thiol‐ene photopolymerizations upon LED exposure. The optimized photoinitiating systems exhibit higher efficiency than those of reference systems (i.e., isopropyl TX‐based photoinitiating systems), especially in the visible range. According to their beneficial features, these photoinitiating systems have considerable potential in photocuring applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4037–4045     

A benzophenone‐naphthalimide derivative as versatile photoinitiator of polymerization under near UV and visible lights

A benzophenone‐naphthalimide derivative (BPND) bearing tertiary amine groups has been developed as a high‐performance photoinitiator in combination with 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine or an iodonium salt for both the free radical polymerization (FRP) of acrylates and the cationic polymerization (CP) of epoxides upon exposure to near UV and visible LEDs (385–470 nm). BPND can even produce radicals without any added hydrogen donor. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, electron spin resonance spin trapping, fluorescence, cyclic voltammetry and laser flash photolysis techniques. These novel BPND based photoinitiating systems exhibit an efficiency higher than that of the well‐known camphorquinone‐based systems (FRP and CP) or comparable to that of bis(2,4,6‐trimethylbenzoyl)‐phenylphosphineoxide (FRP at λ ≤ 455 nm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 445–451     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

N‐alkoxypyridinium salts as coinitiators in radical polymerization: Synthesis and Photochemical Properties

A few N‐alkoxypyridinium salts are developed as photoinitiators for efficient polymerization reactions. They are characterized by absorption properties below 300 nm, and generate alkoxy radicals on UV‐Vis light exposure. The squarylium dye was used as a blue‐light photosensitizer. Polymerization results are correlated with the photochemistry of N‐alkoxypyridinium salts. The quenching of the excited singlet state of squarylium dye by pyridinium salt and the formation of the semioxidized species of squaraine suggests an electron transfer from an excited dye to a coinitiator, and that the resulting oxygen‐centered radical initiates the polymerization process. The chemical mechanism was investigated by steady state photolysis and nanosecond laser flash photolysis experiments. Photoinitiating activity of new photoinitiators for initiation of polymerization of trimethylolpropane triacrylate in the UV‐blue light region was compared with photoinitiating ability of selected commercially available initiators. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2840–2850     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Radical and cationic photopolymerization: New pyrylium and thiopyrylium salt‐based photoinitiating systems

New thiopyrylium and pyrylium salt‐based photoinitiating systems for visible light induced free radical polymerization (FRP) or free radical promoted cationic polymerization (FRPCP) under visible lights are presented. The reaction mechanisms are investigated by laser flash photolysis and the structure/reactivity trend is discussed. The abilities of two different classes of coinitiators are investigated (thiols/disulfides and silanes). In FRP, upon irradiation with a xenon lamp (λ > 390 nm), the (thio)pyrylium salts in combination with thiols or disulfides lead to very high polymerization rates, compared to the reference eosin Y/methyldiethanolamine system. In FRPCP, silanes are found much better coinitiators: a high efficiency of the photopolymerization under air is noted. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7369–7375, 2008     

The cyanine dye/trichloromethyl‐1,3,5‐triazine/thiols in two‐ and three‐component photoinitiating systems for free radical polymerization

The new photoinitiating systems for free radical polymerization of multifunctional monomers composed of carbocyanine dye, 1,3,5‐triazine derivative and heteroaromatic mercaptan were described. It was shown, that the polymerization abilities of such photoinitiatng systems are comparable with those observed for well‐known cyanine borate two‐component photoinitiating systems. The fluorescence quenching rate constants of tested sensitizer was about 2 × 10¹⁰ M^?1s^?1. Basing on the results of laser flash photolysis, the mechanism of the photochemical reactions occuring in the three‐component photoinitiating system was proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4243–4251, 2010     

Dual roles for promoting monomers to polymers: A conjugated sulfonium salt photoacid generator as photoinitiator and photosensitizer in cationic photopolymerization

An efficient strategy for comprehensive utilization of the conjugated sulfonium salt photoacid generator (PAG), namely, 3‐{4‐[4‐(4‐N,N′‐diphenylamino)‐styryl]phenyl}phenyl dimethyl sulfonium hexafluoroantimonate, was developed through photoinitiated cationic photopolymerization (CP) of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 425 nm). Photochemical mechanisms were investigated by UV–vis spectra, molecular orbital calculations, fluorescence, cyclic voltammetry, and electron spin resonance spin‐trapping analyses. Compared with commercial PAGs, the prepared conjugated sulfonium salt generated H⁺, which can be used as photoinitiator. Moreover, the fluorescent byproducts from photodecomposition can be used as photosensitizer of commercial iodonium salt in the photoinitiating systems of CP. These novel D‐π‐A type sulfonium‐based photoinitiating systems are efficient (epoxide conversion = 85–90% and vinyl conversion >90%; LEDs upon exposure to 365–425 nm) even in low‐concentration initiators (1%, w/w) and low curing light intensities (10–40 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2722–2730     

Structure/reactivity/photoinitiation ability relationships in novel benzo pyrazolo (or imidazo) isoquinolinone derivatives upon visible light LEDs

Isoquinolinone derivatives bearing amino‐ or nitro‐ substituent (IQNs) have been synthesized as photoinitiators and combined with various additives (i.e., iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)?1,3,5‐triazine) to initiate ring‐opening cationic polymerizations (CP) or free radical polymerizations under exposure to visible LEDs (e.g., LEDs at 405 nm or 455 nm, or cold white LED) or a halogen lamp. Compared to the well‐known camphorquinone‐based systems, the novel IQNs‐based combinations employed here demonstrate higher efficiencies for the CP of epoxides. The photochemically generated reactive species (i.e., cations and radicals) from the IQNs‐based systems have been investigated by steady state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin trapping techniques. The structure/reactivity/photoinitiating ability relationships of IQNs‐based combinations are also discussed; the crucial role of the excited state lifetimes of the photoinitiators to ensure efficient quenching by additives is clearly underlined. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1806–1815     

One‐component thioxanthone‐based polymeric photoinitiators

The photochemical and photophysical properties of new polymeric photoinitiators (PPIs) containing pendant thioxanthone (TX) and amine moieties are studied. The PPIs are synthesized by copolymerization of tert‐butyl 2‐((9‐oxo‐9H‐thioxanthen‐2‐yloxy)methyl)acrylate (TX1) with N,N‐dimethylaminoethyl methacrylate (DMAEM) at two different ratios using free radical polymerization. UV–vis spectra indicate that PPIs possess similar absorption characteristics to TX1 in the violet range (～400 nm; absorption red‐shift 20 nm). The photochemical mechanisms are studied by electron spin resonance (ESR), steady state photolysis, laser flash photolysis, and cyclic voltammetry. ESR studies indicate formation of two different aminoalkyl radicals on the hydrogen donor amine. The triplet state of the PPIs is short‐lived compared to isopropyl thioxanthone and TX1, due to the built‐in amine functionality. Photopolymerization of trimethylolpropane triacrylate (TMPTA) initiated by these photoinitiators under LED exposure at 385 and 405 nm using real‐time FTIR spectroscopy shows that they exhibit higher efficiency than TX/N‐methyldiethanolamine (MDEA) and TX1/MDEA systems with the advantage of a much higher molecular weight that can be very helpful to overcome migration issues. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3370–3378     

Copper and iron complexes as visible‐light‐sensitive photoinitiators of polymerization

The utilization of visible lights for the fabrication of polymeric materials is recognized as a promising and environmentally friendly approach. This process relies on the photochemical generation of reactive species (e.g., radicals, radical cations, or cations) from well‐designed photoinitiators (PIs) or photoinitiating systems (PISs) to initiate the polymerization reactions of different monomers (acrylates, methacrylates, epoxides, and vinyl ethers). In spite of the fact that metal complexes such as ruthenium‐ or iridium‐based complexes have found applications in organic and polymer synthesis, the search of other low‐cost metal‐based complexes as PISs is emerging and attracting increasing attentions. Particularly, the concept of the photoredox catalysis has appeared recently as a unique tool for polymer synthesis upon soft conditions (use of light emitting diodes and household lamp). This highlight focuses on recently designed copper and iron complexes as PI catalysts in the application of photoinduced polymerizations (radical, cationic, interpenetrated polymer networks, and thiol‐ene) or controlled radical polymerization under visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2673–2684     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Iron complexes as photoinitiators for radical and cationic polymerization through photoredox catalysis processes

Six iron complexes (FeCs) with various ligands have been designed and synthesized. In combination with additives (e.g., iodonium salt, N‐vinylcarbazole, amine, or chloro triazine), the FeC‐based systems are able to efficiently generate radicals, cations, and radical cations on a near UV or visible light‐emitting diode (LED) exposure. These systems are characterized by an unprecedented reactivity, that is, for very low content 0.02% FeC‐based systems is still highly efficient in photopolymerization contrary to the most famous reference systems (Bisacylphosphine oxide) illustrating the performance of the proposed catalytic approach. This work paves the way for polymerization in soft conditions (e.g., on LED irradiation). These FeC‐based systems exhibit photocatalytic properties, undergo the formation of radicals, radical cations, and cations and can operate through oxidation or/and reduction cycles. The photochemical mechanisms for the formation of the initiating species are studied using steady state photolysis, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 42–49     

Iodonium‐polyoxometalate and thianthrenium‐polyoxometalate as new one‐component UV photoinitiators for radical and cationic polymerization

Four novel onium salts (onium‐polyoxometalate) have been synthesized and characterized. They contain a diphenyliodonium or a thianthrenium (TH) moiety and a polyoxomolybdate or a polyoxotungstate as new counter anions. Outstandingly, these counter anions are photochemically active and can sensitize the decomposition of the iodonium or TH moiety through an intramolecular electron transfer. The phenyl radicals generated upon UV light irradiation (Xe–Hg lamp) are very efficient to initiate the radical polymerization of acrylates. Cations are also generated for the cationic polymerization of epoxides. Remarkably, these novel iodonium and TH salts are characterized by a higher reactivity compared with that of the diphenyliodonium hexafluorophosphate and the commercial TH salt, respectively. Interpenetrating polymer networks can also be obtained under air through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend (monomer conversions > 65%). The photochemical mechanisms are studied by steady‐state photolysis, cyclic voltammetry, and electron spin resonance techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 981–989