Mo(W)/Cu/S cluster-based supramolecular arrays assembled from preformed clusters [Et4N]4[WS4Cu4I6] and [(n-Bu)4N]2[MoOS3Cu3X3] (X = I, SCN) with flexible ditopic ligands

In our working toward the rational design and synthesis of cluster-based supramolecular architectures, a set of new [WS4Cu4]- or [MoOS3Cu3]-based supramolecular assemblies have been prepared from reactions of preformed cluster compounds [Et4N]4[WS4Cu4I6] (1) and [(n-Bu)4N]2[MoOS3Cu3X3] (2, X = I; 3, X = SCN) with flexible ditopic ligands such as dipyridylsulfide (dps), dipyridyl disulfide (dpds), and their combinations with dicyanamide (dca) anion and 4,4'-bipy. The cluster precursor 1 reacted with dps or dpds and sodium dicyanamide (dca) in MeCN to produce [WS4Cu4I2(dps)3].2MeCN (4.2MeCN) and [WS4Cu4(dca)2(dpds)2].Et2O.2MeCN (5.Et2O.2MeCN), respectively. On the other hand, treatment of 2 with dpds in DMF/MeCN afforded [MoOS3Cu3I(dpds)2].0.5DMF.2(MeCN)0.5 (6.0.5DMF.2(MeCN)0.5) while reaction of 3 with sodium dicyanamide (dca) and 4,4'-bipy in DMF/MeCN gave rise to [MoOS3Cu3(dca)(4,4'-bipy)1.5].DMF.MeCN (7.DMF.MeCN). Compounds 4.2MeCN, 5.Et2O.2MeCN, 6.0.5DMF.2(MeCN)0.5, and 7.DMF.MeCN have been characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray crystallography. Compound 4 contains a 2D layer array made of the saddle-shaped [WS4Cu4] cores interlinked by three pairs of Cu-dps-Cu bridges. Compound 5 has another 2D layer structure in which the [WS4Cu4] cores are held together by four pairs of Cu-dca-Cu and Cu-dpds-Cu bridges. Compound 6 displays a 1D spiral chain structure built of the nido-like [MoOS3Cu3] cores via two pairs of Cu-dpds-Cu bridges. Compound 7 consists of a 2D staircase network in which each [MoOS3Cu3(4,4'-bipy]2 dimeric unit interconnects with four other equivalent units by a pair of 4,4'-bipy ligands and two pairs of dca anions. The [WS4Cu4] core in 4 or 5 and the [MoS3Cu3] core in 7 show a planar 4-connecting node and a seesaw-shaped 4-connecting node, respectively, which are unprecedented in cluster-based supramolecular compounds. The successful assembly of 4-7 from the three cluster precursors 1-3 through flexible ditopic ligands provides new routes to the rational design and construction of complicated cluster-based supramolecular arrays.     

Preparation of mononuclear tungsten tris(sulfido) and molybdenum sulfido-tetrasulfido complexes with hydridotris(pyrazolyl)borate coligand and conversion of the former into sulfido-bridged bimetallic complex having Pt(mu-S)2WS core

Treatment of [Et4N][(Me2Tp)W(CO)3] (Me2Tp = HB(3,5-dimethylpyrazol-1-yl)3) with S8 in DMF at room temperature afforded a tris(sulfido) complex [Et4N][(Me2Tp)WS3] (1a), while that of [Et4N][TpW(CO)3] (Tp = HB(pyrazol-1-yl)3) in MeCN resulted in the formation of [Et4N][TpWS3] (1b) along with [Et4N]2[[WO(S2)2]2(mu-S)] (6) as a byproduct. Under similar conditions, [Et4N][(Me2Tp)Mo(CO)3] gave a mixture of a sulfido-tetrasulfido complex [Et4N][(Me2Tp)MoS(S4)] (2a) and its monooxo analogue [Et4N][(Me2Tp)MoO(S4)], although a sulfido-tetrasulfido complex [Et4N][TpMoS(S4)] (2b) was exclusively obtained from [Et4N][TpMo(CO)3]. The reaction of 1a with [PtCl2(cod)] (cod = 1,5-cyclooctadiene) in MeCN at room temperature led to the formation of a sulfido-bridged mixed-metal complex [Et4N][(Me2Tp)WS(mu-S)2PtCl2] (10). The structures of new complexes have been determined in detail by the X-ray analyses for 1a.MeCN, 1b, 2a, 2b, 6, and 10.     

Tri- and pentanuclear tungsten-(mu-S)-M clusters (M = W, Cu, Ag)

The thiotungstate [Et4N]2[OW(WS4)2], [Et4N]2.1, containing the linear [[S2W(VI)(mu-S)2]2W(IV)=O] core, was prepared from [Et4N]2[WS4] in the presence of the sulfide scavenger Cd2+. Addition of 1,2-bis(o-diphenylphosphinophenyl)ethane (diphosphine) and Cu+ or Ag+ to solutions of 1 in MeCN/DMF led to coordination of the (diphosphine)Cu/Ag fragments to the terminal sulfido ligands of 1, yielding novel linear pentanuclear, heterometallic clusters [mu-[OW(IV)(DMF)(W(VI)S4)2][M(diphosphine)]2], 2 (M = Cu) and 3 (M = Ag). Along with 2, the trinuclear cluster [[mu-(W(VI)S4)[Cu(diphosphine)(2)]], 4, was also obtained. The molecular and crystal structures of [Et4N]2.1, 2.MeCN, 3.MeCN, and 4.2MeCN.CH2Cl2 have been determined.     

Synthesis and X-ray structure of the [{Fe3(CO)9(micro3-O)}2H]3- trianion: dimerization of a metal carbonyl cluster via formation of an exceptionally short hydrogen bond

The synthesis, structure and characterization of the [{Fe3(CO)9(micro3-O)}2H]3- trianion in its [Cs(THF)0.33]+ and [NEt4]+ salt are reported. The title dimeric cluster has been obtained by protonation in water or in organic solvent of the [Fe3(CO)9(micro3-O)]2- dianion to the hydroxo [Fe3(CO)9(micro3-OH)]- derivative and crystallization. The solid state structure of [Cs(THF)0.33]3[{Fe3(CO)9(micro3-O)}2H] is based on ionic packing of [Cs(THF)0.33]+ cations and [{Fe3(CO)9(micro3-O)}2H]3- trianions. The fractional formula is due to the particular packing of Cs+ cations, which are at the vertices of fused cuboctahedral and trigonal antiprismatic polyhedrons. Each cuboctahedron encapsulates a [{Fe3(CO)9(micro3-O)}2H]3- trianion, whereas each trigonal antiprism encapsulates a THF molecule. The possibility that the structure of the [{Fe3(CO)9(micro3-O)}2H]3- trianion could be affected by its confinement in the cuboctahedral cage of Cs+ ions and the heavy disorder of the THF molecule urged a further structural determination of the trianion with a completely different cation. The corresponding [NEt4]3[{Fe3(CO)9(micro3-O)}2H] salt has been, therefore, prepared and structurally characterized. The [{Fe3(CO)9(micro3-O)}2H]3- trianion displays an identical structure and almost coincident molecular parameters in both salts. Its most notable feature is represented by the unique hydrogen atom symmetrically bridging the micro3-O atoms of two different [Fe3(CO)9(micro3-O)]2- molecules and displaying one of shortest O...H...O interaction so far reported in organic, inorganic and organometallic literature. The structure of [Cs(THF)]2[Fe4(CO)13], which has been obtained as a by-product of the synthesis of [Cs(THF)0.33]3[{Fe3(CO)9(micro3-O)}2H], is also briefly reported.     

Multi-dimensional transition-metal coordination polymers of 4,4'-bipyridine-N,N'-dioxide: 1D chains and 2D sheets

Reaction of 4,4'-bipyridine -N, N' -dioxide (L) with a variety of transition-metal salts in MeOH affords a range of coordination polymer products. For the complexes [FeCl 3(mu-L)] infinity, 1, and ([Cu(L) 2(OHMe) 2(mu-L)].2PF 6. n(solv)) infinity, 2, 1D chain structures are observed, whereas ([Mn(mu-L) 3].2ClO 4) infinity, 3, and ([Cu(mu-L) 3].2BF 4) infinity, 4, both show 2D sheet architectures incorporating an unusual 3 (6)- hxl topology. The more common 4 (4)- sql topology is observed in [Cd(ONO 2) 2(mu-L) 2] infinity, 5, ([Cu(OHMe) 2(mu-L) 2].2ZrF 5) infinity, 6, ([Cu(L) 2(mu-L) 2].2EF 6) infinity ( 7 E = P; 8 E = Sb), and ([Et 4N][Cu(OHMe) 0.5(mu-L) 2(mu-FSiF 4F) 0.5].2SbF 6. n(solv)) infinity, 9. In 6, the [ZrF 5] (-) anion, formed in situ from [ZrF 6] (2-), forms 1D anionic chains ([ZrF 5] (-)) infinity of vertex-linked octahedra, and these chains thread through a pair of inclined polycatenated ([Cu(OHMe) 2(mu-L) 2] (2+)) infinity 4 (4)- sql grids to give a rare example of a triply intertwined coordination polymer. 9 also shows a 3D matrix structure with 4 (4)- sql sheets of stoichiometry ([Cu(L) 2] (2+)) infinity coordinatively linked by bridging [SiF 6] (2-) anions to give a structure of 5-c 4 (4).6 (6)- sqp topology. The mononuclear [Cu(L) 6].2BF 4 ( 10) and [Cd(L) 6].2NO 3 ( 11) and binuclear complexes [(Cu(L)(OH 2)) 2(mu-L) 2)].2SiF 6. n(solv), 12, are also reported. The majority of the coordination polymers are free of solvent and are nonporous. Thermal treatment of materials that do contain solvent results in structural disintegration of the complex structures giving no permanent porosity.     

Carbon dioxide fixation by an unprecedented hydroxo lead-chromium carbonyl complex: synthesis, reactivity, and theoretical calculations

The novel hydroxo-bridged dimeric lead-chromium carbonyl complex [Et4N]2[{PbCr2(CO)10}2(mu-OH)2] ([Et4N]2[1]) was synthesized from the reaction of PbCl2 and Cr(CO)6 followed by metathesis with [Et4N]Br in a KOH/MeOH solution. The X-ray crystallographic structure shows that dianion 1 consists of two Pb{Cr(CO)5}2 units bridged by two hydroxo fragments in which the Pb atoms are further coordinated with two Cr(CO)5 groups, resulting in a distorted tetrahedral geometry. A CO2 molecule can insert itself into dianion 1 to form two new carbonate complexes, [Et(4)N]2[{PbCr2(CO)10}(CO3)] ([Et4N]2[2]) and [Et4N]2[{PbCr2(CO)10}2(CO3)] ([Et4N]2[3]), depending on the reaction conditions. In addition, complex 2 can be transformed into 3 in CH2Cl2 solution at an elevated temperature. While the carbonate group in dianion 2 is bonded to one Pb atom, which is coordinated with two Cr(CO)5 fragments, the carbonate group in 3 bridges the two Pb centers in a mu-1kappa2OO':2kappa2OO' fashion in which each Pb atom is further bonded to two Cr(CO)5 moieties. Complexes 2 and 3 can be converted back the hydroxo complex 1 under appropriate conditions. All three unprecedented lead-chromium compounds, 1-3, were fully characterized by spectroscopic methods and single-crystal X-ray diffraction analyses. The nature and formation of complexes 1-3 were also examined by molecular orbital calculations using the B3LYP method of the density functional theory.     

Structural models of the bimetallic subunit at the A-cluster of acetyl coenzyme a synthase/CO dehydrogenase: binuclear sulfur-bridged Ni-Cu and Ni-Ni complexes and their reactions with CO

The Ni(II)-dicarboxamido-dithiolato complexes (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) were used as Nid metallosynthons in the construction of higher nuclearity dinuclear Ni-Cu and Ni-Ni species to model the bimetallic Mp-Nid site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase (ACS/CODH). Reaction of 1 with [Cu(neo)Cl] and [Ni(terpy)Cl2] in MeCN affords the dinuclear complexes (Et4N)[Cu(neo)Ni(NpPepS)] (3) and [Ni(terpy)Ni(NpPepS)] (4), respectively. Reaction of 2 with [Ni(dppe)Cl2] in MeCN yields [Ni(dppe)Ni(PhPepS)] (6). The Ni-Cu complex 3 exhibits no redox chemistry at the Nid site and no reaction with CO. In contrast, the Nip sites in 4 and 6 are readily reduced (characterized by their Ni(I) EPR spectra) and bind CO, exhibiting nuco bands at 2044 and 1997 cm-1, respectively, indicating terminal CO binding. The present Ni-Ni systems replicate the structural and chemical properties of the A-cluster site in ACS/CODH and support the presence of Ni at Mp in the catalytically active enzyme.     

Lanthanide-transition-metal carbonyl complexes: new [Co4(CO)11]2- clusters and lanthanide(II) isocarbonyl polymeric arrays

Two types of Ln(II)-Co(4) isocarbonyl polymeric arrays, [(Et(2)O)(3)(-)(x)()(THF)(x)()Ln[Co(4)(CO)(11)]]( infinity ) (1-3; x = 0, 1) and [(THF)(5)Eu[Co(4)(CO)(11)]]( infinity ) (4), were prepared and structurally characterized. Transmetalation involving Ln(0) and Hg[Co(CO)(4)](2) in Et(2)O yields [(Et(2)O)(3)Ln[Co(4)(CO)(11)]]( infinity ) (1, Ln = Yb; 2, Ln = Eu). Dissolution of the solvent-separated ion pairs [Ln(THF)(x)()][Co(CO)(4)](2) (Ln = Yb, x = 6; Ln = Eu) in Et(2)O affords [(Et(2)O)(2)(THF)Yb[Co(4)(CO)(11)]]( infinity ) (3) and [(THF)(5)Eu[Co(4)(CO)(11)]]( infinity ) (4). In these reactions, oxidation and condensation of the [Co(CO)(4)](-) anions result in formation of the new tetrahedral cluster [Co(4)(CO)(11)](2)(-). The two types of Ln(II)-Co(4) compounds contain different isomers of [Co(4)(CO)(11)](2)(-), and, consequently, the structures of the infinite isocarbonyl networks are distinct. The cluster in [(Et(2)O)(3)(-)(x)()(THF)(x)()Ln[Co(4)(CO)(11)]]( infinity ) (1-3) possesses pseudo C(3)(v)() symmetry (an apical Co, three basal Co atoms; one face-bridging, three edge-bridging, seven terminal carbonyls) and connects to Ln(II) centers through eta(2),micro(4)- and eta(2),micro(3)-carbonyls to generate a 2-D puckered sheet. In contrast, [(THF)(5)Eu[Co(4)(CO)(11)]]( infinity ) (4) incorporates a C(2)(v)() symmetric cluster (two unique Co environments; two face-bridging, one edge-bridging, eight terminal carbonyls), and isocarbonyl linkages (eta(2),micro(4)-carbonyls) to Eu(II) atoms create a 1-D zigzag chain. Complexes 1-4 contain the first reported eta(2),micro(4)-CO bridges between a Ln and a transition-metal carbonyl cluster. Infrared spectroscopic studies revealed that the isocarbonyl associations to Ln(II) persist in solution. The solution structure and dynamic behavior of the [Co(4)(CO)(11)](2)(-) cluster in 1 was investigated by variable-temperature (59)Co and (13)C NMR spectroscopies.     

Lanthanide-transition metal carbonyl complexes: condensation of solvent-separated ion-pair compounds into extended structures

New solvent-separated ion-pair compounds and extended structures containing ytterbium(II)-transition metal isocarbonyl linkages were synthesized. [Yb(THF)6][M(CO)5]2 (1, M = Mn; 2, M = Re) were prepared via transmetalation reactions between Yb metal and Hg[M(CO)5]2 in THF. Reflux of 1 in Et2O afforded {Yb(THF)2(Et2O)2[(mu-CO)2Mn(CO)3]2}infinity (3) which is a sheet-layer structure. In ether solution, 3 is converted to {Yb(THF)4[(mu-CO)2Mn(CO)3]2}infinity (4) which has a linear structure. In both 3 and 4, ytterbium is 8-coordinated (distorted square antiprism geometry), four coordination sites occupied by molecules of solvent and four more by oxygen atoms of isocarbonyl linkages. The [Mn(CO)5]- anion has trigonal bipyramidal geometry and is linked to ytterbium through two equatorial carbonyls. The formation of two minor products, (THF)2Mn3(CO)10 (5) and [(THF)5Yb(mu-CO)Mn3(CO)13][Mn3(CO)14] (6), was observed during condensation of 1 into 3 and 4.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Syntheses, characterization, and dioxygen reactivities of Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives: a Cu(III)2O2 intermediate exhibiting higher C-H activation

Six Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives (R3CY, R = Et, iBu, and Bn), [Cu(MeCN)(Et3CY)]SbF6 (1), [Cu(MeCN)(iBu3CY)]SbF6 (2), [Cu(MeCN)(Bn3CY)]SbF6 (3), [Cu(CO)(Et3CY)]SbF6 (4), [Cu(CO)(iBu3CY)]SbF6 (5), and [Cu(CO)(Bn3CY)]SbF6 (6), were prepared to probe the ability of copper complexes to effectively catalyze oxygenation reactions. The complexes were characterized by elemental analysis, electrochemical and X-ray structure analyses, electronic absorption spectroscopy, IR spectroscopy, 1H NMR spectroscopy, and ESI mass spectrometry. The crystal structures of 1-3 and 6 and the CO stretching vibrations (nuCO) of 4-6 demonstrate that the ability of R3CY to donate electron density to the Cu(I) atom is stronger than that of the previously reported ligands, 1,4,7-triazacyclononane (R3TACN) and 1,4,7-triazacyclodecane (R3TACD). Reactions of complexes 1-3 with dioxygen in THF or CH2Cl2 at -105 to -80 degrees C yield bis(mu-oxo)dicopper(III) complexes 7-9 as intermediates as confirmed by electronic absorption spectroscopy and resonance Raman spectroscopy. The Cu-O stretching vibrations, nu(Cu-O) for 7 (16O2: 553, 581 cm-1and 18O2: 547 cm-1) and 8 (16O2: 571 cm-1 and 18O2: 544 cm-1), are observed in a lower energy region than previously reported for bis(micro-oxo) complexes. The decomposition rates of complexes 7-9 in THF at -90 degrees C are 2.78 x 10-4 for 7, 8.04 x 10-4 for 8, and 3.80 x 10-4 s-1 for 9. The decomposition rates of 7 and 8 in CH2Cl2 were 5.62 x 10-4 and 1.62 x 10-3 s-1, respectively, and the thermal stabilities of 7-9 in CH2Cl2 are lower than the values measured for the complexes in THF. The decomposition reactions obeyed first-order kinetics, and the H/D isotope experiments for 8 and 9 indicate that the N-dealkylation reaction is the rate-determining step in the decomposition processes. On the other hand, the decomposition reaction of 7 in THF results in the oxidation of THF (acting as an exogenous substrate) to give 2-hydroxy tetrahydrofuran and gamma-butyrolactone as oxidation products. Detailed investigation of the N-dealkylation reaction for 8 by kinetic experiments using N-H/D at -90 degrees C showed a kinetic isotope effect of 1.25, indicating that a weak electrostatic interaction between the N-H hydrogen and mu-oxo oxygen contributes to the major effect on the rate-determining step of N-dealkylation. X-ray crystal structures of the bis(micro-hydroxo)dicopper(II) complexes, [Cu2(OH)2(Et3CY)2](CF3SO3)2 (10), [Cu2(OH)2(iBu3CY)2](CF3SO3)2 (11), and [Cu2(OH)2(Bn3CY)2](ClO4)2 (12), which have independently been prepared as the final products of bis(micro-oxo)dicopper(III) intermediates, suggest that an effective interaction between N-H and mu-oxo in the Cu(III)2(micro-O)2 core may enhance the oxidation ability of the metal-oxo species.     

Oxo- and imidovanadium complexes incorporating methylene- and dimethyleneoxa-bridged calix[3]- and -[4]arenes: synthesis, structures and ethylene polymerisation catalysis

Reaction of [V(X)(OR)3] (X=O, Np-tolyl; R=Et, nPr or tBu) with p-tert-butylhexahomotrioxacalix[3]areneH3, LH3, affords the air-stable complexes [{V(X)L}n] (X=O, n=1 (1); X=Np-tolyl, n=2 (2)). Alternatively, 1 is readily available either from interaction of [V(mes)3THF] with LH3, and subsequent oxidation with O2 or upon reaction of LLi3 with [VOCl3]. Reaction of [V(Np-tolyl)(OtBu)3] with 1,3-dimethylether-p-tert-butylcalix[4]areneH2, Cax(OMe)2(OH)2, afforded [{VO(OtBu)}2(mu-O)Cax(OMe)2(O)2].2 MeCN (42 MeCN), in which two vanadium atoms are bound to just one calix[4]arene ligand; the n-propoxide analogue of 4, namely [{VO(OnPr)}2(mu-O)Cax(OMe)2(O)2].1.5 MeCN (51.5 MeCN), has also been isolated from a similar reaction using [V(O)(OnPr)3]. Reaction of [VOCl3], LiOtBu, (Me3Si)2O and Cax(OMe)2(OH)2 gave [{VO(OtBu)Cax(OMe)2(O)2}2Li4O2].8 MeCN (68 MeCN), in which an Li4O4 cube (two of the oxygen atoms are derived from the calixarene ligands) is sandwiched between two Cax(OMe)2(O)2. The reaction between [V(Np-tolyl)(OtBu)3] and Cax(OMe)2(OH)2, afforded [V(Np-tolyl)(OtBu)2Cax(OMe)2(O)(OH)]5 MeCN (75 MeCN), in which two tert-butoxide groups remain bound to the tetrahedral vanadium atom, which itself is bound to the calix[4]arene through only one phenolic oxygen atom. Reaction of p-tert-butylcalix[4]areneH4, Cax(OH)4 and [V(Np-tolyl)(OnPr)3] led to loss of the imido group and formation of the dimeric complex [{VCax(O)4(NCMe)}2].6 MeCN (86 MeCN). Monomeric vanadyl oxo- and imidocalix[4]arene complexes [V(X)Cax(O)3(OMe)(NCMe)] (X=O (11), Np-tolyl (12)) were obtained by the reaction of the methylether-p-tert-butylcalix[4]areneH3, Cax(OMe)(OH)3, and [V(X)(OR)3] (R=Et or nPr). Vanadyl calix[4]arene fragments can be linked by the reaction of 2,6-bis(bromomethyl)pyridine with Cax(OH)4 and subsequent treatment with [VOCl3] to afford the complex [{VOCax(O)4}2(mu-2,6-(CH2)2C5H3N)].4 MeCN (134 MeCN). The compounds 1-13 have been structurally characterised by single-crystal X-ray diffraction. Upon activation with methylaluminoxane, these complexes displayed poor activities, however, the use of dimethylaluminium chloride and the reactivator ethyltrichloroacetate generates highly active, thermally stable catalysts for the conversion of ethylene to, at 25 degrees C, ultra-high-molecular-weight (>5, 500,000), linear polyethylene, whilst at higher temperature (80 degrees C), the molecular weight of the polyethylene drops to about 450,000. Using 1 and 2 at 25 degrees C for ethylene/propylene co-polymerisation (50:50 feed) leads to ultra-high-molecular-weight (>2,900,000) polymer with about 14.5 mol% propylene incorporation. The catalytic systems employing the methyleneoxa-bridged complexes 1 and 2 are an order of magnitude more active than the bimetallic complexes 5 and 13, which, in turn, are an order of magnitude more active than pro-catalysts 8, 11 and 12. These differences in activity are discussed in terms of the structures of each class of complex.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Construction of halide-bridged tungsten-copper-sulfide double cubanelike clusters from a new precursor [(Tp*WS2)2(μ-S2)

Treatment of [Et(4)N][Tp*WS(3)] (1) (Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate) with 2 equiv of AgSCN in MeCN afforded a novel neutral compound [(Tp*WS(2))(2)(μ-S(2))] (2). Reactions of 2 with excess CuX (X = Cl, Br, I) in MeCN and CH(2)Cl(2) or CHCl(3) formed three neutral W/Cu/S clusters [{Tp*W(μ(3)-S)(3)Cu(3)(μ-Cl)}(2)Cu(μ-Cl)(2)(μ(7)-Cl)(MeCN)](2) (3), [{Tp*W(μ(3)-S)(3)Cu(3)}(2)Br(μ-Br)(2)(μ(4)-Br)(MeCN)] (4), and [{Tp*W(μ(3)-S)(3)Cu(3)}(2){Cu(2)(μ-I)(4)(μ(3)-I)(2)}] (5), respectively. On the other hand, treatment of 2 with CuX (X = Cl, Br) in the presence of Et(4)NX (X = Cl, Br) produced two anionic W/Cu/S clusters [Et(4)N][{Tp*W(μ(3)-S)(3)Cu(3)X}(2)(μ-X)(2)(μ(4)-X)] (6: X = Cl; 7 X = Br). Compounds 2-7 were characterized by elemental analysis, IR, UV-vis, (1)H NMR, electrospray ionization (ESI) mass spectra, and single-crystal X-ray crystallography. The dimeric structure of 2 can be viewed as two [Tp*WS(2)] fragments in which two W atoms are connected by one S(2)(2-) dianion. Compounds 3-7 all possess unique halide-bridged double cubanelike frameworks. For 3, two [Tp*W(μ(3)-S)(3)Cu(3)](2+) dications are linked via a μ(7)-Cl(-) bridge, two μ-Cl(-) bridges, and a [Cu(MeCN)(μ-Cl)(2)](+) bridge. For 4, one [Tp*W(μ(3)-S)(3)Cu(3)(MeCN)](2+) dication and one [Tp*W(μ(3)-S)(3)Cu(3)Br](+) cation are linked via a μ(4)-Br(-) and two μ-Br(-) bridges. For 5, the two [Tp*W(μ(3)-S)(3)Cu(3)](2+) dications are bridged by a linear [(μ-I)(2)Cu(μ(3)-I)(2)Cu(μ-I)(2)](4+) species. For 6 and 7, two [Tp*W(μ(3)-S)(3)Cu(3)X](+) cations are linked by a μ(4)-X(-) and two μ-X(-) bridges (X = Cl, Br). In addition, the third-order nonlinear optical (NLO) properties of 2-7 in MeCN/CH(2)Cl(2) were investigated by using femtosecond degenerate four-wave mixing (DFWM) technique.     

Syntheses and Crystal Structures of Two Heterobimetallic Clusters [WOS_3Cu_3I(dmpzm)_2]·2(MeCN)_(0.5) and [WS_4Cu_4I_2(dmpzm)_2]·DMF(dmpzm=Bis(3,5-dimethylpyrazolyl)methane)

The reaction of [Et4N]2WOS3 with three equiv.of CuI and dmpzm in MeCN afforded [WOS3Cu3I(dmpzm)2]·2(MeCN)0.5(1·2(MeCN)0.5) while that of [PPh4]2WS4 with four equiv.of CuI in DMF/MeCN followed by the addition of two equiv.of dmpzm in MeOH gave rise to [WS4Cu4I2(dmpzm)2]·DMF(2·DMF).Both compounds were characterized by elemental analysis,IR,and single-crystal X-ray diffraction analysis.1·2(MeCN)0.5 crystallizes in triclinic,space group P1-with a = 11.4552(5),b = 11.6735(3),c = 16.2278(9) ,α = 99.537(9),β = 101.986(2),γ = 118.464(13)o,V = 1775.5(3)3,Z = 2,μ = 6.080 mm-1,Dc = 1.983 Mg/m3,T = 193(2) K,C24H35Cu3IN9OS3W,Mr = 1063.22,F(000) = 1018,S = 1.060,R = 0.0376 and wR = 0.0870.2·DMF belongs to the orthorhombic system,space group Pmn21 with a = 22.145(4),b = 11.464(2),c = 7.7370(15) ,V = 1964.2(6)3,Z = 2,μ = 6.865 mm-1,Dc = 2.189 Mg/m3,T = 193(2) K,C25H39Cu4I2N9OS4W,Mr = 1301.72,F(000) = 1226,R = 0.0632,wR = 0.1706 and S = 1.130.1·2(MeCN)0.5 consists of one CuI and two [Cu(dmpzm)]+ fragments that are linked by [WOS3]2-species via six Cu-S bonds,forming a nido-like [WS3Cu3] core.2·DMF contains a saddle-shaped [WS4Cu4] core with two iodides coordinated at two Cu centers in a cis position and two dmpzm ligands being chelated at another two Cu centers in a cis position.     

Arylphosphanide complexes of the alkaline-earth metals magnesium, calcium, strontium, and barium of the formula (THF)nM[P(H)Ph]2 and formation of potassium diphenylphosphinomagnesiates

The reaction of diethylmagnesium with diphenylphosphane yields [(THF)Mg(Et)PPh 2] infinity ( 1; THF = tetrahydrofuran) with bridging PPh 2 ligands and average Mg-P bond lengths of 262.2 pm. The metalation reaction of MgEt 2 with HPPh 2 and H 2PPh with a 1:2 stoichiometry gives [(THF) 4Mg(PPh 2) 2] ( 2) and [(THF) 6Mg 4{P(H)Ph} 8] ( 3), respectively. Tetranuclear 3 contains three chemically different phenylphosphanide groups with characteristic P-H stretching frequencies at 2261, 2286, and 2310 cm (-1). The metathesis reaction of potassium phenylphosphanide with CaI 2 yields oligomeric (THF) 3Ca[P(H)Ph] 2 ( 4). A similar reaction with SrI 2 and BaI 2 gives polymeric [(THF) 2Sr{P(H)Ph} 2] infinity ( 5) and [(THF)Ba{P(H)Ph} 2] infinity ( 6), respectively, showing one stretching frequency at 2285 cm (-1). These compounds crystallize polymeric with bridging phenylphosphanide substituents. The addition of Et 2O to a mixture of KPPh 2 and Mg(PPh 2) 2 in THF initiates the crystallization of (Et 2O)K[(THF)Mg(PPh 2) 3] ( 7) with a strand structure and (Et 2O) x(THF) yK 2[Mg(PPh 2) 4] ( 8) with a layer structure depending on the stoichiometry. The crystals of 8 easily lose THF and Et 2O and, therefore, the content of these ethers varies. Recrystallization of 8 from hot 1,4-dioxane (diox) yields (diox) 2K 2[Mg(PPh 2) 4] ( 9) with a layer structure comparable to that of 8. The central structural units are eight-membered K 2Mg 2P 4 rings that are interconnected by P-K-P bridges. In a THF solution, the magnesiates 7- 9 dissociate into the homometallic derivatives KPPh 2 and Mg(PPh 2) 2, as can be seen from NMR experiments.     

Organo-tricyanoborates as tectons: illustrative coordination polymers based on copper(I) derivatives

The first systematic study on the use of tricyanoborates as ligands is presented. The tricyanoborates [RB(CN)3]- (R = oct and Ph) can be prepared by direct cyanation of RBCl2 precursors as well as by thermolysis of the corresponding isocyanides [RB(NC)3]-. The first organo-cyanogallates [RGa(CN)3]- (R = Bu, C6H2-2,4,6-Me3) were prepared from the corresponding dichloride, the structure of Et4N[mesGa(CN3] being confirmed crystallographically. The reaction of equimolar [RB(CN)3]- (R = oct, Ph) and [Cu(MeCN)4]+ afforded two-dimensional polymers [RB(CN)3Cu(NCMe)]. The sheets arise via conjoined hexagonal B3Cu3(CN)6 rings with chair conformations. The reaction of excess [PhB(CN)3]- and [Cu(MeCN)4]+ gives the polymer [K(18-crown-6)]{Cu[PhB(CN)3]2}. Treatment of [PhB(CN)3]- with [Cu(PCy3)2(NCMe)x]PF6 gave the one-dimensional polymer [PhB(CN)3Cu(PCy3)2], wherein two of the three BCN substituents are coordinated.     

Structure of organic and metal-organic networks based on a bifunctional m-terphenyl carboxylic acid

A series of metal-organic frameworks (MOFs) based upon the ligand 2,6-diphenyl-1,4-dibenzoic acid [Ph2C6H2(CO2H)2]infinity have been prepared and characterized by X-ray crystallography. The networks exhibit a variety of topologies and coordination modes at the metal center. The reaction of the ligand with cobalt(II) nitrate or zinc(II) nitrate in methanol/pyridine results in the formation of isostructural 1-D chains [(Ph2C6H2(CO2)2)M(py)2(MeOH)]infinity, where M = Zn, Co; however, in the presence of ethanol and triethylamine, Zn(NO3)2 reacts to form a 2-D clay-like network, [(Ph2C6H2(CO2)2)Zn(EtOH)2]infinity. 2-D networks are also formed in similar reactions with copper(II) nitrate or silver(I) nitrate to give [(Ph2C6H2(CO2)(CO2H))2Cu(py)2]infinity, [(Ph2C6H2(CO2)CO2H))2Cu(py)4.2H2O](infinity), and [(Ph2C6H2(CO2)2)Ag2]infinity, respectively. The hydrogen-bonded chains formed by the ligand alone and with 4,4'-dipyridyl are also described.     

钼铁硫原子簇化合物的合成与结构化学研究II: 以Fe(SR)6为桥的双类立方烷化合物的合成及(Et4N)4[Mo2Fe7S8(SC6H4CH3-m)12].2THF的晶体结构

在乙腈溶液中(Et4N)2[Fe4(SR)10]与(Et4N)2[MoS4]反应半小时生成对氧极为敏感的系列黑色晶状化合物(Et4N)4[Mo2Fe7S8(SR)12](R=C6H5,1;R=C6H4CH3-m, 2;R=C6H4CH3-o, 3;R=C6H4CH3-ρ,4). 2.2THF晶体的分子量为2982.8, 属单斜晶系;空间群为P21/n; a=18.022(2), b=18.375(2), c=22.254(3)A; β=71.04(1)°;V=6969(2)A^3;Dc=1.424g.cm^-^3;Z=2;F(000)=3108.晶体结构用直接法解出,修正至R=0.064. 2.2THF中Mo...Mo'距离为7.234A.