Growth Behavior and Kinetics of Self‐Assembled Silica–Carbonate Biomorphs

Upon slow crystallization from silica‐containing solutions or gels at elevated pH, alkaline‐earth carbonates spontaneously self‐assemble into remarkable nanocrystalline ultrastructures. These so‐called silica biomorphs exhibit curved morphologies beyond crystallographic symmetry and ordered textures reminiscent of the hierarchical design found in many biominerals. The formation of these fascinating materials is thought to be driven by a dynamic coupling of the components’ speciations in solution, which causes concerted autocatalytic mineralization of silica‐stabilized nanocrystals over hours. In the present work, we have studied the precipitation kinetics of this unique system by determining growth rates of individual aggregates using video microscopy, and correlated the results with time‐dependent data on the concentration of metal ions and pH acquired online during crystallization. In this manner, insight to the evolution of chemical conditions during growth was gained. It is shown that crystallization proceeds linearly with time and is essentially reaction controlled, which fits well in the proposed morphogenetic scenario, and thus, indirectly supports it. Measurements of the silica concentration in solution, combined with analyses of crystal aggregates isolated at distinct stages of morphogenesis, further demonstrate that the fraction of silica coprecipitated with carbonate during active growth is rather small. We discuss our findings with respect to the role of silica in the formation of biomorphs, and moreover, prove that the external silica skins that occasionally sheath the aggregates—previously supposed to be involved in the growth mechanism— originate from secondary precipitation after growth is already terminated.     

Sorption of divalent metal ions on CrPO4

The divalent metal ion sorption (Cu(2+), Cd(2+), Ni(2+), and Pb(2+)) on chromium phosphate (CrPO(4)) was studied as a function of pH, temperature, and concentration of metal ions. The sorption of metal ions is observed to increase with the increase in pH, temperature, and concentration of metal ions in solution. The mechanism of sorption is found to be the exchange of the hydrolyzed metal cations with the protons from solid at high temperature. The sorption at low temperature is found to be accompanied by the precipitation of the corresponding metal phosphates such as Pb(3)(PO(4))(2).     

Removal of Cu(II) from CuSO4 Aqueous Solution by Mg‐Al Hydrotalcite‐like Compounds

Hydrotalcite‐like compound (HTlc) with a Mg/Al molar ratio of 2:1 was synthesized by using a coprecipitation method and the sorption removal of Cu(II) by the Mg‐Al HTlc sample from CuSO₄ solution was investigated. It was found that the Mg‐Al HTlc showed a good sorption ability for Cu(II) from CuSO₄ solution, indicating that the use of hydrotalcite‐like compounds as promising inorganic sorbents for the removal of heavy metal ions from water is possible. The sorption kinetics and the sorption isotherm of Cu(II) on the HTlc obeyed the pseudo‐second order kinetic model and Langmuir equation, respectively. The percent removal of Cu(II) by the HTlc was strongly dependent on the initial pH of bulk solution. It increased sharply with the increase of initial pH value in the range of 5–7, and was relatively small in the initial pH range of 4–5, while it reached about 100% after initial pH was higher than 7. The presence of AlCl₃ might obviously lower the equilibrium sorption amount (q_e) of Cu(II) on the HTlc. However, the presences of NaCl and MgCl₂ might increase the q_e. The presences of ligands (citric acid and EDTA) in the studied concentration range might obviously decrease the q_e of Cu(II) on the HTlc. The removal mechanism of Cu(II) cations by HTlc in the presence of SO₄^2? anions may be attributed to the surface‐induced precipitation of Cu(II) hydroxides and the surface complex adsorption by the linking effect of SO₄^2? between the HTlc and Cu(II) cations, and the removal ability arising from the surface‐induced precipitation is much higher than that from the linking effect of SO₄^2?.     

电浮选方法在净化镍离子中的应用研究

采用电浮选方法,对水溶液中的Ni^2 的净化效果进行了研究。通过考察溶液的pH、离子强度、Ni^2 的初始浓度以及电极电流密度等因素,讨论了电浮选方法影响重金属Ni^2 净化的情况;并与传统的自然沉降法对照,认为电解过程所产生的微小气泡除参与浮选之外,还参与了金属胶体颗粒形成的絮凝过程,使电浮选工艺过程不仅能浮选不溶性胶体颗粒,而且还可以进一步去除溶液中可溶性重金属Ni^2 ,从而使净化效果更佳。实验结果也表明,电浮选对于净化处理含低浓度重金属Ni^2 溶液效果优于重量沉淀法。并对其它含重金属离子污水净化提供了参考。     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Novel Fe3O4/hydroxyapatite/β‐cyclodextrin nanocomposite adsorbent: Synthesis and application in heavy metal removal from aqueous solution

The increased global concern on environmental protection has made researchers focus their attention on new and more efficient methods of pollutant removal. In this research, novel nanocomposite adsorbents,i.e., magnetic hydroxyapatite (Fe₃O₄@HA) and magnetic hydroxyapatite β‐cyclodextrin (Fe₃O₄@HA‐CD) were synthesized and used for heavy metal removal. The adsorbents were characterized by FTIR, XRD, TGA, VSM, and SEM. In order to investigate the effect of β‐cyclodextrin (β‐CD) removal efficiency, adsorption results of nine metal ions were compared for both adsorbents. β‐CD showed the most increasing effect for Cd²⁺ and Cu²⁺ removal, so these two ions were selected for further studies. The effect of diverse parameters including pH, contact time, initial metal ion concentration and adsorbent dosage on the adsorption process was discussed. The optimum pH was 6 and adsorption equilibrium was achieved after 1 hr. Adsorption kinetic data were well fitted by pseudo‐second‐order model proposing that metal ions were adsorbed via chemical reaction. Adsorption isotherm was best described by the Langmuir model, and maximum adsorption capacity for Cd²⁺ and Cu²⁺ was 100.00 and 66.66 (mg/g), respectively. Desorption experiment was also done, and the most efficient eluent used for desorption of metal ions was EDTA (0.001 M) with 91% and 88% of Cd²⁺ and Cu²⁺ release, respectively. Recyclability studies also showed a 19% decrease in the adsorption capacity of the adsorbent after five cycles of regeneration. Therefore, the synthesized adsorbents were recognized as potential candidates for heavy metal adsorption applications.     

Preparation of poly(vinylalcohol)/poly(acrylamide‐co‐vinyl imidazole)/γ‐Fe2O3 semi‐IPN nanocomposite and their application for removal of heavy metal ions from water

A series of magnetic semi‐interpenetrating polymer network (semi‐IPN) hydrogels was prepared in one‐stage strategy composed of linear poly(vinyl alcohol) (PVA) chains and magnetic γ‐Fe₂O₃ nanoparticles entrapped within the cross‐linked poly(acrylamide‐co‐vinylimidazole) (poly(AAm‐co‐VI)) network. The influence of PVA, weight ratio of AAm:VI, γ‐Fe₂O₃, and MBA on the swelling properties of the obtained nanocomposite hydrogels was evaluated. The prepared magnetic semi‐IPN hydrogels were fully characterized and used as absorbent for removal of Pb(II) and Cd(II) from water. Factors that influence the metal ion adsorption such as solution pH, contact time, initial metal ion concentration, and temperature were studied in details. The experimental results were reliably described by Langmuir adsorption isotherms. The adsorption capacity of semi‐IPN nanocomposite for Pb(II) and Cd(II) were175.80 and 149.76 mg g^?1, respectively. The kinetic experimental data indicated that the chemical sorption is the rate‐determining step. According to thermodynamic studies, Pb(II) and Cd(II) adsorption on the hydrogels was endothermic and also chemical in nature. The prepared magnetic PVA/poly(AAm‐co‐VI) semi‐IPN hydrogels could be employed as efficient and low‐cost adsorbents of heavy metal ions from water. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrophobic Effects of o-Phenanthroline and 2,2′-Bipyridine on Adsorption of Metal(II) Ions onto Silica Gel Surface

The effects of o-phenanthroline and 2,2′-bipyridine on the adsorption of metal(II) (Fe, Co, Ni and Cu) ions onto silica gel surface have been studied. The adsorption is expressed in terms of the measured concentrations of both metal and ligand at equilibrium. Each adsorption of the four metal ions is increased with the presence of the ligands. In addition, adsorption increases slowly with pH at low pH values and then increases rapidly up to near the pK_a value of silica gel (≈6.5). The adsorption of each metal ion at low pH is increased with increased ligand concentration. However, at high pH the adsorptions of Fe(II) and Cu(II) are decreased with increased ligand concentration whereas the adsorptions of Co(II) and Ni(II) are always increased. At low pH values the ligand to metal ratio adsorbed on the silica gel surface is ca. 3:1 while at high pH values it is 1:1, 2:1, and 3:1, corresponding to the initial ligand to metal ion concentration ratio. The addition of ethanol to the phenanthroline-SiO₂ solution results in a decrease in the adsorption of phenanthroline. The effect of ethanol is also observed in the Fe(II)-phenanthroline-SiO₂ system. The behavior of the adsorption is interpreted qualitatively by hydrophobic expulsion, the formation of surface complexes, and electrostatic interaction. It is concluded that hydrophobic expulsion plays an important role in the adsorption of metal ions in the presence of hydrophobic ligands on silica gel surface.     

Highly efficient removal of toxic lead ions from aqueous solutions using a new magnetic metal‐organic framework nanocomposite

A magnetic metal‐organic framework (MOF) nanocomposite was successfully prepared by a new and green strategy through reasonable design. Magnetic MOF of Fe₃O₄‐NHSO₃H@HKUST‐1 nanocomposite use for removal of lead ions as an environmental pollutant. The experimental results indicated that the nano adsorbent of Fe₃O₄‐NHSO₃H@HKUST‐1 can removed lead ions under optimum operational conditions. The dosage of the nanocomposite, pH of the sample solution, and contact time were obtained to be 10 mg, 7.0, and 90 min, respectively, while the initial concentration of Pb(II) ions of 400 mg/L was used. A kinetic study indicated that a pseudo‐second‐order model agreed well with the experimental data. The isotherm experiments revealed that the Langmuir model attained better fits to the equilibrium data than the Freundlich model. The maximum adsorption capacity of the adsorbent for the removal of lead under the optimum operational conditions of pH 7.0 and temperature 25°C was found to be 384.6 mg/g. The thermodynamic parameters indicate that the adsorption of lead is spontaneous and endothermic. The magnetic MOF nanocomposite could be recovered easily and reused many times without significant loss of its nano‐adsorbent activity. The proposed method is simple, eco‐friendly, low cost, and efficient in the removal of lead ions from aqueous solutions.     

Simultaneous Determination of Tin,Nickel, Lead,Cadmium and Mercury in Tobacco and Tobacco Additives by Microwave Digestion and RP‐HPLC Followed by On‐Line Column Enrichment

A new method for the simultaneous determination of five heavy metal ions, tin, nickel, lead, cadmium and mercury ions as metal‐tetra‐(2‐aminophenyl)‐porphyrin (T₂APP) chelates was developed using reversed‐phase high performance liquid chromatography (RP‐HPLC) equipped with a photodiode array detector and combined with an on‐line enrichment technique. The tin, nickel, lead, cadmium and mercury ions were pre‐column derivatized with T₂APP to form color chelates. The Sn‐T₂APP, Ni‐T₂APP, Hg‐T₂APP, Cd‐T₂‐APP and Pb‐T₂APP chelates can be absorbed onto the front of the enrichment column when they are injected into the injector and sent to the enrichment column [Waters Xterra? RP₁₈(5μ, 3.9 × 20 mm)] with a buffer solution of 0.05 mol/L pyrrolidine‐acetic acid (pH = 10.0) as mobile phase. After the enrichment had finished, by switching the six‐port switching valves, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. These chelates separation on the analytical column [Waters Xterra? RP₁₈ (5μ, 3.9 × 150 mm)] was satisfactory by gradient elution with methanol (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) and acetone (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) as mobile phase. The linearity range is 0.01?120 μg/L for each metal ion. The detection limits (S/N = 3) of tin, nickel, lead, cadmium and mercury are 4.0 ng/L, 3.5 ng/L, 2.5 ng/L, 3.0 ng/L and 3.0 ng/L, respectively. This method was applied to the determination of tin, nickel, lead, cadmium and mercury ions in tobacco and tobacco additives with good results.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

Magnetic separation of heavy metal ions and evaluation based on surface‐enhanced Raman spectroscopy: Copper(II) ions as a case study

A new approach was developed for the magnetic separation of copper(II) ions with easy operation and high efficiency. p‐Mercaptobenzoic acid served as the modified tag of Fe₂O₃@Au nanoparticles both for the chelation ligand and Raman reporter. Through the chelation between the copper(II) ions and carboxyl groups on the gold shell, the Fe₂O₃@Au nanoparticles aggregated to form networks that were enriched and separated from the solution by a magnet. A significant decrease in the concentration of copper(II) ions in the supernatant solution was observed. An extremely sensitive method based on surface‐enhanced Raman spectroscopy was employed to detect free copper(II) ions that remained after the magnetic separation, and thus to evaluate the separation efficiency. The results indicated the intensities of the surface‐enhanced Raman spectroscopy bands from p‐mercaptobenzoic acid were dependent on the concentration of copper(II) ions, and the concentration was decreased by several orders of magnitude after the magnetic separation. The present protocol effectively decreased the total amount of heavy metal ions in the solution. This approach opens a potential application in the magnetic separation and highly sensitive detection of heavy metal ions.     

Synthesis and application of modified poly (styrene‐alt‐maleic anhydride) networks as a nano chelating resin for uptake of heavy metal ions

A chelating resin based on modified poly (styrene‐alt‐maleic anhydride) with 3‐aminobenzoic acid was synthesized. This modified resin was further reacted by 1,2‐diaminoethane or 1,3‐diaminopropane in the presence of ultrasonic irradiation to prepare tridimensional chelating resin for the removal of heavy metal ions from aqueous solutions. The adsorption behavior of Fe(II), Cu(II), Zn(II) and Pb(II) ions was investigated by synthesized chelating resins in various pH. Among the synthesized resins, CSMA‐AB1 and CSMA‐AB2 demonstrated a high affinity for the selected metal ions compared to SMA‐AB, and the order of removal percentage changes as follow: Fe(II) > Cu(II) > Zn(II) > Pb(II). The adsorption of all metal ions in acidic medium was moderate, and it was favored at the pH value of 6 and 7. Also, the prepared resins were examined for removal of metal ions from industrial wastewater and were shown to have a very efficient adsorption in the case of Cu(II), Fe(II) and Pb(II); however, the adsorption of Zn(II) was lower than others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis and thermogravimetric analysis/derivative thermogravimetry. Copyright © 2012 John Wiley & Sons, Ltd.     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Superhydrogels of Nanotubes Capable of Capturing Heavy‐Metal Ions

Self‐assembly regulated by hydrogen bonds was successfully achieved in the system of lithocholic acid (LCA) mixed with three organic amines, ethanolamine (EA), diethanolamine (DEA), and triethanolamine (TEA), in aqueous solutions. The mixtures of DEA/LCA exhibit supergelation capability and the hydrogels consist of plenty of network nanotubes with uniform diameters of about 60 nm determined by cryogenic TEM. Interestingly, the sample with the same concentration in a system of EA and LCA is a birefringent solution, in which spherical vesicles and can be transformed into nanotubes as the amount of LCA increases. The formation of hydrogels could be driven by the delicate balance of diverse noncovalent interactions, including electrostatic interactions, hydrophobic interactions, steric effects, van der Waals forces, and mainly hydrogen bonds. The mechanism of self‐assembly from spherical bilayer vesicles into nanotubes was proposed. The dried hydrogels with nanotubes were explored to exhibit the excellent capability for capturing heavy‐metal ions, for example, Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, and Hg²⁺. The superhydrogels of nanotubes from the self‐assembly of low‐molecular‐weight gelators mainly regulated by hydrogen bonds used for the removal of heavy‐metal ions is simple, green, and high efficiency, and provide a strategic approach to removing heavy‐metal ions from industrial sewage.     

Study of physical chemistry on biosorption of zinc by using Chlorella pyrenoidosa

Discharge of heavy metals from metal processing industries is known to have adverse effects on the environment. Biosorption of heavy metals by metabolically inactive biomass of microbial organisms is an innovative and alternative technology for removal of these pollutants from aqueous solution. Presence of heavy metals in the aquatic system is posing serious problems. Zinc has been used in many industries and removal of Zn ions from waste water is significant. Biosorption is one of the economic methods used for removal of heavy metals. In the present study, the biomass obtained from the dried Chlorella pyrenoidosa was used for evaluating the biosorption characteristics of Zn ions in aqueous solutions. Batch adsorption experiments were performed with this material and it was found that the amount of metal ions adsorbed increased with the increase in the initial metal ion concentration. In this study effect of agitation time, initial metal ion concentration, temperature, pH and biomass dosage were studied. Maximum metal uptake (q _max) observed at pH 5 was 101.11 mg/g. The biosorption followed both Langmuir and Freundlich isotherm model. The adsorption equilibrium was reached in about 1 h. The kinetic of biosorption followed the second-border rate. The biomass could be regenerated using 0.1 M HNO₃. A positive value of ΔH° indicated the endothermic nature of the process. A negative value of the free energy (ΔG°) indicated the spontaneous nature of the adsorption process. A positive value of ΔS° showed increased randomness at solid-liquid interface during the adsorption of heavy metals, it also suggests some structural changes in the adsorbate and the adsorbent. FTIR Spectrums of Chlorella pyrenoidosa revealed the presence of hydroxyl, amino, carboxylic and carbonyl groups. The scanning electron micrograph clearly revealed the surface texture and morphology of the biosorbent.     

Protein‐Assisted Synthesis of Double‐Shelled CaCO3 Microcapsules and Their Mineralization with Heavy Metal Ions

Calcium carbonate (CaCO₃) is one of the most abundant and important biominerals in nature. Due to its biocompatibility, biodegradability and nontoxicity, CaCO₃ has been investigated extensively in recent years for various fundamental properties and technological applications. Inspired by basic wall structures of cells, we report a protein‐assisted approach to synthesize CaCO₃ into a double‐shelled structural configuration. Due to varying reactivities of outer and inner shells, the CaCO₃ microcapsules exhibit different sorption capacities and various resultant structures toward different kinds of heavy metal ions, analogical to biologically controlled mineralization (BCM) processes. Surprisingly, three mineralization modes resembling those found in BCM were found with these bacterium‐like “CaCO₃ cells”. Our investigation of the cytotoxicity (MTT assay protocol) also indicates that the CaCO₃ microcapsules have almost no cytotoxicity against HepG2 cells, and they might be useful for future application of detoxifying heavy metal ions after further study.     

A Novel PVC‐Membrane‐Coated Graphite Sensor Based on an Anthraquinone Derivative Membrane for the Determination of Lead

A highly selective membrane electrode for the determination of ultratrace amounts of lead was prepared. The PVC membrane electrode based on 2‐(2‐ethanoloxymethyl)‐1‐hydroxy‐9,10‐anthraquinone (AQ), directly coated on graphite, exhibits a good Nernstian response for Pb(II) ions over a very wide concentration range (1.0×10^?7–1.0×10^?2 M) with a limit of detection of 8.0×10^?8 M. It has a fast response time of ca. 10 s and can be used over a period 2 months with good reproducibility (SD=±0.2 mV). The electrode revealed a very good selectivity respect to common alkali, alkaline earth, transition and heavy metal ions and could be used in the pH range of 3.5–6.8. It was used as an indicator electrode in potentiometric titration of lead ions with chromate and oxalate, and in indirect determination of lead in spring water samples.     

Copper and Nickel Removal from Aqueous Solutions Using New Chelating Poly[Acrylamide/N‐vinyl pyrrolidone/3‐(2‐hydroxyethyl carbamoyl)acrylic acid] Hydrogels

New poly[Acrylamide/N‐vinyl pyrrolidone/3‐(2‐hydroxyethyl carbamoyl)acrylic acid], poly [AAm/NVP/HECA], chelating hydrogels with different composition of HECA monomer have been prepared via free radical solution polymerization using N,N‐methylene bisacrylamide as a crosslinker. The hydrogels obtained were loaded with metal ions and characterized by FT‐IR spectroscopy, Scanning Electron Microscope (SEM) and Thermogravimatric analysis (TGA). The removal of Cu²⁺ and Ni²⁺ from aqueous solutions by the hydrogel was examined by a batch equilibrium method. The influence of treatment time, pH, initial concentration of the metal ions and HECA content in the feed compositions on the amount of adsorbed metal ions was studied. Swelling of the hydrogel was also carried out in distilled water and metal ion solutions. The removal of the metal ions followed the following order: Ni²⁺>Cu²⁺. The amount of metal ions removed increased with increasing HECA content in the feed composition, treatment time, pH of the medium and initial concentration of metal ions. The desorption of metal ions were carried out using 1 N HCl and 0.5 N H₂SO₄. The poly[AAm/NVP/HECA] hydrogels could be used many times without significantly decreasing their adsorption capacity.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.