Synthesis, Conformational Studies and Inclusion Properties of Tetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes

An attempted O-alkylation of the flexible macrocycle 1with 2-(chloromethyl)pyridine in the presence of Cs₂CO₃ under THF reflux afforded a mixture of twoconformers of tetra-O-alkylated product 4a in a ratio of 91:9 (cone-4a:1,2-alternate-4a)in 70% yield, while other possible isomers were not observed. In the case of Na₂CO₃, there was no reaction product,only the starting compound 1, whereasonly monoalkylated compound 3 was obtained when usingK₂CO₃ as the base. The distribution of cone conformer decreased in the case of O-alkylation of tetraol 1with 4-(chloromethyl)pyridine or benzyl bromide in the presence of Cs₂CO₃ in comparison with that ofO-alkylation with 2-(chloromethyl)pyridine, while the 1,2-alternate conformer increased in the same sequence. The larger Cs⁺might increase the contribution of the metal template effect, which can hold the 2-pyridylmethyl group(s) and theoxide group(s) on the same side of the tetrathiacalix[4]arene 1 through the cation-O^- and -N-interaction in the caseof O-alkylation of tetraol 1 with 2-(chloromethyl)pyridine.Only when the template metal can hold the 2-pyridyl group(s) andthe oxide group(s) on the same side of the tetrathiacalix[4]arene is the conformation immobilized to thecone. The template effect of the cesium cation plays an important role in this alkylation reaction. The structuralcharacterization of these products is also discussed.The two-phase solvent extraction data indicated thattetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes 4a show strong Ag⁺ affinity and a high Ag⁺ selectivity wasobserved for cone-4a. A good Job plot proves 1:1 coordination of cone-4a with Ag⁺ cation.¹H-NMR titration of cone-4a with AgSO₃CF₃ also clearly demonstrates that a 1:1complex is formed with retention of the original symmetry. In contrast, the 1,2-alternate-4a can form a 2:1 metal/thiacalix[4]arene complex and the two metal-binding sites display positive allostericity. The conformational changes ofpyridine moiety from the original outward orientation of the ring nitrogen to the inside orientation toward thethiacalixarene cavity were observed in the processof Ag⁺ complexation.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

Unexplored metallic cation effect in the acidity constants of p-t-butylthiacalix[4]arene,p-t-butylcalix[4]arene and p-t-butylcalix[6]arene in aqueous-organic media

The influence of the metallic cation of the base (Li⁺, Na⁺ or K⁺) was determined on the acid–base constants of p-t-butylthiacalix[4]arene (TC4), p-t-butylcalix[4]arene (CA4) and p-t-butylcalix[6]arene (CA6) in ethanol/water in an large interval of pH values by potentiometry and spectrophotometry. The pK_a values determined by both methods correlate very well and these are characteristic for each macrocycle with influence of the cation of the base without a straight evidence of an effect by the size of the metallic cation. In the case of TC4, pK_a1 and pK_a2 were lower to Li⁺ and Na⁺ than with K⁺. For CA4, an effect of K⁺ on the pK_a2 with respect to Li⁺ was observed. A very different behaviour was observed for CA6 with Li⁺ and K⁺ showing a lower pK_a2 and a higher pK_a3 than with Na⁺. These effects were interpreted on the basis of the interaction/complexation of each cation with each macrocycle.     

Experimental and computational studies of the binding properties of lower rim tetra- and di-substituted calix[4]arene amide derivatives with metal ions

Abstract

Experimental and theoretical binding studies of representative alkali, alkaline earth, transition, heavy metal and lanthanide cations by tetra- and di-substituted calix[4]arene amide derivatives (diethyl amide 1a–c and morpholide amide 2a–c) in the cone conformation were carried out. Binding was assessed by extraction experiments of the metal picrates from water to dichloromethane and proton NMR titrations. Density functional theory calculations were also performed to determine the binding energy of the complexes formed and to analyse the host–guest interaction modes. In the cases of ligands 1b and 2c with Na⁺ and Ag⁺ picrates, the extraction energy was also determined using the polarisable continuum model. The results are discussed in terms of the nature of the amide residue and the substitution pattern (1,3 vs. 1,2). Both tetra-amide derivatives are good extractants, showing preference for Na⁺, Ca²⁺, Ag⁺ and Pb²⁺ cations, mainly di-ethylamide 1a. Concerning di-amide derivatives, the relative position of the substituents seems to be more important than the nature of the amide group in the extraction process. Proton NMR studies indicate the formation of 1:1 complexes between the amides and the cations studied, and DFT data show that all ligands form the most stable complexes with La³⁺.     

Hard–Soft Receptors, Tetrakis[(N,N-diethylaminocarbonyl)methoxy] thiacalix[4]arene Derivatives with cone and 1,3-alternate Conformation

Direct O-alkylation of p-tert-butyltetrathiacalix[4]arene with N,N-diethylchloroacetamide afforded two conformational isomers (1,3-alternate and cone) of tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene and 1,3-disubstituted bis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene, depending on the base used. The complaxation behaviors of the tetrakis isomers were assessed by ¹H NMR titration experiments. Evidence of 1:2 (homo- and hetero-dinuclear) complexes formation of 1,3-alternate-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene with alkali (K⁺ and Na⁺) or transition (Ag⁺) metal ions was obtained. Interestingly, it was found that the cone-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene required a prior Ag⁺ complexation to form 1:2 heterodinuclear complex. Received in final form: 26 January 2005     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

Ionselective electrodes based on adamantylthiacalix[4]arenes for alkali cations determination

The possibility of using three derivatives of p-R-thiacalix[4]arene: tetraethyl ester of p-(1-adamantyl)thiacalix[4]arene acid (I) and asymmetric p-tert-buthylcalix[4]-p-R-thiacalix[4]arene “molecular tubes” [R = tert-Bu(II), 1-adamantyl(III)] as ionophores in PVC-membrane ISEs for the determination of Na⁺, K⁺ and Rb⁺ ions was studied. It was found that an electrode based on thiacalix[4]arene (I) exhibited high selectivity toward Na⁺ ions, and electrodes with (II) and (III) demonstrated a good potentiometric response of the Rb⁺ ion; Rb⁺ can be determined in the presence of excess amounts Na⁺ and K⁺.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.     

Complexation of fluoride anion and its ion pairs with alkali metal cations by tetra-substituted lower rim calix[4]arene tryptophan derivative

Abstract

Selective binding of fluoride anion and its alkali metal cation ion pairs by a fluorescent calix[4]arene (L) derivative bearing tryptophan moieties was studied in acetonitrile at 25 °C. It was found that LF^? and LF₂^2? complexes were formed and their stability constants were determined by means of UV and ¹H NMR titrations. Both amide and indole NH groups were involved in the stabilisation of the fluoride complexes, i.e. L afforded two anion-binding sites. ¹H NMR titrations provided evidence of simultaneous complexation of both Na⁺ cation and fluoride anion resulting in the formation of a ternary NaLF complex. In this ion pair complex, the Na⁺ cation was most probably bound primarily by the calixarene ether and amide oxygen atoms, whereas the indole NH groups interacted with the fluoride ion. A highly favourable ion pairing between Na⁺ and F^– in acetonitrile was studied using potentiometric measurements. The results pointed out the importance of fluoride pairing with alkali metal cations in aprotic organic solvents and the necessity of taking these reactions into account in the course of speciation studies of such solutions.     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.     

不同碱处理制备多级孔HZSM-5催化剂及噻吩烷基化性能研究

用Na₂CO₃、TPAOH和TPA⁺/CO₃^2-混合碱分别处理HZSM-5分子筛,采用FT-IR、XRD、XRF、N₂吸附脱附、SEM、NH₃-TPD及Py-FTIR表征手段对各类碱处理前后的HZSM-5分子筛进行表征。结果表明,3种类型的碱处理HZSM-5分子筛后,均能形成微孔-介孔多级孔道的HZSM-5(A)催化剂,并能调变催化剂的酸性,其中,TPA⁺/CO₃^2-混合碱处理得到的HZSM-5(TPA⁺/CO₃^2-)催化剂,比表面积最大,介孔数量最多。在小型固定床反应器上,考察了HZSM-5和HZSM-5(A)催化剂的噻吩烷基化性能,结果表明,HZSM-5(TPA⁺/CO₃^2-)催化剂因为具有适当的多级孔孔道和较多的B酸中心而表现出较高的噻吩转化率和1-己烯对噻吩的选择性。     

Synthesis and complexing property of four-bridged crownopaddlanes

A new series of crown compounds crownopaddlanes 3a-c bearing three cyclobutane rings were prepared by means of intramolecular [2+2] photocycloaddition of styrene derivatives. The yield of crownopaddlane 3b possessing five ethereal oxygen atoms was remarkably high 52% with the addition of sodium borofluoride in the photoreaction system. As this template effect suggests, 3b showed extraordinarily high Na⁺-selectivity with high efficiency on the liquid-liquid extraction of alkali metal picrates, though 3a having four ethereal oxygen atoms did not extracted any cations in this system. The high Na⁺-selectivity of 3b was further clarified by the equilibrium stability constants (log K_a) for Na⁺ (5.85) and K⁺ (2.91) in acetonitrile solution. The complexation of 3b to Na⁺ cation was also examined by X-ray crystallography. Crownopaddlane 3c bearing six ethereal oxygen atoms also efficiently and selectively extracted alkali metal cations, compared with conventional 18-crown-6 derivatives.     

Synthesis and cation binding properties of fluorescent calix[4]arene derivatives bearing tryptophan units at the lower rim

The fluorescent peptidocalixarenes, 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-di(O-methyl)-26,28-bis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (2), were prepared by introducing tryptophan subunits at a lower calixarene rim. Coordination abilities of 1 and 2 towards Eu(III) and alkali metal cations were studied by spectrophotometric, spectrofluorimetric, conductometric and potentiometric titrations in acetonitrile at 25°C. Rather strong complexation was observed for smaller alkali metal cations Li⁺ and Na⁺ (log K _Li1 >6, log K _Li2 >6, log K _Na1  = 8.25, log K _Na2  = 6.94), and moderate for K⁺ (log K _K1  = 5.09, log K _K2  = 4.09). Larger Rb⁺ and Cs⁺ cations did not fit in the ion binding site of 1 so no complexation was detected, whereas the more flexible ligand 2 accommodated Rb⁺ cation (log K _Rb2  = 3.44). The fluorescence of 1 (λ_ex = 280 nm, λ_em = 340 nm) was remarkably quenched by Eu(III). Stability constant of 1:1 (Eu³⁺:1) complex determined spectrofluorimetrically amounted to log K _Eu1  = 6.16.     

Cation Binding Properties by Ligands Deriving from p-tert-butylcalix[4]arene O-substituted by Diethyl Malonate Functions

The complexing properties of four dimalonate and one diester calix[4]arene derivatives toward alkali and alkaline earth cations have been investigated in acetonitrile by means of UV spectrophotometry. Mononuclear complexes have been detected for all the complexesexcept in the case of ligands 4 and 5 with Na⁺ and Ca²⁺ where a biligand species (ML₂) is present. This later stoichiometry was also confirmed by ¹H-NMR and FAB⁺ MS methods. In the case of ligand 3 and Sr²⁺we observed the formation of both mono and binuclear species (ML, M²L). Particular selectivities have to be noted from the unique complexation of Na⁺ and Ba²⁺ byligand 2 and Rb⁺ by ligand 3 toward the two series of cations. The complexation is predominantly dependent on the bulkiness of the cavity and the cation size.     

Synthesis and physiochemical studies on binuclear Cu(II) complexes derived from 2,6-[(N-phenylpiperazin-1-yl)methyl]-4-substituted phenols

Preparation of the ligands HL¹ = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-ethylphenol; HL² = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-methoxyphenol and HL³ = 2,6-[(N-phenylpiperazin-1-yl)methyl]-p-nitrophenol are described together with their Cu(II) complexes with different bridging units. The exogenous bridges incorporated into the complexes are: hydroxo [Cu₂L(OH)(H₂O)₂](ClO₄)₂.H₂O (L¹=1a, L² =1b, L³ =1c), acetato [Cu₂L(OAc)₂]ClO₄.H₂O (L¹ =2a, L² =2b, L³ =2c) and nitrito [Cu₂L¹(NO₂)₂(H₂O)₂]ClO₄.H₂O (L¹=3a, L² =3b, L³ =3c). Complexes1a,1b,1c and2a,2b,2c contain bridging exogenous groups, while3a,3b,3c possess only open μ-phenolate structures. Both the ligands and complexes were characterized by spectral studies. Cyclic voltammetric investigation of these complexes revealed that the reaction process involves two successive quasireversible one-electron steps at different potentials. The first reduction potential is sensitive to electronic effects of the substituents at the aromatic ring of the ligand system, shifting to positive potentials when the substituents are replaced by more electrophilic groups. EPR studies indicate very weak interaction between the two copper atoms. Various covalency parameters have been calculated.     

Regioselective intramolecular bridging of p-tert-butylcalix[10]arene

The synthesis and characterization of a series of regioselective intramolecular bridging of calix[10]arene are described for the first time. Reacting p-tert-butylcalix[10]arene with tri-ethylene glycol ditosylate using K₂CO₃ as a base in toluene, 1,2-calix[10]crown-4 2a, 1,4-calix[10]crown-4 2b and 1,6-calix[10]crown-4 2c were obtained in yields of 9%, 14% and 7%, respectively. While using Cs₂CO₃/acetone instead of K₂CO₃/toluene, the 1,4-calix[10]crown-4 2b was obtained selectively in good yield up to 50%.     

Synthesis, binding properties and theoretical studies of p-tert-butylhexahomotrioxacalix[3]arene tri(adamantyl)ketone with alkali, alkaline earth, transition, heavy metal and lanthanide cations

p-tert-Butylhexahomotrioxacalix[3]arene tri(adamantyl)ketone (1b) was synthesized for the first time. Compound 1b was obtained in a cone conformation in solution at room temperature, as established by NMR spectroscopy (¹H and ¹³C). The binding properties of ligand 1b for alkali, alkaline earth, transition, heavy metal and lanthanide cations have been assessed by phase transfer and proton NMR titration experiments. Molecular mechanics and ab initio techniques were also employed to complement the NMR data. The results are compared to those obtained with other closely related homooxacalixarene derivatives. Although triketone 1b is a weak extractant, it shows a strong peak selectivity for Na⁺ and also some preference for Ag⁺. Proton NMR titrations indicate the formation of 1:1 complexes between 1b and the cations studied, and also that they should be located inside the cavity defined by the phenoxy and carbonyl oxygen atoms. Although the molecular mechanics results show little correlation with the NMR data, a good agreement was obtained with the ab initio models.     

含卤素端基的单取代对-叔丁基杯[6]芳烃的合成与表征

用THF作为反应溶剂, K₂CO₃作碱, 对-叔丁基杯[6]芳烃与二溴丁烷、二溴己烷和1,4-二氯丁炔-2反应以中等产率选择性地合成了含有卤素端基的单取代对-叔丁基杯[6]芳烃2a～2c. 2a和2b可与对甲苯磺酸甲酯(MeOTs)反应高产率地得到全甲基化产物3a和3b. 通过核磁共振谱(¹H NMR)和质谱(FAB-MS)表征, 发现所有化合物都具有预期结构, 2a～2c和3b在室温下是锥式构象, 而3a没有固定构象.