A terminal and four-coordinate titanium alkylidene prepared by oxidatively induced alpha-hydrogen abstraction

One-electron oxidation of the beta-diketiminate titanium(III) bis-neopentyl complex (Nacnac)Ti(CH2tBu)2 (Nacnac = [Ar]NC(Me)CHC(Me)N[Ar], Ar = 2,6-(CHMe2)2C6H3) promotes alpha-abstraction to afford the rare and terminal four-coordinate neopentylidene (Nacnac)Ti=CHtBu(OTf), which was structurally characterized. Alkylidene (Nacnac)Ti=CHtBu(OTf) reacts cleanly with benzophenone and the imine functionality of the Nacnac ligand to afford the corresponding Wittig-type products.     

Reactivity at the beta-diketiminate ligand Nacnac- on titanium(IV) (Nacnac- = [Ar]NC(CH3)CHC(CH3)N[Ar], Ar = 2,6-[CH(CH3)2]2C6H3). Diimine-alkoxo and bis-anilido ligands stemming from the Nacnac- skeleton

The reaction of ketene OCCPh(2) with the four-coordinate titanium(IV) imide (L(1))Ti[double bond]NAr(OTf) (L(1)(-) = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-[CH(CH(3))(2)](2)C(6)H(3)) affords the tripodal dimine-alkoxo complex (L(2))Ti[double bond]NAr(OTf) (L(2)(-) = [Ar]NC(CH(3))CHC(O)[double bond]CPh(2)C(CH(3))N[Ar]). Complex (L(2))Ti[double bond]NAr(OTf) forms from electrophilic attack of the beta-carbon of the ketene on the gamma-carbon of the Nacnac(-) NCC(gamma)CN ring. On the contrary, nucleophiles such as LiR (R(-) = Me, CH(2)(t)Bu, and CH(2)SiMe(3)) deprotonate cleanly in OEt(2) the methyl group of the beta-carbon on the former Nacnac(-) backbone to yield the etherate complex (L(3))Ti[double bond]NAr(OEt(2)), a complex that is now supported by a chelate bis-anilido ligand (L(3)(2)(-) = [Ar]NC(CH(3))CHC(CH(2))N[Ar]). In the absence of electrophiles or nucleophiles, the robust (L(1))Ti[double bond]NAr(OTf) template was found to form simple adducts with Lewis bases such as CN(t)Bu or NCCH(2)(2,4,6-Me(3)C(6)H(2)). Complexes (L(2))Ti[double bond]NAr(OTf), (L(3))Ti[double bond]NAr(OEt(2)), and the adducts (L(1))Ti[double bond]NAr(OTf)(XY) [XY = CN(t)Bu and NCCH(2)(2,4,6-Me(3)C(6)H(2))] were structurally characterized by single-crystal X-ray diffraction studies.     

Terminal and four-coordinate vanadium(IV) phosphinidene complexes. A pseudo Jahn-Teller effect of second order stabilizing the V-P multiple bond

Treatment of the four-coordinate vanadium neopentylidene (Nacnac)V=CHtBu(I) (Nacnac- = [Ar]NC(Me)CHC(Me)N[Ar], Ar = 2,6-iPr2C6H3) with a bulky primary lithium phosphide LiPHR (R = 2,4,6-iPr3C6H2, 2,4,6-tBu3C6H2) leads to alpha-hydrogen migration concomitant with the formation of a four-coordinate vanadium complex containing a terminal phosphinidene functionality (Nacnac)V=PR(CH2tBu). The crystal structures for the vanadium phosphinidene complexes prepared herein were determined by single-crystal X-ray diffraction methods. Solution EPR and magnetic measurements of the vanadium phosphinidenes are also in accordance with such systems containing a V(IV) metal center, and DFT calculations indicate the V=P bond to be stabilized through a pseudo Jahn-Teller effect of second order.     

Latent low-coordinate titanium imides supported by a sterically encumbering beta-diketiminate ligand

Addition of an equal molar quantity of R- (R = Me, SiMe3) to complex (Nacnac)Ti=NAr(OTf) (Nacnac- =[ArNC(tBu)]2CH, Ar = 2,6-iPr2C6H3) forms the imido alkyl (Nacnac)Ti=NAr(R), which can be readily protonated to afford [(Nacnac)Ti=NAr(L)]+ (L = THF, Et2O, eta1-C6H5NMe2), or treated with B(C6F5)3 to afford the zwitterion (Nacnac)Ti=NAr(micro-CH3)B(C6F5)3.     

Four-coordinate phosphinidene complexes of titanium prepared by alpha-H-migration: phospha-Staudinger and phosphaalkene-insertion reactions

alpha-Hydrogen migration in the phosphide (Nacnac)Ti=CHtBu(PHR) (Nacnac- = [Ar]NC(Me)CHC(Me)N[Ar], Ar = 2,6-iPr2C6H3, R = C6H11, 2,4,6-iPr3C6H2, 2,4,6-tBuC6H2), prepared from salt metathesis of (Nacnac)Ti=CHtBu(PHR) with LiPHR, generates terminal and four-coordinate phosphinidene complexes (Nacnac)Ti=PR(CH2tBu), one of which was structurally characterized (R = 2,4,6-tBu3C6H2). Phosphinidene intermediate (Nacnac)Ti=PR(CH2tBu) (R = C6H11, 2,4,6-iPr3C6H2) transform to ([Ar]NC(Me)CHC(Me)P[R][CH2tBu])Ti=NAr(OEt2) through "phospha-Staudinger" and subsequent phosphaalkene-insertion reactions.     

Introduction of Constrained Cyclic Skeleton into β-Enaminoketonato Vanadium Complexes: A Strategy for Stabilization of Active Centre of Vanadium Catalyst for Ethylene Polymerization

Several novel mono( ?-enaminoketonato) vanadium complexes bearing constrained cyclic skeleton, including[(C6H5)C6H3C(O) = C(CH2)nCH = N ― Ar]VCl2(THF)2(V3a: n = 1, Ar = C6H5; V4a: n = 2, Ar = C6H5; V4b: n = 2, Ar =C6F5; V4c: n = 2, Ar =(C3H7)2C6H3; V5a: n = 3, Ar = C6H5), were synthesized and their structure and properties were characterized. The structures of V4 c and V5 a in solid-state were further confirmed by X-ray crystallographic analysis.Density functional theory(DFT) results indicated that these complexes showed enhanced steric hindrance around the metal center as compared with the acyclic analogues. Upon activation with Et2 Al Cl and in the presence of ethyl trichloroacetate as a reactivator, all of the complexes exhibited high catalytic activities(107 g PE/(mol V·h)) toward ethylene polymerization, and the obtained polymers exhibited unimodal distributions(Mw/Mn = 2.0-2.3) even produced at elevated temperatures(70-100 °C) and prolonged reaction time. When MAO was employed as a cocatalyst, they only showed moderate catalytic activities(105 g PE/(mol V·h)), but the resulting polymers had higher molecular weights(168-241 kg/mol). These vanadium complexes with cyclic skeleton also showed high catalytic activities toward ethylene/norbornene copolymerization. The produced copolymers displayed approximate alternating structure at high in-feed concentration of norbornene. The catalytic capabilities of these complexes could be tuned conveniently by varying ligand structure. Furthermore, the cyclic voltammetry results also proved that these complexes exhibited better redox stabilities than the complexes bearing linear skeleton.     

Synthesis and reactivity of the imido analogues of the uranyl ion

Addition of 1.5 equiv of I2 to a THF solution of UI3(THF)4, containing either 6 equiv of tBuNH2 or 2 equiv of RNH2 (R = Ph, 3,5-(CF3)2C6H3, 2,6-(iPr)2C6H3) and 4 equiv of NEt3, generates orange solutions containing U(NtBu)2I2(THF)2 (1) or U(NAr)2I2(THF)3 (Ar = Ph, 2; 3,5-(CF3)2C6H3, 3; 2,6-(iPr)2C6H3, 4), respectively, all of which can be isolated in good yields. Alternatively, 1 can be prepared by reaction of uranium metal with 3 equiv of I2 and 6 equiv of tBuNH2, also in good yield. Complexes 1-4 have been characterized by X-ray crystallography, and each of these complexes exhibits linear N-U-N linkages and short U-N bonds. Using density functional theory simulations of complexes 1 and 2, two triple bonds between the metal center and the nitrogen ligands were identified. Complexes 1 and 2 readily react with neutral Lewis bases such as pyridine or Ph3PO to form U(NR)2I2(L)2 (R = tBu, L = py, 5; Ph3PO, 7; R = Ph, L = py, 6; Ph3PO, 8), and with PMe3 to form U(NR)2I2(THF)(PMe3)2 (R = tBu, 9; Ph, 10). The solid-state molecular structures of 5, 7, and 9 have been determined by X-ray crystallography, and these complexes, like their parent compounds, exhibit linear N-U-N angles and short U-N bonds. Complexes 1 and 2 also react with AgOTf in CH2Cl2, forming U(NR)2(OTf)2(THF)3 (R = tBu, 11; Ph, 12) after recrystallization from THF. Crystals of 12 grown from CH2Cl2 were found to contain a dimer, [U(NPh)2(OTf)2(THF)2]2, a complex possessing bridging triflate groups.     

Intermolecular C-H bond activation reactions promoted by transient titanium alkylidynes. Synthesis, reactivity, kinetic, and theoretical studies of the Ti[triple bond]C linkage

The neopentylidene-neopentyl complex (PNP)Ti=CH(t)Bu(CH2(t)Bu) (2; PNP(-) = N[2-P(CHMe2)(2-)4-methylphenyl]2), prepared from the precursor (PNP)Ti[triple bond]CH(t)Bu(OTf) (1) and LiCH2(t)Bu, extrudes neopentane in neat benzene under mild conditions (25 degrees C) to generate the transient titanium alkylidyne, (PNP)Ti[triple bond]C(t)Bu (A), which subsequently undergoes 1,2-CH bond addition of benzene across the Ti[triple bond]C linkage to generate (PNP)Ti=CH(t)Bu(C6H5) (3). Kinetic, mechanistic, and theoretical studies suggest the C-H activation process to obey pseudo-first-order in titanium, the alpha-hydrogen abstraction to be the rate-determining step (KIE for 2/2-d(3) conversion to 3/3-d(3) = 3.9(5) at 40 degrees C) with activation parameters DeltaH = 24(7) kcal/mol and DeltaS = -2(3) cal/mol.K, and the post-rate-determining step to be C-H bond activation of benzene (primary KIE = 1.03(7) at 25 degrees C for the intermolecular C-H activation reaction in C6H6 vs C6D6). A KIE of 1.33(3) at 25 degrees C arose when the intramolecular C-H activation reaction was monitored with 1,3,5-C6H3D3. For the activation of aromatic C-H bonds, however, the formation of the sigma-complex becomes rate-determining via a hypothetical intermediate (PNP)Ti[triple bond]C(t)Bu(C6H5), and C-H bond rupture is promoted in a heterolytic fashion by applying standard Lewis acid/base chemistry. Thermolysis of 3 in C6D6 at 95 degrees C over 48 h generates 3-d(6), thereby implying that 3 can slowly equilibrate with A under elevated temperatures with k = 1.2(2) x 10-5 s(-1), and with activation parameters DeltaH = 31(16) kcal/mol and DeltaS = 3(9) cal/mol x K. At 95 degrees C for one week, the EIE for the 2 --> 3 reaction in 1,3,5-C6H3D3 was found to be 1.36(7). When 1 is alkylated with LiCH2SiMe3 and KCH2Ph, the complexes (PNP)Ti=CHtBu(CH2SiMe3) (4) and (PNP)Ti=CHtBu(CH2Ph) (6) are formed, respectively, along with their corresponding tautomers (PNP)Ti=CHSiMe3(CH2tBu) (5) and (PNP)Ti=CHPh(CH2tBu) (7). By means of similar alkylations of (PNP)Ti=CHSiMe3(OTf) (8), the degenerate complex (PNP)Ti=CHSiMe3(CH2SiMe3) (9) or the non-degenerate alkylidene-alkyl complex (PNP)Ti=CHPh(CH2SiMe3) (11) can also be obtained, the latter of which results from a tautomerization process. Compounds 4/5 and 9, or 6/7 and 11, also activate benzene to afford (PNP)Ti=CHR(C6H5) (R = SiMe3 (10), Ph (12)). Substrates such as FC6H5, 1,2-F2C6H4, and 1,4-F2C6H4 react at the aryl C-H bond with intermediate A, in some cases regioselectively, to form the neopentylidene-aryl derivatives (PNP)Ti=CHtBu(aryl). Intermediate A can also perform stepwise alkylidene-alkyl metatheses with 1,3,5-Me3C6H3, SiMe4, 1,2-bis(trimethylsilyl)alkyne, and bis(trimethylsilyl)ether to afford the titanium alkylidene-alkyls (PNP)Ti=CHR(R') (R = 3,5-Me2C6H2, R' = CH2-3,5-Me2C6H2; R = SiMe3, R' = CH2SiMe3; R = SiMe2CCSiMe3, R' = CH2SiMe2CCSiMe3; R = SiMe2OSiMe3, R' = CH2SiMe2OSiMe3).     

Synthesis, structure, and reactivity of O-donor Ir(III) complexes: C-H activation studies with benzene

Various new thermally air- and water-stable alkyl and aryl analogues of (acac-O,O)2Ir(R)(L), R-Ir-L (acac-O,O = kappa2-O,O-acetylacetonate, -Ir- is the trans-(acac-O,O)2Ir(III) motif, R = CH3, C2H5, Ph, PhCH2CH2, L = Py) have been synthesized using the dinuclear complex [Ir(mu-acac-O,O,C3)-(acac-O,O)(acac-C3)]2, [acac-C-Ir]2, or acac-C-Ir-H2O. The dinuclear Ir (III) complexes, [Ir(mu-acac-O,O,C3)-(acac-O,O)(R)]2 (R = alkyl), show fluxional behavior with a five-coordinate, 16 electron complex by a dissociative pathway. The pyridine adducts, R-Ir-Py, undergo degenerate Py exchange via a dissociative mechanism with activation parameters for Ph-Ir-Py (deltaH++ = 22.8 +/- 0.5 kcal/mol; deltaS++ = 8.4 +/- 1.6 eu; deltaG++298 K) = 20.3 +/- 1.0 kcal/mol) and CH3-Ir-Py (deltaH++ = 19.9 +/- 1.4 kcal/mol; deltaS++ = 4.4 +/- 5.5 eu; deltaG++298 K) = 18.6 +/- 0.5 kcal/mol). The trans complex, Ph-Ir-Py, undergoes quantitatively trans-cis isomerization to generate cis-Ph-Ir-Py on heating. All the R-Ir-Py complexes undergo quantitative, intermolecular CH activation reactions with benzene to generate Ph-Ir-Py and RH. The activation parameters (deltaS++ =11.5 +/- 3.0 eu; deltaH++ = 41.1 +/- 1.1 kcal/mol; deltaG++298 K = 37.7 +/- 1.0 kcal/mol) for CH activation were obtained using CH3-Ir-Py as starting material at a constant ratio of [Py]/[C6D6] = 0.045. Overall the CH activation reaction with R-Ir-Py has been shown to proceed via four key steps: (A) pre-equilibrium loss of pyridine that generates a trans-five-coordinate, square pyramidal intermediate; (B) unimolecular, isomerization of the trans-five-coordinate to generate a cis-five-coordinate intermediate, cis-R-Ir- square; (C) rate-determining coordination of this species to benzene to generate a discrete benzene complex, cis-R-Ir-PhH; and (D) rapid C-H cleavage. Kinetic isotope effects on the CH activation with mixtures of C6H6/C6D6 (KIE = 1) and with 1,3,5-C6H3D3 (KIE approximately 3.2 at 110 degrees C) are consistent with this reaction mechanism.     

Synthesis and solid-state structures of pyrazolylmethane complexes of the rare earths

In this paper, we report the first examples of trispyrazolylmethane complexes of rare earths. Reaction of LnCl3 with Tpm* (tris(3,5-dimethylpyrazolyl)methane) in THF or acetonitrile gives good yields of the [Ln(Tpm*)Cl3] (Ln = Y, Ce, Nd, Sm, Gd, Yb). Tpm* adducts of the lanthanide triflates [Ln(Tpm*)(OTf)3(THF)] (Ln = Y, Ho, Dy) may also be prepared. The X-ray crystal structures of [Y(Tpm*)Cl3], [Sm(Tpm*)Cl3(THF)], and [Ln(Tpm*)(OTf)3(THF)] (Ln = Y, Ho) are reported. The halide/triflate complexes may be used to prepare the aryloxide complexes [Ln(Tpm*)(OArMe2)3] (Ln = Y, Nd, Sm, Yb; ArMe2 = C6H3-2,6-(CH3)2), which are fluxional in solution as a result of interactions between the Tpm* and the aryloxide groups. The structures of the Nd and Sm complexes have been determined. Finally, the reaction of [Nd(BH4)3(THF)3] with Tpm* in THF results in the displacement of two THF molecules to give [Nd(Tpm*)(BH4)3(THF)]. Infrared spectra are consistent with tridentate borohydride coordination. The X-ray structures of these compounds indicate that the Tpm* ligand is less strongly bound than its anionic trispyrazolylborate analogues.     

Synthesis of vanadium(III) complexes bearing iminopyrrolyl ligands and their role as thermal robust ethylene (co)polymerization catalysts

Bis(imino)pyrrolyl vanadium(III) complexes 2a-e [2,5-C(4)H(2)N(CH=NR)(2)]VCl(2)(THF)(2) [R = C(6)H(5) (2a), 2,6-Me(2)C(6)H(3) (2b), 2,6-(i)Pr(2)C(6)H(3) (2c), 2,4,6-Me(3)C(6)H(2) (2d), C(6)F(5) (2e)] and bis(iminopyrrolyl) vanadium(III) complex 4f [C(4)H(3)N(CH=N-2,6-(i)PrC(6)H(3))](2)VCl(THF) have been prepared in good yields from VCl(3)(THF)(3) by treating with 1.0 and 2.0 equivalent deprotonated ligands in tetrahydrofuran (THF), respectively. These complexes were characterized by FTIR and mass spectra as well as elemental analysis. Structures of 2c and 4f were further confirmed by X-ray crystallographic analysis. DFT calculations indicated the configurations of 2a-e with two nitrogen atoms of the chelating ligand coordinating with vanadium metal centre were more stable in energy. These complexes were employed as catalysts for ethylene polymerization at various reaction conditions. On activation with Et(2)AlCl, these complexes exhibited high catalytic activities (up to 22.2 kg mmol(-1)(V) h(-1) bar(-1)) even at high temperature, suggesting these catalysts possessed remarkable thermal stability. Moreover, high molecular weight polymer with unimodal molecular weight distributions can be obtained, indicating the polymerization took place in a single-site nature. The copolymerizations of ethylene and 1-hexene with precatalysts 2a-e and 4f were also explored in the presence of Et(2)AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.     

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.     

A nitridoniobium(V) reagent that effects acid chloride to organic nitrile conversion: synthesis via heterodinuclear (Nb/Mo) dinitrogen cleavage, mechanistic insights, and recycling

The transformation of acid chlorides (RC(O)Cl) to organic nitriles (RC[triple bond]N) by the terminal niobium nitride anion [N[triple bond]Nb(N[Np]Ar)3]- ([1a-N]-, where Np = neopentyl and Ar = 3,5-Me2C6H3) via isovalent N for O(Cl) metathetical exchange is presented. Nitrido anion [1a-N]- is obtained in a heterodinuclear N2 scission reaction employing the molybdenum trisamide system, Mo(N[R]Ar)3 (R = t-Bu, 2a; R = Np, 2b), as a reaction partner. Reductive scission of the heterodinuclear bridging N2 complexes, (Ar[R]N)3Mo-(mu-N2)Nb(N[Np]Ar)3 (R = t-Bu, 3b; R = Np, 3c) with sodium amalgam provides 1 equiv each of the salt Na[1a-N] and neutral N[triple bond]Mo(N[R]Ar)3 (R = t-Bu, 2a-N; R = Np, 2b-N). Separation of 2-N from Na[1a-N] is readily achieved. Treatment of salt Na[1a-N] with acid chloride substrates in tetrahydrofuran (THF) furnishes the corresponding organic nitriles concomitant with the formation of NaCl and the oxo niobium complex O[triple bond]Nb(N[Np]Ar)3 (1a-O). Utilization of 15N-labeled 15N2 gas in this chemistry affords a series of 15N-labeled organic nitriles establishing the utility of anion [1a-N]- as a reagent for the 15N-labeling of organic molecules. Synthetic and computational studies on model niobium systems provide evidence for the intermediacy of both a linear acylimido and niobacyclobutene species along the pathway to organic nitrile formation. High-yield recycling of oxo 1a-O to a niobium triflate complex appropriate for heterodinuclear N2 scission has been developed. Specifically, addition of triflic anhydride (Tf2O, where Tf = SO2CF3) to an Et2O solution of 1a-O provides the bistriflate complex, Nb(OTf)2(N[Np]Ar)3 (1a-(OTf)2), in near quantitative yield. One-electron reduction of 1a-(OTf)2 with either cobaltocene (Cp2Co) or Mg(THF)3(anthracene) provided the monotriflato complex, Nb(OTf)(N[Np]Ar)3 (1a-(OTf)), which efficiently regenerates complexes 3b and 3c when treated with the molybdenum dinitrogen anions [N2Mo(N[t-Bu]Ar)3]- ([2a-N2]-) or [N2Mo(N[Np]Ar)3]- ([2b-N2]-), respectively.     

Neutral and zwitterionic low-coordinate titanium complexes bearing the terminal phosphinidene functionality. Structural, spectroscopic, theoretical, and catalytic studies addressing the Ti-P multiple bond

Alpha-hydrogen abstraction and alpha-hydrogen migration reactions yield novel titanium(IV) complexes bearing terminal phosphinidene ligands. Via an alpha-H migration reaction, the phosphinidene ((tBu)nacnac)Ti=P[Trip](CH(2)(tBu) ((tBu)nacnac(-) = [Ar]NC((t)Bu)CHC((t)Bu)N[Ar], Ar = 2,6-(CHMe2)(2C6H3, Trip = 2,4,6-(i)Pr3C6H2) was prepared by the addition of the primary phosphide LiPH[Trip] to the nucleophilic alkylidene triflato complex ((tBu)nacnac)Ti=CH(t)Bu(OTf), while alpha-H abstraction was promoted by the addition of LiPH[Trip] to the dimethyl triflato precursor ((tBu)nacnac)Ti(CH)(2)(OTf) to afford ((tBu)nacnac)Ti=P[Trip](CH3). Treatment of ((tBu)nacnac)Ti=P[Trip](CH3) with B(C6F5)(3) induces methide abstraction concurrent with formation of the first titanium(IV) phosphinidene zwitterion complex ((tBu)nacnac)Ti=P[Trip]{CH3B(C6F5)(3)}. Complex ((tBu)nacnac)Ti=P[Trip]{CH3B(C6F5)(3)} [2 + 2] cycloadds readily PhCCPh to afford the phosphametallacyclobutene [((tBu)nacnac)Ti(P[Trip]PhCCPh)][CH3B(C6F5)(3)]. These titanium(IV) phosphinidene complexes possess the shortest Ti=P bonds reported, have linear phosphinidene groups, and reveal significantly upfielded solution 31P NMR spectroscopic resonances for the phosphinidene phosphorus. Solid state 31P NMR spectroscopic data also corroborate with all three complexes possessing considerably shielded chemical shifts for the linear and terminal phosphinidene functionality. In addition, high-level DFT studies on the phosphinidenes suggest the terminal phosphinidene linkage to be stabilized via a pseudo Ti[triple bond]P bond. Linearity about the Ti-P-C(ipso) linkage is highly dependent on the sterically encumbering substituents protecting the phosphinidene. Complex ((tBu)nacnac)Ti=P[Trip]{CH3B(C6F5))(3)} can catalyze the hydrophosphination of PhCCPh with H(2)PPh to produce the secondary vinylphosphine HP[Ph]PhC=CHPh. In addition, we demonstrate that this zwitterion is a powerful phospha-Staudinger reagent and can therefore act as a carboamination precatalyst of diphenylacetylene with aldimines.     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.     

Assembly of triangular trimetallic complexes by triamidophosphine ligands: spin-frustrated Mn2+ plaquettes and diamagnetic Mg2+ analogues with a combined through-space, through-bond pathway for 31P-31P spin-spin coupling

The reactions of 2 equiv of the ligand precursor P(CH2NHPh)3 or P[CH2NH-3,5-(CF3)2C6H3]3 with 3 equiv of Mn[N(SiMe3)2]2 provide high-yielding routes to the triangular trinuclear Mn(II) complexes [P(CH2NPh)3]2Mn3(THF)3.1.5THF and [P(CH2N-3,5-(CF3)2C6H3)3]2Mn3(THF)3. The solid-state structures of these paramagnetic complexes have approximate C3 symmetry. The magnetic moments from 300 to 1.8 K could be fit as a magnetic Jahn-Teller distorted isosceles triangle. These complexes exhibit spin frustration and possess an S = 1/2 ground state, as revealed by a plot of magnetization versus field at 1.8 K; at fields above 3.8 T, the occupation of an excited state with S = 3/2 becomes significant. The diamagnetic magnesium analogues were prepared by the reaction of the ligand precursor P(CH2NHPh)3, P[CH2NH-3,5-(CF3)2C6H3]3, or P(CH2NH-3,5-Me2C6H3)3 with nBu2Mg. The solid-state structures of [P(CH2NPh)3]2Mg3(THF)3.1.5THF and [P(CH2N-3,5-(CF3)2C6H3)3]2Mg3(THF)3 were determined. Solution 1H NMR spectroscopy was used to demonstrate that the solid-state structures are maintained in solution. The aryl group of the terminal amido donor exhibits slow rotation on the NMR time scale, and this was found to be an electronic effect. Solution 31P{1H} NMR spectroscopy revealed an unexpected 15 Hz coupling between phosphorus nuclei in these complexes. Calculations on a model complex using density functional theory demonstrates that this coupling occurs via a combined through-space, through-bond pathway.     

Chromium complexes supported by phenanthrene-imine derivative ligands: synthesis, characterization and catalysis on isoprene cis-1,4 polymerization

Reactions of CrCl(2)(THF)(2) with N-aryl-9,10-iminophenanthraquinone in CH(2)Cl(2) give the monoimine chromium complexes (Ar)IPQCrCl(2)(THF)(2) (1, Ar = 2,6-Me(2)C(6)H(3); 2, Ar = 2,6-Et(2)C(6)H(3); 3, Ar = 2,6-(i)Pr(2)C(6)H(3)). Molecular structures of 1 and 3 were revealed to be monomeric with the chromium atoms in distorted octahedral geometries. Similar reactions of CrCl(2)(THF)(2) with N,N-bis(arylimino)phenanthrene ligands afford the diimine complexes (Ar1,Ar2)BIPCrCl(μ-Cl)(3)Cr(THF)(Ar1,Ar2)BIP (4, Ar(1) = Ar(2) = 2,6-Me(2)C(6)H(3); 5, Ar(1) = Ar(2) = 2,6-Et(2)C(6)H(3); 6, Ar(1) = Ar(2) = 2,6-(i)Pr(2)C(6)H(3); 7, Ar(1) = 2,6-Me(2)C(6)H(3), Ar(2) = 2,6-(i)Pr(2)C(6)H(3)). The X-ray diffraction analysis shows that 4, 5, and 7 are chlorine-bridged dimers with each chromium atom in a distorted octahedral geometry. Upon activation with MAO, all these complexes exhibit good catalytic activities for isoprene polymerization affording polyisoprene with predominantly a cis-1,4 unit.     

Group 5 imido complexes derived from diamido-pyridine ligands

Reaction of the vanadium(V) imide [V(NAr)Cl(3)(THF)] (Ar = 2,6-C(6)H(3)(i)()Pr(2)) with the diamino-pyridine derivative MeC(2-C(5)H(4)N)(CH(2)NHSiMe(2)(t)()Bu)(2) (abbreviated as H(2)N'(2)N(py)) gave modest yields of the vanadium(IV) species [V(NAr)(H(3)N'N' 'N(py))Cl(2)] (1 where H(3)N'N' 'N(py) = MeC(2- C(5)H(4)N)(CH(2)NH(2))(CH(2)NHSiMe(2)(t)()Bu) in which the original H(2)N'(2)N(py) has effectively lost SiMe(2)(t)()Bu (as ClSiMe(2)(t)()Bu) and gained an H atom. Better behaved reactions were found between the heavier Group 5 metal complexes [M(NR)Cl(3)(py)(2)] (M = Nb or Ta, R = (t)()Bu or Ar) and the dilithium salt Li(2)[N(2)N(py)] (where H(2)N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NHSiMe(3))(2)), and these yielded the six-coordinate M(V) complexes [M(NR)Cl(N(2)N(py))(py)] (M = Nb, R = (t)()Bu 2; M = Ta, R = (t)()Bu 3 or Ar 4). The compounds 2-4 are fluxional in solution and undergo dynamic exchange processes via the corresponding five-coordinate homologues [M(NR)Cl(N(2)N(py))]. Activation parameters are reported for the complexes 2 and 3. In the case of 2, high vacuum tube sublimation afforded modest quantities of [Nb(N(t)()Bu)Cl(N(2)N(py))] (5). The X-ray crystal structures of the four compounds 1, 2, 3, and 4 are reported.     

Synthesis of triamidoamine ligands of the type (ArylNHCH(2)CH(2))(3)N and molybdenum and tungsten complexes that contain an [ArylNCH(2)CH(2))(3)N]3- ligand

Aryl bromides react with (H(2)NCH(2)CH(2))(3)N in a reaction catalyzed by Pd(2)(dba)(3) in the presence of BINAP and NaO-t-Bu to give the arylated derivatives (ArylNHCH(2)CH(2))(3)N [Aryl = C(6)H(5) (1a), 4-FC(6)H(4) (1b), 4-t-BuC(6)H(4) (1c), 3,5-Me(2)C(6)H(3) (1d), 3,5-Ph(2)C(6)H(3) (1e), 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3) (1f), 2-MeC(6)H(4) (1g), 2,4,6-Me(3)C(6)H(2) (1h)]. Reactions between (ArNHCH(2)CH(2))(3)N (Ar = C(6)H(5), 4-FC(6)H(4), 3,5-Me(2)C(6)H(3), and 3,5-Ph(2)C(6)H(3)) and Mo(NMe(2))(4) in toluene at 70 degrees C lead to [(ArNHCH(2)CH(2))(3)N]Mo(NMe(2)) complexes in yields ranging from 64 to 96%. Dimethylamido species (Ar = 4-FC(6)H(4), 3,5-Me(2)C(6)H(3)) could be converted into paramagnetic [(ArNHCH(2)CH(2))(3)N]MoCl species by treating them with 2,6-lutidinium chloride in tetrahydrofuran (THF). The "direct reaction" between 1a-f and MoCl(4)(THF)(2) in THF followed by 3 equiv of MeMgCl yielded [(ArNHCH(2)CH(2))(3)N]MoCl species (3a-f) in high yield. If 4 equiv of LiMe instead of MeMgCl are employed in the direct reaction, then [(ArNHCH(2)CH(2))(3)N]MoMe species are formed. Tungsten species, [(ArNHCH(2)CH(2))(3)N]WCl, could be prepared by analogous "direct" methods. Cyclic voltammetric studies reveal that MoCl complexes become more difficult to reduce as the electron donating ability of the [ArylNCH(2)CH(2))(3)N]3- ligand increases, and the reductions become less reversible, consistent with ready loss of chloride from ([(ArNHCH(2)CH(2))(3)N]MoCl)(-). Tungsten complexes are more difficult to reduce, and reductions are irreversible on the CV time scale.     

Temperature-dependent coordination of phosphine to five-coordinate alkenylruthenium complexes

The red, five-coordinate complexes Ru(CO)Cl(PPh(3))2(CH=CHPh) and [Ru(CO)Cl(PPh(3))2]2(mu-CH=CHC(6)H(4)CH=CH) undergo reversible coordination of PPh(3) at low temperature to produce the pale yellow, six-coordinate complexes Ru(CO)Cl(PPh(3))3(CH=CHPh) and [Ru(CO)Cl(PPh(3))3]2(mu-CH=CHC(6)H(4)CH=CH). X-ray crystal structures of the latter complex and of the hydride complex RuH(CO)Cl(PPh(3))3 were obtained. 1H and 31P NMR spectra between 20 and -70 degrees C exhibit large changes in both equilibrium constants and dynamic effects. Thermodynamic parameters, DeltaH = -17.5 +/- 2.0 kcal/mol and DeltaS = -57.5 +/- 7.6 eu, were obtained for PPh(3) coordination to the monoruthenium complex, and activation parameters, DeltaH = 20.6 +/- 0.7 kcal/mol and DeltaS = 41.6 +/- 2.0 eu, were obtained for the reverse decoordination. Coordination of PPh(3) was not observed upon cooling of the shorter bridged complex, [Ru(CO)Cl(PPh(3))2]2(mu-CH=CHCH=CH).