Synthesis and photoluminescence of iridium complexes with benzothiazol-2-yl carbazole derivative ligand

Two new iridium(III) complexes containing benzothiazol-2-yl carbazole derivative as a cyclometalated ligand (L) and picolinate (pic) or acetylacetonate (acac) as the ancillary ligand, Ir(III) bis(3-(benzothiazol-2-yl)-9-butyl-carbazole)(picolinate) [Ir(L)₂(pic)] and Ir(III) bis(3-(benzothiazol-2-yl)-9-butyl-carbazole)(acetylacetonate) [Ir(L)₂(acac)], were synthesized and characterized by elemental analysis, ¹H NMR, FT-IR, and UV–Vis absorption spectra. Both the iridium(III) complexes emit intense green–yellow emissions, indicating that they are useful for the fabrication of organic light-emitting diodes.     

New Quinoxaline-Containing Monomers for Narrow-Bandgap Polymers

Two new fused quinoxaline-containing monomers—2,3-bis(9-(2-decyltetradecyl)-9H-carbazol-3-yl)dithieno[3,2-f:2'3'-h]quinoxaline (М1) and 2,5-di(nonadecan-3-yl)bis[1,3]thiazolo[4,5-a:5',4'-c]bisthieno[3,2-h:2',3'-j]phenazine (М2)—have been synthesized in high yields of 88 and 83% as promising building blocks of D-A polymers for photovoltaic applications. The optical bandgaps, found from the absorption edge, are 2.79 and 2.88 eV, respectively. The HOMO/LUMO energies of М1 and М2 are–5.83/–2.96 and–5.83/–2.98 eV, respectively. Both monomers have low-lying HOMO levels, which is favorable for a high open-circuit voltage and a high stability in air in the development of PSCs. The E _g ^ec values of monomers М1 and М2 are 2.87 and 2.85 eV and are consistent well with the optical bandgap (2.79 and 2.88 eV, respectively).     

Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

以苯基吡唑为主配体的Ir配合物电子结构和光谱性质的密度泛函理论研究

用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)的B3LYP方法对以苯基吡唑ppz为主配体的4种Ir配合物Ir(ppz)₃, Ir(ppz)₂(acac), Ir(ppz)₂(pic)和Ir(ppz)₂(dbm)的电子结构和光谱性质进行了理论研究. 计算结果表明, 辅助配体的改变对Ir配合物的最高占据轨道(HOMO)的影响不大, 但会显著的降低分子最低空轨道(LUMO)的能级, 从而调节Ir配合物的HOMO和LUMO间的能隙. 4种配合物对应的发射跃迁分别为Ir(ppz)₃:d(Ir)+π(ppz)→π*(ppz); Ir(ppz)₂(pic):d(Ir)+(ppz)→π*(pic); Ir(ppz)₂(acac), Ir(ppz)₂(dbm):d(Ir)+π(acacdbm)→π*(acacdbm). 金属配合物的发光颜色可以通过选择合适的辅助配体调节.     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

Rylene diimide and dithienocyanovinylene copolymers for polymer solar cells

Two polymers containing(E)-2,3-bis(thiophen-2-yl)acrylonitrile(CNTVT) as a donor unit, perylene diimide(PDI) or naphthalene diimide(NDI) as an acceptor unit, are synthesized by the Stille coupling copolymerization, and used as the electron acceptors in the solution-processed organic solar cells(OSCs). Both polymers exhibit broad absorption in the region of 300–850 nm. The LUMO energy levels of the resulted polymers are ca. –3.93 eV and the HOMO energy levels are –5.97 and –5.83 eV. In the binary blend OSCs with PTB7-Th as a donor, PDI polymer yields the power conversion efficiency(PCE) of up to 1.74%, while NDI polymer yields PCE of up to 3.80%.     

Probing the Effects of the Number and Positions of −OCH3 and −CN Substituents on Color Tuning of Ir(III) Complex Derivatives through a Joint Computational and Experimental Study

We performed a joint theoretical and experimental study on sixteen Ir(III) complexes bearing a similar molecular platform of bis(2-phenylbenzothiozolato-N,C^2’) iridium(III) (acetylacetonate) by grafting −OCH₃ group and/or −CN group on different positions of the C-related arene moiety of the ligand (C-ring). Our results reveal that the introduction of −CN renders an overall drop in the FMO energy levels while a reverse increase is observed for −OCH₃. The ortho- and para-sites of the C-ring are more effective substitution positions to modulate the HOMO energy level due to the fact that the electronic density of HOMO mainly locates at them while the meta-site would induce a stronger impact on LUMO since the electronic density of LUMO mainly distributes over the position. Utilizing the synergistic effects of the substituents and the substituted positions, a wide color-tuning range from 479 nm to 637 nm was achieved, which covers nearly the whole window of visible spectrum. In particular, the tri-substituted Ir35mo4cn complex (λ_{em max}=637 nm) may be a potential candidate for high efficiency red OLEDs materials due to its greatly enhanced absorption processes, relatively higher ³MLCT (%), lower ΔE_S1–T1, enlarged separation between ³MLCT/π–π* and ³MC d–d states, and good hole and particle-transporting performances. Finally, six representative complexes were synthesized and their spectra were determined, which confirm the reliability of our computational strategy.     

以喹啉衍生物和乙酰丙酮为配体的Ir配合物的结构和光谱性质的理论研究

用密度泛函理论(DFT)B3LYP方法对以喹啉衍生物(C∧N)及乙酰丙酮(acac)为配体的金属Ir(Ⅲ)的三个配合物的电子结构和光谱性质进行了理论研究. 计算结果表明, 当喹啉上的取代基(sub)由苯变为联苯或萘时, 电离能变小, 电子亲和势变大, 尤其是分子3, 可预测其能作为电子传输材料和空穴传输材料. 同时, HOMO和 LUMO之间的能隙变窄, 导致光谱红移. T1态主要为HOMO→LUMO 的跃迁. T1→S0 的磷光发射过程为MLCT和LLCT的混合.     

Highly efficient phosphorescent iridium (III) diazine complexes for OLEDs: Different photophysical property between iridium (III) pyrazine complex and iridium (III) pyrimidine complex

The synthesis and luminescence of four new iridium (III) diazine complexes (1-4) were investigated. HOMO and LUMO energy levels of the complexes were estimated according to the electrochemical performance and the UV-Vis absorption spectra, showing the pyrimidine complexes have a larger increase for the LUMO than the HOMO orbital in comparison with the pyrazine complexes. Several high-efficiency yellow and green OLEDs based on phosphorescent iridium (III) diazine complexes were obtained. The devices emitting yellow light based on 1 with turn-on voltage of 4.1 V exhibited an external quantum efficiency of 13.2% (power efficiency 20.3 lm/W), a maximum current efficiency of 37.3 cd/A. The electroluminescent performance for the green iridium pyrimidine complex of 3 is comparable to that of the iridium pyridine complex (PPY)₂Ir(acac) (PPY = 2-phenylpyridine), which is among the best reported.     

Enhanced open-circuit voltage in methoxyl substituted benzodithiophene-based polymer solar cells

The open-circuit voltage (V _oc) is one of the important parameters that influence the power conversion efficiency (PCE) of polymer solar cells. Its value is mainly determined by the energy level offset between the highest occupied molecular orbital (HOMO) of the donor and the lowest unoccupied molecular orbital (LUMO) of the acceptor. Therefore, decreasing the HOMO value of the polymer could lead to a high V _oc and thus increasing the cell efficiency. Here we report a facile way to lower the polymer HOMO energy level by using methoxyl substituted-benzodithiophene (BDT) unit. The polymer with the methoxyl functionl group (POBDT(S)-T1) exhibited a HOMO value of–5.65 eV, which is deeper than that (–5.52 eV) of polymer without methoxyl unit (PBDT(S)-T1). As a result, POBDT(S)-T1-based solar cells show a high V _oc of 0.98 V and PCE of 9.2%. In contrast, PBDT(S)-T1-based devices show a relatively lower V _oc of 0.89 V and a moderate PCE of 7.4%. The results suggest that the involvement of methoxyl group into conjugated copolymers can efficiencly lower their HOMO energy levels.     

Density functional theory insight into Eu(III) and Am(III) complexes with two 2,6-dicarboxypyridine diamide-type ligands

Extraction complexes of Eu(III) and Am(III) with two 2,6-dicarboxypyridine diamide-type ligands L–A and L–B (Fig. 1) are studied by density functional theory (DFT). At both B3LYP/6-31G(d)/RECP and MP2/6-31G(d)/RECP levels of theory, the geometrical optimizations of the structures of the complexes can achieve the same accuracy and obtain the same geometrical configuration. At the B3LYP/6-311G(d,p)/RECP level of theory Eu³⁺ and Am³⁺ prefer to form [ML]³⁺ complexes under the solvation conditions, and the Am(III) complexes with L–A are more stable than the corresponding Eu(III) complexes. In the system with the ligand L–B, both [ML]³⁺ and [ML(NO₃)₃] species are very unstable.     

Synthesis and electrochromic properties of polyimides with pendent benzimidazole and triphenylamine units

Five novel near-infrared electrochromic aromatic polyimides(PIs) with pendent benzimidazole group were synthesized from 4,4'-diamino-4'-(1-benzylbenzimidazol-2-yl)triphenylamine(named as DBBT) with five different dianhydrides via two-step polymerization process, respectively. The maximum UV-Vis absorption bands of these PIs locate at about 335 nm for solid films due to the π-π* transitions. A reversible pair of distinct redox peaks, that were associated with a noticeable color change from original yellow to blue, was observed in the cyclic voltammetry(CV) test. A new absorption peak emerged at 847 nm in near-infrared(NIR) region with increasing voltage in UV-Vis-NIR spectrum, which indicates that PI can be used as NIR electrochromic material. These novel PIs have good electrochemical stability, appropriate energy levels for the highest occupied molecular orbital(HOMO) and the lowest unoccupied molecular orbital(LUMO), in the range of-5.17 e V to-5.20 e V and-2.14 e V to-2.26 e V(versus the vacuum level) determined by cyclic voltammetry method. These values basically consisted with the results of quantum chemical calculation. These polyimides can be used as novel electrochromic and hole transportation materials.     

New monomer based on thienopyrazine with fluorocarbazole substituents as a promising building block for organic electronics

A new monomer, 2,3-bis[6-fluoro-9-(2-octyldodecyl)-9H-carbazol-3-yl]-3,3'-[5,7-di(5-bromothienyl-2)thieno[3,4-b]pyrazine, M1, based on thienopyrazine containing fluorocarbazole substituents in the pyrazine ring has been synthesized. The structure of the compound has been proved by ¹H and ¹³C NMR and elemental analysis. The HOMO and LUMO energies for monomer M1 and its precursor 3 determined by the electrochemical method are–5.03 and–3.31 eV, as well as–5.28 and–3.36 eV, respectively. Band gap widths E _g ^ec are 1.72 and 1.92 eV for compounds M1 and 3, respectively. The new structural fragment has rather deep energy levels of frontier molecular orbitals and a small band gap width; therefore, it is a promising building block for the synthesis of polymers for organic electronics.     

Triplet level-dependent photoluminescence and photoconduction properties of π-conjugated polymer thin films doped by iridium complexes

Triplet energy level-dependent decay pathways of excitons populated on iridium (Ir) complexes within π-conjugated polymeric matrices were studied by means of photoluminescence (PL) and photoconduction action spectroscopy. We chose a set of matrices, poly(9-vinylcarbazole) (PVK), poly[9,9-bis(2-ethylhexyl)fluorene-2,7-diyl] (PF2/6), poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene] (CNPPP), and poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene-co-pridine] (CNPPP-py10 and CNPPP-Py20), having triplet energy levels ranging from 2.2 up to 3.0 eV. As Ir-complex dopants, we selected three phosphorescent emitters, iridium(III)bis(2-(2′-benzothienyl) pyridinato-N-acetylacetonate) (Ir(btp)₂acac), iridium(III)fac-tris(2-phenylpyridine) (Ir(ppy)₃), and iridium(III)bis[(4,6-fluorophenyl)-pyridinato-N,C^2′]picolinate (FIrpic), having triplet energy levels of 2.1, 2.5, and 2.7 eV, respectively. It was found that the triplet emission from the dopants, being populated via energy transfer from the matrices, was strongly dependent on the matching of triplet energy levels between matrix polymers and Ir-complexes. Photocurrent action spectra confirm effective exciton confinement at the dopants sites in the case of PVK matrix systems.     

Synthesis and heterocyclization of 2-{[2-(4-bromophenyl)-2-oxoethyl]sulfanyl}pyrimidin-4(3<Emphasis Type="Italic">h</Emphasis>)-ones

Alkylation of sodium 4(5)-alkyl-6-oxo-1,6-dihydropyrimidine-2-thiolates with 2-bromo-1-(4-bromophenyl)ethan-1-one afforded 2-{[2-(4-bromophenyl)-2-oxoethyl]sulfanyl}pyrimidin-4(3H)-ones. Analogous reaction with sodium 4-trifluoromethyl-6-oxo-1,6-dihydropyrimidine-2-thiolate gave a mixture of 2-{[2-(4-bromophenyl)-2-oxoethyl]sulfanyl}-4-(trifluoromethyl)pyrimidin-4(3H)-one and its intramolecular cyclization product, 3-(4-bromophenyl)-3-hydroxy-7-trifluoromethyl-2,3-dihydro[1,3]thiazolo[3,2-a]-pyrimidin-5-one.     

以2-(2-吡啶基)苯并噻吩为主配体的两种蓝紫光二价铂配合物的合成与性质

以2-(2-吡啶基)苯并噻吩(2-(2-pyridyl)benzothiophene,btp)作为主配体,分别以邻二氮菲[1,10]并咪唑联苯酚(2-(1H-imidazo[4,5-f][1,10]phenanthrolin-2-yl)phenol,ipap)和3-甲基-6-苯基咪唑[2,1-6]噻唑(3-Methyl...     

Acceptor-donor-acceptor conjugated oligomers based on diketopyrrolopyrrole and thienoacenes with four,five and six rings for organic thin-film transistors

Three acceptor-donor-acceptor(A-D-A) conjugated oligomers, i.e., O1, O2 and O3, have been synthesized using diketopyrrolopyrrole(DPP) as an electron-acceptor unit, and naphtho[1,2-b:5,6-b']dithiophene(NDT), anthra[1,2-b:5,6-b']dithiophene(ADT) or dithieno[3,2-b:3',2'-b']naphtho[1,2-b:5,6-b']dithiophene(DTNDT) as electron-donor unit. These oligomers exhibit identical highest occupied molecular orbital(HOMO) and lowest unoccupied molecular orbital(LUMO) energy levels, which were ca.-5.1 and-3.3 eV, respectively. Upon thermal annealing, all three oligomers formed thin films with ordered microstructures, and their organic thin film transistors(OTFTs) exhibited p-type transport behavior. The mobility was increased with an extension of the size of D-units. O3 showed the best OTFT performance with the mobility of up to 0.20 cm~2·V~(-1)·s~(-1). The film quality of O3 was improved by adding 1 wt% poly(methylmethacrylate)(PMMA). In consequence, the mobility of the O3-based devices was further enhanced to 0.30 cm~2·V~(-1)·s~(-1).     

Bis[1,3]thiazolo[4,5-<Emphasis Type="Italic">f</Emphasis>:5',4'-<Emphasis Type="Italic">h</Emphasis>]thieno[3,4-<Emphasis Type="Italic">b</Emphasis>]quinoxaline Derivatives as New Building Blocks of Polymers for Organic Electronics

New derivatives of bis[1,3]thiazolo[4,5-f:5',4'-h]thieno[3,4-b]quinoxaline containing the fused thiadiazoloquinoxaline moiety have been prepared. Monomer M1 shows strong light absorption within 600–800 nm due to intramolecular charge transfer. The optical bandgap E _g ^opt determined from the absorption edge in a film is 1.44 eV. The HOMO and LUMO levels are–5.44 and–3.12 eV, respectively. The new structural fragment has a rather low frontier molecular orbital energies and a small bandgap; therefore, it is a promising building block for the synthesis of polymers for organic electronics.     

Diastereoselective 1,3-Dipolar Cycloaddition of Nitrones to 1<Emphasis Type="Italic">H</Emphasis>-Pyrrole-2,3-diones. Synthesis of pyrrolo[3,2-<Emphasis Type="Italic">d</Emphasis>]isoxazoles

1H-pyrrol-2,3-diones react with nitrones affording substituted pyrrolо[3,2-d]isoxazoles. The structures of ethyl (3R*,3aR*,6aR*)-6-benzyl-3-(4-bromophenyl)-4,5-dioxo-2,6a-diphenylhexahydro-3aHpyrrolo[ 3,2-d]isoxazole-3a-carboxylate and dimethyl (3R*,3aR*,6aS*)-3-(4-bromophenyl)-4,5-dioxo-2,6-diphenyltetrahydro-3aH-pyrrolo[3,2-d]isoxazole-3a,6a(4H)-dicarboxylate were proved by single-crystal X-ray analysis.     

室温磷光材料二(2-苯基吡啶)(2-(2-吡啶)苯并咪唑)合铱(III)的合成及光电特性

以2-苯基吡啶(ppy)为主配体, 2-(2-吡啶)苯并咪唑(pybiH)为辅助配体合成了一种室温蓝绿色磷光发射材料二(2-苯基吡啶)( 2-(2-吡啶)苯并咪唑)合铱(III) ((ppy)₂Ir(pybi)), 通过傅里叶变换红外(FTIR)光谱、核磁共振氢谱(1H NMR)、质谱(MS)、元素分析对其结构进行了表征. 利用紫外-可见吸收光谱、荧光激发和发射光谱、循环伏安曲线, 结合含时密度泛函理论(TD-DFT)模拟计算研究了(ppy)₂Ir(pybi)的光物理特性及能级结构, 并研究了其电致发光性能. (ppy)₂Ir(pybi)的紫外吸收峰分别位于250, 295, 346和442 nm, 与理论模拟计算吻合得很好;(ppy)₂Ir(pybi)为蓝绿光发射, 发光峰分别位于495 和518 nm; (ppy)₂Ir(pybi) 的最高占据轨道(HOMO)和最低空轨道(LUMO)能级分别为-6.11和-3.43 eV, 光学带隙为2.68 eV; 以(ppy)₂Ir(pybi)为掺杂剂, 4,4'-N,N'-二咔唑基联苯(CBP)为主体材料, 制备电致磷光器件, 电致发射峰位于508 nm, 最大亮度为8451 cd·m^-2, 最大电流效率为17.6 cd·A^-1. 这些研究为(ppy)₂Ir(pybi)在有机电致发光领域的应用提供实验依据.