表面接枝含氟苯乙烯共聚物的聚酯薄膜制备与表征

利用表面引发原子转移自由基聚合(SI-ATRP)在聚对苯二甲酸乙二醇酯(PET)薄膜表面接枝苯乙烯和4-氟苯乙烯的共聚物.研究不同反应时间和不同配比下接枝共聚物对聚酯薄膜表面组成、结构和性能的影响.通过傅利叶变换红外光谱仪(ATR/FTIR),X-射线光电子能谱仪(XPS),凝胶渗透色谱(GPC)和扫描电子显微镜(SEM)对接枝改性前后PET薄膜的表面组成,结构和形貌进行分析;利用接触角测试和表面能计算对比研究接枝改性前后PET薄膜的表面性能.结果表明反应时间和单体百分含量对接枝百分率及接触角有一定的影响,随着反应时间的增长,聚酯薄膜表面接枝百分率增大,接触角增加,表面自由能下降.     

Immobilization of Bovine Serum Albumin on Poly(ether ether ketone)for Surface Biocompatibility Improvement

UV-induced graft polymerization of acrylic acid(AA)on poly(ether ether ketone)(PEEK)films was carried out to introduce-COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introd...     

Novel strategy in enhancing stability and corrosion resistance for hydrophobic functional films on copper surfaces

A rod-like 1-dodecanethiol film assisted with the preferential adhesion of polydopamine was prepared on the non-etching copper surfaces by a simple dip-coating method. The formation and surface structure of the film were characterized by water contact angle measurement, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Once the 1-dodecanethiol film formed on the polydopamine-coated copper surface, the hydrophilic surface changed to hydrophobic. The corrosion behavior of the functional films was evaluated by the electrochemical impedance spectroscopy (EIS). The excellent corrosion resistance property could be ascribed to the compact film structure and good seawater stability for modified copper surface, especially in limiting the infiltration of Cl⁻.     

Surface Heparinization of Poly(ether ether ketone)

Photo-grafting of hydrophilic monomer and space arms was used to enhance the hydrophilicity of poly(ether ether ketone)(PEEK) with the aim of extending its application to biological fields. PEEK films were surface modified by UV grafting of acrylic acid(AA) to introduce ―COOH on PEEK surface. Adipic amine was used as a space arm to introduce heparin on PEEK surface based on the condensation reaction between ―NH₂ and ―COOH. The modified PEEK(PEEK-COOH, PEEK-NH₂ and PEEK-Hep) was characterized by energy-disperse spectroscopy (EDS), X-ray photoelectron spectroscopy(XPS) and water contact angle measurements, which show that heparin was grafted on PEEK surface. The contact angles of modified PEEK films were lower than those of original films, demonstrating a significant improvement of surface hydrophilicity.     

Phenylphosphonic acid functionalization of indium tin oxide: surface chemistry and work functions

The work function of indium tin oxide (ITO) substrates was modified with phosphonic acid molecular films. The ITO surfaces were treated prior to functionalization with a base cleaning procedure. The film growth and coverage were quantified by contact angle goniometry and XPS. Film orientation was determined by reflection/absorption infrared spectroscopy using ITO-on-Cr substrates. The absolute work functions of nitrophenyl- and cyanophenyl-phosphonic acid films in ITO were determined by Kelvin probe measurement to be 5.60 and 5.77 eV, respectively.     

Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces

The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.     

Cathodic etching for fabrication of super-hydrophobic aluminum coating with micro/nano-hierarchical structure

A facile method for fabricating super-hydrophobic surfaces on the magnetron sputtering aluminum film by cathodic electrochemical etching followed by the modification of myristic acid was presented in this article. The morphologies and the compositions of the films were characterized by means of scanning electron microscopy (SEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), respectively. The corrosion behavior of the super-hydrophobic film was evaluated by potentiodynamic polarization measurement, linear polarization measurement, and electrochemical impedance spectroscopy. After the treatment with cathodic electrochemical etching, the thin aluminum film remained unbroken and the bulk structure of the aluminum coating maintained a microcrystalline morphology while the surface of the coating presented a petal-shaped microstructure dotted with nano-sized floccules. Aluminum myristate was formed on the nano/microstructural surface of the coating when the sample was modified in melting myristic acid. The static water contact angle on the surface was larger than 165°, which demonstrated that a super-hydrophobic film was prepared on the magnetron sputtering aluminum coating. The corrosion resistance of the aluminum coating was enhanced remarkably because of the super-hydrophobic modification.     

Formation of alkanethiol monolayer on Ge(111).

Alkanethiols, CH3(CH2)(n-1)SH, are shown to react readily with HF-treated Ge(111) surface at room temperature to form a high-quality monolayer. The resulting films are characterized by using contact angle analysis (CAA), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (SE), and high-resolution electron energy loss spectroscopy (HREELS). The octanethiol and octadecanethiol films on Ge(111) both exhibit 101 degrees and 40 degrees water and hexadecane contact angles, respectively. These values indicate that the thiol surface coverage is relatively high, and that the films possess a high degree of orientational ordering. The angle-resolved XPS analysis supports that thiols are bound to the Ge surface by Ge-S bonds at the monolayer/Ge interface. The film thickness values obtained by XPS and SE agree well with the earlier reported values on alkyl monolayers on Ge(111) prepared by Grignard reaction. On the basis of HREEL spectra taken after thermal annealing steps, the monolayers are found to be thermally stable up to 450 K. The thermal stability provides further evidence that thiols are covalently bonded to Ge(111).     

Surface functionalization of ultrananocrystalline diamond films by electrochemical reduction of aryldiazonium salts

The surface functionalization of ultrananocrystalline diamond (UNCD) thin films via the electrochemical reduction of aryl diazonium cations is described. The one-electron-transfer reaction leads to the formation of solution-based aryl radicals, which in turn react with the UNCD surface forming stable covalent C-C bonds. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), ac impedance spectroscopy, and contact angle measurements have been employed to characterize the organic overlayer and estimate the surface coverage. The grafting of 3,5-dichlorophenyl groups renders the UNCD surface hydrophobic, whereas the attachment of 4-aminophenyl groups makes the surface relatively hydrophilic. The surface coverage, estimated from the electrochemical and XPS measurements, is as high as 70% of a compact monolayer. The aminophenyl terminated surface was obtained by electrochemical reduction of the tethered nitrophenyl groups. This two-step approach yields a UNCD surface with functional moieties available for the potential covalent coupling of a wide variety of biomolecules (e.g., DNA and proteins).     

Increasing the Hydrophobicity of a PP Film Using a Helium/CF<Subscript>4</Subscript> DBD Treatment at Atmospheric Pressure

Plasma surface modification is widely used to tailor the surface properties of polymeric materials. Most treatments are performed using low pressure plasma systems, but recently, atmospheric dielectric barrier discharges (DBDs) have appeared as interesting alternatives. Therefore, in this paper, an atmospheric He + CF₄ DBD is used to increase the hydrophobicity of a polypropylene (PP) film. The surface characterization of the PP film is performed using contact angle measurements, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results show that the hydrophobic properties of the polymer films are greatly enhanced after plasma treatment as evidenced by an increased contact angle. The incorporation of fluorine on the surface is significant (45 at%), demonstrating the ability of the used DBD set-up to generate fluorine-containing functional groups on the PP surface.     

Influence of O2 Plasma on Surface Properties of PC-TiO2 Nanocomposite Film

In this work, polycarbonate-TiO₂ nanocomposite films were prepared with different percentages. The aim was to consider the effect of O₂ LF plasma (50 Hz) on the hydrophilicity, surface energy, and surface morphology of polycarbonate and polycarbonate-TiO₂ nanocomposite. Structure of samples was determined by using X-ray diffraction analysis. In comparison with the reference sample, the samples’ structure did not change after plasma treatment. Surface properties of polycarbonate and polycarbonate-TiO₂ nanocomposite films were studied by X-ray photoelectron spectroscopy (XPS), contact angle measurement, atomic force microscopy (AFM), and Vickers microhardness tester. XPS analysis showed that the surface of samples became more oxidized due to plasma treatment. The water contact angle significantly decreased from 88° to 15° after plasma treatment. It was observed that the hardness of the nanocomposite films was not modified after plasma treatment.     

Effects of Ar/H/N‐ion bombardment on the surface free energy and friction behavior of the fullerene‐like hydrogenated carbon (FL‐C:H) film

The surface modification of the fullerene‐like hydrogenated carbon (FL‐C:H) film was achieved by bombardment using Ar, H, and N ions, respectively. A systematic comparison of X‐ray photoelectron spectroscopy (XPS) and Fourier transformation infrared(FTIR) spectra was made between the FL‐C:H film and ion‐bombarded films. The results show that ion bombardment resulted in the increase of sp³ C content, specially, new C? N bonds were formed for N‐ion‐bombarded film. The contact angle (CA) and friction coefficient of those films were measured. The surface free energy evaluated from the contact angle increased for ion‐bombarded films, and the most obvious increase was obtained for N‐ion‐bombarded film. The friction coefficient decreased for H‐ion‐bombarded film whereas it increased for N‐ion‐bombarded film, and the friction coefficient of Ar‐ion‐bombarded film was close to that of the FL‐C:H film. Copyright © 2008 John Wiley & Sons, Ltd.     

Multitechnique surface spectroscopic studies of plasma modified polymers III. H2O and O2/H2O plasma modified poly(methyl methacrylate)s

The surfaces of poly(methyl methacrylate) (PMMA) films modified by O₂H₂O and H₂O radio-frequency glow discharge plasmas were studied using electron spectroscopy for chemical analysis (ESCA or XPS), low energy ion scattering (LEISS or ISS), Fourier transform IR spectroscopy (FTIR) with attenuated total reflectance (ATR) sampling, and critical surface energy from contact angle measurements. The extent and nature of modification with respect to promotion of a hydrophilic surface compared to the hydrophobic surface of the unmodified PMMA has been probed. Results show drastic decreases in C/O ratio at the near surface, which increases to that of the unmodified PMMA as deeper cross sections are analyzed. In addition peak fitting of ESCA data correlated with FTIR functional group information allows for the qualitative and quantitative analysis of the resulting bonding and structure of the modified layer. From these results combined with the polarity and surface energy differences obtained from contact angle measurements, the structural changes are discussed with respect to plasma reaction mechanisms and differences in the structure of the modified polymer films.     

Surface modification of aromatic polyamide film by oxygen plasma

The surface of poly(p-phenylene terephthalamide) (PPTA) films was modified by oxygen plasma, and the modified film surface was analyzed by an advancing contact meter and X-ray photoelectron spectroscopy (XPS). The advancing contact measurement showed that the oxygen plasma treatment made the surface of the PPTA film hydrophilic. The XPS analyses also showed the increase in the O/C and N/C atom ratio, especially the O/C atom ratio, at the PPTA film surface by the oxygen plasma treatment. A main oxygen functionality formed by the oxygen plasma treatment is a carboxylic acid group, and a main nitrogen functionality formed is a protonated amino group. The formation of the oxygen and nitrogen functionalities formed by the oxygen plasma treatment is not restricted to the surface of the PPTA film, but penetrates at least 35 Å deep from the film surface. The formation of these carboxylic acid and protonated amino groups is a result of the bond scission of the amide linkages in the PPTA film. Interactions of photons in the oxygen plasma rather than interactions of electrons and activated oxygen atoms contribute greatly to the bond scission. © 1995 John Wiley & Sons, Inc.     

Bent-core liquid crystal-functionalised flexible polymer substrates for liquid crystal alignment

ABSTRACT

A transparent flexible polymer film is chemically functionalised with a bent-core liquid crystal (BCLC) compound for effective alignment of the bulk BCLC sample at the substrate–LC interface. The surface attachment was achieved via a simple procedure which involved pre-treatment of the polymer film (commercial name: over head projector film) using piranha solution followed by chemically attaching the BCLC compound through silane condensation reaction. Surface characterisation of the unmodified and BC-modified flexible films was carried out through X-ray photoelectron spectroscopy (XPS), attenuated total reflectance fourier transform infrared (ATR-FTIR) spectroscopy, contact angle (CA) and atomic force microscopy (AFM) techniques. The BC-modified flexible substrates are analysed for their efficiency to orient the bulk LC sample. Remarkably, the chemically modified polymer substrates are highly efficient in vertically aligning both the BC and rod-like LC samples at the substrate–LC interface, in comparison to their unmodified counterparts. The described method is simple, reproducible, surface modified substrates are highly stable and more importantly reusable. The demonstrated method for the alignment of BCLCs advances a step forward towards the realisation of applications proposed for these fascinating compounds.     

聚对苯二甲酸乙二酯膜的表面碳氟等离子体改性及XPS取样深度与接触角间的关系

高聚物界面的能量、结构等性质，对理论研究和实际应用都是极为重要的．因为许多聚合物材料都具有一个或多个界面的多相结构，这些界面的结构和强度等，显著地影响着这些多相材料的物理、力学性能等，而它们之间的关系，是一个极为复杂的问题，只有综合界面科学、流变学、...     

Improved cellular adhesion to acetone plasma modified polystyrene surfaces

The plasma polymerization of acetone has been used to modify polystyrene substrates for the controlled growth of human fibroblast cells. The surface modified polystyrene was studied by X-ray photoelectron spectroscopy, water contact angle and atomic force microscopy. This showed the surface oxygen levels and wettability to increase rapidly with exposure to the acetone plasma. High-resolution XPS allowed the determination of the relative amounts of surface hydroxyl, carbonyl and carboxyl groups. This showed that there was little incorporation of carboxyl groups in the deposited films. AFM measurements revealed the films to be conformal with a surface roughness equivalent to that of the underlying polystyrene substrate with film growth rates of approximately 0.5 nm min(-1). High edge-definition patterns were produced with a simple masking procedure and allowed the confinement of cells to selected areas of the substrate. These chemically patterned surfaces allowed the study of cells confined to particular regions of the substrate as a function of incubation time.     

不饱和糖功能单体接枝聚氨酯膜的制备及其血液相容性

通过葡萄糖、丙烯酸羟乙酯和丁二胺反应,制备了含不饱和双键的糖基功能单体。 采用傅里叶红外光谱和核磁共振氢谱对合成的产物进行结构表征确定。 采用紫外光引发接枝聚合技术,将制备的不饱和糖单体接枝聚合到聚氨酯膜的表面,以衰减全反射模式下傅里叶红外光谱对表面接枝反应进行了确认。 通过静态水接触角实验和血小板黏附实验,分别对改性聚氨酯膜表面的亲水性和血液相容性进行了研究,结果表明,改性聚氨酯膜表面的接触角从86°降低到45°,血小板的粘附量由14.36×10³ cells/mm²减少到2.57×10³ cells/mm²,亲水性明显增强,血液相容性显著改善。     

Solution-based assembly of conductive gold film on flexible polymer substrates

Conductive films of gold were assembled on flexible polymer substrates such as Kapton and polyethylene using a solution-based process. The polymer substrates were modified by using argon plasma and subsequent coupling of silanes with amino- or mercapto- terminal groups. These modified surfaces were examined by X-ray photoelectron spectroscopy and contact angle measurements. Colloidal gold was assembled onto the silane-modified surface from solution. The gold particles are attached to the surface by covalent interactions with the thiol or amine group. Formation of a conductive film is achieved by increasing the coverage of gold by using a "seeding" method to increase the size of the attached gold particles. Field emission scanning electron microscopy was used to follow the growth of the film. The surface resistance of the films, measured using a four-point probe, was about 1 Omega/sq.     

Metastable patterning of plasma nanocomposite films by incorporating cellulose nanowhiskers

A new method is presented for developing patterned, thin nanocomposite films by introducing cellulose nanowhiskers during the pulsed plasma polymerization of maleic anhydride. Metastable film structures develop as a combination of dewetting and buckling phenomena. By controlling the maleic anhydride monomer to cellulose nanowhisker weight ratio, the whiskers can be incorporated into a homogeneously covering patterned polymer film. Excess nanowhiskers are required to prevent complete dewetting and deposit dimensionally stable films. The formation of anchoring points is assumed to stabilize the film through a "pinning" effect to the substrate. The latter control the in-plane film stresses, similar to the effects of surface inhomogeneities such as artificial scratches. The different morphologies are evaluated by optical microscopy, AFM, contact angle measurements, and ellipsometry. Further analysis by infrared spectroscopy and XPS suggests esterification between the maleic anhydride and cellulose moieties.