Characterization of Copper(II), nickel(II), cobalt(II) and palladium(II) complexes of vicinal oxime-imine ligands; induced chelate isomerism in the same molecule of the nickel(II) complex

Summary Metal complexes of the title ligands were characterized in order to determine the factors influencing the stability of chelate isomerism in the same molecule. The ligands were prepared by 1:1 condensation of isonitrosoacetylacetone (Hiso) with eithero-aminophenol (H₂ isoaph),p-aminophenol (H₂ isopph), or aniline (Hisoanil). The following complexes have been synthesized: [(isoaph)Cu]₄, (Hisoaph)₂Co, (Hisopph)₂ M·nH₂O (M=Ni(II), n=2;M=Pd(II), n=0;M=Co(II), n=2), [(isopph) Cu·H₂O]₂, and (isoanil)₂ M (M=Ni(II), Cu(II), Co(II), or Pd(II)). Both chelate rings in these metal complexes are five-membered. Transimination of one –C=N–C₆H₅ group to –C=NH in (isoanil)₂Ni produced a six-membered chelate ring in (isoim)Ni(isoanil). The induced chelate isomerism is ascribed to intermolecular hydrogen bonding of the imino-hydrogen and the basic nitrogen of the same six-membered chelate ring of an adjacent square planar molecule. Other types of hydrogen bondings with the oximato oxygen (intra- or intermolecular) favour the formation of five-membered chelate rings. Analytical, spectroscopic, and magnetic moment data are in accordance with the suggested formulations.Part of the Ph.D. thesis of Sana M. Imam     

Building hydrogen-bonded networks from metal complexes containing the heterotopic (N or O) ligand 4,4′-bipyridine-N-monoxide

The heterotopic ligand 4,4′-bipyridine-N-monoxide (BIPYMO) has a rigid, linear structure and contains both a pyridine N-donor and a pyridine-N-oxide O-donor which are capable of coordinating to a metal centre or alternatively acting as a hydrogen bond acceptor. The hydrogen bonding capacity of BIPYMO is first demonstrated by the formation of hydrogen-bonded networks with water and some simple dicarboxylic acids (fumaric = FUM, terephthalic = TPA). It is then shown that BIPYMO can coordinate through the pyridine N-donor to Pd(II) and through the pyridine-N-oxide O-donor to Fe(II), Co(II) and Mn(II). In each case, the peripheral, uncoordinated N- or O-atoms act as a hydrogen bond acceptors and interact with a metal-bound and hydrogen bond donor (H₂O, fumarate = FUM, malonate = MAL, isophthalate = IPA) to form a solid-state, network through a combination of metal–ligand coordination and hydrogen bonding. Single-crystal X-ray structures of {(BIPYMO)(H₂O)₂}_n, {(BIPYMO)(FUM)}_n, {(BIPYMO)(TPA)}_n, {[Pd(BIPYMO)₂(MAL)₂](H₂O)}_n, {[Pd(BIPYMO)₂(IPA)₂](H₂O)₂}_n and {[M(BIPYMO)₂(FUM)₂(H₂O)₂]}_n (M = Mn, Fe, Co), show how the individual building blocks are organised via hydrogen bonding through uncoordinated pyridine N-atoms or pyridine-N-oxide O-atoms to form supramolecular networks.     

Co(III) and Fe(III) complexes of Schiff bases derived from 2,4-dihydroxybenzaldehyde S-allyl-isothiosemicarbazonehydrobromide

Two new complexes, [Co(L¹)(Py)₃]Cl_0.75Br_0.25 (L¹=4-hydroxy salicylaldehyde S-allyl-isothiosemicarbazonato-N,N′,O) and [Fe(L²)Cl]·C₂H₅OH (L²=S-allyl-N¹-(4-hydroxy salicylaldehyde)-N⁴-(salicylaldehyde)isothiosemicarbazide-N,N′,O,O′), have been synthesized and characterized by elemental analysis, FT-IR and UV–vis spectroscopy, and molar conductivity. The solid-state structures of the complexes were also determined by single crystal X-ray diffraction. The iron(III) and cobalt(III) complexes adopt distorted square-pyramidal and octahedral geometries, respectively. The strength of the bonding in these complexes was investigated by thermogravimetric studies with both exhibiting stability with complete decomposition not occurring until ca. 600?°C.     

Determination of Formation Regions of Titanium Phosphates; Determination of the Crystal Structure ofβ-Titanium Phosphate, Ti(PO4)(H2PO4), from Neutron Powder Data

The formation region of the various types of layered titanium hydrogen phosphate hydrates was investigated. The materials were prepared by hydrothermal methods, treating amorphous titanium phosphate with phosphoric acid (8 to 16M) in the temperature range 175 to 250°C. The materials obtained were:α-Ti(HPO₄)₂·H₂O,γ-Ti(PO₄)(H₂PO₄)·2H₂O, and its anhydrous formβ-Ti(PO₄)(H₂PO₄). The structure ofβ-Ti(PO₄)(H₂PO₄) has been determined by Rietveld powder refinement of high resolution neutron diffraction data. The structure is refined in the monoclinic space groupP2₁/n(No. 14). The unit cell parameters are:a=18.9503(4) Å,b=6.3127(1) Å,c=5.1391(1) Å,β=105.366(2)°;Z=4. The final agreement factors were:R_p=2.9% andR_wp=3.8%. The structure ofβ-Ti(PO₄)(H₂PO₄) is built from TiO₆octahedra linked together by tertiary phosphate (PO₄) and dihydrogen phosphate ((OH)₂PO₂) tetrahedra. The layers are held together by hydrogen bonds.     

Synthesis and characterization of nickel(II) complexes with three potentially hexadentate Schiff-base ligands and polyamines: X-ray crystal structure determination of one nickel(II) complex

Three new potentially hexadentate N₄O₂ Schiff-base ligands (H₂L¹, H₂L² and H₂L³) were prepared from the reaction of the polyamines N,N′-bis(2-aminophenyl)-1,2-ethanediamine (L¹), N,N′-bis(2-aminophenyl)-1,3-propanediamine (L²) and N,N′-bis(2-aminophenyl)-1,4-butanediamine (L³), respectively with salicylaldehyde. Reaction of the Schiff bases with Ni(II) salts in the presence of N(Et)₃ gave the neutral complexes [NiL⁴], [NiL⁵] and [NiL⁶]. Ni(II) complexes of the polyamines were also prepared. One of complexes [Ni(L¹)(MeCN)₂](ClO₄)₂·MeCN has been characterized through X-ray diffraction methods.     

Nickel Tetracarbonyl as Starting Material for the Synthesis of NHC-stabilized Nickel(II) Allyl Complexes

A novel, useful in situ synthesis for NHC nickel allyl halide complexes [Ni(NHC)(η³-allyl)(X)] starting from [Ni(CO)₄], NHC and allyl halides is presented. The reaction of [Ni(CO)₄] with (i) one equivalent of the corresponding NHC and (ii) with an excess of the corresponding allyl chloride at room temperature leads with elimination of carbon monoxide to complexes of the type [Ni(NHC)(η³-allyl)(X)]. This approach was used to synthesize the complexes [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 2 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 3 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 4 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Br)] ( 5 ), [Ni(Me₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 6 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 7 ). The complexes 1 to 7 were characterized using NMR and IR spectroscopy and elemental analysis, and the molecular structures are provided for 2 and 7 . The allyl nickel complexes 1 – 7 are stereochemically non-rigid in solution due to (i) NHC rotation about the nickel-carbon bond, (ii) allyl rotation about the Ni–η³-allyl axis and (iii) π–σ–π allyl isomerization processes. The allyl halide complexes can be methylated as was demonstrated by the methylation of a number of the complexes [Ni(NHC)(η³-allyl)(X)] with methylmagnesium chloride or methyllithium, which led to isolation of the complexes [Ni(Me₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 8 ), [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 9 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 10 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 11 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Me)] ( 12 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 13 ). These complexes were fully characterized including X-ray molecular structures for 10 and 11 .     

Syntheses,characterization, and antimicrobial properties of nickel(II) dithiocarbamate complexes containing NiS4 and NiS2PN moieties

Three Ni(II) dithiocarbamate complexes, [Ni(buphdtc)₂] (1), [Ni(buphdtc)(PPh₃)(NCS)] (2) and [Ni(buphdtc)(PPh₃)(NC)] (3) (where bu = butyl and ph = phenyl), were synthesized and characterized by elemental analysis, UVvis, and FTIR spectroscopies. Complexes 1 and 2 were further characterized by single-crystal X-ray structural analysis. The single-crystal X-ray structural analysis indicates a slightly distorted square planar geometry. In 2 and 3, the influences of the auxiliary ligands (PPh₃, NCS, and NC) on their steric and electronic properties were observed. Thermal studies of the complexes showed decomposition starting at 250–300 °C, leading to formation of nickel sulfide phases around 400 °C. The complexes were screened against some bacteria strains, Staphylococcus aureus, Streptococcus pneumoniae, Bacillus subtilis, Escherichia coli, Klebsiella oxytoca and Pseudomonas aeruginosa, and two fungi species, Aspergillus niger and Fusarium oxysporum. The complexes showed moderate-to-strong antimicrobial potentials, with [Ni(buphdtc)₂] (1) displaying the best antimicrobial activity. Fluconazole and streptomycin were used as reference drugs for antifungal and antibacterial assays, respectively.     

Chiral resolution of l- and d-alanine and a racemic macrocyclic nickel(II) complex: synthesis and crystal structures

The reactions of a racemic four-coordinate Ni(II) complex [Ni(rac-L)](ClO₄)₂ with l- and d-alanine in acetonitrile/water gave two six-coordinate enantiomers formulated as [Ni(RR-L)(l-Ala)](ClO₄)·2CH₃CN (1) and [Ni(SS-L)(d-Ala)](ClO4) (2) (L = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclo-tetradecane, Ala^? = alanine anion), respectively. Evaporation from the remaining solutions gave two four-coordinate enantiomers characterized as [Ni(SS-L)](ClO₄)₂ (S-3) and [Ni(RR-L)](ClO₄)₂ (R-3), respectively. Single-crystal X-ray diffraction analyses of complexes 1 and 2 revealed that the Ni(II) atom has a distorted octahedral coordination geometry, being coordinated by four nitrogen atoms of L in a folded configuration, plus one carboxylate oxygen atom and one nitrogen atom of l- or d-Ala^? in mutually cis-positions. Complexes 1 and 2 are supramolecular stereoisomers, constructed via hydrogen bonding between [Ni(RR-L)(l-Ala)]⁺ or [Ni(SS-L)(d-Ala)]⁺ monomers to form 1D hydrogen-bonded zigzag chains. The homochiral natures of complexes 1 and 2 have been confirmed by CD spectroscopy.     

Bis(di‐2‐pyridylamine‐κ2N2,N2′)(nitrato‐κ2O,O′)nickel(II) nitrate

<!?tpct=26.8pt>In the ionic title compound, [Ni(NO₃)(C₁₀H₉N₃)₂]NO₃, the central Ni^II atom exhibits cis‐NiN₄O₂ octahedral coordination with three chelating ligands, viz. one nitrate anion and two di‐2‐pyridylamine (dpya) molecules. A second nitrate group acts as a counter‐ion. The complex cations and the nitrate anions are also linked by N—H...O hydrogen bonds. The compound was prepared in two different reproducible ways: direct synthesis from Ni(NO₃)₂ and dpya yielded systematically twinned crystals (the twinning law is discussed), while single crystals were obtained unexpectedly from the Ni(NO₃)₂/dpya/maleic acid/NaOH system.     

Ruthenium(II) complexes containing bidentate Schiff bases and their antifungal activity

The reactions of ruthenium(II) complexes, [RuHCl(CO)(PPh₃)₂(B)] [B = PPh₃, pyridine (py) or piperidine (pip)], with bidentate Schiff base ligands derived by condensing salicylaldehyde with aniline, o-, m- or p-toluidine have been carried out. The products were characterised by analytical, i.r., electronic, ¹H-n.m.r. and ³¹P-n.m.r. spectral studies and are formulated as [RuCl(CO)(L)(PPh₃)(B)] (L = Schiff base anion; B = PPh₃, py or pip). An octahedral structure has been tentatively proposed for the new complexes. The Schiff bases and the new complexes were tested in vitro to evaluate their activity against the fungus Aspergillus flavus.     

Synthesis and crystal structures of nickel(II) supramolecules containing hexaazamacrocycles and aromatic carboxylate ligands

Two new nickel(II) complexes, {[Ni(L)(4,4′-bpdc)] · 3H₂O} _n (1) and {[Ni(L)(2,6-ndc)] · 2CH₃CN} _n (2) (L = 1,8-dihydroxylethyl-1,3,6,8,10,13-hexaazacyclotetradecane, 4,4′-bpdc = 4,4′-biphenyldicarboxylate, 2,6-ndc = 2,6-naphthalenedicarboxylate), have been synthesized and structurally characterized by spectroscopic and X-ray diffraction methods. Compound 1 shows a 3-D supramolecule which is composed of two different series of 1-D coordination polymers, where each 1-D chain runs in different directions and interacts by π–π stacking at the intersection. Compound 2 contains 1-D coordination polymers in which 1-D chains run in the same direction. The 1-D chains are interconnected by hydrogen bonds in an undulated fashion to form a 3-D supramolecule.     

Polymer complexes. LXX. Synthesis,spectroscopic studies,thermal properties and antimicrobial activity of metal(II) polymer complexes

The monomer 3‐allyl‐5‐(phenylazo)‐2‐thioxothiazolidine‐4‐one (HL) was prepared by the reaction of allyl rhodanine with aniline through diazo‐coupling reaction. Reaction of HL with Ni(II) or Co(II) salts gave polymer complexes ( 1 – 8 ) with general stoichiometries [M(HL)(Cl)₂(OH₂)₂]_n, [M(HL)(O₂SO₂)(OH₂)₂]_n, [M(L)(O₂NO)(H₂O)₂]_n and [M(L)(O₂CCH₃)(H₂O)₂]_n (where M = Ni(II) or Co(II)). The structures of the polymer complexes were identified using elemental analysis, infrared and electronic spectra, molar conductance, magnetic susceptibility, X‐ray diffraction and thermogravimetric analysis. The interaction between the polymer complexes and calf thymus DNA showed a hypochromism effect. HL and its polymer complexes were tested against bacterial and fungal species. Co(II) polymer complex 2 is the most effective against Klebsiella pneumoniae and is more active than penicillin. The results showed that Ni(II) polymer complex 5 is a good antibacterial agent against Staphylococcus aureus and Pseudomonas aeruginosa. Molecular docking was used to predict the binding between the monomer with the receptors of prostate cancer (PDB code: 2Q7L Hormone) and breast cancer (PDB code: 1JNX Gene regulation). Coats–Redfern and Horowitz–Metzger methods were applied for calculating the thermodynamic parameters of HL and its polymer complexes. The thermal activation energy of decomposition for HL is higher than that for the polymer complexes.     

Nickel(II) and zinc(II) complexes of N-substituted di(2-picolyl)amine derivatives: Synthetic and structural studies

The interaction of di(2-picolyl)amine (1) and its secondary N-substituted derivatives, N-(4-pyridylmethyl)-di(2-picolyl)amine (2), N-(4-carboxymethyl-benzyl)-di(2-picolyl)amine (3), N-(4-carboxybenzyl)-di(2-picolyl)amine (4), N-(1-naphthylmethyl)-di(2-picolyl)amine (5), N-(9-anthracenylmethyl)-di(2-picolyl)amine (6), 1,4-bis[di(2-picolyl)aminomethyl]benzene (7), 1,3-bis[di(2-picolyl)aminomethyl]benzene (8) and 2,4,6-tris[di(2-picolyl)amino]triazine (9) with Ni(II) and/or Zn(II) nitrate has resulted in the isolation of [Ni(1)(NO₃)₂], [Ni(2)(NO₃)₂], [Ni(3)(NO₃)₂], [Ni(4)(NO₃)₂]·CH₃CN, [Ni(5)(NO₃)₂], [Ni(6)(NO₃)₂], [Ni₂(7)(NO₃)₄], [Ni₂(8)(NO₃)₄], [Ni₃(9)(NO₃)₆]·3H₂O, [Zn(3)(NO₃)₂]·0.5CH₃OH, [Zn(5)(NO₃)₂], [Zn(6)(NO₃)₂], [Zn(8)(NO₃)₂] and [Zn₂(9)(NO₃)₄]·0.5H₂O. X-ray structures of [Ni(4)(NO₃)₂]·CH₃CN, [Ni(6)(NO₃)₂] and [Zn(5)(NO₃)₂] have been obtained. Both nickel complexes exhibit related distorted octahedral coordination geometries in which 4 and 6 are tridentate and bound meridionally via their respective N₃-donor sets, with the remaining coordination positions in each complex occupied by a monodentate and a bidentate nitrato ligand. For [Ni(4)(NO₃)₂]·CH₃CN, intramolecular hydrogen bond interactions are present between the carboxylic OH group on one complex and the oxygen of a monodentate nitrate on an adjacent complex such that the complexes are linked in chains which are in turn crosslinked by intermolecular offset π-π stacking between pyridyl rings in adjacent chains. In the case of [Ni(6)(NO₃)₂], two weak CH?O hydrogen bonds are present between the axial methylene hydrogen atoms on one complex and the oxygen of a monodentate nitrate ligand on a second unit such that four hydrogen bonds link pairs of complexes; in addition, an extensive series of π-π stacking interactions link individual complex units throughout the crystal lattice. The X-ray structure of [Zn(5)(NO₃)₂] shows that the metal centre once again has a distorted six-coordinated geometry, with the N₃-donor set of N-(1-naphthylmethyl)-di(2-picolyl)amine (5) coordinating in a meridional fashion and the remaining coordination positions occupied by a monodentate and a bidentate nitrato ligand. The crystal lattice is stabilized by weak intermolecular interactions between oxygens on the bound nitrato ligands and aromatic CH hydrogens on adjacent complexes; intermolecular π-π stacking between aromatic rings is also present.     

Preparation and cytotoxic activity of nickel(II) complexes with 6-benzylaminopurine derivatives

Nickel(II) complexes with 6-benzylaminopurine (BAP) derivatives, namely 6-(3-chlorobenzylamino)purine (HL₁), 6-(4-chlorobenzylamino)purine (HL₂) and 6-(4-fluorobenzylamino)purine (HL₃), have been prepared and characterized by elemental analyses, i.r., u.v.–v.i.s., ES+ and FAB+ mass spectroscopy, magnetic susceptibility and conductivity measurements, and by thermal analysis. The complexes are: [Ni(L₁(H₂O)₂Cl] · H₂O, [Ni(L₁)(H₂O)-(NO₃)] · H₂O, [Ni(L₂)(H₂O)₂Cl], [Ni(L₂)(H₂O)₂(NO₃)] · H₂O, [Ni(HL₂)(H₂O)Cl₂] · EtOH and [Ni(L₃)(H₂O)₂Cl]. They have been tested in vitro for their possible cytotoxic activity against G-361 (human malignant melanoma), HOS (human osteogenic sarcoma), K-562 (human chronic myelogenous leukemia) and MCF-7 (human breast adenocarcinoma) cell lines.     

The influence of aniline and its derivatives on the corrosion behaviour of copper in acid solution

The inhibiting action of aniline and its derivatives on the corrosion of copper in hydrochloric acid has been investigated, with emphasis on the role of substituents. With this purpose five different anilines were selected: aniline, p-chloro aniline, p-nitro aniline, p-methoxy and p-methyl aniline. The electrochemical and gravimetric results, obtained in the absence and presence of different concentrations of inhibitors, revealed that aniline reduces the corrosion of copper, with a critical concentration of 10^–2 M. Furthermore, the interaction energy calculated as G_ads gave a value of 4.2 kcal mol^–1 indicating physisorption of the organic compound at the copper surface. The results have also shown that substituents, either electron donors (–CH₃, –OCH₃) or, electron acceptors (–NO₂, –Cl) in para position, decrease the inhibition action of aniline. A theoretical study using molecular mechanic and ab initio Hartree Fock methods, to model the adsorption of aniline on copper (100) showed results in good agreement with the experimental data. Aniline adsorbs parallel to the copper surface, showing no preference for a specific adsorption site. On the other hand, from ab initio Hartree Fock calculations, an adsorption energy between 2 kcal/mol and 5 kcal/mol is obtained, which is close to the experimental value, confirming that the adsorption of aniline on the metal substrate is rather weak. In view of these results, the orientation of the aniline molecule with respect to the copper surface is considered to be the dominant effect.     

Bis-(bis-(1,3-diaminopropane)-copper(II) Tetracyanonickellate(II)) Tetrahydrate: Preparation, Characterization, and Crystal Structure of a Novel Molecular Tetracyanonickellate

Summary.  [Cu(tn)₂Ni(CN)₄]₂ċ4H₂O and Cu(tn)₂Ni(CN)₄ (tn = 1,3-diaminopropane) were prepared and characterized. The hydrate is unstable on air and readily dehydrates to Cu(tn)₂Ni(CN)₄. Crystal structure analysis of the hydrate at 150 K revealed a novel tetranuclear molecular structure of the tetracyanonickellate. The building elements are two [Cu(tn)₂]²⁺ cations (coordination numbers of Cu: 5 and 6, respectively), two [Ni(CN)₄)²⁻ anions, and crystal water. The two cations are linked by one tetracyanonickellate anion via bridging cyano groups placed in cis positions. The second anion is bound weakly (Cu-N = 2.82 ?) via one μ₂-bridging cyano ligand. The tetranuclear molecules and pairs of solvate water molecules are linked by strong hydrogen bonds, thus forming infinite planes which are linked in the third dimension by considerably weaker hydrogen bonds. Received May 9, 2000. Accepted (revised) August 21, 2000     

Bis -( bis -(1,3-diaminopropane)-copper(II) Tetracyanonickellate(II)) Tetrahydrate: Preparation, Characterization, and Crystal Structure of a Novel Molecular Tetracyanonickellate

 [Cu(tn)₂Ni(CN)₄]₂ċ4H₂O and Cu(tn)₂Ni(CN)₄ (tn = 1,3-diaminopropane) were prepared and characterized. The hydrate is unstable on air and readily dehydrates to Cu(tn)₂Ni(CN)₄. Crystal structure analysis of the hydrate at 150 K revealed a novel tetranuclear molecular structure of the tetracyanonickellate. The building elements are two [Cu(tn)₂]²⁺ cations (coordination numbers of Cu: 5 and 6, respectively), two [Ni(CN)₄)²⁻ anions, and crystal water. The two cations are linked by one tetracyanonickellate anion via bridging cyano groups placed in cis positions. The second anion is bound weakly (Cu-N = 2.82 ?) via one μ₂-bridging cyano ligand. The tetranuclear molecules and pairs of solvate water molecules are linked by strong hydrogen bonds, thus forming infinite planes which are linked in the third dimension by considerably weaker hydrogen bonds.     

Pentamethylcyclopentadienylruthenium(II) Complexes: Synthesis,Characterization and Catalytic Activity in Aryl–Aryl Coupling

Ruthenium(II) complexes of the type [Ru(PPh₃)( ⁵-C₅Me₅)L] have been synthesized by the reactions of [RuCl(PPh₃)₂( ⁵-C₅Me₅)] with Schiff bases having the (N, O) donor atoms. The Schiff bases used in this study were prepared by condensing the appropriate aniline with salicylaldehyde or 2-hydroxy-1-naphthaldehyde in a 1:2 molar ratio respectively. The complexes were characterized by analytical, spectral (i.r., electronic and ¹H-n.m.r.) data. The new complexes have been used as catalysts in aryl–aryl coupling reactions.     

Synthesis and crystal structure of aqua(diaminobithiazole) (iminodiacetato)nickel(II) hydrate

Crystals of the title compound, [(C₆H₆N₄S₂)(C₄H₅NO₄)(H₂O)Ni]·H₂O, consist of the Ni(II) complex and lattice water. The Ni(II) complex adopts a distorted octahedral coordination geometry formed by an iminodiacetate anion (IDA), a diaminobithiazole (DABT) and a coordinated water molecule. A twisted configuration of DABT is the distinguishing feature in the complex, the dihedral angle between thiazole rings of DABT being 20.04(8)°. An aromatic stacking interaction occurs between thiazole rings from neighboring complex molecules, and is considered as the reason for the twisted configuration. The tridentate IDA dianion chelates to a Ni(II) atom in afacialconfiguration. A hydrogen bond network holds the complex molecules together to form a supramolecular structure.     

Synthesis, characterization, and norbornene polymerization of η-benzylnickel(II) complexes of N-heterocyclic carbenes

Neutral η¹-benzylnickel carbene complexes, [Ni(η¹-CH₂C₆H₅)(IiPr)(PMe₃)(Cl)] (3) (IiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene) and [Ni(η¹-CH₂C₆H₅)(SIiPr)(PMe₃)(Cl)] (4) (SIiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazolin-2-ylidene), were prepared by the reaction between [Ni(η³-CH₂C₆H₅)(PMe₃)(Cl)] and an equivalent amount of the corresponding free N-heterocyclic carbene. The preparation of η³-benzylnickel carbene complexes, [Ni(η³-CH₂C₆H₅)(IiPr)(Cl)] (5) and [Ni(η³-CH₂C₆H₅)(SIiPr)(Cl)] (6) were carried out by the abstraction of PMe₃ from 3 and 4 by the treatment of B(C₆F₅)₃. The treatment of AgX on 5 and 6 produced the anion-exchanged complexes, [Ni(η³-CH₂C₆H₅)(NHC)(X)] (7, NHC = IiPr, X = O₂CCF₃; 8, NHC = IiPr, X = O₃SCF₃; 9, NHC = SIiPr, X = O₂CCF₃; 10, NHC = SIiPr, X = O₃SCF₃). The solid state structures of 3 and 10 were determined by X-ray crystallography. The η³-benzyl complexes of IiPr (5, 7, and 8) alone, in the absence of any activators such as borate and MAO, showed good catalytic activity towards the vinyl-type norbornene polymerization. The catalyst was thermally robust and the activity increases as the temperature rises to 130 °C.