脉冲形成线用CaO-TiO2-Al2O3基介质陶瓷介电性能

设计了一种脉冲形成线用新型CaO-TiO2-Al2O3基介质陶瓷体系,采用传统固相法通过优化组分和制备工艺,调控材料的微结构,获得了介电性能优异的介质陶瓷。其介电常数在15~35之间可调,介电损耗小于0.002,频率稳定性好。在厚度为1 mm时,介电强度高达50 kV/mm。研究了厚度对CaO-TiO2-Al2O3基介质陶瓷介电强度的影响规律,当厚度从1 mm减小到0.1 mm时,介电强度呈非线性增大,从50 kV/mm（1 mm厚样品）提高到92 kV/mm（0.1 mm厚样品）,可见,CaO-TiO2-Al2O3基介质陶瓷的电击穿与其机械损坏具有相似性。结合CaO-TiO2-Al2O3基介质陶瓷的化学组分和微观结构,CaO-TiO2-Al2O3基介质陶瓷优越的电击穿特性可以用弱点击穿理论解释。     

估算线筒式介质阻挡放电场强和电子平均动能的方法

利用静电场模型对线筒式介质阻挡放电电场强度进行了计算,并对电子平均动能进行了估算。通过对单双介质阻挡放电(DBD)的对比,发现在相同的放电条件下,双介质DBD产生的电场强度和电子平均动能比单介质DBD的要大。这就很好地解释了在相同的放电参数下,甲苯的降解效率在双介质DBD中要比单介质DBD中大。     

������Ͳʽ�����赲�ŵ糡ǿ�͵���ƽ�����ܵķ���

The electric field strength and electron mean kinetic energy in co-axial dielectric barrier discharge (DBD) were estimated based on static electric filed model. Through the comparison of the single dielectric layer DBD with the double dielectric layer DBD, it was found the electric field strength and electron mean kinetic energy in double dielectric layer DBD are greater than that in the single dielectric layer DBD under the same electrode configuration and discharge conditions. The calculation results can successfully applied to explain the toluene degradation efficiency in double dielectric layer DBD is larger than that in the single dielectric layer DBD under the same discharge parameters.     

通过介电谱来研究不同物理材料电介质的实验方法

本通过介绍用新型介电谱仪的实验方法，研究不同物理材料电介质的介电常数，进而更深一步了解介电常数所引发的电介质广阔领域。     

Experimental study of air-core dielectric tube at terahertz frequencies

In this paper, an experimental study of air-core dielectric tube waveguide is proposed at terahertz frequencies. By using the THz time domain measure system, the terahertz dispersion characteristics, loss characteristic and energy focusing characteristic of air-core single-layer and dual-layer dielectric tube are obtained. The results show that this type of air-core dielectric tube can realize low dispersion characteristics. Due to the difference of refractive index between two dielectric materials, stronger energy focusing can be achieved in air-core dual-layer dielectric tube. After the coupling of the THz pulse using the dual-layer dielectric tube waveguide, the THz pulse increased 2.4 times compared with the single-layer dielectric tube waveguide at 1.5 THz.     

Effects of dielectric core and embedding medium on plasmonic coupling of gold nanoshell arrays

The effects of the dielectric core and the dielectric embedding medium separately on transmission spectra and plasmon resonance properties of gold nanoshell arrays were investigated by using the finite-difference time-domain (FDTD) theory. It is found that when the hollow nanoshell arrays are placed in air, the wide photonic band gap becomes narrower as the core dielectric constant increases. On the contrary, when the nanoshell arrays with dielectric core are placed in the dielectric medium, the photonic band gap becomes wider. Furthermore, increasing core or medium dielectric constant leads to a redshift of the transmission spectra due to the polarization of the dielectric. Based on the electric field distributions, we also clearly show that the plasmon properties of the nanoshell arrays are strongly influenced by the presence of the dielectric.     

The dependence of dielectric properties on the thickness of (Ba,Sr)TiO3 thin films

In the dielectric (Ba,Sr)TiO₃ thin films, the correlation between the film thickness and the dielectric properties was investigated. The dielectric properties such as the dielectric constant (ε) and dielectric loss (tan δ) were measured using the capacitor geometry. As the film thickness increased, the dielectric constant also increased due to the reduction of the interfacial dead-layer effect. However, the dielectric loss did not show a monotonous variation with the increasing film thickness. It was found that the dielectric loss correlated well with the non-uniform distribution of local strain, as analyzed by X-ray diffraction, according to the Curie–von Schweidler relaxation law.     

Dielectric properties of electrolytic solutions

The variation in dielectric properties of water with the addition of ionic salts have been measured using automated frequency domain experimental microwave C-band. The dielectric properties, that is dielectric constant (ε′) and dielectric loss (ε″) of two electrolyte solutions for various concentrations have been measured at 5-GHz frequency at room temperature. It has been observed that for concentration between 0.2 to 1.0 mole the dielectric constant of water is smaller and some larger than that of pure water and dielectric loss increases with increasing concentration of these salts. It has been also observed that the variation in dielectric loss is different, though the ionic concentration of the two salts are equal.     

Finely-reconciled high dielectric constant and low dielectric loss in ternary polymer/Cr2C3/montmorillonite composite films by filler-synergy strategy

Polymer/conductive ceramic composites with high dielectric constant have become research hotspot of dielectric capacitor materials. However, the conductivity and dielectric loss increase when high dielectric constant is achieved. In order to reconcile high dielectric constant and low dielectric loss, in this study, poly (vinylidene fluoride) (PVDF)/chromium carbide (Cr₂C₃)/montmorillonite (MMT) ternary composite films were prepared by solution cast. Dielectric response based on interfacial polarization was improved and dielectric constant of composites was increased. MMT ceramic was used to suppress interface leakage current. Compared with PVDF/Cr₂C₃ composites, the conductivity and dielectric loss of ternary composites were reduced.     

Temperature dependence of the dielectric constant of acrylic dielectric elastomer

The dielectric constant is an essential electrical parameter to the achievable voltage-induced deformation of the dielectric elastomer. This paper primarily focuses on the temperature dependence of the dielectric constant (within the range of 173 K to 373 K) for the most widely used acrylic dielectric elastomer (VHB 4910). First the dielectric constant was investigated experimentally with the broadband dielectric spectrometer (BDS). Results showed that the dielectric constant first increased with temperature up to a peak value and then dropped to a relative small value. Then by analyzing the fitted curves, the Cole–Cole dispersion equation was found better to characterize the rising process before the peak values than the Debye dispersion equation, while the decrease process afterward can be well described by the simple Debye model. Finally, a mathematical model of dielectric constant of VHB 4910 was obtained from the fitted results which can be used to further probe the electromechanical stability of the dielectric elastomers.