Ideal gas flow behind a finite-amplitude shock wave

The equations of one-dimensional (with a plane of symmetry) adiabatic motion of an ideal gas are transformed to a form convenient for studying flows between a moving piston and a shock wave of variable intensity. The solution is found for the equations of a motion containing a shock wave which propagates through a quiescent gas with variable initial density and constant pressure. This solution contains four arbitrary constants and, in a particular case, gives an example of adiabatic shockless compression by a piston of a gas initially at rest.     

Three-dimensional isothermal lava flows over a non-axisymmetric conical surface

Within the thin-layer approximation for a highly-viscous heavy incompressible fluid, a hydrodynamicmodel of a 3D isothermal lava flow over a non-axisymmetric conical surface is constructed. Using analytical methods, a self-similar solution for the law of leading-edge propagation is obtained in the case of a flow from a non-axisymmetric source located at the apex of a conical surface with smoothly varying properties. In the case of a flow over a substantially non-axisymmetric surface, it is shown that there exists a self-similar solution for the free-surface shape and the law of leading-edge motion. This solution is studied numerically for particular examples of the substrate surface and the source. In the general case of a non-self-similar flow over a substantially non-axisymmetric conical surface, a local analytical solution is obtained for the free-surface shape and the velocity field near the leading flow front.     

A Eulerian/Lagrangian model to calculate the evolution of a water droplet spray

We introduce a Eulerian/Lagrangian model to compute the evolution of a spray of water droplets inside a complex geometry. To take into account the complex geometry we define a rectangular mesh and we relate each mesh node to a node function which depends on the location of the node. The time-dependent incompressible and turbulent Navier-Stokes equations are solved using a projection method. The droplets are regarded as individual entities and we use a Lagrangian approach to compute the evolution of the spray. We establish the exchange laws related to mass and heat transfer for a droplet by introducing a mass transfer coefficient and a heat transfer coefficient. The numerical results from our model are compared with those from the literature in the case of a falling droplet in the atmosphere and from experimental investigation in a wind tunnel in the case of a polydisperse spray. The comparison is fairly good. We present the computation of a water droplet spray inside a complex and realistic geometry and determine the characteristics of the spray in the vicinity of obstacles.     

Practical techniques for a three‐dimensional FEM analysis of incompressible fluid flow contained with slip walls and a downstream tube bundle

Two practical techniques are proposed in this paper to simulate a flow contained in a plenum with a downstream tube bundle under a PC environment. First, a technique to impose slip wall conditions on smooth‐faced planes and sharp edges is proposed to compensate for the mesh coarseness relative to boundary layer thickness. In particular, a new type of Poisson equation is formulated to simultaneously satisfy both such velocity boundary conditions on walls and the incompressibility constraint. Second, a numerical model for a downstream tube bundle is proposed, where hydraulic resistance in a tube is imposed as a traction boundary condition on a fluid surface contacting the tube bundle end. The effectiveness of the techniques is numerically demonstrated in the application to a flow in a condenser water box. Copyright © 2001 John Wiley & Sons, Ltd.     

Draft of a nozzle with the circulating outflow of a vortical flow of gas

The presence of circulation in an outflowing gas leads to a change in the working parameters of a nozzle. The question of the mass flow rate and the draft of a nozzle without a diffusor (a point) for twisted flows has been studied theoretically and experimentally [1–6]. The use of nozzles with a supersonic part introduces a considerable degree of complication into the method for the analytical calculation of the draft characteristics and the program for their experimental investigation. In [2, 7], a theory of a nozzle is formulated for a model of a potential circulating flow of gas; in [5, 8], an electronic computer was used to solve the complete system of the equations of gasdynamics for the motion of a rotating flow along a nozzle; in [7, 9], an investigation was made of a variational problem of the shaping of a diffusor for a circulation flow. The calculation of the draft, carried out in the above-mentioned communications (with the exception of [2], in which a study was made of a partial model of an eddyless rotational motion), is bound up with labor-consuming computer calculations. In the present article, in a development of [3, 6], a quasi-one-dimensional theory of a supersonic nozzle for a vortical flow of gas is formulated and verified experimentally.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 145–149, September–October, 1975.     

Weak–Strong Uniqueness of Dissipative Measure-Valued Solutions for Polyconvex Elastodynamics

For the equations of elastodynamics with polyconvex stored energy, and some related simpler systems, we define a notion of a dissipative measure-valued solution and show that such a solution agrees with a classical solution with the same initial data, when such a classical solution exists. As an application of the method we give a short proof of strong convergence in the continuum limit of a lattice approximation of one dimensional elastodynamics in the presence of a classical solution. Also, for a system of conservation laws endowed with a positive and convex entropy, we show that dissipative measure-valued solutions attain their initial data in a strong sense after time averaging.     

Effect of boundaries of various shapes on vortex dynamics

The motion of a vortex near a boundary of arbitrary shape is considered within the framework of a two-dimensional problem. Integrable differential equations of motion are obtained. Two forms of the algebraic equation of the vortex trajectories are derived. Examples of vortex motion near a straight-line boundary, in a channel, in an angular domain, in the neighborhood of a flat edge, in a round basin, and near a parabolic boundary.     

Configurations of gas-liquid two-phase bubbles in immiscible liquid media

The configuration of a “two-phase bubble” constituted of a gas phase and a liquid phase in an immiscible liquid medium is classified into three types: complete engulfing of a gas bubble inside a liquid shell, partial coalescence of a gas bubble and a liquid drop forming a three-phase contact line, and non-coalescence whereby a gas bubble and a liquid drop remain separated. Simple criteria have been presented by which the favorable type of configuration in a given system is predicted from the values of the spreading coefficients characterizing the system. Experiments using some combinations of liquids as well as air suggest the general validity of the criteria.     

The extension and oscillation of a non-Hooke's law spring

We derive a wave equation for small-amplitude, undamped, extensional oscillation of a spring-mass system consisting of a mass suspended on a spring governed by a quadratic force-extension relationship. We justify this quadratic model using a Taylor series expansion of the general elasticity equations for a helical spring. Transformation of the equation of motion of the spring leads to a separable wave equation with the spacial component being a transformation of Bessel's equation. The model is successful in predicting static extension and period of oscillation of a helical wire spring for which the wave equation based on Hooke's law is inadequate.     

Bifurcations of rotating structures in a parabolic functional differential equation

We investigate the Andronov-Hopf bifurcation of the birth of a periodic solution from a space-homogeneous stationary solution of the Neumann problem on a disk for a parabolic equation with a transformation of space variables in the case where this transformation is the composition of a rotation by a constant angle and a radial contraction. Under general assumptions, we prove a theorem on the existence of a rotating structure, deduce conditions for its orbital stability, and construct its asymptotic form. __________ Translated from Neliniini Kolyvannya, Vol. 9, No. 2, pp. 155–169, April–June, 2006.     

Draining thin films—Part 1

In this, the first of a series of papers on the drainage of a thin film of non-Newtonian liquid down a vertical surface, a parametric solution is obtained for liquids with a shear-rate dependent viscosity and a prescribed initial profile. Experimental measurement of the mass of fluid remaining on a surface as a function of drainage time agrees with the theory.     

Deformability of thin metal films on elastomer substrates

Recent applications in flexible electronics require that thin metal films grown on elastomer substrates be deformable. However, how such laminates deform is poorly understood. While a freestanding metal film subject to tension will rupture at a small strain by undergoing a necking instability, we anticipate that a substrate will retard this instability to an extent that depends on the relative stiffness and thickness of the film and the substrate. Using a combination of a bifurcation analysis and finite element simulations, we identify three modes of tensile deformation. On a compliant elastomer, a metal film forms a neck and ruptures at a small strain close to that of a freestanding film. On a stiff elastomer, the metal film deforms uniformly to large strains. On an elastomer of intermediate compliance, the metal film forms multiple necks, deforms much beyond the initial bifurcation, and ruptures at a large strain. Our theoretical predictions call for new experiments.     

On configurational balance in slender bodies

We propose a new derivation of the evolution equation of a sharp, coherent interface in a two-phase body having elongated shape, a body which we regard as a one-dimensional micropolar continuum. To this aim, we introduce a system of forces acting at the interface, and we apply the method of virtual powers to derive a balance law involving these forces. By exploiting the dissipation inequality, we manage to write this balance law in terms of a scalar field whose form is reminiscent of a well-known expression for the configurational stress in three dimensional micropolar continua.     

Establishment of Waves Generated by a Pulsating Source in a Finite-Depth Fluid

A correct solution of Sretenskii’s plane problem of a source pulsating in a finite-depth fluid is derived. The solution is found using generalized functions as a limit in the infinite future of a wave regime generated by a source which starts to execute pulsations in a fluid initially at rest at a certain moment of time.     

Motion of a solidcontaininga spherical damper

For the purpose of modeling the motion of a solid with a cavity filled with a viscous fluid, M. A. Lavrent'ev [1] has proposed a model in the form of a solid with a spherical cavity in which another solid, spherical in shape, is enclosed. The sphere is separated from the cavity walls by a small, clearance in which viscous forces act (a lubricating film). This simple model with a finite number of degrees of freedom possesses certain mechanical properties of a solid with a cavity containing a viscous fluid. Study of this model is therefore of interest.The present paper examines certain properties of the model, which will be termed a solid with a damper. It is shown that for a highviscosity lubricant the motion of a solid with a damper can be described by the same equations which pertain to the motion of a solid with a spherical cavity filled with a high-viscosity fluid. Expressions relating the parameters of the systems are obtained. If these relations are fulfilled, the systems become mechanically equivalent.The steady motions of a free solid with a damper and their stability conditions are determined.These motions and stability conditions hold for a body with a cavity filled with a viscous fluid [2].     

Open boundary condition symposium benchmark solution: Stratified flow over a backward-facing step

This paper presents a detailed numerical solution to a simplified version of two-dimensional stratified flow over a backward-facing step with a Froude number of 16/9, a Reynolds number of 800 and a Prandtl number of 1—one of the Open Boundary Condition Symposium test problems. The steady state solution was derived by integrating the time-dependent Boussinesq equations forward in time using a semi-implicit finite-element-based model on a 38400-element mesh. In addition to presenting the results derived on this grid, the paper also presents the results of a Richardson extrapolation calculation for a set of ‘key’ parameters. It is hoped that this solution can be used as a baseline to compare the performance of the various techniques discussed at the Open Boundary Condition Symposium.     

Flow of a gas behind a Chapman-Jouguet detonation wave in the vicinity of a line of discontinuity of a surface wave curvature

This paper discusses questions of constructing a solution of the gasdynamic equations near a line of curvature discontinuity at the surface of a detonation wave, propagating under Chapman—Jouguet conditions. It describes the construction of the solution in two cases: in a flow arising with the initiation of a detonation along a half-plane in a quiescent homogeneous combustible gas and in a flow arising with the initiation of a detonation along a half-line under these same conditions.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 120–126, January–February, 1978.     

Control of Tollmien�CSchlichting instabilities by finite distributed wall actuation

Tollmien?CSchlichting waves are one of the key mechanisms triggering the laminar-turbulent transition in a flat-plate boundary-layer flow. By damping these waves and thus delaying transition, skin friction drag can be significantly decreased. In this simulation study, a wall segment is actuated according to a control scheme based on a POD-Galerkin model driven extended Kalman filter for state estimation and a model predictive controller to dampen TS waves by negative superposition based on this information. The setup of the simulation is chosen to resemble actuation with a driven compliant wall, such as a membrane actuator. Most importantly, a method is proposed to integrate such a localized wall actuation into a Galerkin model.     

MINIMAX THEOREM AND SADDLE POINT THEOREM WITHOUT LINEAR STRUCTURE

I.IntroductionFanKyinequalityisaveryusefultoolinnoolinearanalysiswhichasserts:LetXbeanonemptycompactconvexsetinatopologicallinearspaceandWbeareal-valuedfunctiondefinedonXxX.Assumethat(i)9(x,y)islowersemicontinuousinac;(n)9(x,y)isquasiconcaveiny.ThenthereisboaXsuchthatsHPg(xo'Y)$sZPp(x,x).SinceFanKyprovedtheinequalityin1972,variousg...,.li..tlon,havebeen;v..byseveralauthors(see[l-3]andreferencestherein).Thepreviousgeneralizationsallremainedtheconditions(i)-'9(x,y)beinglowersemicontinuous…     

On Approximate Representation of Periodic Motions at a Saddle Point

The results of a qualitative analysis of a bistable oscillator are applied to the approximate integration of a system with a closed trajectory about a saddle point.