Synthesis, structure, and 19F NMR spectra of 1,3,7,10,14,17,23,28,31,40-C60(CF3)10

A significant improvement in the selectivity of fullerene trifluoromethylation reactions was achieved. Reaction of trifluoroiodomethane with [60]fullerene at 460 degrees C and [70]fullerene at 470 degrees C in a flow reactor led to isolation of cold-zone-condensed mixtures of C60(CF3)n and C70(CF3)n compounds with narrow composition ranges: 6 < or = n < or = 12 for C(60)(CF3)n and 8 < or = n < or = 14 for C70(CF3)n. The predominant products in the C(60) reaction, an estimated 40+ mol % of the cold-zone condensate, were three isomers of C60(CF3)10. Two of these were purified by two-stage HPLC to 80+% isomeric purity. The third isomer was purified by three-stage HPLC to 95% isomeric purity. Thirteen milligrams of this orange-brown compound was isolated (5% overall yield based on C60, and its C1-symmetric structure was determined to be 1,3,7,10,14,17,23,28,31,40-C60(CF3)10 by X-ray crystallography. The CF3 groups are either meta or para to one another on a p-m-p-p-p-m-p-m-p ribbon of edge-sharing C6(CF3)2 hexagons (each pair of adjacent hexagons shares a common CF3 group). The selectivity of the C70 reaction was even higher. The predominant product was a single C70(CF3)10 isomer representing >40 mol % of the cold-zone condensate. Single-stage HPLC led to the isolation of 12 mg of this brown compound in 95% isomeric purity (27% overall yield based on converted C70. The new compounds were characterized by EI or S(8)-MALDI mass spectrometry and 2D-COSY 19F NMR spectroscopy. The NMR data demonstrate that through-space coupling via direct overlap of fluorine orbitals is the predominant contribution to J(FF) values in these and most other fullerene(CF3)n compounds.     

Preparation and characterization of insulin-loaded acrylic hydrogels containing absorption enhancers

The objectives of this study were to prepare insulin-loaded acrylic hydrogel formulations containing various absorption enhancers, to perform in vitro and in vivo characterization of these formulations, and to evaluate the factors which affecting insulin availability on rectal delivery of insulin using this hydrogel system. The acrylic block copolymer of methacrylic acid and methacrylate, Eudispert, was used to make the hydrogel formulations. As absorption enhancers, 2,6-di-O-methyl-beta-cyclodextrin (DM-beta-CyD), lauric acid (C12), or the sodium salt of C12 (C12Na), were incorporated into the hydrogels. In an in vitro release test, the release rate of insulin from the hydrogels decreased as the polymer concentration of the hydrogel increased. The addition of C12Na to the hydrogel further increased the insulin release rate, which was greater at higher concentrations of the enhancer. A portion of the C12Na was found to remain bound to the acrylic polymer in dissolution medium. Serum insulin levels were determined at various time points after the administration of insulin solution or insulin-loaded (50 units/kg body weight) Eudispert hydrogels containing 5% (w/w) of C12, C12Na, or DM-beta-CyD to in situ loops in various regions of the rat intestine. The most effective enhancement of insulin release was observed with formulations containing C12Na. The bioavailability of insulin from the hydrogels was lower than that from the insulin solutions. Hydrogel formulations containing 7% or 10% Eudispert remained in the rectum for 5 h after rectal administration. However, the 5% (w/w) C12Na solution stained with Evan's-blue had diffused out and the dye had reached the upper intestinal tract within 2 h. Finally, the rectal administration of insulin-loaded hydrogels, containing 4%, 7%, or 10% (w/w) Eudispert and 5% (w/w) of enhancer (C12, C12Na, or DM-beta-CyD) to normal rats was shown to decrease serum glucose concentrations. The greatest effect was found with insulin-loaded 7% (Eudispert) hydrogel containing C12Na which having cosiderable large insulin release rate and bioadhesive characteristics.     

The composition and concentration of hydrocarbons in the range of C2 to C18 in downtown Los Angeles,CA

Ambient air samples were collected in the downtown Los Angeles (California) area and analyzed for non-methane hydrocarbons in the range of C2 to C18. Two daily samples were collected, using stainless steel canisters and Tenax-TA solid adsorbent cartridges, over four days in August 1991. The samples were analyzed using high resolution gas chromatographic separation and Fourier transform infrared/mass spectrometric detection (GC/IRD/MSD) or flame ionization detection (FID) of individual hydrocarbons. The comparison of hydrocarbon concentrations found in the Tenax and canister samples and the assessment of the contribution of semivolatile hydrocarbons (C10–C18 range) to the sum of non-methane hydrocarbons (C2–C10 or C2–C12), as measured by the canister method, is presented. This contribution ranges from ~7% to 15% (for C10–C18 range) and ~3% to 8% (for C12–C18 range). The semivolatile hydrocarbons also contribute ~16% to the total ozone forming potential of non-methane hydrocarbons.     

Comparison of two Copper Reagents for Detection of Saturated and Unsaturated Neutral Lipids by Charring Densitometry

Abstract

The intensity of staining of each of four classes of neutral lipids (monoacylglycerol, diacylglycerol, triacylglycerol and fatty acid methyl ester) is shown to be dependent on the number or amount of carbon-carbon double bonds (C=C) when using 3% cupric acetate in 8% phosphoric acid. In contrast, staining with 10% cupric sulfate in 8% phosphoric acid is relatively Independent of the number or amount of C=C.     

Complexation behavior of alpha-, beta-, and gamma-cyclodextrin in modulating and constructing polymer networks

A systematic study of the host-guest complexation by alpha-, beta-, and gamma-cyclodextrin (CD) in either the free state or as substituents of poly(acrylic acid) (PAA) with the hydrophobic n-octadecyl groups, C18, substituted onto PAA (HMPAA) and its effect on polymer aggregation and network formation is reported. Free alpha-CD, beta-CD, and gamma-CD mask hydrophobic associations between the C18 substituent of HMPAA in aqueous solution and form host-guest complexes with a 1:1 or CD:C18 substituent stoichiometry at 0.5 wt % polymer concentration. For alpha-CD this host-guest stoichiometry changes to 2:1 or 2alpha-CD:C18 at > or =1 wt % polymer concentrations but not for beta-CD and gamma-CD. Shear-thickening occurs when gamma-CD complexes C18 HMPAA substituents. Upon addition of sodium dodecyl sulfate, SDS (SDS:CD = 1:1), the hydrophobic associations between C18 diminished by alpha-CD masking were fully restored, were only partly restored in the case of beta-CD, and not restored for gamma-CD. When alpha- and beta-CD substituted PAA (alpha-CDPAA and beta-CDPAA) were mixed with HMPAA polymer, networks formed. As for free beta-CD, the beta-CD substituents of beta-CDPAA also formed 1:1 or beta-CD:C18 stoichiometry host-guest complexes with the C18 substituents of HMPAA. The alpha-CD substituents of alpha-CDPAA also formed 1:1 or alpha-CD:C18 stoichiometry host-guest complexes with some indication of the formation of 2:1 or 2alpha-CD:C18 stoichiometry host-guest complexes at polymer concentrations > or =1 wt %. The polymer networks formed by beta-CDPAA with HMPAA are less viscous than those formed by alpha-CDPAA, for which shear-thickening occurs at polymer concentrations > or =2 wt %. It is evident that the difference in CD annular size and its match with the C18 of HMPAA control the diversity of the interactions of alpha-CD, beta-CD, gamma-CD, alpha-CDPAA, and beta-CDPAA with HMPAA.     

Influence of medium and temperature on the hydrolysis kinetics of propacetamol hydrochloride: determination using derivative spectrophotometry

Propacetamol hydrochloride (PRO) is a water-soluble prodrug of paracetamol (PA) which can be parenterally administered as analgesic for the treatment of postoperative pain, acute trauma, and gastric and/or intestinal disorders where oral administration is not possible. In these circumstances, PRO can be administered in physiologic or glucose solutions since it is rapidly and quantitatively hydrolyzed into PA by plasma estearases. We have studied the degradation kinetics of PRO in 5% glucose and 0.9% saline solutions at 4 degrees C and 25 degrees C (storage and room temperatures, respectively). The analytic technique used to determine PRO and PA quantitatively was first-derivative spectrophotometry. The degradation process of PRO can be best fitted to a second-order kinetics with independence of the medium used (saline or glucose solution). The hydrolysis kinetics of PRO conversion into PA depends on the temperature but not on the assay medium (saline or glucose solution). The degradation rate constants obtained for PRO were approximately 4.5 times higher at 25 degrees C than at 4 degrees C. The values of t(90%) for PRO were 3.17 h and 3.61 h at 25 degrees C, and 13.42 h and 12.36 h at 4 degrees C when the tests were performed in 5% glucose and 0.9% saline solutions, respectively.     

气相色谱-原子发射光谱联用技术测定柴油中硫化物

采用气相色谱－原子发射光谱（GC－AED）联用技术对柴油中硫化物进行了定性定量研究，考察了柴油加氢脱硫处理前后硫化物的变化及不同柴油原料硫化物的分布情况。结果表明，1＃柴油可定性出33类硫化物，经加氢脱硫处理后，1－1＃和1－2＃样品硫含量可由1497mg/L分别降到165.1mg/L和90.4mg/L，平均脱除率为89.0%和94.0%。其中噻吩或苯并噻吩的脱除率为100％；C1二苯并噻吩的肿除率为90.0%和96.2%;C2二苯并噻吩的脱除率为80.6%和91.7%；C3二苯并噻吩的脱除率为72.6%和84.4%；C4二苯并噻吩的脱除率为79.0%和90.3%;C5或C6二苯并噻吩的脱除率为58.4%和68.4%；未知硫化物脱除率95.7%和97.9%。噻吩类脱除率视取代基的大小、个数和取代位置的不同脱除率不同；不同原料 总硫和各种硫化物含量差别很大，应根据其硫化物的分布特点，有针对性地研制开发加氢脱硫的催化剂及选择合适的加工工艺。     

Comparison of nutshell granular activated carbons to commercial adsorbents for the purge-and-trap gas chromatographic analysis of volatile organic compounds

Granular activated carbons (GACs) made from agricultural by-products were investigated as adsorbents for short path thermal desorption gas chromatographic analysis of selected polar and nonpolar organic compounds. GACs made from macadamia nut, black walnut and hazelnut shells were compared to four commercially available adsorbents, namely, Tenax TA, Carboxen 569, Carbosieve SIII and coconut charcoal for their properties in purge-and-trap analysis. Adsorption values and breakthrough volumes were calculated for compounds from C3 and C6-C10. GACs derived from macadamia nut shells were found to adsorb and desorb between 80% (benzene) and 277% (ethylbenzene) more acetone (C3), benzene (C6), toluene (C7), ethyl- (C8), n-propyl- (C9), or sec.-butylbenzenes (C10) purged from water at the 100 ppb level than the commercial adsorbents tested.     

Enzymatic cyclization reactions of geraniol, farnesol and geranylgeraniol, and those of truncated squalene analogs having C20 and C25 by recombinant squalene cyclase

The substrate specificity of squalene-hopene cyclase was investigated using the C10-C25 analogs including naturally occurring substances, e.g. geraniol (C10), farnesol (C15) and geranylgeraniol (C20). No cyclization occurred for geraniol, but a significantly high conversion ratio (64%) was observed for farnesol, yielding the cyclic sesquiterpenes consisting of 6/6-fused bicyclic ring systems. Among them, an attractive compound having C30 was produced, in the structure of which acyclic the farnesol unit is linked to the bicyclic skeleton through ether linkage. Conversion of geranylgeraniol was low (ca. 12%). The squalene analogs having C20 and C25 also were cyclized in yields of ca. 33-36%, but the analogs having the methyl group at C7 and/or at C11 underwent no cyclization; the large steric bulk size of C7-Me and/or C11-Me, which is arranged in [small alpha]-disposition for all the pre-chair conformation, would have interacted repulsively with the cyclase recognition site near to the C7 and/or C11, resulting in no construction of the all-chair conformation inside the reaction cavity. A relatively low yield of geranylgeraniol indicated that a less bulky hydrogen atom must be located at C14 for the efficient polycyclization reaction. The squalene cyclase shows remarkably broad substrate specificity to accept the truncated analogs having carbon-chain lengths of C(15)-C25 in addition to C30.     

Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea

Conversions of statins, 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitors, from lactone forms to their corresponding hydroxy acid form in 0.1 N NaOH or 0.05 N KOH (prepared with 25, 50, 75, 90% acetonitrile or methanol in water or 100% water) were evaluated. Results showed that lactone form statins could be transformed almost completely only in alkaline solutions prepared with 25 or 50% acetonitrile. In all methanolic alkaline solutions, lactone form statins could also be converted entirely, nevertheless, they would be further transformed to the methyl ester of the hydroxy acid form and the transformation increased as methanol rises. When lactone and hydroxy acid forms of statins were in methanol, ethyl acetate, 70% acetonitrile in water (with 0.5% acetic acid or no) for 0-48 h at room temperature or in 100 degrees C water for 0-2 h, lactone form statins were converted to their corresponding hydroxy acids, which were raised as time extends and the highest conversions of them were about 35% in 100 degrees C water and 70% acetonitrile, slightly transformed for lactone form statins in 70% acetonitrile (with 0.5% acetic acid) after 8 h, and the other treatments for all statins showed no significant changes. Interferences would be reduced efficiently when statins were extracted from Pu-Erh tea with methanol, ethyl acetate or 100 degrees C water followed by purifying through a C18 solid-phase extraction cartridge. Lovastatin was the only statin found in Pu-Erh tea and the highest content of it was found under ethyl acetate extraction. In ethyl acetate and methanol extracts, lovastatin existed merely as lactone form. The lowest content of lovastatin was found in the 100 degrees C water extract of Pu-Erh tea, however, both of lactone and hydroxy acid forms were found to exist in the extract.     

Stable carbon isotope analysis of different tissues of beef animals in relation to their diet

As part of a larger experiment, 31 young bulls, divided into three groups, were given different diets containing either C(3) plants or a combination of C(3) and C(4) plant-based feeds in three feeding periods before slaughter. Variation in the proportion of C(4) plant material in the diets was made by including or not maize or maize-derived ingredients, whereas the other dietary constituents were from C(3) plants. Analysis of stable carbon isotope ratios (delta(13)C value) was performed on different tissues taken at slaughter: blood, plasma, liver, kidney fat, hair, muscle and ruminal contents. Blood and plasma samples were also taken at the beginning of each period. A highly significant difference was found in the delta(13)C values of blood and plasma samples taken from animals that had received a diet of only C(3) plants or with 59% C(4) material for 70 days. The delta(13)C values of all different samples taken at slaughter were highly significantly different between the three feeding groups that had received diets with 0, 13.5 or 35% C(4) material for on average 137, 139 and 83 days, respectively. For the three groups, samples of hair, muscle, plasma, whole blood and liver were significantly enriched in (13)C compared with the diet (except for liver in one group), whereas kidney fat was significantly depleted. The proportion of C(4) plant material could be accurately estimated from the delta(13)C values of different tissue samples. Stable carbon analysis of different tissues from beef animals can be used to trace back diets containing variable proportions of C(3) and C(4) plant material.     

Dry-distillation of experimental animal wastes containing radioisotopes

Mice were dry-distilled at 800 degrees C for 10 min, after [32P]orthophosphate or L-[4,5-3H]leucine was intraperitoneally administered. Phosphorus-32 was quantitatively recovered in the residual solid, whereas 95% of 3H was found int he distillate (condensed water). When 14C (L-[U-14C]malic acid or L-[U-14C]leucine) was administered to mice and they were dry-distilled, 14C-radioactivity was distributed into two fractions; residual solid and exhaust gas. In these cases, the recovery percentage of 14C in residual solid was not very high but increased as the treating temperature decreased. It reached about 40% of the administered 14C at 400 degrees C for 120 min. By the dry-distillation of animals, their weight was reduced to about 10% in every animal tested (mice, rats and rabbits). The volume was reduced to about 20% in cases of mice and rats, and about 30% in case of rabbits. It was concluded that the dry-distillation can be useful as a pre-treatment for disposal of animal wastes containing radioisotopes.     

D-葡萄糖酸衍生物C5和C6羟基保护基迁移现象研究

2-O-甲基-3,4-O-丙酮叉基-D-葡萄糖酸甲酯(6)的C6羟基用乙酰基保护、C5仲羟基用TBS保护得到化合物8,碳酸钾脱除C6-O-乙酰基时,C5-O-TBS迁移到C6羟基得到了化合物9(74%收率),没有得到目标产物12;将化合物6的C6羟基用TBS保护、C5羟基乙酰基保护的化合物10,四丁基氟化铵脱除C6-O...     

Molecular structure and conformations of para-methylbenzene sulfonamide and ortho-methylbenzene sulfonamide: gas electron diffraction and quantum chemical calculations study

The molecular structure and conformational properties of para-methylbenzene sulfonamide (4-MBSA) and ortho-methylbenzene sulfonamide (2-MBSA) have been studied by gas electron diffraction (GED) and quantum chemical methods (B3LYP/6-311+G** and MP2/6-31G**). Quantum chemical calculations predict the existence of two conformers for 4-MBSA with the S-N bond perpendicular to the benzene plane and the NH2 group either eclipsing or staggering the S-O bonds of the SO2 group. Both conformers possess CS symmetry. The eclipsed form is predicted to be favored by DeltaE = 0.63 kcal/mol (B3LYP) or 1.00 kcal/mol (MP2). According to the calculations, the S-N bond in 2-MBSA can possess planar direction opposite the methyl group (phi(C2C1SN) = 180 degrees ) or nonplanar direction (phi(C2C1SN) approximately 60 degrees ). In both cases, the NH2 group can adopt eclipsed or staggered orientation, resulting in a total of four stable conformers. The nonplanar eclipsed conformer (C1 symmetry) and the planar eclipsed form (CS symmetry) are predicted to be favored. According to the GED analysis, the saturated vapor over solid 4-MBSA at T = 151(3) degrees C consists as mixture of the eclipsed (78(19) %) and staggered (22(19) %) forms. The saturated vapor over solid 2-MBSA at T = 157(3) degrees C consists as a mixture of the nonplanar eclipsed (69(11) %) and planar eclipsed (31(11) %) forms.     

Phase-selective solubility of poly(N-alkylacrylamide)s

The extent of the phase-selective solubility of poly(N-alkylacrylamide)s was studied by UV-vis and fluorescence spectroscopy using poly(N-isopropylacrylamide) and poly(N-octadecylacrylamide) as representative polar and nonpolar poly(N-alkylacrylamide)s in a mixture of polar and nonpolar thermomorphic solvents. Phase-selective solubilities of greater than 10000:1 were seen with each labeled polymer in polar and nonpolar solvents such as heptane and DMF or heptane and 90% EtOH-H(2)O. Using a poly(N-acryloxysuccinimide) as a common precursor, a pool-split synthesis was devised to prepare a library of poly(N-alkylacrylamide)s whose members varied only in the size of their N-alkyl substituent. The solubilities of these library members were measured in both the polar and nonpolar phases of a thermomorphic heptane/90% EtOH-H(2)O mixture at 25 degrees C. Such solvent mixtures are miscible hot (70 degrees C) and biphasic cold (25 degrees C). The results show that poly(N-pentylacrylamide) is selectively soluble (>99.5%) in the polar EtOH-rich phase at rest. Poly(N-alkylacrylamide)s with larger N-alkyl groups are predominantly (C(6), 85%; C(7), 95%) or exclusively (>C(8), >99.5%) in the heptane-rich phase at rest.     

Synthesis and optical properties of asymmetric polyamides derived from cyclopropyl diacids and diamines

The polyamides were prepared from the dicarbonyl chloride of (+) (S)- or (?)(R)-trans-1,2-cyclopropanedicarboxylic acid (C3A) with either the dihydrochloride salt of (+)(S)- or (?)(R)-trans-1,2-diaminocyclopropane (C3B) or the dihydrobromide salt of (+)(S)- or (?)(R)-trans-1,2-bis(methylamino)cyclopropane (C3MB) by interfacial polycondensation. Several diamide model compounds composed of these monomers were also synthesized. The polyamides [poly(C3A-C3B)] derived from C3A and C3B have the capability of hydrogen bonding, while the polyamides [poly-(C3A-C3MB)] derived from C3A and C3MB do not. Poly(C3A-C3B) were insoluble in common organic solvents except strong acids. Poly(C3A-C3MB) were soluble in common organic solvents. Poly(C3A-C3B) had melting points higher than 300°C. Poly(C3A-C3MB) melted at 180–235°C. The ORD and CD study has shown that poly(+)C3A(+)C3B in methane sulfonic acid (MSA), 2,2,2-trifluoroethanol (TFE) (5 v % MSA), and tetramethylenesulfone (TMS) (5 v % MSA) exhibits a very strong Cotton effect or CD peak at 212–218 mμ, attributable to a component of the split π–π^* transition of the amide chromophores. Poly(+)C3A(+)C3MB in MSA and TFE (5 v % MSA) shows a strong Cotton effect or CD peak at 217–223 mμ and an intermediate Cotton effect or CD trough at 202–204 mμ as well as an intermediate Cotton effect or CD trough at 220–222 mμ and an intermediate Cotton effect or CD peak at 202–204 mμ in TFE and TMS. These peaks and troughs may be assigned to splitting of the π–π^* transition. The CD spectra of poly(+)C3A(+)C3MB in nonacidic media are quite different from those in acidic media: they are almost mirror images. The CD spectra in this transition induced by MSA suggests that a transition from a compact helix to another more extended helix with opposite handedness occurs similar to poly-L-proline I ? II. This transition may be explained by electrostatic repulsion between protonated amide groups. Viscosity data have shown that the conformation is changed to a highly extended from in acidic media. The polyamides and diamides derived from enantiomers exhibit mirror image spectra. Poly(+)C3A(+)C3B and poly(+)C3A(+)C3MB in every solvent studied exhibit a marked enhancement of the rotatory strength of ORD and CD with respect to the corresponding diamide models.     

Determination of the water content in muscovites containing large amounts of fluorine by karl fischer titration after fusion with silicon dioxide

Complete release of water (or of hydrogen in the lattice which is finally released as water) from muscovite containing a large amount of fluorine, requires heating above 1500°C or addition of an appropriate flux. Experimental data from differential thermal analysis, x-ray diffraction patterns and dehydration curves showed that silicon dioxide is a useful flux. Samples are mixed with a 3 : 1 (weight) ratio of silicon dioxide in a platinum crucible and heated inductively in a nitrogen stream at 1200°C. The water released is absorbed in anhydrous (1 + 1) methanol—1, 2-ethanediol and titrated by the Karl Fischer method. For a representative muscovite sample, the water contents were 4.26 ± 0.03% at 1300—1400°C and 4.35 ± 0.08% above 1500°C in the absence of silicon dioxide. When silicon dioxide was added as described, the mean result was 4.33 ± 0.01% at 1200°C (95% confidence level) with a standard deviation of 0.015 and a coefficient of variation of 0.35%.     

Thermostability of Selected Enzymes in Organic Wastes and in their Humic Extract

The objective of this study was to evaluate the thermostability up to 70 degrees C for 1 h of selected enzymes present in fresh and composted sewage sludge (SS and SSC) or municipal solid wastes (MSW and MSWC) and their humic extract. After a thermal treatment at 70 degrees C, no beta-glucosidase activity in any humic extract was detected, whereas in SS, SSC, MSW, and MSWC, it was respectively, 35%, 68%, 17%, and 12% compared to thermally untreated samples. By contrast, o-diphenol oxidase activity was even stimulated by thermal treatment in SS samples, but in the humic extracts, this activity decreased by 75-81%. Urease activity in all humic extracts decreased by 70% or more just at 40 degrees C, whereas for organic wastes, this decrease was observed after treatment at 70 degrees C. Alkaline phosphatase (AP) activity was affected by thermal treatment only in MSW and MSWC. In humic extracts, AP activity decreased gradually to zero except for the MSW extract, where 45% activity was retained after treatment at 70 degrees C. In general, thermostability of enzymes in humic extracts was lower than the materials they were extracted from.     

Comparison of the signaling and stability of electrochemical DNA sensors fabricated from 6- or 11-carbon self-assembled monolayers

We have characterized the solution-phase and dry storage stability of electrochemical E-DNA sensors fabricated using mixed self-assembled monolayers (SAMs) composed of 6- or 11-carbon (C6 and C11, respectively) alpha,omega-thiol alcohols and the analogous C6- or C11-thiol-terminated stem-loop DNA probe. We find that the solution-phase and dry storage stability of C6-based E-DNA sensors are limited and poorly reproducible. The use of stabilizing agents bovine serum albumin plus either glucose or trehalose significantly improves the dry storage shelf life of such sensors: when using these preservatives, we observe only 7-9% sensor degradation after 1 month of storage in air at room temperature. In comparison, the stability of C11-based E-DNA sensors is significantly greater than that of the C6-based sensors; we observe only minor (5-8%) loss of signal upon storing these sensors for a week under ambient solution conditions or for more than a month in air in the presence of preservatives. Moreover, whereas the electron-transfer rate through C11 SAMs is slower than that observed for C6 SAMs, it is rapid enough to support good sensor performance. It thus appears that C11 SAMs provide a reasonable compromise between electron-transfer efficiency and sensor stability and are well suited for use in electronic DNA-sensing applications.     

The effects of preservation methods, dyes and acidification on the isotopic values (δ15N and δ13C) of two zooplankton species from the KwaZulu-Natal Bight, South Africa

Stable isotope measurements are an important tool for ecosystem trophic linkage studies. Ideally, fresh samples should be used for isotopic analysis, but in many cases organisms must be preserved and analysed later. In some cases dyes must be used to help distinguish organisms from detritus. Since preservatives and dyes are carbon-based, their addition could influence isotopic readings. This study aims to improve understanding of the effects of sample storage method, dye addition and acidification on the δ(15)N and δ(13)C values of zooplankton (Euphasia frigida and Undinula vulgaris). Zooplankton was collected and preserved by freezing, or by the addition of 5% formalin, 70% ethanol, or 5% formalin with added Phloxine B or Rose Bengal, and stored for 1 month before processing. Samples in 5% formalin and 70% ethanol were also kept and processed after 3 and 9 months to study changes over time. Formalin caused the largest enrichment for δ(13)C and a slight enrichment for δ(15)N, while ethanol produced a slight depletion for δ(13)C, and different effects on δ(15)N depending on the species. In formalin, dyes depleted the δ(13)C values, but had variable effects on δ(15)N, relative to formalin alone. Acidification had no significant effect on δ(15)N or δ(13)C for either species. Long-term storage showed that the effects of the preservatives were species-dependent. Although the effects on δ(15)N varied, a relative enrichment in (13)C of samples occurred with time. This can have important consequences for the understanding of the organic flow within a food web and for trophic studies. .