Carbon‐13 Nuclear Magnetic Resonance Spectroscopic Analyses of 3‐Aryl‐3‐hydroxyl‐2,2,4,4‐tetramethylcyclobutanones and Related Compounds

A series of 2‐aryl‐2‐hydroxy‐1,1,3,3‐tetramethyl‐5,8‐dioxaspiro[3.4]octanes ( 1 ), 3‐aryl‐3‐hydyoxyl‐2,2,4,4‐tetyramethylcyclobutanones ( 2 ), and l‐aryl‐2,2,4‐trimethyl‐1,3‐pentadiones ( 3 ) were studied using ¹³C NMR analyses. The chemical shifts of C‐c are dependent on the substituent groups on the phenyl ring for compounds 1 (ρ =‐0.966, R² = 0.987) and 2 (ρ = ?1.378, R² = 0.998). The chemical shifts of C‐a follow a similar trend (ρ =?0.926, R² = 0.989). In the case of compounds 3 , C‐c yielded the opposite trend with very poor correlation coefficiency (ρ = 1.22, R² = 0.179). This result reveals the field effect of a polar bond and resonance‐induced changes in pi electron‐density at C‐1 on the cyclobutanering series.     

Isotopic effect on tautomeric behavior of 5‐(2,6‐disubstituted‐aryloxy)‐tetrazoles

Isotopic effect on tautomeric behaviors of the synthesized 5‐phenoxy‐ (1a), 5‐(2,6‐dimethylphenoxy)‐ (1b), 5‐(2,6‐diisopropylphenoxy)‐ (1c), 5‐(2,6‐dimethoxyphenoxy)‐ (1d) and 5‐(4‐methylphenoxy)‐tetrazole (1e) were investigated in DMSO‐d₆ by adding one drop of D₂O. Among 1a–e, 1a, 1d and 1e show small rotational barrier around C5? O1 and O1? C6 while in 1b and 1c there are distinguishable rotational barrier about that bonds. The ¹H NMR spectra of 1b and 1c show slightly different chemical shifts for two methyl and isopropyl groups on those phenyl ring, respectively, while the chemical shifts difference (Δδ) between two methyl and two isopropyl groups were enhanced by adding D₂O. The ¹³C NMR spectra of 1b show two overlapped singlets for methyl groups after adding D₂O. Representatively, the calculations of compound 1c were performed with GAUSSIAN‐03and the rotational barrier about C5? O1 and between isopropyl group and phenyl ring in 1c was calculated with B3LYP/6‐31G(d) basis set. Copyright © 2011 John Wiley & Sons, Ltd.     

Lysosome‐targeted potent half‐sandwich iridium(III) α‐diimine antitumor complexes

Fifteen organometallic Ir(III) half‐sandwich complexes ( 1A – 5C ) having the general formula [(η⁵‐Cp^x)Ir(N^N)Cl]PF₆ (Cp^x = Cp*, tetramethyl(phenyl)cyclopentadienyl (Cp^xph) or tetramethyl(biphenyl)cyclopentadienyl (Cp^xbiph); N^N = diamine) have been synthesized and characterized. The molecular structure of 1A was determined using single‐crystal X‐ray diffraction analysis. The hydrolysis of 1A – 5C was monitored using UV–visible spectra. Complexes 3A – 3C showed catalytic activity for the oxidation of NADH to NAD⁺, where 3C showed the highest turnover number of 29.9 within 450 min. Cytotoxicity examination by MTT assay was carried out against two human cancer cell lines (HeLa and A549) after 24 or 48 h drug treatment. The complexes showed high potency, where the most potent complex ( 3C ; IC₅₀ = 3.4 μM) was six times more active than cisplatin against A549 cells after 24 h drug exposure. Cytotoxic potency towards A549 cells increased with phenyl substitution on Cp ring: Cp^xbiph > Cp^xph > Cp*. In addition, the biological studies showed that 3C caused cell apoptosis and cell cycle arrest at G₁ phase in A549 cancer cells. Moreover, 3C increased the level of reactive oxygen species markedly after 24 h, which may provide an important basis for killing cancer cells. Confocal laser scanning microscopy was used to track 3C in A549 cells. The cellular localization experiment showed that 3C targeted lysosomes and caused lysosomal damage.     

Synthesis,structural characterization and cytotoxic activity of diorganotin(IV) complexes of N‐(5‐halosalicylidene)‐α‐amino acid

Fourteen new diorganotin(IV) complexes of N‐(5‐halosalicylidene)‐α‐amino acid, R′₂Sn(5‐X‐2‐OC₆H₃CH?NCHRCOO) (where X = Cl, Br; R = H, Me, i‐Pr; R′ = n‐Bu, Ph, Cy), were synthesized by the reactions of diorganotin halides with potassium salt of N‐(5‐halosalicylidene)‐α‐amino acid and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. The crystal structures of Bu₂Sn(5‐Cl‐2‐OC₆H₃CH?NCH(i‐Pr)COO) and Ph₂Sn(5‐Br‐2‐OC₆H₃CH?NCH(i‐Pr)COO) were determined by X‐ray single‐crystal diffraction and showed that the tin atoms are in a distorted trigonal bipyramidal geometry and form five‐ and six‐membered chelate rings with the tridentate ligand. Bioassay results of a few compounds indicated that the compounds have strong cytotoxic activity against three human tumour cell lines, i.e. HeLa, CoLo205 and MCF‐7, and the activity decreased in the order Cy>n‐Bu>Ph for the R′ group bound to tin. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis,Spectroscopic, and X‐Ray Diffraction Studies of cis‐Dichlorobis(4‐propanoyl‐2,4‐dihydro‐5‐methyl‐2‐phenyl3 H‐pyrazol‐3‐onato) Tin(IV)

Reaction between an aqueous ethanol solution of tin(II) chloride and that of 4‐propanoyl‐2,4‐dihydro‐5‐methyl‐2‐phenyl‐3 H‐pyrazol‐3‐one in the presence of O₂ gave the compound cis‐dichlorobis(4‐propanoyl‐2,4‐dihydro‐5‐methyl‐2‐phenyl‐3 H‐pyrazol‐3‐onato) tin(IV) [(C₂₆H₂₆N₄O₄)SnCl₂]. The compound has a six‐coordinated Sn^IV centre in a distorted octahedral configuration with two chloro ligands in cis position. The tin atom is also at a pseudo two‐fold axis of inversion for both the ligand anions and the two cis‐chloro ligands. The orange compound crystallizes in the triclinic space group P 1 with unit cell dimensions, a = 8.741(3) Å, b = 12.325(7) Å, c = 13.922(7) Å; α = 71.59(4), β = 79.39(3), γ = 75.18(4); Z = 2 and D_x = 1.575 g cm^–3. The important bond distances in the chelate ring are Sn–O [2.041 to 2.103 Å], Sn–Cl [2.347 to 2.351 Å], C–O [1.261 to 1.289 Å] and C–C [1.401 Å] the bond angles are O–Sn–O 82.6 to 87.7° and Cl–Sn–Cl 97.59°. The UV, IR, ¹H NMR and ¹¹⁹Sn Mössbauer spectral data of the compound are reported and discussed.     

15N NMR spectroscopy of 3‐substituted 5‐trichloromethyl‐1,2‐dimethyl‐1H‐pyrazolium chlorides

¹⁵N NMR data of a series of 3‐alkyl[aryl] substituted 5‐trichloromethyl‐1,2‐dimethyl‐1H‐pyrazolium chlorides (where the 3‐substituents are H, Me, Et, n‐Pr, n‐Bu, n‐Pe, n‐Hex, (CH₂)₅CO₂Et, CH₂Br, Ph and 4‐Br‐C₆H₄), are reported. The ¹⁵N substituent chemical shifts (SCS) parameters are determined and these data are compared with the ¹³C SCS values and data obtained by MO calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Synthesis,Characterization of a Novel 1,2,4‐Thiotriazine Derivative (CAMTTO), and Copper(I) and Silver(I) Complexes thereof (CAMTTO = {(4‐[(4‐Chlorobenzylidene)‐amino]‐6‐methyl‐3‐thioxo‐[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one)}

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazin‐thione‐5‐one (H₂AMTTO, 1 ) with 4‐chlorobenzaldhyde led to the corresponding iminic compound {(4‐[(4‐chloro‐benzylidene)‐amino]‐6‐methyl‐3‐thioxo[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one), CAMTTO ( 2 ). Treatment of 2 with copper(I) chloride in chloroform gave the dimeric complex [{(CAMTTO)₂CuCl}₂]·2CHCl₃ ( 3 ). Treatment of 2 with copper(I) chloride and silver(I) nitrate in the presence of the co‐ligand triphenylphophane gave the complexes [(CAMTTO)CuCl(PPh₃)₂] ( 4 ) and [(CAMTTO)Ag(PPh₃)₂]NO₃·2CHCl₃ ( 5 ). All compounds have been characterized by elemental analyses, ¹H NMR spectroscopy, IR spectroscopy, and partly by mass spectrometry and X‐ray diffraction studies. In addition 4 and 5 have been characterized by ³¹P{¹H} NMR spectroscopy. Crystal data for 2 at ?80 °C: monoclinic, space group P2₁/c, a = 1370.3(1), b = 767.8(1), c = 1268.7(1) pm, β = 107.12(1)°, Z = 4, R₁ = 0.0379; for 3 at ?80 °C: monoclinic, space group P2₁/c, a = 1442.6(2), b = 878.8(1), c = 2558.7(3) pm, β = 95.31(1)°, Z = 2, R₁ = 0.0746; for 4 at ?80 °C: triclinic, space group , a = 1287.9(1), b = 1291.7(1), c = 1359.5(1) pm, α = 90.44(1)°, β = 94.81(1)°, γ = 107.54(1)°, Z = 2, R₁ = 0.0359 and for 5 at ?80 °C: triclinic, space group , a = 1060.5(1), b = 1578.2(2), c = 1689.6(2) pm, α = 87.70(1)°, β = 86.66(1)°, γ = 76.84(1)°, Z = 2, R₁ = 0.0487.     

Imino‐Bridged Bisphosphaalkenes (2,4‐Diphospha‐3‐azapentadienes)

Deprotonation of aminophosphaalkenes (RMe₂Si)₂C?PN(H)(R′) (R=Me, iPr; R′=tBu, 1‐adamantyl (1‐Ada), 2,4,6‐tBu₃C₆H₂ (Mes*)) followed by reactions of the corresponding Li salts Li[(RMe₂Si)₂C?P(M)(R′)] with one equivalent of the corresponding P‐chlorophosphaalkenes (RMe₂Si)₂C?PCl provides bisphosphaalkenes (2,4‐diphospha‐3‐azapentadienes) [(RMe₂Si)₂C?P]₂NR′. The thermally unstable tert‐butyliminobisphosphaalkene [(Me₃Si)₂C?P]₂NtBu ( 4 a ) undergoes isomerisation reactions by Me₃Si‐group migration that lead to mixtures of four‐membered heterocyles, but in the presence of an excess amount of (Me₃Si)₂C?PCl, 4 a furnishes an azatriphosphabicyclohexene C₃(SiMe₃)₅P₃NtBu ( 5 ) that gave red single crystals. Compound 5 contains a diphosphirane ring condensed with an azatriphospholene system that exhibits an endocylic P?C double bond and an exocyclic ylidic P⁽⁺⁾? C^(?)(SiMe₃)₂ unit. Using the bulkier iPrMe₂Si substituents at three‐coordinated carbon leads to slightly enhanced thermal stability of 2,4‐diphospha‐3‐azapentadienes [(iPrMe₂Si)₂C?P]₂NR′ (R′=tBu: 4 b ; R′=1‐Ada: 8 ). According to a low‐temperature crystal‐structure determination, 8 adopts a non‐planar structure with two distinctly differently oriented P?C sites, but ³¹P NMR spectra in solution exhibit singlet signals. ³¹P NMR spectra also reveal that bulky Mes* groups (Mes*=2,4,6‐tBu₃C₆H₂) at the central imino function lead to mixtures of symmetric and unsymmetric rotamers, thus implying hindered rotation around the P? N bonds in persistent compounds [(RMe₂Si)₂C?P]₂NMes* ( 11 a , 11 b ). DFT calculations for the parent molecule [(H₃Si)₂C?P]₂NCH₃ suggest that the non‐planar distortion of compound 8 will have steric grounds.     

Synthesis,Characterization and Crystal Structure of 4‐Amino‐1,2,4‐Δ2‐triazoline‐5‐thione and its Silver(I) Complex

The reaction of 4‐amino‐1,2,4‐Δ²‐triazoline‐5‐thione (ATT, 1 ) with AgNO₃ in methanol led to the complex [Ag(ATT)₂]NO₃ ( 2 ). 2 was characterized by elemental analyses, ¹H NMR, IR, and Raman spectroscopy as well as single‐crystal X‐ray diffraction. The molecular structure of 1 was also determined by single crystal X‐ray analysis. Crystal data for 1 at ?80 C: space group C2/c with a = 2107.4(2), b = 1425.1(1), c = 688.4(1) pm, β = 104.55(1)°, Z = 16, R₁ = 0.0514, crystal data for 2 at ?80 °C: space group P2₁/c with a = 675.7(1), b = 1321.1(1), c = 1311.2(1) pm, β = 90.03(1)°, Z = 4, R₁ = 0.0437.     

Synthesis of 9,9‐bis(4‐aminophenyl)fluorene‐based benzoxazine and properties of its high‐performance thermoset

A benzoxazine ( P‐bapf ) based on 9,9‐bis(4‐aminophenyl)fluorene (BAPF), phenol, and formaldehyde was successfully prepared using two‐pot and one‐pot procedures. In the two‐pot approach, BAPF initially reacted with 2‐hydroxybenzaldehyde, leading to 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene. The imine linkages of 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene were then reduced by sodium borohydride, forming 9,9‐bis(4‐(2‐hydroxybenzylamino)phenyl)fluorene. Finally, paraformaldehyde was added to induce ring closure condensation, forming benzoxazine ( P‐bapf ). In the one‐pot approach, P‐bapf was obtained directly by reacting BAPF, phenol, and paraformaldehyde in various solvents. Among the solvents, we found that using toluene/ethanol (2/1, v/v) as a solvent leads to the best purity and yield. No gelation was observed in the preparation. The structure of the resulting benzoxazine was confirmed by ¹H, ¹³C, ¹H? ¹H and ¹H? ¹³C NMR spectra. P‐bapf exhibits a photoluminescent emission at 395 nm under an excitation of 275 nm. After curing, the resulting P‐bapf thermoset exhibits T_g as high as 236 °C, and the T_g can be further increased to 260 °C by copolymerization with an equal equivalent of cresol novolac epoxy. The 5% degradation temperature of the P‐bapf thermoset reaches as high as 413 °C (N₂) and 431 °C (air). The refractive index at 589 nm is as high as 1.70, demonstrating a high refractive index characteristic of fluorene linkage. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

NMR Analysis of Substituent Effect of Arymethylene‐malononitriles and Malonates

A series of arylmethylene‐malononitriles and malonates were prepared from the condensation of arylaldehydes and malononitriles and malonates, respectively. The function of substituents on the carbon‐13 chemical shifts of the Cα and Cβ was studied. The correlation between Hammett's constants and the substituent chemical shifts demonstrates a negative slope for Cα and positive for C_β (1, C_α:ρ = ‐3.877, r² = 0.979; C_β:ρ = 6.899, r² = 0.984; 2, C_α:ρ = ‐2.817, r² = 0.926; C_β:ρ = 5.355, r² = 0.950). The large slopes for C_β for both series compounds resemble our previous studies on the arylcyclopropanes. The relaxation time of both proton and carbon are slightly affected by the size of substituents. In the viscosity study, an inverse‐law relationship between relaxation time and viscosity was observed.     

Germacyclobutenes: Generation by 1,1‐Carbalumination or 1,1‐Carbagallation and Their Photophysical Properties

Aluminium‐ and gallium‐functionalised alkenylalkynylgermanes, R¹₂Ge(C?C?R²)[C{E(CMe₃)₂}?C(H)?R²] (E=Al, Ga), exhibit a close contact between the coordinatively unsaturated Al or Ga atoms and the α‐C atoms of the intact ethynyl groups. These interactions activate the Ge?C(alkynyl) bonds and favour the thermally induced insertion of these C atoms into the E?C(vinyl) bonds by means of 1,1‐carbalumination or 1,1‐carbagallation reactions. For the first time the latter method was shown to be a powerful alternative to known metallation processes. Germacyclobutenes with an unsaturated GeC₃ heterocycle and endo‐ and exocyclic C?C bonds resulted from concomitant Ge?C bond formation to the β‐C atoms of the alkynyl groups. These heterocyclic compounds show an interesting photoluminescence behaviour with Stokes shifts of >110 nm. The fascinating properties are based on extended π‐delocalisation including σ*‐orbitals localised at Ge and Al. High‐level quantum chemical DFT and TD‐DFT calculations for an Al compound were applied to elucidate their absorption and emission properties. They revealed a biradical excited state with the transfer of a π‐electron into the empty p‐orbital at Al and a pyramidalisation of the metal atom.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.     

1‐Silacyclopent‐2‐enes and 1‐silacyclohex‐2‐enes bearing functionally substituted silyl groups in 2‐positions. Novel electron‐deficient Si?H?B bridges

The reactions of alkyn‐1‐yl(vinyl)silanes R₂Si[C?C‐Si(H)Me₂]CH?CH₂ [R = Me (1a), Ph (1b)], Me₂Si[C?C‐Si(Br)Me₂]CH?CH₂ (2a), and of alkyn‐1‐yl(allyl)silanes R₂Si[C?C‐Si(H)Me₂]CH₂CH?CH₂ (R = Me (3a), R = Ph (3b)] with 9‐borabicyclo[3.3.1]nonane in a 1:1 ratio afford in high yield the 1‐silacyclopent‐2‐ene derivatives 4a, b and 5a, and the 1‐silacyclohex‐2‐ene derivatives 6a, b, respectively, all of which bear a functionally substituted silyl group in 2‐position and the boryl group in 3‐position. This is the result of selective intermolecular 1,2‐hydroboration of the vinyl or allyl group, followed by intramolecular 1,1‐organoboration of the alkynyl group. In the cases of 4a, b, potential electron‐deficient Si? H? B bridges are absent or extremely weak, whereas in 6a,b the existence of Si? H? B bridges is evident from the NMR spectroscopic data (¹H, ¹¹B, ¹³C and ²⁹Si NMR). The molecular structure of 4b was determined by X‐ray analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

(E)‐N‐Benzyl­idene‐3‐chloro‐4‐fluoro­aniline

The title mol­ecule, C₁₃H₉ClFN, is substantially planar. The phenyl and 3‐chloro‐4‐fluoro­phenyl rings are on opposite sides of the C=N bond. There is an intermolecular C—H?F short contact with a C?F distance of 3.348 (2) Å and a C—H?F angle of 137.4 (1)°. The mol­ecules are held in layers parallel to the bc plane.     

Kinetic studies of the self‐reaction and reaction with HO2 of a tertiary β‐brominated peroxy radical between 298 and 393 K

The kinetics of reactions of the tertiary β‐brominated peroxy radical BrC(CH₃)₂C(CH₃)₂O₂ (2‐bromo‐1,1,2‐trimethylpropylperoxy) have been studied using the laser flash photolysis technique, photolysing HBr at 248 nm in the presence of O₂ and 2,3‐dimethylbut‐2‐ene. At room temperature, a rate constant of (2.0 ± 0.8) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹ was determined for the BrC(CH₃)₂C(CH₃)₂O₂ self‐reaction. The reaction of BrC(CH₃)₂C(CH₃)₂O₂ with HO₂ was investigated in the temperature range 306–393 K, yielding the following Arrhenius expression: k(BrC(CH₃)₂C(CH₃)₂O₂ + HO₂) = (2.04 ± 0.25) × 10⁻¹² exp[(501 ± 36)K/T] cm³ molecule⁻¹ s⁻¹, giving by extrapolation (1.10 ± 0.13) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ at 298 K. These results confirm the enhancement of the peroxy radical self‐reaction reactivity upon β‐substitution, which is similar for Br and OH substituents. In contrast, no significant effect of substituent has been observed on the rate constant for the reactions of peroxy radicals with HO₂. The global uncertainty factors on rate constants are equal to nearly 2 for the self‐reaction and to 1.35 for the reaction with HO₂. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 33: 41–48, 2001     

Effects of diamines and their fluorinated groups on the color lightness and preparation of organosoluble aromatic polyimides from 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐hexafluoropropane

To investigate the position and amount of the CF₃ group affecting the coloration of polyimides (PIs), we prepared 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]hexafluoropropane ( 2 ) with four CF₃ groups with 2‐chloro‐5‐nitrobenzotrifluoride and 2,2‐bis(4‐hydroxyphenol)hexafluoropropane. A series of soluble and light‐colored fluorinated PIs ( 5 ) were synthesized from 2 and various aromatic dianhydrides ( 3a – 3f ). 5a – 5f had inherent viscosities ranging from 0.80 to 1.19 dL/g and were soluble in amide polar solvents and even in less polar solvents. The glass‐transition temperatures of 5 were 221–265 °C, and the 10% weight‐loss temperatures were above 493 °C. Their films had cutoff wavelengths between 343 and 390 nm, b* values (a yellowness index) ranging from 5 to 41, dielectric constants of 2.68–3.01 (1 MHz), and moisture absorptions of 0.03–0.29 wt %. In a comparison of the PI series 6 – 8 based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane, and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane, we found that the CF₃ group close to the imide group was more effective in lowering the color; this means that CF₃ of 5 , 7 , and 8f was more effective than that of 6c . The color intensity of the four PI series was lowered in the following order: 5 > 7 > 6 > 8 . The PI 5f , synthesized from diamine 2 and 4,4′‐hexafluoroisopropylidenediphthalic anhydride, had six CF₃ groups in a repeated segment, so it exhibited the lightest color among the four series. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 922–938, 2003