Concerning the cation distribution in MnFe2O4 synthesized through the thermal decomposition of oxalates

A single phase manganese ferrite powder have been synthesized through the thermal decomposition reaction of MnC₂O₄·2H₂O-FeC₂O₄·2H₂O (1:2 mole ratio) mixture in air. DTA-TG, XRD, Mössbauer spectroscopy, FT-IR and SEM techniques were used to investigate the effect of calcination temperature on the mixture. Firing of the mixture in the range 300-500 °C produce ultra-fine particles of α-Fe₂O₃ having paramagnetic properties. XRD, Mössbauer spectroscopy as well as SEM experiments showed the progressive increase in the particle size of α-Fe₂O₃ up to 500 °C. DTA study reveals an exothermic phase transition at 550 °C attributed to the formation of a Fe₂O₃-Mn₂O₃ solid solution which persists to appear up to 1000 °C. At 1100 °C, the single phase MnFe₂O₄ with a cubic structure predominated. The Mössbauer effect spectrum of the produced ferrite exhibits normal Zeeman split sextets due to Fe³⁺ions at tetrahedral (A) and octahedral (B) sites. The obtained cation distribution from Mössbauer spectroscopy is (Fe_0.92Mn_0.08)[Fe_1.08Mn_0.92]O₄.     

Cation distribution dependence of magnetic properties of sol-gel prepared MnFe2O4 spinel ferrite nanoparticles

MnFe₂O₄ nanoparticles have been synthesized with a sol-gel method. Both differential thermal and thermo-gravimetric analyses indicate that MnFe₂O₄ nanoparticles form at 400 °C. Samples treated at 450 and 500 °C exhibit superparamagnetism at room temperature as implied from vibrating sample magnetometry. Mössbauer results indicate that as Mn²⁺ ions enter into the octahedral sites, Fe³⁺ ions transfer from octahedral to tetrahedral sites. When the calcination temperature increases from 450 to 700 °C, the occupation ratio of Fe³⁺ ions at the octahedral sites decreases from 43% to 39%. Susceptibility measurements versus magnetic field are reported for various temperatures (from 450 to 700 °C) and interpreted within the Stoner-Wohlfarth model.     

Non-isothermal kinetics and characterization studies for the decomposition course of CuC2O4-CdC2O4 mixture in air

DTA-TG experiment of CuC₂O₄-CdC₂O₄·3H₂O (1:1 mol ratios) mixture in air shows that the mixture was completely decomposed to CuO-CdO mixture through three well-defined steps. Intermediate decomposition products as well as the final products were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques.XRD experiments show the absence of any formed solid solution even by raising the calcination temperature from 400 to 800 °C. The increase in the intensity of the diffraction lines by raising the temperature can be attributed to the grain growth of the decomposition products as revealed by SEM and nitrogen adsorption isotherm experiments. Kinetic analysis of the oxalate decomposition steps according to the composite integral method showed that the decomposition is best described by the Avrami-Erofeev equation (A2) characteristic of the solid-state nucleation growth mechanism. The activation parameters were then calculated and discussed.     

Structural and Magnetic Properties of NiFe2−2xSnxCuxO4

The substituted nickel ferrite (NiFe_2−2xSn_xCu_xO₄, x=0, 0.1, 0.2, 0.3) was prepared by the conventional ceramic method. The effect of substitution of Fe³⁺ ions by Sn⁴⁺ and Cu²⁺ cations on the structural and magnetic properties of the ferrite was studied by means of ⁵⁷Fe Mössbauer spectroscopy, alternating gradient force magnetometry (AGFM) and Faraday balance. Whereas undoped NiFe₂O₄ adopts a fully inverse spinel structure of the type (Fe)[NiFe]O₄, Sn⁴⁺ and Cu²⁺ cations tend to occupy octahedral positions in the structure of the substituted ferrite. Based on the results of Mössbauer spectroscopic measurements, the crystal-chemical formula of the substituted ferrite may be written as (Fe)[NiFe_1−2xSn_xCu_x]O₄, where parentheses and square brackets enclose cations in tetrahedral (A) and octahedral [B] coordination, respectively. The Néel temperature and the saturation magnetization values of the NiFe_2−2xSn_xCu_xO₄ samples were found to decrease with increasing degree of substitution (x). The variation of the saturation magnetization with x measured using the AGFM method and that calculated on the basis of the Mössbauer spectroscopic measurements are in qualitative agreement.     

Mössbauer hyperfine spectra of dilute Fe3+ in synthetic MgAl2O4 spinel

Mössbauer effect spectra of ⁵⁷Fe diffused into powdered synthetic spinel, MgAl₂O₄, exhibit paramagnetic hyperfme structure. The iron was determined to be equally distributed between the tetrahedral and octahedral sites, with the tetrahedrally coordinated iron having a longer spin-lattice relaxation time. Analysis of the spectra taken in small applied fields between 30 and 1000 Oersted at 4.2 and 1.5 K yielded the electronic zero field splitting parameters and showed both sites to have significant departures from axial symmetry.     

Surface magnetic disorder in nanostructured Ni0.5Zn0.5Fe2O4 particles

Nanostructured ferroxide particles with initial formula Ni_0.5Zn_0.5Fe₂O₄ are investigated. The aim was to explore the monodomain and the superparamagnetic states of the ferrospinel and the impact of the surface magnetic disorder on the magnetization processes. Mössbauer spectroscopy (MöS) demonstrated that the ion distribution follows the general formula (Zn_0.5Fe_0.5)_A[Ni_0.5Fe_1.5]_BO₄, where A is the tetrahedral and B, the octahedral sublattice. MöS in an external magnetic field (5 T) at 4.2 K shows non-collinearity of the sublattices’ magnetic moments and deviations in the hyperfine magnetic field that could be related to a canting effect. Magnetic measurements were applied to characterize the temperature behavior of the magnetic properties and the a.c. complex magnetic susceptibility.     

Magnetic and electrical properties of bulk BaTiO3+MgFe2O4 composite

BaTiO₃+MgFe₂O₄ material system was synthesized by hybrid chemical process using chlorides and nitrates of barium, titanium, iron, and magnesium. Magnetic properties of the composite samples measured as a function of annealing conditions indicated soft magnetic behavior. Saturation specific magnetization from 8 21 emu/g was observed for samples annealed at temperature between 950 and 1150 °C. Variation of specific saturation magnetization with respect to annealing temperature was related with the distribution of Fe cations in the tetrahedral and octahedral sites of MgFe₂O₄. Electrical properties of the samples annealed at different temperatures were measured to analyze the coexistence of ferroelectric phase. Dielectric constant varying from 15 to 200 with respect to frequency was observed for samples annealed from 950 to 1150 °C.     

Solid state reaction synthesis of NiFe2O4 nanoparticles

Ni-ferrite (NiFe₂O₄) nanoparticles have been synthesized via a solid state reaction process. Ni and Fe bi-metallic nanoparticles in the form of Ni₃₃Fe₆₇ alloy nanopowder are first synthesized by simultaneous evaporation of the required amounts of pure Ni and Fe metals followed by rapid condensation of the evaporated metal flux into solid state by means of an inert gas, helium, using the process of inert gas condensation (IGC). In order to form the NiFe₂O₄ structure, as-synthesized samples (Ni₃₃Fe₆₇) are annealed for 12 h in ambient conditions at different annealing temperatures. Structural analyses show that NiFe₂O₄ starts to form at around 450 °C and gets progressively well defined with increasing annealing temperatures yielding particle with size ranging between 15 and 50 nm. Besides successfully forming NiFe₂O₄, NiO/Fe₃O₄ core/shell nanoparticles have also been synthesized by adjusting the annealing conditions. Three different structures, Ni₃₃Fe₆₇, NiO/Fe₃O₄, and NiFe₂O₄, obtained in this study are compared with respect to their structural and magnetic properties.     

Effects of annealing temperature on structure and magnetic properties of CoAl0.2Fe1.8O4/SiO2 nanocomposites

CoAl_0.2Fe_1.8O₄/SiO₂ nanocomposites were prepared by sol–gel method. The effects of annealing temperature on the structure and magnetic properties of the samples were studied by X-ray diffraction, transmission electron microscopy, vibrating sample magnetometer and Mössbauer spectroscopy. The results show that the CoAl_0.2Fe_1.8O₄ in the samples exhibits a spinel structure after being annealed. As annealing temperature increases from 800 to 1200 °C, the average grain size of CoAl_0.2Fe_1.8O₄ in the nanocomposites increases from 5 to 41 nm while the lattice constant decreases from 0.8397 to 0.8391 nm, the saturation magnetization increases from 21.96 to 41.53 emu/g. Coercivity reaches a maximum of 1082 Oe for the sample annealed at 1100 °C, and thereafter decreases with further increasing annealing temperature. Mössbauer spectra show that the isomer shift decreases, hyperfine field increases and the samples transfer from mixed state of superparamagnetic and magnetic order to the completely magnetic order with annealing temperature increasing from 800 to 1200 °C.     

Electronic structure studies of the spinel CoFe2O4 by X-ray photoelectron spectroscopy

The spinel CoFe₂O₄ has been synthesized by combustion reaction technique. X-ray photoelectron spectroscopy shows that samples are near-stoichiometric, and that the specimen surface both in the powder and bulk sample is most typically represented by the formula (Co_0.4Fe_0.6)[Co_0.6Fe_1.4]O₄, where cations in parentheses occupy tetrahedral sites and those within square brackets in octahedral sites. The results demonstrate that most of the iron ions are trivalent, but some Fe²⁺ may be present in the powder sample. The Co 2p_3/2 peak in powder sample composed three peaks with relative intensity of 45%, 40% and 15%, attributes to Co²⁺ in octahedral sites, tetrahedral sites and Co³⁺ in octahedral sites. The O 1s spectrum of the bulk sample is composed of two peaks: the main lattice peak at 529.90 eV, and a component at 531.53 eV, which is believed to be intrinsic to the sample surface. However, the vanishing of the O 1s shoulder peak of the powder specimen shows significant signs of decomposition.     

Grain size effect on the dielectric and magnetic properties of NiFe2O4 ceramics

Nanocrystalline NiFe₂O₄ powders with different crystal sizes were hydrothermally synthesized with different alkali concentrations at 230 °C. Then the NiFe₂O₄ nanopowders were sintered at various temperatures to obtain NiFe₂O₄ ceramics with different grain sizes. The NiFe₂O₄ ceramic properties were strongly dependent on the grain size. With the increase in the grain size, saturation magnetization (M_s) and magnetic permeability (μ) increased, Curie temperature (T_c) decreased. Dielectric constant enhanced and dielectric loss decreased in nanoferrites. The possible mechanism of grain size dependences was discussed in detail.     

Effects of Mn substitution of Co and Fe in spinel CoFe2O4 thin films

Effects of Mn substitution for Co and Fe on the structural and magnetic properties of inverse-spinel CoFe₂O₄ have been investigated. Mn_xCo_1−xFe₂O₄ and Mn_yCoFe_2−yO₄ thin films were prepared by a sol–gel method. The observed increase of the lattice constant of Mn_xCo_1−xFe₂O₄ indicates that Mn²⁺ ions substitute the octahedral Co²⁺ sites. Conversion electron Mössbauer spectroscopy data indicate that a fraction of octahedral Co²⁺ ions exchange sites with tetrahedral Fe³⁺ ions through Mn doping. Vibrating-sample magnetometry data exhibit a large increase of saturation magnetization for both Mn_xCo_1−xFe₂O₄ and Mn_yCoFe_2−yO₄ films compared to that of the CoFe₂O₄ film. Such enhancement of magnetization can be explained in terms of a breaking of ferrimagnetic order induced by the Co²⁺ migration.     

Analysis of exchange bias effect of NiO+NiFe2O4 composites

Exchange bias (EB) and magnetic properties of ferrimagnetic (FI) NiFe₂O₄ and antiferromagnetic (AFM) NiO bulk composites, prepared by a chemical co-precipitation and post-thermal decomposition method from Fe-doped NiO matrix, have been investigated. Enhanced coercivities and shifted hysteresis loops are still observed for these samples after field cooling. But the vertical magnetization shifts are not observed. In comparison with the bulk samples, a NiO/10% NiFe₂O₄ nanocomposite was also prepared via direct mixture, in which both the horizontal and vertical shift in the hysteresis loops are observed at 10 K. The observed phenomena are explained in terms of interfacial exchange interaction between the two phases and the finite-size effect, respectively.     

Studies on Structural, Magnetic and Thermal Properties of xFe2TiO4-(1−x)Fe3O4 (0≤x≤1) Pseudo-binary System

The xFe₂TiO₄-(1−x)Fe₃O₄ pseudo-binary systems (0≤x≤1) of ulvöspinel component were synthesized by solid-state reaction between ulvöspinel Fe₂TiO₄ precursors and commercial Fe₃O₄ powders in stochiometric proportions. Crystalline structures were determined by X-ray powder diffraction (XRD) and it was found that the as-obtained titanomagnetites maintain an inverse spinel structure. The lattice parameter a of synthesized titanomagnetite increases linearly with the increase in the ulvöspinel component. ⁵⁷Fe room temperature Mössbauer spectra were employed to evaluate the magnetic properties and cation distribution. The hyperfine magnetic field is observed to decrease with increasing Fe₂TiO₄ component. The fraction of Fe²⁺ in both tetrahedral and octahedral sites increases with the increase in Ti⁴⁺ content, due to the substitution and reduction of Fe³⁺ by Ti⁴⁺ that maintains the charge balance in the spinel structure. For x in the range of 0 ≤x≤0.4, the solid solution is ferrimagnetic at room temperature. However, it shows weak ferrimagnetic and paramagnetic behavior for x in the range of 0.4<x≤0.7. When x>0.70, it only shows paramagnetic behavior, with the appearance of quadrupole doublets in the Mössbauer spectra. Simultaneous differential scanning calorimetry and thermogravimetric analysis (DSC-TGA) studies showed that magnetite is not stable, and thermal decomposition of magnetite occurs with weight losses accompanying with exothermic processes under heat treatment in inert atmosphere.     

Micro-Raman and photoluminescence spectra of Sm-doped β-BaB2O4 crystal lines written by YAG laser irradiation in glass

Nonlinear optical β-BaB₂O₄ (β-BBO) crystal straight lines are written in 10Sm₂O₃·40BaO·50B₂O₃ glass by irradiation of a continuous wave Nd:YAG laser operating at 1064 nm. The linearly polarized micro-Raman scattering spectra for β-BBO crystal lines are consistent with those for commercially available y-cut β-BBO bulk single-crystals, supporting that β-BBO crystal straight lines with the c-axis orientation along the YAG laser scanning direction might be single-crystals. The photoluminescence spectra with large intensities and Stark splitting are observed for β-BBO crystal lines, and it is concluded that some amounts of Sm³⁺ ions in the glass are incorporated into β-BBO crystal lines. Two-dimensional β-BBO crystal curved lines with a bending angle of 30° are successfully written in 10Sm₂O₃·42BaO·48B₂O₃ glass.     

Chemical synthesis of spinel nickel ferrite (NiFe2O4) nano-sheets

The present investigation is related to the deposition of single-phase nano-sheets spinel nickel ferrite (NiFe₂O₄) thin films onto glass substrates using a chemical method. Nano-sheets nickel ferrite films were deposited from an alkaline bath containing Ni²⁺ and Fe²⁺ ions. The films were characterized for their structural, surface morphological and electrical properties by means of X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and two-point probe electrical resistivity techniques. The X-ray diffraction pattern showed that NiFe₂O₄ nano-sheets are oriented along (3 1 1) plane. The FT-IR spectra of NiFe₂O₄ films showed strong absorption peaks around 600 and 400 cm⁻¹ which are typical for cubic spinel crystal structure. Microstructural study of NiFe₂O₄ film revealed nano-sheet like morphology with average sheet thickness of 30 nm. The room temperature electrical resistivity of the NiFe₂O₄ nano-sheets was 10⁷ Ω cm.     

Optical and electronic properties of NiFe2O4 and CoFe2O4 thin films

We report the optical and electronic properties of the inverse spinel ferrite NiFe₂O₄ and CoFe₂O₄ thin films deposited on single crystal sapphire by electron beam deposition. We carried out variable temperature (78–500 K) transmittance measurements on the thin films to investigate the optical properties and electronic structures of these ferrites. The absorption spectra of both NiFe₂O₄ and CoFe₂O₄ thin films show insulating characters with Ni (Co) d to d on-site transitions below 3 eV. The energy bands above 3 eV are mainly due to the O 2p to Fe 3d charge transfer transitions. The observed electronic transitions have been assigned based on the first principles calculations and comparisons with structurally similar Ni and Co-containing compounds. The Co²⁺ d to d transition in the CoFe₂O₄ thin film shows a strong temperature dependence, likely due to the spin-charge coupling effect.     

Magnetic properties of La-substituted NiFe2O4 via egg-white precursor route

Nano-sized NiFe_2−xLa_xO₄ ferrites (x=0.00, 0.01, 0.02, 0.03, 0.04, 0.5, 0.07 and 0.09) were synthesized for the first time by using metal nitrate and egg-white extract in aqueous medium. The ferrites were characterized by DTA-TG, XRD, TEM, FT-IR and VSM techniques. The thermal decomposition behavior revealed that the precursors were completely decomposed at about 420 °C. TEM image shows agglomerated nanoparticles with crystallite sizes agrees well with that estimated by XRD measurement. XRD patterns show a secondary phase of LaFeO₃ besides the cubic structure of the La-substituted ferrites. The lattice parameters, X-ray density and crystallite size were found to increase with the increasing La content. The VSM measurement exhibited a ferromagnetic property for all the samples at room temperature. With increasing La, M_s was found to decrease while H_c increased. The decrease in the saturation magnetization is attributed to the paramagnetic properties of lanthanum, which prefer to substitute iron present in the octahedral sites. The increase in the coercivity is due to either the stronger magnetocrystalline anisotropy induced by La substitution or the change in the crystallite size.     

Immiscibility in the Fe3O4-FeCr2O4 spinel binary

A recent thermodynamic model of mixing in spinel binaries, based on changes in cation disordering (x) between tetrahedral and octahedral sites [Am. Mineral. 68 (1983) 18, 69 (1984) 733], is investigated for applicability to the Fe₃O₄-FeCr₂O₄ system under conditions where incomplete mixing occurs. Poor agreement with measured consolute solution temperature and solvus [N. Jb. Miner. Abh. 111 (1969) 184] is attributed to neglect of: (1) ordering of magnetic moments of cations in the tetrahedral sublattice antiparallel to the moments of those in the octahedral sublattice and (2) pair-wise electron hopping between octahedral site Fe³⁺ and Fe²⁺ ions. Disordering free energies (ΔG_D), from which free energies of mixing are calculated, are modeled by

     

Structural, microstructural and magnetic properties of NiFe2O4, CoFe2O4 and MnFe2O4 nanoferrite thin films

The structural, microstructural and magnetic properties of nanoferrite NiFe₂O₄ (NF), CoFe₂O₄ (CF) and MnFe₂O₄ (MF) thin films have been studied. The coating solution of these ferrite films was prepared by a chemical synthesis route called sol-gel combined metallo-organic decomposition method. The solution was coated on Si substrate by spin coating and annealed at 700 °C for 3 h. X-ray diffraction pattern has been used to analyze the phase structure and lattice parameters. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used to show the nanostructural behavior of these ferrites. The values of average grain's size from SEM are 44, 60 and 74 nm, and from AFM are 46, 61 and 75 nm, respectively, measured for NF, CF and MF ferrites. At room temperature, the values of saturation magnetization, M_s∼50.60, 33.52 and 5.40 emu/cc, and remanent magnetization, M_r∼14.33, 15.50 and 1.10 emu/cc, respectively, are observed for NF, CF and MF. At low temperature measurements of 10 K, the anisotropy of ferromagnetism is observed in these ferrite films. The superparamagnetic/paramagnetic behavior is also confirmed by χ′(T) curves of AC susceptibility by applying DC magnetizing field of 3 Oe. The temperature dependent magnetization measurements show the magnetic phase transition temperature.