苯乙烯－乙烯共聚物的合成及其结构性能的研究

用负载型钛系催化剂ＭｇＣｌ_２／ＴｉＣｌ_４，ＮｄＣｌ_３／ＡｌＥｔ_３（ＳＮ－１催化剂）制备出组份比例变化的苯乙烯－乙烯共聚产物．共聚产物通过溶剂萃取分离、~１３Ｃ－ＮＭＲ、ＩＲ、动态粘弹谱进行表征，并初步进行了与聚苯乙烯（ａＰＳ）共混作用的研究．结果表明，ＳＮ－１催化剂能有效地催化苯乙烯与乙烯共聚合．共聚产物为含有均聚聚苯乙烯的共聚物复合物，其中的２５ｍｏｌ％的苯乙烯参加了共聚．共聚产物与ａＰＳ共混可明显提高ａＰＳ的冲击强度和断裂伸长率．     

THE EXCITED STATES AND VIBRATIONAL FREQUENCIES OF Bli_2~e（e＝0，＋1，－1）CLUSTERS

ＴＨＥＥＸＣＩＴＥＤＳＴＡＴＥＳＡＮＤＶＩＢＲＡＴＩＯＮＡＬＦＲＥＱＵＥＮＣＩＥＳＯＦＢｌｉ：（ｅ＝０，＋１，－１）ＣＬＵＳＴＥＲＳＴＨＥＥＸＣＩＴＥＤＳＴＡＴＥＳＡＮＤＶＩＢＲＡＴＩＯＮＡＬＦＲＥＱＵＥＮＣＩＥＳＯＦＢｌｉ：（ｅ＝０，＋１，－１）Ｃ...     

新型五甲基茂基三苄氧基钛／甲基铝氧烷催化剂合成苯乙烯—乙烯共聚？…

以五甲基茂基三苄氧基钛〔Ｃp＊Ｔi（ＯＢz）３〕和甲基铝氧烷（ＭＡＯ）组成的催化体 用本体法合成出苯乙烯－乙烯共聚物Ｐoly（Ｓ－ｃｏ－Ｅ）。考察了共聚温度,共聚时间 ,Ａ１／Ｔi摩尔比,主催化剂浓度〔Ｔi〕等条件对共聚反应的影响。共聚产物经沸丁酮,沸四氢呋喃（ＴＨＦ）连续抽提分离,发现共聚物主要存在于ＴＨＦ可溶级分中。可溶级分经ＤＳＣ,＾１３Ｃ－ＮＭＲ,ＷＡＸＤ,ＤＭＡ等手段分析,证明苯乙烯－乙烯共聚物为     

苯乙烯－乙烯共聚物的合成及其结构性能的研究

用负载型钛系催化剂ＭｇＣｌ２／ＴｉＣｌ４，ＮｄＣｌ３／ＡｌＥｔ３（ＳＮ－１催化剂）制备出组份比例变化的苯乙烯－乙烯共聚产物，共聚产物通过溶剂萃取分离，＾１３Ｃ－ＮＭＲ，ＩＲ，动态粘弹谱进行表征，并初步进行了与聚苯乙烯共混作用的研究。结果表明，ＳＮ－１催化剂能有效地催化苯乙烯与乙烯共聚合，共聚产物为含有均聚聚苯乙烯的共聚复合物，其中约２５ｍｏｌ％的苯乙烯参加了共聚。共聚产物与ａＰＳ共混可明显提高ａＰ     

苯乙烯—环氧乙烷嵌段共聚物的阴离子聚合与表征

用二苯甲烷钾为引发剂,阴离子聚合法合成了苯乙烯（Ｓｔ）－环氧乙烷（ＥＯ）嵌段共聚物,并用ＦＴＩＲ,＾１Ｈ－ＮＭＲ,ＳＥＣ,ＷＡＸＤ和动态粘弹谱对共聚物进行了表征。结果表明所得聚合物为分子量可控,窄分布的两嵌段共聚物。     

STUDIES ON THE SYNTHESIS AND REACTIONS OF N－（1－OXO－4－CARBONYL－2，6，7－TRIOXA－1－PHOSPHABICYCLO ［2．2．2］ OCTANE）－N＇－ARYL THIOUREAS

ＳＴＵＤＩＥＳＯＮＴＨＥＳＹＮＴＨＥＳＩＳＡＮＤＲＥＡＣＴＩＯＮＳＯＦＮ－（１－ＯＸＯ－４－ＣＡＲＢＯＮＹＬ－２，６，７－ＴＲＩＯＸＡ－１－ＰＨＯＳＰＨＡＢＩＣＹＣＬＯ［２．２．２］ＯＣＴＡＮＥ）－Ｎ’－ＡＲＹＬＴＨＩＯＵＲＥＡＳＹｕＧｕｉＬＩ；Ｘｕ...     

ASYMMETRIC SYNTHESIS ⅩⅩⅧ: ENANTIOSELECTIVE REDUCTION OF AROMATIC KETONES CATALYZED BY NEW CHIRAL CATALYST-(4R,8R,9S)-CAMPHANE[8,9-b]-1,3,2-OXATHIOBOROLIDINE

ＡＳＹＭＭＥＴＲＩＣＳＹＮＴＨＥＳＩＳⅩⅩⅧ：ＥＮＡＮＴＩＯＳＥＬＥＣＴＩＶＥＲＥＤＵＣＴＩＯＮＯＦＡＲＯＭＡＴＩＣＫＥＴＯＮＥＳＣＡＴＡＬＹＺＥＤＢＹＮＥＷＣＨＩＲＡＬＣＡＴＡＬＹＳＴ－（４Ｒ，８Ｒ，９Ｓ）－ＣＡＭＰＨＡＮＥ［８，９－ｂ］－１，３，...     

SYNTHESIS, CHARACTERIZATION OF 2-[2-(3-NITRO-4-METHOXYLPHENYL) VINYLI-1-ME

ＳＹＮＴＨＥＳＩＳ，ＣＨＡＲＡＣＴＥＲＩＺＡＴＩＯＮＯＦ２－［２－（３－ＮＩＴＲＯ－４－ＭＥＴＨＯＸＹＬＰＨＥＮＹＬ）ＶＩＮＹＬＩ－１－ＭＥＴＨＹＬＰＹＲＩＤＩＮＩＵＭＰＥＮＴＡＡＮＤＨＥＸＡＮＩＴＲＡＴＯＲＡＲＥＥＡＲＴＨ（Ⅲ）ＣＯＭＰＬＥＸＥＳＨ...     

聚乙二醇-聚二氧六环酮嵌段共聚物的合成及表征

用辛酸亚锡［Ｓｎ（Ｏｃｔ）２］作催化剂，进行了端羟基聚乙二醇（ＰＥＧ）和１，４ 二氧六环酮（ＤＯＮ）的共聚反应，得到嵌段共聚物ＰＤＯＮ ｂ ＰＥＧ ｂ ＰＤＯＮ．根据１Ｈ ＮＭＲ谱图计算结果表明共聚物组成随两组分投料比而改变．共聚物的ＤＳＣ结果表明嵌段共聚物中ＰＤＯＮ的熔点和结晶度的变化相对较小，而ＰＥＧ的熔点及结晶度均有较大降低．将ＰＥＧ引入可大大提高材料的吸水率．     

SYNTHESIS AND ANTI－HUMAN IMMUNODEFICIENCY VIRUS－1（HIV－1） ACTIVITY OF 9－（2－PHOSPHONYLMETHOXYETHYL）ADENINE （1）AND ITS REGIOISOMER 3－（2－PHOSPHONYLMETHOXYETHYL）ADENINE（2）

ＳＹＮＴＨＥＳＩＳＡＮＤＡＮＴＩ－ＨＵＭＡＮＩＭＭＵＮＯＤＥＦＩＣＩＥＮＣＹＶＩＲＵＳ－１（ＨＩＶ－１）ＡＣＴＩＶＩＴＹＯＦ９－（２－ＰＨＯＳＰＨＯＮＹＬＭＥＴＨＯＸＹＥＴＨＹＬ）ＡＤＥＮＩＮＥ（１）ＡＮＤＩＴＳＲＥＧＩＯＩＳＯＭＥＲ３－（２－ＰＨＯ...     

Solution properties of ethylene-vinyl acetate copolymers

High-pressure ethylene–vinyl acetate copolymers of four different chemical compositions(9%, 15%, 45%, and 70% VA) were characterized to determine molecular weight and distribution. The four samples were fractionated by solvent–nonsolvent precipitation methods. Light-scattering, osmometry, and viscosity measurements were made on these fractionated copolymers to determine weight-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_w } $\end{document}, number-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_n } $\end{document}, molecular size in solution, and interaction constants. Dilute solution viscosity was measured on the fractions to determine intrinsic viscosity and Huggins' constant k′. Viscosity–molecular weight equations were established for the four copolymer compositions. The log intrinsic viscosity versus log molecular weight diagrams were analyzed and the average length of branches calculated. The composition of the polymer fractions, determined by C and H combustion analysis, was found not to vary significantly with molecular weight. The uniformly random character of the E/VA copolymers was thereby confirmed. The density of the fractions was determined by density-gradient column method. Chain sequence distribution of monomer units for the four copolymers was calculated by using IBM 704 computations involving the actual monomer reactivity ratios. Long sequences of either ethylene or vinyl acetate are improbable, except at the extremes of copolymer composition.     

DEPENDENCE OF THE DISTRIBUTION OF ACTIVE CENTERS ON MONOMER IN SUPPORTED ZIEGLER-NATTA CATALYSTS

Distribution of active centers(ACD)of ethylene or 1-hexene homopolymerization and ethylene-1-hexene copolymerization with a MgCl_2/TiCl_4 type Z-N catalyst were studied by deconvolution of the polymer molecular weight distribution into multiple Flory components.Each Flory component is thought to be formed by a certain type of active center. ACD of ethylene-1-hexene copolymer with very low 1-hexene incorporation was compared with that of ethylene homopolymer to see the effect of introducingα-olefin on eth...     

Block copolymers by polymer modification: Conversion of polyisoprene segment to hydroxylated polyisoprene

Polyisoprene (PIP) was found to react with trifluoroacetic acid (TFA) to give an adduct. Saponification of the ester gave a new alternating copolymer of ethylene and α-methyl vinyl alcohol. TFA did not react with polybutadiene (PBD) under these conditions, thus providing a way to produce amphiphilic block copolymers from PBD-b-PIP. TFA addition to the PIP block took place cleanly at an ambient temperature with 2 equiv of the acid in toluene to give block copolymer of PBD and trifluoroacetated PIP. This polymer is very soluble in toluene regardless of molecular weight. Methanolysis with NaOMe cleaved the ester to give PDB-b-(ethylene-alt-α-methyl vinyl alcohol) (PIPOH) in a MeOH/toluene mixture. Low molecular weight hydroxylated diblock copolymer is a viscous liquid when the ratio of PIP/PBD is 0.1 ( $\overline {M_n }$ = 4100, D = 1.3), but a solid with the ratio 0.5 ($\overline {M_n }$ = 7170, D = 1.6). High molecular weight polymer ($\overline {M_n }$ = 114,000, D = 1.4) with PIP/PBD ratio 0.1 is a hazy rubbery material. Block copolymers of PIPOH and poly(methacrylic acid) was also obtained from copolymers of PIP and poly(t-butyl methacrylate). The hydroxylated copolymers showed surface activity by monolayer formation on a Langmuir–Blodgett trough. The transfer of the monolayer on a silicon wafer gave z-type deposition, with the average ellipsometer thickness of the layer being about 40 Å thick per monolayer for $\overline {M_n }$ = 4100 copolymer. © 1994 John Wiley & Sons, Inc.     

Ethylene–Norbornene Copolymerization by Carbon Nanotube‐Supported Metallocene Catalysis: Generation of High‐Performance Polyolefinic Nanocomposites

Homogeneous surface coating of multi‐walled carbon nanotubes is achieved for the first time by in situ copolymerization of ethylene (E) and 2‐norbornene (N) as catalyzed directly from the nanotube surface previously treated by a highly active metallocene‐based complex, i.e., rac‐Et(Ind)₂ZrCl₂/MMAO‐3A. The copolymerization reaction allows for the destructuration of the native nanotube bundles, which upon further melt blending with an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) matrix, leads to high‐performance polyolefinic nanocomposites. The microstructural analysis of the surface‐coating copolymer was carried out by ¹³C NMR spectroscopy and allowed determination of the actual N content incorporated along the chains. Depending on the experimental conditions used (e.g., E pressure, solvent, feed N concentration) the relative quantity of E–N copolymer can be tuned, as well as the N content in the formed copolymers and accordingly their glass transition temperature.

     

Ethylene-vinyl acetate semi-batch emulsion copolymerization: Use of factorial experiments for process optimization

The application of factorial experiments to optimize the ethylene-vinyl acetate emulsion polymerization process is described herein. A prior extensive experimental phase identified those variables that are most important for ethylene-vinyl acetate emulsion copolymer production. The effects of temperature, pressure, added co-solvent, vinyl acetate feed rate and emulsifier type, and concentration on the rate of polymerization, cumulative copolymer composition, molecular weight averages, and particle size and number are described in this article. The primary objectives of this research were to increase the amount of ethylene that could be incorporated into the copolymer at reduced temperatures and pressures (our target was a copolymer with an ethylene content of 30% by weight at 500 psig and 20°C versus the commonly employed industrial conditions in excess of 1000 psig), to achieve an improved process understanding, and to accumulate reliable data for modelling purposes. A copolymer containing 34% by weight of ethylene has been achieved at a pressure of 500 psig and a temperature of 20°C. The confusion present in the literature surrounding emulsifier effects has also been clarified. A discussion of hydrolysis, experimental reproducibility, and glass transition temperatures is also included. The sequential nature of the experimental process is illustrated throughout these optimizing experiments. © 1994 John Wiley & Sons, Inc.     

Polyethylene Nanocomposite Heat‐Sealants with a Versatile Peelable Character

A novel heat‐sealing performance is achieved by polyethylene (PE) nanocomposites reinforced by ethylene vinyl acetate (EVA) and montmorillonite (MMT). Appropriate nanocomposite design leads to hermetic seals with a general peelable/easy‐open character across the broadest possible sealing temperature range. Observations of the fracture seal surfaces by infrared spectroscopy and electron microscopy reveal that this behavior originates from a synergistic effect of the EVA copolymer and the montmorillonite clay nanofiller. Namely, the combination of EVA‐copolymers and MMT nanofillers provides sufficiently favorable interactions for nanocomposite formation and mechanical robustness, but weak enough interfacial adhesion to promote a general cohesive failure of the sealant at the EVA/MMT interfaces.

     

Orthogonal Synthesis of Block Copolymer via Photoinduced CuAAC and Ketene Chemistries

A novel route for the synthesis of poly(ethylene glycol)‐b‐polystyrene copolymer, starting from commercially available poly(ethylene glycol) methyl ether and azido terminated polystyrene prepared by atom transfer radical polymerization and subsequent nucleophilic substitution, is applied with simplicity and high efficiency. The combination of photoinduced copper (I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) and ketene chemistry reactions proceeds either simultaneously or sequentially in a one‐pot procedure under near‐visible light irradiation. In both cases, excellent block copolymer formations are achieved, with an average molecular weight of around 7000 g mo1⁻¹ and a polydispersity index of 1.20.

     

Syntheses of heparin - like pentamers containing “opened” uronic acid moieties

The syntheses of four analogues of pentasaccharide Ia, which corresponds to the minimal AT III binding region of heparin, are presented and the biological activities of these analogues will be discussed. Three of these analogues (i.e. compounds II, III and IV) contain an R-glyceric acid oxymethylene residue (i.e. B in fig.3) instead of -L-iduronic acid and in the other analogue (i.e. compound V) the β-D-glucuronic acid unit has been replaced by an s-glyceric acid oxymethylene residue (i.e. A in fig3). The R and S-glyceric acid oxymethylene residues represent an “opened” iduronic acid unit and an “opened” glucuronic acid unit, respectively, containing the essential carboxylate function in the appropriate configuration. The crucial step in the syntheses of these “opened” uronic acid pentamer analogues, was the preparation of the required glyceric acid oxymethylene residues 8a, 8b and 8c.

Analogues II and III, containing an “opened” iduronic acid moiety, display a significant AT III mediated Xa activity. Compound III contains two extra sulphate groups at unit 2. Removal of the contributing O-sulphate groups at position 3 and 6 of unit 6 of compound II (i.e. compound IV) results in a seven-fold drop in Xa activity. Replacement of the β-D-glucuronic acid unit by an S-glyceric acid oxymethylene residue (i.e. compound V) leads to almost a complete loss of Xa activity, notwithstanding the fact that all the essential and contributing charged groups are present in the molecule.     

Ethylene–vinyl acetate semi-batch emulsion copolymerization: Experimental design and preliminary screening experiments

Ethylene–vinyl acetate emulsion copolymers are useful materials for paint, adhesive, and coating applications. The kinetics of their production remain largely unstudied, probably due to the inherent difficulties associated with pressure polymerizations. Polymerizations at elevated pressures are in general more difficult to understand and control, and relatively more expensive since one has to consider the added cost of increased safety precautions. Reported here are the preliminary results of an extensive experimental investigation of the variables which govern the ethylene–vinyl acetate emulsion process. Two redox initiator systems have been identified as more suitable for the polymerization process. Two buffer systems, namely sodium acetate/acetic acid and potassium phosphate, have been used to effectively control pH. The addition of n-hexane has offered an effective method of enhancing the ethylene content in the copolymer produced. Several other important variables including agitation/mixing and emulsifier type and concentration have been identified and are discussed. These screening experimental observations have aided in the selection of suitable design levels for future, more focused experimentation to quantify the effects of reaction variables on the latex and copolymer properties of interest. A review of the existing literature on ethylene–vinyl acetate copolymer properties and processes is also included. © 1993 John Wiley & Sons, Inc.     

Photo‐Crosslinked Biodegradable Hydrogels Prepared From Fumaric Acid Monoethyl Ester‐Functionalized Oligomers for Protein Delivery

Photo‐crosslinkable, fumaric acid monoethyl ester‐functionalized triblock oligomers are synthesized and copolymerized with N‐vinyl‐2‐pyrrolidone to form biodegradable photo‐crosslinked hydrogels. Poly(ethylene glycol) is used as the middle hydrophilic segment and the hydrophobic segments are based on D ,L ‐lactide, trimethylene carbonate or a mixture of these monomers. Two model proteins, lysozyme and albumin, are incorporated in the hydrogels and their release is studied. The composition of the hydrophobic segments could be used to tune degradation behavior and release rates. Careful optimization of photo‐polymerization conditions is needed to limit conjugation of proteins to the hydrogels and protein denaturation.