Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

Functionalization of graphene oxide towards thermo‐sensitive nanocomposites via moderate in situ SET‐LRP

A mild and efficient strategy is presented for growing thermo‐sensitive polymers directly from the surface of exfoliated graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of GO sheets followed by in situ growing poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) via single‐electron‐transfer living radical polymerization (SET‐LRP). Considering the lack of reactive functional groups on the surface of GO, exfoliated GO sheets were subjected to an epoxide ring opening reaction with tris(hydroxymethyl) aminomethane (TRIS) at room temperature. The initiating groups were grafted onto TRIS‐GO sheets by treating hydroxyls with 2‐bromo‐2‐methylpropionyl bromide at room temperature. PPEGEEMA chains were synthesized by in situ SET‐LRP using CuBr/Me₆TREN as catalytic system at 40 °C in H₂O/THF. The resulting materials were characterized using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of GO sheets. After grafting with PPEGEEMA, the modified GO sheets still maintained the separated single layers and the dispersibility was significantly improved. This TRIS‐GO‐PPEGEEMA hybrid material shows reversible self‐assembly and deassembly in water by switching temperature at about 34 °C. Such smart graphene‐based materials promise important potential applications in thermally responsive nanodevices and microfluidic switches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

Investigation of the Thermal Stability of the Carbon Framework of Graphene Oxide

In this study, we use our recently prepared graphene oxide (GO) with an almost intact σ‐framework of carbon atoms (ai‐GO) to probe the thermal stability of the carbon framework for the first time. Ai‐GO exhibits few defects because CO₂ formation is prevented during synthesis. Ai‐GO was thermally treated before chemical reduction and the resulting defect density in graphene was subsequently determined by statistical Raman microscopy. Surprisingly, the carbon framework of ai‐GO is stable in thin films up to 100 °C. Furthermore, we find evidence for an increase in the quality of ai‐GO upon annealing at 50 °C before reduction. The carbon framework of GO prepared according to the popular Hummers’ method (GO‐c) appears to be less stable and decomposition starts at 50 °C, which is qualitatively indicated by CO₂‐trapping experiments in μm‐thin films. Information about the stability of GO is important for storing, processing, and using GO in many applications.     

Self‐Construction from 2D to 3D: One‐Pot Layer‐by‐Layer Assembly of Graphene Oxide Sheets Held Together by Coordination Polymers

Deposition of Ni‐based cyanide bridged coordination polymer (NiCNNi) flakes onto the surfaces of graphene oxide (GO) sheets, which allows precise control of the resulting lamellar nanoarchitecture by in situ crystallization, is reported. GO sheets are utilized as nucleation sites that promote the optimized crystal growth of NiCNNi flakes. The NiCNNi‐coated GO sheets then self‐assemble and are stabilized as ordered lamellar nanomaterials. Regulated thermal treatment under nitrogen results in a Ni₃C–GO composite with a similar morphology to the starting material, and the Ni₃C–GO composite exhibits outstanding electrocatalytic activity and excellent durability for the oxygen reduction reaction.     

CC Bonding of Graphene Oxide on 4‐Aminophenyl Modified Gold Electrodes towards Simultaneous Detection of Heavy Metal Ions

This paper studied the electrochemical sensors based on C? C bonding of graphene oxide (GO) on π‐conjugated aromatic group modified gold electrodes for simultaneous detection of heavy metal ions. For comparison, another sensing interface Au‐Ph‐NH‐CO‐GO, in which GO was modified to Au‐Ph‐NH₂ interfaces by amide bonding. On the basis of the principle of heavy metal ions complexation with oxygenated species on GO, the fabricated sensing interfaces were used for the simultaneous determination of Pb²⁺, Cu²⁺ and Hg²⁺. The performance of two sensing interfaces for simultaneous detection of three metal ions was compared. Au‐Ph‐GO sensing interface demonstrated higher sensitivity and better repeatability than Au‐Ph‐NH‐CO‐GO sensing interface.     

Mild Synthesis of Pt/SnO2/Graphene Nanocomposites with Remarkably Enhanced Ethanol Electro‐oxidation Activity and Durability

We have designed a new Pt/SnO₂/graphene nanomaterial by using L ‐arginine as a linker; this material shows the unique Pt‐around‐SnO₂ structure. The Sn²⁺ cations reduce graphene oxide (GO), leading to the in situ formation of SnO₂/graphene hybrids. L ‐Arginine is used as a linker and protector to induce the in situ growth of Pt nanoparticles (NPs) connected with SnO₂ NPs and impede the agglomeration of Pt NPs. The obtained Pt/SnO₂/graphene composites exhibit superior electrocatalytic activity and stability for the ethanol oxidation reaction as compared with the commercial Pt/C catalyst owing to the close‐connected structure between the Pt NPs and SnO₂ NPs. This work should have a great impact on the rational design of future metal–metal oxide nanostructures with high catalytic activity and stability for fuel cell systems.     

Three‐Dimensional Nitrogen‐Doped Reduced Graphene Oxide–Carbon Nanotubes Architecture Supporting Ultrafine Palladium Nanoparticles for Highly Efficient Methanol Electrooxidation

A three‐dimensional (3D) nitrogen‐doped reduced graphene oxide (rGO)–carbon nanotubes (CNTs) architecture supporting ultrafine Pd nanoparticles is prepared and used as a highly efficient electrocatalyst. Graphene oxide (GO) is first used as a surfactant to disperse pristine CNTs for electrochemical preparation of 3D rGO@CNTs, and subsequently one‐step electrodeposition of the stable colloidal GO–CNTs solution containing Na₂PdCl₄ affords rGO@CNTs‐supported Pd nanoparticles. Further thermal treatment of the Pd/rGO@CNTs hybrid with ammonia achieves not only in situ nitrogen‐doping of the rGO@CNTs support but also extraordinary size decrease of the Pd nanoparticles to below 2.0 nm. The resulting catalyst is characterized by scanning and transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, and X‐ray photoelectron spectroscopy. Catalyst performance for the methanol oxidation reaction is tested through cyclic voltammetry and chronoamperometry techniques, which shows exceedingly high mass activity and superior durability.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Low‐Temperature Solid‐State Microwave Reduction of Graphene Oxide for Transparent Electrically Conductive Coatings on Flexible Polydimethylsiloxane (PDMS)

Microwaves (MWs) are applied to initialize deoxygenation of graphene oxide (GO) in the solid state and at low temperatures (～165 °C). The Fourier‐transform infrared (FTIR) spectra of MW‐reduced graphene oxide (rGO) show a significantly reduced concentration of oxygen‐containing functional groups, such as carboxyl, hydroxyl and carbonyl. X‐ray photoelectron spectra confirm that microwaves can promote deoxygenation of GO at relatively low temperatures. Raman spectra and TGA measurements indicate that the defect level of GO significantly decreases during the isothermal solid‐state MW‐reduction process at low temperatures, corresponding to an efficient recovery of the fine graphene lattice structure. Based on both deoxygenation and defect‐level reduction, the resurgence of interconnected graphene‐like domains contributes to a low sheet resistance (～7.9×10⁴ Ω per square) of the MW‐reduced GO on SiO₂‐coated Si substrates with an optical transparency of 92.7 % at ～547 nm after MW reduction, indicating the ultrahigh efficiency of MW in GO reduction. Moreover, the low‐temperature solid‐state MW reduction is also applied in preparing flexible transparent conductive coatings on polydimethylsiloxane (PDMS) substrates. UV/Vis measurements indicate that the transparency of the thus‐prepared MW‐reduced GO coatings on PDMS substrates ranges from 34 to 96 %. Correspondingly, the sheet resistance of the coating ranges from 10⁵ to 10⁹ Ω per square, indicating that MW reduction of GO is promising for the convenient low‐temperature preparation of transparent conductors on flexible polymeric substrates.     

Synthesis of polydopamine‐coated graphene–polymer nanocomposites via RAFT polymerization

Graphene‐polymer nanocomposites have significant potential in many applications such as photovoltaic devices, fuel cells, and sensors. Functionalization of graphene is an essential step in the synthesis of uniformly distributed graphene‐polymer nanocomposites, but often results in structural defects in the graphitic sp² carbon framework. To address this issue, we synthesized graphene oxide (GO) by oxidative exfoliation of graphite and then reduced it into graphene via self‐polymerization of dopamine (DA). The simultaneous reduction of GO into graphene, and polymerization and coating of polydopamine (PDA) on the reduced graphene oxide (RGO) surface were confirmed with XRD, UV–Vis, XPS, Raman, TGA, and FTIR. The degree of reduction of GO increased with increasing DA/GO ratio from 1/4 to 4/1 and/or with increasing temperature from room temperature to 60 °C. A RAFT agent, 2‐(dodecylthiocarbonothioylthio)?2‐methylpropionic acid, was linked onto the surface of the PDA/RGO, with a higher equivalence of RAFT agent in the reaction leading to a higher concentration of RAFT sites on the surface. Graphene‐poly(methyl methacrylate), graphene‐poly(tert‐butyl acrylate), and graphene‐poly(N‐isopropylacrylamide) nanocomposites were synthesized via RAFT polymerization, showing their characteristic solubility in several different solvents. This novel synthetic route was found facile and can be readily used for the rational design of graphene‐polymer nanocomposites, promoting their applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3941–3949     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Highly Efficient One‐Pot Three Component Synthesis of 2H‐Indazoles by Consecutive Condensation,C–N and N–N Bond Formations Using Cu/Aminoclay/Reduced Graphene Oxide Nanohybrid

A simple and straightforward one‐pot three‐component synthesis of 2H‐indazoles through copper‐catalyzed consecutive condensation, C–N and N–N bond formations of easily accessible starting materials under ligand‐free conditions is described. In this protocol, treatment of substituted 2‐bromobenzaldehydes, structurally diverse amines, and [bmim]N₃ in the presence of Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as an efficient heterogeneous catalyst affords the corresponding 2H‐indazoles in good to excellent yields. The influence of effective parameters on the efficient progress of the reaction was studied. The Cu/AC/r‐GO nanohybrid is a stable and inexpensive catalyst that could be simply prepared, recovered, and reused for several reaction runs with no significant decrease in its reactivity.     

Boron‐Functionalized Graphene Oxide‐Organic Frameworks for Highly Efficient CO2 Capture

The capture and storage of CO₂ have been suggested as an effective strategy to reduce the global emissions of greenhouse gases. Hence, in recent years, many studies have been carried out to develop highly efficient materials for capturing CO₂. Until today, different types of porous materials, such as zeolites, porous carbons, N/B‐doped porous carbons or metal‐organic frameworks (MOFs), have been studied for CO₂ capture. Herein, the CO₂ capture performance of new hybrid materials, graphene‐organic frameworks (GOFs) is described. The GOFs were synthesized under mild conditions through a solvothermal process using graphene oxide (GO) as a starting material and benzene 1,4‐diboronic acid as an organic linker. Interestingly, the obtained GOF shows a high surface area (506 m² g⁻¹) which is around 11 times higher than that of GO (46 m² g⁻¹), indicating that the organic modification on the GO surface is an effective way of preparing a porous structure using GO. Our synthetic approach is quite simple, facile, and fast, compared with many other approaches reported previously. The synthesized GOF exhibits a very large CO₂ capacity of 4.95 mmol g⁻¹ at 298 K (1 bar), which is higher those of other porous materials or carbon‐based materials, along with an excellent CO₂/N₂ selectivity of 48.8.     

Thermoresponsive graphene oxide‐PNIPAM nanocomposites with controllable grafting polymer chains via moderate in situ SET–LRP

In this study, we report a mild and efficient strategy for growing thermosensitive polymers directly from the surface of exfoliated graphene oxide (GO). Exfoliated GO sheets were sequentially subject to the epoxide ring‐opening reaction with tris(hydroxymethyl) aminomethane (TRIS) to increase the amount of reactive sites, the esterification with 2‐bromo‐2‐methylpropionyl bromide to introduce the Br‐containing initiating groups, and the surface‐initiated single electron transfer–living radical polymerization of N‐isopropylacrylamide (NIPAM) to tune the molecular weights of grafted polymers. All these reactions were performed at ambient temperature without losing any other oxygen‐containing functionality on GO. The resulting TRIS‐GO‐PNIPAM nanocomposites still maintain the separated single layers in dispersion, and the dispersibilities in organic solvents are significantly improved. Meanwhile, the aqueous dispersion of TRIS‐GO‐PNIPAM shows reversible temperature switching self‐assembly and disassembly behavior at about 40°C. Such smart graphene‐based hybrid materials are promising for applications in nanoelectronics, sensors, and microfluidic switches. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal‐Free,Initiator‐Free Graphene Oxide‐Catalyzed Trifluoromethylation of Arenes

The direct C−H trifluoromethylation of arenes catalyzed by graphene oxide (GO) under safe conditions is described. This strategy is metal‐free, initiator‐free, safe, and scalable. It employs a readily available CF₃ source and the reaction can be easily controlled to obtain a mono‐trifluorinated product. This method opens a new avenue for GO‐catalyzed chemistry.     

Graphene Oxide Membranes with Heterogeneous Nanodomains for Efficient CO2 Separations

Achieving high membrane performance in terms of gas permeance and carbon dioxide selectivity is an important target in carbon capture. Aiming to manipulate the channel affinity towards CO₂ to implement efficient separations, gas separation membranes containing CO₂‐philic and non‐CO₂‐philic nanodomains in the interlayer channels of graphene oxide (GO) were formed by intercalating poly(ethylene glycol) diamines (PEGDA). PEGDA reacts with epoxy groups on the GO surface, constructing CO₂‐philic nanodomains and rendering a high sorption capacity, whereas unreacted GO surfaces give non‐CO₂‐philic nanodomains, rendering low‐friction diffusion. Owing to the orderly stacking of nanochannels through cross‐linking and the heterogeneous nanodomains with moderate CO₂ affinity, a GO‐PEGDA500 membrane exhibits a high CO₂ permeance of 175.5 GPU and a CO₂/CH₄ selectivity of 69.5, which is the highest performance reported for dry‐state GO‐stacking membranes.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.