Enhancement of Nanoclay Dispersion and Exfoliation in Epoxy Using Aminic Hardener Treated Clay

Exfoliation and dispersion of nanoclays in epoxy matrices plays an important role in achieving better physical and mechanical properties of resultant nanocomposites. In this article, modification of clay with an aminic hardener for the increment of dispersion and exfoliation into the epoxy matrix has been investigated. In the solvent media, a slurry of hydrophilic Na-Montmorrilonite was mixed and treated with isophoronediamine (IPDA). The nanocomposites containing epoxy and IPDA-modified clay were produced through a recently developed “slurry compounding” method. Dispersion and exfoliation of the modified clay and the microstructure of the resultant nanocomposite were studied by optical microscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier-transform infrared (FTIR) spectroscopy. The samples were then compared with the high shear mixed and sonicated nanocomposites containing commonly used quaternary ammonium modified clays. The comparison showed that dispersion and exfoliation of hardener-modified organoclays in epoxy have been improved due to the treatment of clay and the compounding method.     

Effect of the type of alkylammonium ion clay modifier on the structure and thermal/mechanical properties of glassy and rubbery epoxy-clay nanocomposites

Glassy and rubbery epoxy-clay nanocomposites were synthesized by using various montmorillonite organoclays in order to investigate and compare the effect of the type of alkylammonium ion clay modifier on the structure and properties of the nanocomposites. The organoclays studied were the Nanomer I.28E and I.30E and the Cloisite C10A, C15A and C20A. The functionality (acidity), size and shape of backbone chain, hydrophobicity and polarity were the varying parameters of the organic modifiers that were correlated to the ability of the organoclays to form highly intercalated or exfoliated nanocomposites and to the changes observed in the mechanical (tensile measurements), thermo-mechanical (DMA) and thermal (TGA) properties of the epoxy nanocomposites. The primary alkylammonium ion modifiers with reactive/acidic hydrogen atoms, compared to the quaternary octadecyl, dihydrogenated tallow and benzyl-substituted hydrogenated tallow ammonium ions, were the most effective for the formation of exfoliated clay glassy and rubbery epoxy nanocomposites which exhibited improved properties compared to the pristine epoxy polymers.     

Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends

Morphology, thermal and rheological properties of polymer‐organoclay composites prepared by melt‐blending of polystyrene (PS), poly(methyl methacrylate) (PMMA), and PS/PMMA blends with Cloisite® organoclays were examined by transmission electron microscopy, small‐angle X‐ray scattering, secondary ion mass spectroscopy, differential scanning calorimetry, and rheological techniques. Organoclay particles were finely dispersed and predominantly delaminated in PMMA‐clay composites, whereas organoclays formed micrometer‐sized aggregates in PS‐clay composites. In PS/PMMA blends, the majority of clay particles was concentrated in the PMMA phase and in the interfacial region between PS and PMMA. Although incompatible PS/PMMA blends remained phase‐separated after being melt‐blended with organoclays, the addition of organoclays resulted in a drastic reduction in the average microdomain sizes (from 1–1.5 μm to ca. 300–500 nm), indicating that organoclays partially compatibilized the immiscible PS/PMMA blends. The effect of surfactant (di‐methyl di‐octadecyl‐ammonia chloride), used in the preparation of organoclays, on the PS/PMMA miscibility was also investigated. The free surfactant was more compatible with PMMA than with PS; the surfactant was concentrated in PMMA and in the interfacial region of the blends. The microdomain size reduction resulting from the addition of organoclays was definitely more significant than that caused by adding the same amount of free surfactant without clay. The effect of organoclays on the rheological properties was insignificant in all tested systems, suggesting weak interactions between the clay particles and the polymer matrix. In the PS system, PMMA, and organoclay the extent of clay exfoliation and the resultant properties are controlled by the compatibility between the polymer matrix and the surfactant rather than by interactions between the polymer and the clay surface. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 44–54, 2003     

Thermal behaviour of compatibilised polypropylene nanocomposite: Effect of processing conditions

The thermal properties and fire behaviour of polypropylene (PP) nanocomposites were investigated using differential scanning calorimetry, dynamic-mechanical analysis, thermogravimetric analysis and glow wire test. In order to study the morphological structure of the materials obtained, TEM and XRD analyses were also carried out. The nanocomposites were prepared using the melt intercalation technique in a co-rotating intermeshing twin screw extruder. Particular attention was given to studying the influence of different processing conditions (barrel temperature profile and screw rate) and compositions of PP-nanoclay blends (clay content, use of compatibiliser) on the thermal properties of the nanocomposites.The results show that all the properties analysed were strongly influenced by the nanocomposite composition; instead, the processing conditions greatly affect only the dynamic-mechanical properties. DSC curves show that the crystallinity is deeply influenced by the presence of the clay in the matrix, owing to the fact that the filler acts as nucleating agent. DMA curves show that materials processed at low temperature profile and high shear stress, i.e. when a good clay dispersion is achieved, are characterised by an enhanced modulus, thus indicating that the incorporation of clay into the PP matrix remarkably enhances its stiffness and has good reinforcing effects. TGA traces in oxidizing atmosphere show a drastic shift of the weight loss curve towards higher temperature and no variation of the onset temperature (i.e. the temperature at which degradation begins). The TGA analyses in inert atmosphere show instead marked increase of this parameter (about 200 °C) and no shift of weight loss curves. Glow wire results highlight that polymer nanocomposites are characterised by enhanced fire behaviour.     

Effects of zinc-based flame retardants on the degradation behaviour of an aerospace epoxy matrix

Flame behaviour is a fundamental requirement for advanced aerospace composites. In this work, a commercial, low-viscosity epoxy system, typically used in liquid infusion composite processes, and its mixtures with three different zinc-based flame retardants (ZB, ZS, ZHS) at different weight percentages has been investigated by cone calorimetry and thermogravimetric analysis.Cone calorimetry has been performed to verify the flame retardancy effects induced by each filler composition. Nevertheless manufacturability issues require the evaluation of the rheological changes induced by filler on the unloaded matrix system. Rheological tests have been, therefore, performed to identify the maximum concentration of filler. Based on these results thermogravimetric tests have been performed to investigate thermal degradation kinetics of selected systems. The feasibility of Kissinger and Flynn-Wall-Ozawa method for the determination of characteristic degradation kinetics parameters has been evaluated and results were analysed. A simplified decomposition model was assumed to analyse epoxy degradation behaviour; it was found that this model gives appreciable matching with experimental TGA curve trend for neat epoxy whereas for the filled compounds additional stages were assume to occur.     

Development and thermo‐mechanical behavior of nanocomposite epoxy adhesives

Two kinds of organo‐modified (OM) clays were dispersed in an epoxy resin for the preparation of nanocomposite adhesives at various filler amounts. XRD tests evidenced the formation of intercalated structures, increasing the intercalation degree with the clay hydrophilicity. The original transparency of the samples was retained up to a filler content of 3 wt%, and then decreased due to filler agglomeration. The glass transition temperature of nanocomposites filled with the more hydrophilic clay (30B) raised up to a filler content of 3 wt% and then decreased, probably because of the concurrent and contrasting effects of the physical chain blocking and reduction of the cross‐linking degree. Also elastic modulus, stress at break, and fracture toughness were sensibly improved by nanoclay addition up to filler loadings of 0.5–1 wt%. For higher concentrations the positive contribution of clay nanoplatelets was counterbalanced by the presence of agglomerated tactoids in the matrix. Mechanical tests on single‐lap composite (epoxy/glass) bonded joints evidenced an enhancement of the shear strength by about 25% for an optimal filler content of 1 wt%. Therefore, it was concluded that the addition of a proper amount of OM clay to epoxy adhesives could represent an effective way to improve the shear resistance of adhesively bonded composite structures. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence concentration of modifying agent on properties of natural rubber/organoclay nanocomposites

Sodium-montmorillonite (Na-MMT) nanoclay was modified with different concentrations of octadecylamine organic modifying agent at 0.5, 1.0 and 1.5 times the CEC of Na-MMT. Influence of concentration of modifying agent on properties of the organoclays and natural rubber/organoclay nanocomposites was investigated. It was found that the optimum concentration of modifying agent was 1.5 times the CEC of Na-MMT. That is, at this concentration, larger d-spacing of organoclay particles and higher degree of clay dispersion in natural rubber matrix were observed. Larger interlayer d-spacing also caused enhancement of the mechanical properties of the NR/organoclay nanocomposites. Additionally, the NR/organoclay nanocomposites with higher concentration of modifying agent exhibited faster curing reaction with higher crosslink density. Furthermore, the organoclays with larger d-spacing and higher degree of dispersion in the natural rubber matrix exhibited enhancement of the mechanical and dynamic properties and thermal stability of natural rubber/organoclay nanocomposites.     

Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites

The effect of the addition of two different organoclays as a third component in polymer-modified asphalts has been investigated. Ternary mixtures were prepared by adding clay and poly(ethylene-co-vinyl acetate) to the asphalt, either separately, or in the form of a premixed master batch. The performed characterizations allowed the determination of how the two methods of mixing influence the interactions between asphalt and polymer and therefore the final rheological properties. In particular, it was shown that the clay had a compatibilizing effect on asphalt and polymer and that a high compatibility between clay and polymer led to a better dispersion of the polymer in the asphalt, thus influencing the final rheological properties of the studied systems.     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

Transport properties of graphite/epoxy composites: Thermal, permeability and dielectric characterization

In this study nanocomposites were prepared by dispersing three different grades of graphite particles, expanded graphite, commercial graphene nanoplatelets and natural graphite, in a commercial epoxy matrix. Dielectric properties, thermal conductivity and permeability to oxygen of the composites were studied and compared to those of the unfilled epoxy matrix. An increase of all properties is obtained using expanded graphite, suggesting the presence of a good dispersion of the filler in the matrix and a strong polar interactions of the filler with the matrix, attributed to the partially oxidised surfaces of the expanded graphite. All the measured transport properties were fitted with simple mathematical models obtaining good agreement between the experimental results and theoretical predictions. The model parameters were related to the aspect ratio of the filler, defined as the ratio between the in-plane average dimension and the thickness of the reinforcement. An aspect ratio between 1250 and 1550 indicates that graphite thin platelets (or graphene stacks), characterized by a thickness of the order of a few tens of nanometers, were dispersed in the epoxy matrix.     

Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials

In this study, a series of comparative studies for the effect of intercalating agent on the physical properties of the epoxy resin-clay based nanocomposite materials were performed. First, the quaternary alkylphosphonium and alkylammonium salt were both used as the intercalating agents separately for the preparation of organophilic clay through the cationic exchange reactions with Na⁺-montmorillonite clay. Subsequently, the organophilic clay was blent into the epoxy resin through in-situ thermal ring-opening polymerizations to prepare a series of polymer-clay nanocomposite (PCN) materials. The as-synthesized PCN materials were subsequently characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (WXRD), and transmission electron microscopy (TEM).It should be noted that the quaternary alkylphosphonium salt (Φ₃P⁺-C₁₂)-modified clay was found to show better dispersion capability than that of quaternary alkylammonium salt (Me₃N⁺-C₁₆)-modified clay existed in the polymer matrix based on the studies of WXRD and TEM. The better dispersion of (Φ₃P⁺-C₁₂)-modified clay in epoxy resin was found to lead more effectively enhanced physical property such as corrosion protection, gas barrier, mechanical strength, thermal stability, and flame retardant properties of polymers than that of (Me₃N⁺-C₁₆)-modified clay, in the form of coating and membrane, based on the measurements of a series of electrochemical corrosion parameters, gas permeability analysis (GPA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and limiting oxygen index (LOI), respectively. Effect of material composition on the physical properties of as-prepared materials was also investigated.     

Preparation of highly exfoliated epoxy/clay nanocomposites by "slurry compounding": process and mechanisms

Epoxy/clay nanocomposites with a high degree of exfoliation were achieved using a so-called "slurry-compounding" process with which the dispersed state of clay in water can be successfully transferred to an epoxy matrix. In this process sodium montmorillonite was first exfoliated and suspended in water. This suspension was further treated with acetone to form a clay-acetone slurry followed by chemical modification using silane. The modified slurry was then mixed extensively with epoxy to form epoxy/nanoclay composites. It has been shown that the morphologies of clay before and after curing are quite similar and the exfoliation process is termed "slurry compounding". Furthermore, the amount of organic modifier used is only 5 wt % of clay, in contrast to conventional organoclays which normally contain at least 25-45 wt % of organic surfactant. The resulting epoxy/nanoclay composites exhibit a high degree of clay exfoliation and a better thermal mechanical property.     

Layered silicate/epoxy nanocomposites: synthesis,characterization and properties

Novel epoxy‐clay nanocomposites have been prepared by epoxy and organoclays. Polyoxypropylene triamine (Jeffamine T‐403), primary polyethertriamine (Jeffamine T‐5000) and three types of polyoxypropylene diamine (Jeffamine D‐230, D‐400, D‐2000) with different molecular weight were used to treat Na‐montmorillonite (MMT) to form organoclays. The preparation involves the ion exchange of Na⁺ in MMT with the organic ammonium group in Jeffamine compounds. X‐ray diffraction (XRD) confirms the intercalation of these organic moieties to form Jeffamine‐MMT intercalates. Jeffamine D‐230 was used as a swelling agent for the organoclay and curing agent. It was established that the d₀₀₁ spacing of MMT in epoxy‐clay nanocomposites depends on the silicate modification. Although XRD data did not show any apparent order of the clay layers in the T5000‐MMT/epoxy nanocomposite, transmission electron microscopy (TEM) revealed the presence of multiplets with an average size of 5 nm and the average spacing between multiplets falls in the range of 100 Å. The multiplets clustered into mineral rich domains with an average size of 140 nm. Scanning electron microscopy (SEM) reveals the absence of mineral aggregate. Nanocomposites exhibit significant increase in thermal stability in comparison to the original epoxy. The effect of the organoclay on the hardness and toughness properties of crosslinked polymer matrix was studied. The hardness of all the resulting materials was enhanced with the inclusion of organoclay. A three‐fold increase in the energy required for breaking the test specimen was found for T5000‐MMT/epoxy containing 7 wt% of organoclay as compared to that of pure epoxy. Copyright © 2004 John Wiley & Sons, Ltd.     

Enhanced thermal stability and structural characteristics of different MMT-Clay/epoxy-nanocomposite materials

Epoxy-clay nanocomposites, HDTMA-BDGE, HDTMA-BPDG, HDTMA-BBDG, HDTMA-TGDDM and HDTPP-BDGE were synthesized using hexadecylammonium clay and hexadecylphosphonium clay, respectively. The Montmorillonite (MMT) clay was modified with quaternary ammonium salt and with triphenylphosphonium salt which was intercalated into the interlayer region of MMT-Clay. The epoxy-clay systems were cured by using diaminodiphenylsulphone as a curing agent. The X-ray diffraction patterns obtained for the systems confirmed the nanodispersion of MMT-Clay in the epoxy networks. The ammonium clay-modified systems displayed appreciable mechanical and glass-transition temperature properties while, the phosphonium clay-modified system exhibited highest thermal resistance properties compared with unmodified epoxy systems. The T_g decrease observed in all the clay-modified epoxy systems, may be compromised with their advantage of requiring the filler content very low (5wt%), when compared to the conventional epoxy systems whose filler quantity is normally required from 25 to 30 wt%.     

Nanostructure vs. microstructure: Morphological and thermomechanical characterization of poly(l-lactic acid)/layered silicate hybrids

Nano- and micro-composites of poly(l-lactic acid) (PLLA) with various loadings of natural and hexadecylamine-modified montmorillonite were prepared by the solvent casting method to study the effect of nanostructure on the thermomechanical properties of the hybrid materials. The changes on structure and surface of montmorillonite, induced by the ion-exchange modification process, were characterized by X-ray diffraction (XRD) analysis and zeta-potential determination, while the morphology of the hybrids and the dispersion of the clay into the polymer matrix were examined by XRD, transmission electron microscopy and atomic force microscopy. The results showed that, although at low clay content exfoliation dominates, for filler loadings greater than 5 wt% both exfoliation and intercalation of the clay filler are observed. Thermal degradation studies of the materials produced using thermogravimetry revealed the introduction of a small amount of organo-modified silicate significantly improves their thermal stability. Differential scanning calorimetry showed the thermal behavior of the polymer matrix strongly depends on the nature and content of the silicate filler. Scanning electron microscopy of the deformed surfaces affirmed a different deformation process mechanism between the two types of composites.     

Structure and dielectric properties of a thermoplastic blend containing dispersed metal

In the present work broadband dielectric relaxation spectroscopy measurements were employed to investigate the dielectric properties of polymer composites. A polyethylene/polyoxymethylene (PE/POM) thermoplastic blend was used as a matrix, while the inclusions were iron (Fe) particles. For comparison, the two pure polymers- PE and POM- were used as a matrix, too. In the PE/POM-Fe composites, the polymer matrix is two-phase and the filler particles are localized only in the POM phase, resulting in an ordered distribution of the dispersed filler particles within the blend. In PE-Fe and POM-Fe composites, the filler spatial distribution is random. The behaviour of all the composites studied is described in terms of the percolation theory. The PE/POM-Fe composites, based on the PE/POM blend, demonstrate different electrical behaviour compared to that of POM-Fe and PE-Fe systems. The percolation threshold value of the PE/POM-Fe composites was found much lower than that of the other two systems. The results were related to the microstructure of the composites. A schematic model for the morphology of the composites studied has been proposed. This model explains the peculiar behaviour of the PE/POM-Fe composites by taking into account the ordered distribution of the filler particles in a binary polymer matrix. Optical microscopy photographs confirm this model.     

Degradation of poly(ethylene terephthalate)/clay nanocomposites during melt extrusion: Effect of clay catalysis and chain extension

Organoclays with various contents of hydroxyl groups and absorbed ammonium were prepared and compounded with poly(ethylene terephthalate) (PET), forming PET/clay nanocomposites via melt extrusion. Dilute solution viscosity techniques were used to evaluate the level of molecular weight of PET/clay nanocomposites. Actually, a significant reduction in PET molecular weight was observed. The level of degradation depended on both the clay structure and surfactant chemistry in organoclays. The composites, based on clay with larger amount of hydroxyl groups on the edge of clay platelets, experienced much more degradation, because the hydroxyl groups acted as Brønsted acidic sites to accelerate polymer degradation. Furthermore, organoclays with different amounts of absorbed ammonium led to different extents of polymer degradation, depending upon the acidic sites produced by the Hofmann elimination reaction of ammonium. In addition, the composite with better clay dispersion state, which was considered as an increasing amount of clay surface and ammonium exposed to the PET matrix, experienced polymer degradation more seriously. To compensate for polymer degradation during melt extrusion, pyromellitic dianhydride (PMDA) was used as chain extender to increase the intrinsic viscosity of polymer matrix; more importantly, the addition of PMDA had little influence on the clay exfoliation state in PET/clay nanocomposites.     

Preparation of highly exfoliated epoxy/clay nanocomposites by clay grafted with liquid crystalline epoxy

Epoxy/clay nanocomposites with a high degree of exfoliation were achieved by intercalating liquid crystalline epoxy into clay intragallery as well as using a so-called ‘solution compounding’ process. In this process, clay modified was first treated with trichloromethane to form organoclay-trichloromethane suspension followed by liquid crystalline epoxy modification. The liquid crystalline epoxy grafted clay was then mixed extensively with epoxy to form epoxy/nanoclay composites. The mechanism of exfoliation was explored by monitoring the change of morphology of organoclay during each stage of processing with X-ray diffraction (XRD). The liquid crystalline epoxy grafted clay synthesised was characterised by fourier transform infrared spectroscopy (FT-IR) and polarising optical microscopy (POM). The clay platelets uniformly dispersed and highly exfoliated in the whole epoxy matrix were observed using transmission electron microscopy (TEM) and FT-IR imaging system. The epoxy nanocomposites were fabricated by incorporating different liquid crystalline epoxy grafted clay loading. The results revealed that the incorporation of liquid crystalline epoxy grafted clay resulted in a significant improvement in glass transition temperature (Tg) derived from dynamic mechanical analysis (DMA) and thermal stability measured by thermogravimetric analysis (TGA).     

Clay dispersibility and mechanical property of the epoxy/clay nanocomposites prepared by different treatment methods

The bisphenol‐A type epoxy resin was combined with layered clays. Three types of epoxy/clay nanocomposites were prepared by different clay pretreatment methods, that is, the slurry (clay swelling with polar solvent), organo, and solubilization (organoclay swelling with polar solvent) methods. The organo and solubilization systems showed good dispersibility. The basal spacing of the layered clays in the obtained nanocomposites was evaluated by XRD and TEM observations. The basal spacing of the nanoclay in the solubilization system drastically increased. The mechanical properties were improved with the increase in the clay dispersion. A high modulus and fracture toughness were obtained by improvement of the clay dispersion into the matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1753–1761, 2009     

Thermal decomposition of various alkyl onium organoclays: Effect on polyethylene terephthalate nanocomposites' properties

The thermal stability of organically modified layered silicates is determinant for processing polymer nanocomposites and is believed to play a key role on their properties. In this work, alkyl phosphonium, alkyl pyridinium and dialkyl imidazolium surfactants were used as intercalating agents for the preparation of highly thermally stable organophilic montmorillonites. The thermal decomposition of the surfactants and of their organoclays was studied by combined thermogravimetric analysis (TGA) and mass spectroscopy (MS), which allowed the identification of specific volatile compounds issued from the degradation. In order to investigate the influence of the thermal decomposition of the intercalating agent during processing, the various organoclays were incorporated in a polyethylene terephthalate (PET) matrix. The color of the nanocomposites was significantly affected by the thermal decomposition of the intercalating agent. In the case of the alkyl pyridinium modified clay, the degradation of the intercalating agent during processing was found to alter the clay dispersion. Finally, the crystallization was analyzed by differential scanning calorimetric (DSC) analysis and polarized optical microscopy (POM): it was demonstrated that the kinetics of nucleation and growth is not only affected by the dispersion state of the clay, but also depends on the clay/polymer interface properties, and therefore on the nature of the intercalating agent.