1,3-dipolar cycloaddition on solid supports: nitrone approach towards isoxazolidines and isoxazolines and subsequent transformations

1,3-dipolar cycloaddition reactions of nitrones with alkenes and alkynes are well-studied reactions in solution-phase organic chemistry. However, the number of studies concerned with their application in solid-phase organic synthesis is rather low compared to other 1,3-dipoles, e.g. azides or nitrile oxides. This tutorial review aims to summarise the main approaches towards the application of nitrones in 1,3-dipolar cycloaddition reactions on solid supports in addition to subsequent transformations with polymer-bound isoxazolidines and reactions using polymer-bound catalysts.     

Formal and standard ruthenium-catalyzed [2 + 2 + 2] cycloaddition reaction of 1,6-diynes to alkenes: a mechanistic density functional study

"Formal" and standard Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes 1 to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. The neutral Ru(II) catalyst was formed in situ by mixing equimolecular amounts of [Cp*Ru(CH3CN)3]PF6 and Et4NCl. Two isomeric bicyclic 1,3-cyclohexadienes 3 and 8 were obtained depending on the cyclic or acyclic nature of the alkene partner. Mechanistic studies on the Ru catalytic cycle revealed a clue for this difference: (a) when acyclic alkenes were used, linear coupling of 1,6-diynes with alkenes was observed giving 1,3,5-trienes 6 as the only initial reaction products, which after a thermal disrotatory 6e-pi electrocyclization led to the final 1,3-cyclohexadienes 3 as probed by NMR studies. This cascade process behaved as a formal Ru-catalyzed [2 + 2 + 2] cycloaddition. (b) With cyclic alkenes, the standard Ru-catalyzed [2 + 2 + 2] cycloaddition occurred, giving the bicyclic 1,3-cyclohexadienes 8 as reaction products. A complete catalytic cycle for the formal and standard Ru-catalyzed [2 + 2 + 2] cycloaddition of acetylene and cyclic and acyclic alkenes with the Cp*RuCl fragment has been proposed and discussed based on DFT/B3LYP calculations. The most likely mechanism for these processes would involve the formation of ruthenacycloheptadiene intermediates XXIII or XXVII depending on the alkene nature. From these complexes, two alternatives could be envisioned: (a) a reductive elimination in the case of cyclic alkenes 7 and (b) a beta-elimination followed by reductive elimination to give 1,3,5-hexatrienes 6 in the case of acyclic alkenes. Final 6e-pi electrocyclization of 6 gave 1,3-cyclohexadienes 3.     

Binap-gold(I) versus Binap-silver trifluoroacetate complexes as catalysts in 1,3-dipolar cycloadditions of azomethine ylides

The 1,3-dipolar cycloaddition between azomethine ylides and alkenes is efficiently catalysed by [{(S(a))-Binap-Au(tfa)}(2)] (Binap=2,2'-bis(diphenylphosphino)-1,1'-binaphthyl; tfa=trifluoroacetyl). Maleimides, 1,2-bis(phenylsulfonyl)ethylene, chalcone and nitrostyrene were suitable dipolarophiles even when using sterically hindered 1,3-dipole precursors. The results obtained in these transformations improve the analogous ones obtained in the same reactions catalysed by [Binap-Ag(tfa)]. In addition, computational studies have also been carried out to demonstrate both the high enantioselectivity exhibited by the chiral gold(I) complex, and the non-linear effect observed in this transformation.     

铱催化环加成反应的研究进展

过渡金属催化环加成反应是合成单环及多环化合物的重要方法,也是有机化学的研究热点之一.综述了近年来铱催化环加成反应的研究进展,主要包括了[2+2+1],[2+2+2],[4+2],1,3-偶极环加成反应等,及少量关于[3+2+2],[3+2],[5+1]环加成反应的报道,并讨论了部分铱催化环加成反应机理.     

Mechanism, regioselectivity, and the kinetics of phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes

With the aid of computations and experiments, the detailed mechanism of the phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes has been investigated. It was found that this reaction includes four consecutive processes: 1) In situ generation of a 1,3-dipole from allenoate and phosphine, 2) stepwise [3+2] cycloaddition, 3) a water-catalyzed [1,2]-hydrogen shift, and 4) elimination of the phosphine catalyst. In situ generation of the 1,3-dipole is key to all nucleophilic phosphine-catalyzed reactions. Through a kinetic study we have shown that the generation of the 1,3-dipole is the rate-determining step of the phosphine-catalyzed [3+2] cycloaddition reaction of allenoates and electron-deficient alkenes. DFT calculations and FMO analysis revealed that an electron-withdrawing group is required in the allene to ensure the generation of the 1,3-dipole kinetically and thermodynamically. Atoms-in-molecules (AIM) theory was used to analyze the stability of the 1,3-dipole. The regioselectivity of the [3+2] cycloaddition can be rationalized very well by FMO and AIM theories. Isotopic labeling experiments combined with DFT calculations showed that the commonly accepted intramolecular [1,2]-proton shift should be corrected to a water-catalyzed [1,2]-proton shift. Additional isotopic labeling experiments of the hetero-[3+2] cycloaddition of allenoates and electron-deficient imines further support this finding. This investigation has also been extended to the study of the phosphine-catalyzed [3+2] cycloaddition reaction of alkynoates as the three-carbon synthon, which showed that the generation of the 1,3-dipole in this reaction also occurs by a water-catalyzed process.     

A DFT study on the 1,3-dipolar cycloaddition reactions of C-(hetaryl) nitrones with methyl acrylate and vinyl acetate

The 1,3-dipolar cycloaddition of C-(hetaryl) nitrones with electron-poor and electron-rich alkenes is rationalized. The energetics of the cycloaddition reactions have been investigated through molecular orbital calculations at the B3LYP/6-31-G(d) theory level. By studying different reaction channels and reagent conformations the regio- and stereochemical preferences of the reaction are discussed.     

Click chemistry by microcontact printing on self-assembled monolayers: a structure-reactivity study by fluorescence microscopy

Microcontact printing (μCP) has developed into a powerful tool to functionalize surfaces with patterned molecular monolayers. μCP can also be used to induce a chemical reaction between a molecular ink and a self-assembled monolayer (SAM) in the nanoscale confinement between stamp and substrate. In this paper, we investigate the Huisgen 1,3-dipolar cycloaddition, the Diels-Alder cycloaddition and the thiol-ene/yne reaction induced by μCP. A range of fluorescent alkyne inks were printed on azide SAMs and fluorescence microscopy was used to monitor the extent of the 1,3-dipolar cycloaddition on a glass substrate. The rate of cycloaddition depends on the reactivity of the alkyne and on the presence of Cu(I). The cycloaddition is accelerated by Cu(I) but it also proceeds readily in the absence of Cu(I). In addition, a range of fluorescent diene inks were printed on alkene SAMs on glass. In this case, fluorescence microscopy was used to monitor the rate of the Diels-Alder cycloaddition as well as its retro-reaction. Finally, fluorescent thiol inks were printed on alkene SAMs on glass, and fluorescent alkenes and alkynes were printed on thiol SAMs. It is shown that reactions by μCP follow structure-reactivity relationships similar to solution reactions. Under optimized conditions all reactions lead to dense microarrays of addition products within minutes of printing time.     

A DFT study on the 1,3-dipolar cycloaddition reactions of C-(methoxycarbonyl)-N-methyl nitrone with methyl acrylate and vinyl acetate

In the 1,3-dipolar cycloaddition of glyoxylic nitrones with electron-poor and electron-rich alkenes, the configurational instability of the nitrone leads to parallel models when regio- and stereoselectivities are rationalized. The energetics of the cycloaddition reactions have been investigated through molecular orbital calculations at the B3LYP/6-31-G(d) theory level. By studying different reaction channels and reagent conformations, leading to a total of sixteen transition structures for each dipolarophile, the regio- and stereochemical preferences of the reaction are discussed.     

1,3-Dipolar cycloaddition reactions of 3-acylimino-1-methylbenzimidazolium betaines

3-Acylimino-1-methylbenzimidazolium betaines undergo 1,3-dipolar cycloaddition reactions with activated alkenes (methyl acrylate, acrylonitrile, and fumaronitrile) and methyl propiolate to produce 2-substituted 1-methylbenzimidazoles. The transformation involves the initial formation of a 1,3-dipolar cycloadduct followed by the N? N bond cleavage. The primary adducts can be isolated from the reaction with methyl acrylate and acrylonitrile.     

Phosphine-catalyzed [4 + 2] annulation and vinylogous addition reactions between 1,4-dien-3-ones and 1,1-dicyanoalkenes

Phosphine-catalyzed [4 + 2] annulation and vinylogous Michael addition reactions between 1,4-dien-3-ones and 1,1-dicyanoalkenes are presented. Under the catalysis of PBu(3) (20 mol %), 1,4-dien-3-ones like styryl ketones with 2-aryl 1,1-dicyanoalkenes as doubly activated alkenes readily undergo a formal [4 + 2] cycloaddition reaction, affording polysubstituted cyclohexanones in satisfactory yield and good diastereoselectivity; with the doubly activated alkenes bearing an acidic methyl or methylene at the 2-position, a vinylogous Michael addition of 1,4-dien-3-ones occurs under the same reaction conditions, giving a non-cyclized multifunctional adduct in good yield. These two phosphine-catalyzed transformations represent atom economical carbon-carbon bond forming reactions capable of rapid construction of molecular complexity. Based on experimental results, formation of the products has been mechanistically rationalized, and a phosphonium activation is proposed.     

Diastereoselective [3+2] Annulation of Aromatic/Vinylic Amides with Bicyclic Alkenes through Cobalt‐Catalyzed C−H Activation and Intramolecular Nucleophilic Addition

A highly diastereoselective method for the synthesis of dihydroepoxybenzofluorenone derivatives from aromatic/vinylic amides and bicyclic alkenes is described. This new transformation proceeds through cobalt‐catalyzed C?H activation and intramolecular nucleophilic addition to the amide functional group. Transition‐metal‐catalyzed C?H activation reactions of secondary amides with alkenes usually lead to [4+2] or [4+1] annulation; to the best of our knowledge, this is the first time that a [3+2] cycloaddition is described in this context. The reaction proceeds under mild conditions and tolerates a wide range of functional groups. Mechanistic studies imply that the C?H bond cleavage may be the rate‐limiting step.     

Phosphine gold(I)-catalyzed hydroamination of alkenes under thermal and microwave-assisted conditions

[reaction: see text] Phosphine gold(I) complexes catalyzed isomerization of terminal alkenes and hydroamination of unactivated alkenes under thermal and microwave-assisted conditions. This is the first example of the use of microwave radiation as a heat source for gold(I)-catalyzed organic reactions.     

3 + 2]-dipolar cycloaddition reactions of an N-heterocyclic carbene boryl azide

Thermal 1,3-dipolar cycloaddition reactions of 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene dihydridoboron azide occur smoothly with alkynes, nitriles, and alkenes bearing electron-withdrawing groups. New, stable NHC-boryl-substituted triazoles, tetrazoles, and triazolidines are formed in good to excellent yields.     

Theory of 1,3-dipolar cycloadditions: distortion/interaction and frontier molecular orbital models

Quantum chemical calculations of activation barriers and reaction energies for 1,3-dipolar cycloadditions by the high-accuracy CBS-QB3 method reveal previously unrecognized quantitative trends in activation barriers. The distortion/interaction model of reactivity explains why (1) there is a monotonic decrease of approximately 6 kcal/mol in the activation energy along the series oxides, imine, and ylide for the diazonium, nitrilium, and azomethine betaine classes of 1,3-dipoles; (2) nitrilium and azomethine betaines with the same trio of atoms have almost identical cycloaddition barrier heights; (3) barrier heights for the cycloadditions of a given 1,3-dipole with ethylene and acetylene have the same activation energies (mean absolute deviation of 0.6 kcal/mol) in spite of very different reaction thermodynamics (Delta DeltaH(rxn) range = 14-43 kcal/mol) and frontier molecular orbital (FMO) energy gaps. The energy to distort the 1,3-dipole and dipolarophile to the transition state geometry, rather than FMO interactions or reaction thermodynamics, controls reactivity for cycloadditions of 1,3-dipoles with alkenes or alkynes. A distortion/interaction energy analysis was also carried out on the transition states for the cycloadditions of diazonium dipoles with a set of substituted alkenes (CH2CHX, X = OMe, Me, CO 2Me, Cl, CN) and reveals that FMO interaction energies between the 1,3-dipole and the dipolarophile differentiate reactivity when transition state distortion energies are nearly constant.     

Intramolecular 1,3-dipolar ene reactions of nitrile oxides occur by stepwise 1,1-cycloaddition/retro-ene mechanisms

Density functional theory studies of intramolecular ene-like (or the so-called 1,3-dipolar ene) reactions between nitrile oxides and alkenes (Ishikawa, T.; Urano, J.; Ikeda, S.; Kobayashi, Y.; Saito, S. Angew. Chem., Int. Ed. 2002, 41, 1586) show that this reaction is a three-step process involving a stepwise carbenoid addition of nitrile oxide to form a bicyclic nitroso compound, followed by a retro-ene reaction of the nitrosocyclopropane intermediate. The competitive reactions, either the intramolecular (3+2) reactions between nitrile oxides and alkenes or the intermolecular dimerizations of nitrile oxides to form furoxans, can overwhelm the intramolecular 1,3-dipolar ene reactions when the tether joining the nitrile oxide and alkene is elongated or some substituents such as trimethylsilyl are absent.     

β-Silylacrylate as a Multipurpose Reagent in Organic Synthesis

Acrylates are well known electrophilic alkenes having multitude of applications in organic synthesis. They are very good acceptors in Michael addition reactions and are good enophile/dienophile/dipolarophile partners in cycloaddition reactions. Replacing the β-alkyl/aryl groups in acrylates by a silicon group would be interesting. In addition to the conventional reactions displayed by acrylates, β-silylacrylates (β-SAs) can show reactivity specifically related to the silicon group. Many conventional organic reactions such as hydrodimerization, organocatalytic asymmetric Michael additions, inter- and intra-molecular Diels–Alder reactions, and asymmetric 1,3-dipolar cycloadditions have been used to generate the complex chemical entities from β-SAs. Some of the reaction outcomes were vastly influenced by the silicon substituent. This review describes the practical synthesis β-SAs and their use as starting point in complex molecule generation including total synthesis of some natural products/bioactive molecules.     

Cobalt(I)-mediated preparation of polyborylated cyclohexadienes: scope, limitations, and mechanistic insight

A series of 1,3- and 1,4-diboryl-1,3-cyclohexadienes have been prepared by intermolecular CoCp-mediated [2+2+2] cocyclizations of alkynylboronic pinacolate esters with alkenes, followed by oxidative demetallation with iron(III) chloride. The effect of substitution at the borylated alkyne on chemo- and regioselectivities has been studied, suggesting steric control. The proper choice of substituents allowed the preparation of 1,3-diborylated cyclohexadienes in a highly selective manner. Alternatively, 1,4-diborylated cyclohexadienes could be prepared from diborylated diynes. The scope of this reaction has been examined and found to include electron-poor, electron-rich, linear, and cyclic alkenes. The diborylated cyclohexadienes were submitted to single or double Suzuki-Miyaura cross-coupling reactions with haloarenes to afford polyarylated systems. The mechanism of the title reaction, including the regioselectivity of the cycloaddition steps, has been analyzed by means of DFT computations.     

Cyclic (Amino)(aryl)carbenes (CAArCs) as Strong σ‐Donating and π‐Accepting Ligands for Transition Metals

Cyclic (amino)(aryl)carbenes (CAArCs) result from the replacement of the alkyl substituent of cyclic (alkyl)(amino) carbenes (CAACs) by an aryl group. This structural modification leads to enhanced electrophilicity of the carbene center with retention of the high nucleophilicity of CAACs, and therefore CAArCs feature a small singlet–triplet gap. The isoindolium precursors are readily prepared in good yields, and deprotonation at low temperature, in the presence of [RhCl(cod)]₂ and [(Me₂S)AuCl] lead to air‐stable rhodium and gold CAArC‐supported complexes, respectively. The rhodium complexes promote the [3+2] cycloaddition of diphenylcyclopropenone with ethyl phenylpropiolate, and induce the addition of 2‐vinylpyridine to alkenes by CH activation. The gold complexes allow for the catalytic three‐component preparation of 1,2‐dihydroquinolines from aniline and phenyl acetylene. These preliminary results illustrate the potential of CAArC ligands in transition‐metal catalysis.     

Catalytic enantioselective 1,3-dipolar cycloaddition reactions of cyclic nitrones: a simple approach for the formation of optically active isoquinoline derivatives

The first highly diastereo- and enantioselective catalytic 1, 3-dipolar cycloaddition reaction of cyclic nitrones activated by chiral Lewis acids with electron-rich alkenes has been developed. The nitrones, mainly 3,4-dihydroisoquinoline N-oxides, are activated by chiral 3,3'-aryl BINOL-AlMe complexes and undergo a regio-, diastereo-, and enantioselective 1,3-dipolar cycloaddition reaction with especially alkyl vinyl ethers, giving the exo diastereomer of the cycloaddition products in high yield, >90% de and up to 85% ee. The reaction has been investigated under various conditions, and it is demonstrated that the reaction is an attractive synthetic procedure for the introduction of a chiral center in the 1-position of the isoquinoline skeleton. The mechanism of the reaction is discussed on the basis of the assignment of the absolute configuration of the cycloaddition product and theoretical calculations.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.