Mechanistic studies on the reactions of PhS(-) or [MoS(4)](2)(-) with [M(4)(SPh)(10)](2)(-) (M = Fe or Co)

Kinetic studies, using stopped-flow spectrophotometry, on the reactions of [M(4)(SPh)(10)](2)(-) (M = Fe or Co) with PhS(-) to form [M(SPh)(4)](2)(-) are described, as are the reactions between [M(4)(SPh)(10)](2)(-) and [MoS(4)](2)(-) to form [S(2)MoS(2)Fe(SPh)(2)](2)(-) or [S(2)MoS(2)CoS(2)MoS(2)](2)(-). The kinetics of the reactions with PhS(-) are consistent with an initial associative substitution mechanism involving attack of PhS(-) at one of the tetrahedral M sites of [M(4)(SPh)(10)](2)(-) to form [M(4)(SPh)(11)](3)(-). Subsequent or concomitant cleavage of a micro-SPh ligand, at the same M, initiates a cascade of rapid reactions which result ultimately in the complete rupture of the cluster and formation of [M(SPh)(4)](2)(-). The kinetics of the reaction between [M(4)(SPh)(10)](2)(-) and [MoS(4)](2)(-) indicate an initial dissociative substitution mechanism at low concentrations of [MoS(4)](2)(-), in which rate-limiting dissociation of a terminal thiolate from [M(4)(SPh)(10)](2)(-) produces [M(4)(SPh)(9)](-) and the coordinatively unsaturated M site is rapidly attacked by a sulfido group of [MoS(4)](2)(-). It is proposed that subsequent chelation of the MoS(4) ligand results in cleavage of an M-micro-SPh bond, initiating a cascade of reactions which lead to the ultimate break-up of the cluster and formation of the products, [S(2)MoS(2)Fe(SPh)(2)](2)(-) or [S(2)MoS(2)CoS(2)MoS(2)](2)(-). With [Co(4)(SPh)(10)](2)(-), at higher concentrations of [MoS(4)](2)(-), a further substitution pathway is evident which exhibits a second order dependence on the concentration of [MoS(4)](2)(-). The mechanistic picture of cluster disruption which emerges from these studies rationalizes the "all or nothing" reactivity of [M(4)(SPh)(10)](2)(-).     

Single- and double-cubane clusters in the multiple oxidation states [VFe(3)S(4)](3+,2+,1+)

A new series of cubane-type [VFe(3)S(4)](z)() clusters (z = 1+, 2+, 3+) has been prepared as possible precursor species for clusters related to those present in vanadium-containing nitrogenase. Treatment of [(HBpz(3))VFe(3)S(4)Cl(3)](2)(-) (2, z = 2+), protected from further reaction at the vanadium site by the tris(pyrazolyl)hydroborate ligand, with ferrocenium ion affords the oxidized cluster [(HBpz(3))VFe(3)S(4)Cl(3)](1)(-) (3, z = 3+). Reaction of 2 with Et(3)P results in chloride substitution to give [(HBpz(3))VFe(3)S(4)(PEt(3))(3)](1+) (4, z = 2+). Reaction of 4 with cobaltocene reduced the cluster with formation of the edge-bridged double-cubane [(HBpz(3))(2)V(2)Fe(6)S(8)(PEt(3))(4)] (5, z = 1+, 1+), which with excess chloride underwent ligand substitution to afford [(HBpz(3))(2)V(2)Fe(6)S(8)Cl(4)](4)(-) (6, z = 1+, 1+). X-ray structures of (Me(4)N)[3], [4](PF(6)), 5, and (Et(4)N)(4)[6] x 2MeCN are described. Cluster 5 is isostructural with previously reported [(Cl(4)cat)(2)(Et(3)P)(2)Mo(2)Fe(6)S(8)(PEt(3))(4)] and contains two VFe(3)S(4) cubanes connected across edges by a Fe(2)S(2) rhomb in which the bridging Fe-S distances are shorter than intracubane Fe-S distances. M?ssbauer (2-5), magnetic (2-5), and EPR (2, 4) data are reported and demonstrate an S = 3/2 ground state for 2 and 4 and a diamagnetic ground state for 3. Analysis of (57)Fe isomer shifts based on an empirical correlation between shift and oxidation state and appropriate reference shifts results in two conclusions. (i) The oxidation 2 --> 3 + e(-) results in a change in electron density localized largely or completely on the Fe(3) subcluster and associated sulfur atoms. (ii) The most appropriate charge distributions are [V(3+)Fe(3+)Fe(2+)(2)S(4)](2+) (Fe(2.33+)) for 1, 2, and 4 and [V(3+)Fe(3+)(2)Fe(2+)S(4)](3+) (Fe(2.67+)) for 3 and [V(2)Fe(6)S(8)(SEt)(9)](3+). Conclusion i applies to every MFe(3)S(4) cubane-type cluster thus far examined in different redox states at parity of cluster ligation. The formalistic charge distributions are regarded as the best current approximations to electron distributions in these delocalized species. The isomer shifts require that iron atoms are mixed-valence in each cluster.     

Borohydride, azide, and chloride anions as terminal ligands on Fe/Mo/S clusters. Synthesis, structure and characterization of [(Cl4-cat)(PPr3) MoFe3S4(X)2]2(Bu4N)4 and [(Cl4-cat)(PPr3)MoFe3S4 (PPr3)(X)]2(Bu4N)2 (X = N3-, BH4-, Cl-) double-fused cubanes. NMR reactivity studies of [(Cl4-cat)(PPr3) MoFe3S4(BH4)2]2(Bu4N)4

Our explorations of the reactivity of Fe/Mo/S clusters of some relevance to the FeMoco nitrogenase have led to new double-fused cubane clusters with the Mo2Fe6S8 core as derivatives of the known (Cl4-cat)2Mo2Fe6S8(PPr3)6 (I) fused double cubane. The new clusters have been obtained by substitution reactions of the PPr3 ligands with Cl-, BH4-, and N3-. By careful control of the conditions of these reactions, the clusters [(Cl4-cat)(PPr3)MoFe3S4(BH4)2]2(Bu4N)4 (II), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(BH4)]2(Bu4N)2 (III), [(Cl4-cat)(PPr3)MoFe3S4(N3)2]2(Bu4N)4 (IV), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(N3)]2(Bu4N)2 (V), and [(Cl4-cat)(PPr3)MoFe3S4Cl2]2(Et4N)4 (VI) have been obtained and structurally characterized. A study of their electrochemistry shows that the reduction potentials for the derivatives of I are shifted to more positive values than those of I, suggesting a stabilization of the reduced clusters by the anionic ligands BH4- and N3-. Using 1H NMR spectroscopy, we have explored the lability of the BH4- ligand in II in coordinating solvents and its hydridic character, which is apparent in its reactivity toward proton sources such as MeOH or PhOH.     

Ligand Substitution Reactions at the Nickel of [Mo(3)NiS(4)(H(2)O)(10)](4+) with Two Water Soluble Phosphines, CO, Br(-), I(-), and NCS(-) and the Inertness of the 1,4,7-Triazacyclononane (L) Complex [Mo(3)(NiL)S(4)(H(2)O)(9)](4+)

Comparisons (25 degrees C) are made of substitution reactions, X replacing H(2)O, at the tetrahedral Ni of the heterometallic sulfido cuboidal cluster [Mo(3)NiS(4)(H(2)O)(10)](4+), I = 2.00 M (LiClO(4)). Stopped-flow formation rate constants (k(f)/M(-)(1) s(-)(1)) for six X reagents, including two water soluble air-stable phosphines, 1,3,5-triaza-7-phosphaadamantane PTA (119) and tris(3-sulfonatophenyl)phosphine TPPTS(3)(-) (58), and CO (0.66), Br(-) (14.6), I(-) (32.3), and NCS(-) (44) are reported alongside the previous value for Cl(-) (9.4). A dependence on [H(+)] is observed with PTA, which gives an unreactive form confirmed by NMR as N-protonated PTA (acid dissociation constant K(a) = 0.61 M), but in no other cases with [H(+)] in the range 0.30-2.00 M. The narrow spread of rate constants for all but the CO reaction is consistent with an I(d) dissociative interchange mechanism. In addition NMR studies with H(2)(17)O enriched solvent are too slow for direct determination of the water-exchange rate constant indicating a value <10(3) s(-)(1). Equilibrium constants/M(-)(1) for 1:1 complexing with the different X groups at the Ni are obtained for PTA (2040) and TPPTS(3)(-) (8900) by direct spectrophotometry and from kinetic studies (k(f)/k(b)) for Cl(-) (97), Br(-) (150), NCS(-) (690), and CO (5150). No NCS(-) substitution at the Ni is observed in the case of the heterometallic cube [Mo(3)Ni(L)S(4)(H(2)O)(9)](4+), with tridentate 1,4,7-triazacyclononane(L) coordinated to the Ni. Substitution of NCS(-) for H(2)O, at the Mo's of [Mo(3)NiS(4)(H(2)O)(10)](4+) and [Mo(3)(NiL)S(4)(H(2)O)(9)](4+) are much slower secondary processes, with k(f) = 2.7 x 10(-)(4) M(-)(1) s(-)(1) and 0.94 x 10(-)(4) M(-)(1) s(-)(1) respectively. No substitution of H(2)O by TPPTS(3)(-) or CO is observed over approximately 1h at either metal on [Mo(3)FeS(4)(H(2)O)(10)](4+), on [Mo(4)S(4)(H(2)O)(12)](5+) or [Mo(3)S(4)(H(2)O)(9)](4+).     

Binding nucleophiles to [Fe4Y4Cl4](2-) (Y = S or Se) can increase or suppress the rate of proton transfer to the cluster

In the proton transfer reactions between [Fe 4Y 4Cl 4] (2-) (Y = S or Se) and [pyrH] (+) (pyr = pyrrolidine) in the presence of a variety of nucleophiles (L = I (-), Br (-), PhS (-), EtS (-) or ButNC), initial binding of the nucleophile can occur to generate [Fe 4Y 4Cl 4(L)] ( n- ). The subsequent rate of proton transfer depends markedly on the nature of L. Stopped-flow kinetic studies show that proton transfer from [pyrH] (+) to [Fe 4Y 4Cl 4] (2-) { (S) k 4 = (2.1 +/- 0.5) x 10 (4) dm (3) mol (-1) s (-1); (Se) k 4 = (8.0 +/- 0.5) x 10 (3) dm (3) mol (-1) s (-1)} is increased by prior binding of L = PhS (-) or Bu ( t )NC to form [Fe 4Y 4Cl 4(L)] (n-) ( (S) k 7 (L) approximately 1 x 10 (6) dm (3) mol (-1) s (-1)), but prior binding of L = I (-), Br (-), or EtS (-) to the clusters inhibits the rate of proton transfer {e.g. (S) k 7 (I) = (6.0 +/- 0.8) x 10 (2) dm (3) mol (-1) s (-1); (Se) k 7 (I) = (4.5 +/- 0.5) x 10 (2) dm (3) mol (-1) s (-1)}. This behavior is correlated with the bonding characteristics of L and the effect this has on bond length reorganization within the cluster upon proton transfer.     

Aqueous Solution Chemistry of the Mo(3)PdS(4) Cube: Substitution Reactions and the Double to Single Cube Interconversion Induced by CO, Two Phosphines, Cl(-), Br(-), and NCS(-)

The kinetics of conversion of an edge-linked double cube, in this case [{Mo(3)PdS(4)(H(2)O)(9)}(2)](8+), to the corresponding single cube [Mo(3)(PdX)S(4)(H(2)O)(9)](4+), has been studied for the first time. Reaction is induced by six reagents X = CO, two water-soluble phosphines, Cl(-), Br(-), and NCS(-), which complex at the tetrahedral Pd. The first stage of reaction is fast and is accompanied by color changes, e.g. purple to dark blue in the case of Cl(-), assigned as double to single cube conversion. With X = CO and the two phosphines, when absorbance changes are intense enough for stopped-flow monitoring with reactants at Pd-SCN. On removal of e.g. Cl(-) by chromatography or addition of Ag(+), the double cube re-forms.     

Stabilization of 3:1 site-differentiated cubane-type clusters in the [Fe(4)S(4)](1+) core oxidation state by tertiary phosphine ligation: synthesis, core structural diversity, and S = 1/2 ground states

An extensive series of 3:1 site-differentiated cubane-type clusters [Fe(4)S(4)(PPr(i)(3))(3)L] (L = Cl(-), Br(-), I(-), RO(-), RS(-), RSe(-)) has been prepared in 40-80% yield by two methods: ligand substitution of [Fe(4)S(4)(PPr(i)(3))(4)](1+) in tetrahydrofuran (THF)/acetonitrile by reaction with monoanions, and reductive cleavage of ligand substrates (RSSR, RSeSeR, I(2)) by the all-ferrous clusters [Fe(8)S(8)(PPr(i)(3))(6)]/[Fe(16)S(16)(PPr(i)(3))(8)] in THF. These neutral clusters are stable and do not undergo ligand redistribution reactions involving charged species in benzene and THF solutions. X-ray structural studies confirm the cubane stereochemistry but with substantial and variable distortions of the [Fe(4)S(4)](1+) core from idealized cubic core geometry. Based on Fe-S bond lengths, seven clusters were found to have compressed tetragonal distortions (4 short and 8 long bonds), and the remaining seven display other types of distortions with different combinations of long, short, and intermediate bond lengths. These results further emphasize the facile deformabililty of this core oxidation state previously observed in [Fe(4)S(4)(SR)(4)](3-) clusters. The Fe(2.25+) mean oxidation state was demonstrated from (57)Fe isomer shifts, and the appearance of two quadrupole doublets arises from the spin-coupled |9/2,4,1/2> state. The S = 1/2 ground state was further supported by electron paramagnetic resonance spectra and magnetic susceptibility data.     

Cubane-type Fe4S4 clusters with chiral thiolate ligation: formation by ligand substitution, detection of intermediates by 1H NMR, and solid state structures including spontaneous resolution upon crystallization

Cubane-type clusters [Fe(4)S(4)(SR*)(4)](2-) containing chiral thiolate ligands with R* = CH(Me)Ph (1), CH(2)CH(Me)Et (2), and CH(2)CH(OH)CH(2)OH (3) have been prepared by ligand substitution in the reaction systems [Fe(4)S(4)(SEt)(4)]/R*SH (1-3, acetonitrile) and [Fe(4)S(4)Cl(4)](2-)/NaSR*(3, Me(2)SO). Reactions with successive equivalents of thiol or thiolate generate the species [Fe(4)S(4)L(4-n)(SR*)(n)](2-) (L = SEt, Cl) with n = 1-4. Clusters 1 and 2 were prepared with racemic thiols leading to the possible formation of one enantiomeric pair (n = 1) and seven diastereomers and their enantiomers (n = 2-4). Reactions were monitored by isotropically shifted (1)H NMR spectra in acetonitrile or Me(2)SO. In systems affording 1 and 2 as final products, individual mixed-ligand species could not be detected. However, crystallization of (Et(4)N)(2)[1] afforded 1-[SS(RS)(RS)] in which two sites are disordered because of occupancy of R and S ligands. Similarly, (Et(4)N)(2)[2] led to 2-[SSSS], a consequence of spontaneous resolution upon crystallization. The clusters 3-[RRRR] and 3-[SSSS] were obtained from enantiomerically pure thiols. Successive reactions lead to detection of species with n = 1-4 by appearance of four pairs of diastereotopic SCH(2) signals in both acetonitrile and Me(2)SO reaction systems. Identical spectra were obtained with racemic, R-(-), and S-(+) thiols, indicating that ligand-ligand interactions are too weak to allow detection of diastereomers (e.g., [SSSS] vs [SSRR]). The stability of 3 in Me(2)SO/H(2)O media is described.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

Reactivity of [Fe4S4(SR)4]2-,3- clusters with sulfonium cations: analogue reaction systems for the initial step in biotin synthase catalysis

The first step in catalysis by a class of iron-sulfur enzymes that includes biotin synthase is the one-electron reductive cleavage of the obligatory cofactor S-adenosylmethionine by an [Fe(4)S(4)](+) cluster to afford methionine and the deoxyadenosyl radical (DOA*). To provide detailed information about the reactions of sulfonium ions with [Fe(4)S(4)](2+,+) clusters, the analogue reaction systems [Fe(4)S(4)(SR')(4)](2)(-)(,3)(-)/[PhMeSCH(2)R](+) (R' = Et (4, 6), Ph (5, 7); R = H (8), COPh (9), p-C(6)H(4)CN (10)) were examined by (1)H NMR spectroscopy. Sulfonium ions 8-10 react completely with oxidized clusters 4 and 5 to afford PhSMe and R'SCH(2)R in equimolar amounts as a result of electrophilic attack by the sulfonium ion on cluster thiolate ligands. Reactions are also complete with reduced clusters 6 and 7 but afford, depending on the substrate, the additional products RCH(3) (R = PhCO, p-C(6)H(4)CN) and the ylid PhMeS=CHR or (p-NCC(6)H(4)CH(2))(2). Redox potentials of 9 and 10 allow electron transfer from 6 or 7. The reaction systems 6/9,10 and 7/9,10 exhibit two reaction pathways, reductive cleavage and electrophilic attack, in an ca. 4:1 ratio inferred from product distribution. Cleavage is a two-electron process and, for example in the system 6/9, is described by the overall reaction 2[Fe(4)S(4)(SR')(4)](3)(-) + 2[PhMeSCH(2)R](+) --> 2[Fe(4)S(4)(SR')(4)](2)(-) + PhSMe + RCH(3) + PhMeS=CHR. This and other reactions may be summarized as [PhMeSCH(2)R](+) + 2e(-) + H(+) --> PhSMe + RCH(3); proposed reaction sequences parallel those for electrochemical reduction of sulfonium ions. This work demonstrates the intrinsic ability of [Fe(4)S(4)](+) clusters with appropriate redox potentials to reductively cleave sulfonium substrates in overall two-electron reactions. The analogue systems differ from the enzymes in that DOA* is generated in a one-electron reduction and is sufficiently stabilized within the protein matrix to abstract a hydrogen atom from substrate or an amino acid residue in a succeeding step. In the present systems, the radical produced in the initial step of the reaction sequence, [Fe(4)S(4)(SR')(4)](3)(-) + [PhMeSCH(2)R](+) --> [Fe(4)S(4)(SR')(4)](2)(-) + PhSMe + RCH(2)*, is not stabilized and is quenched by reduction and protonation.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

1,4-dioxobenzene compounds of gallium: reversible binding of pyridines to [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n) in the solid state

The gallium aryloxide polymer, [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n)(1) is synthesized by the addition of Ga((t)()Bu)(3) with hydroquinone in a noncoordinating solvent, and reacts with pyridines to yield the yellow compound [((t)()Bu)(2)Ga(L)](2)(mu-OC(6)H(4)O) [L = py (2), 4-Mepy (3), and 3,5-Me(2)py (4)] via cleavage of the Ga(2)O(2) dimeric core. The analogous formation of Ga((t)()Bu)(2)(OPh)(py) (5) occurs by dissolution of [((t)Bu)(2)Ga(mu-OPh)](2) in pyridine. In solution, 2-4 undergo dissociation of one of the pyridine ligands to yield [((t)()Bu)(2)Ga(L)(mu-OC(6)H(4)O)Ga((t)Bu)(2)](2), for which the DeltaH and DeltaS have been determined. Thermolysis of compounds 2-4 in the solid-state results in the loss of the Lewis base and the formation of 1. The reaction of 1 or [((t)Bu)(2)Ga(mu-OPh)](2) with the vapor of the appropriate ligand results in the solid state formation of 2-4 or 5, respectively. The deltaH and deltaS for both ligand dissociation and association for the solid-vapor reactions have been determined. The interconversion of 1 into 2-4, as well as [((t)Bu)(2)Ga(mu-OPh)](2) into 5, and their reverse reactions, have been followed by (13)C CPMAS NMR spectroscopy, TG/DTA, SEM, EDX, and powder XRD. Insight into this solid-state polycondensation polymerization reaction may be gained from the single-crystal X-ray crystallographic packing diagrams of 2-5. The crystal packing for compounds 2, 3, and 5 involve a head-to-head arrangement that is maintained through repeated ligand dissociation and association cycles. In contrast, when compound 4 is crystallized from solution a head-to-tail packing arrangement is formed, but during reintroduction of 3,5-Me(2)py in the solid state-vapor reaction of compound 1, a head-to-head polymorph is postulated to account for the alteration in the deltaH of subsequent ligand dissociation reactions. Thus, the deltaH for the condensation polymerization reaction is dependent on the crystal packing; however, the subsequent reversibility of the reaction is dependent on the polymorph.     

Selective syntheses of iron-imide-sulfide cubanes, including a partial representation of the Fe-S-X environment in the FeMo cofactor

The dinuclear precursors Fe(2)(N(t)Bu)(2)Cl(2)(NH(2)(t)Bu)(2), [Fe(2)(N(t)Bu)(S)Cl(4)](2-), and Fe(2)(NH(t)Bu)(2)(S)(N{SiMe(3)}(2))(2) allowed the selective syntheses of the cubane clusters [Fe(4)(N(t)Bu)(n)(S)(4-n)Cl(4)](z) with [n, z] = [3, 1-], [2, 2-], [1, 2-]. Weak-field iron-sulfur clusters with heteroleptic, nitrogen-containing cores are of interest with respect to observed or conjectured environments in the iron-molybdenum cofactor of nitrogenase. In this context, the present iron-imide-sulfide clusters constitute a new class of compounds for study, with the Fe(4)NS(3) core of the [1, 2-] cluster affording the first synthetic representation of the corresponding heteroligated Fe(4)S(3)X subunit in the cofactor.     

Terminal ligand influence on the electronic structure and intrinsic redox properties of the [Fe4S4]2+ cubane clusters

We used photoelectron spectroscopy (PES) to study how the terminal ligands influence the electronic structure and redox properties of the [4Fe-4S] cubane in several series of ligand-substituted analogue complexes: [Fe(4)S(4)Cl(4-x)(CN)(x)](2-), [Fe(4)S(4)Cl(4-x)(SCN)(x)](2-), [Fe(4)S(4)Cl(4-x)(OAc)(x)](2-), [Fe(4)S(4)(SC(2)H(5))(4-x)(OPr)(x)](2-), and [Fe(4)S(4)(SC(2)H(5))(4-x)Cl(x)](2-) (x = 0-4). All the ligand-substituted complexes gave similar PES spectral features as the parents, suggesting that the mixed-ligand coordination does not perturb the electronic structure of the cubane core significantly. The terminal ligands, however, have profound effects on the electron binding energies of the cubane and induce significant shifts of the PES spectra, increasing in the order SC(2)H(5)(-) --> Cl(-) --> OAc(-)/OPr(-) --> CN(-) --> SCN(-). A linear relationship between the electron binding energies and the substitution number x was observed for each series, indicating that each ligand contributes independently and additively to the total binding energy. The electron binding energies of the gaseous complexes represent their intrinsic oxidation energies; the observed linear dependence on x is consistent with similar observations on the redox potentials of mixed-ligand cubane complexes in solution. The current study reveals the electrostatic nature of the interaction between the [4Fe-4S] cubane core and its coordination environment and provides further evidence for the electronic and structural stability of the cubane core and its robustness as a structural and functional unit in Fe-S proteins.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Synthesis and structure of singly bridged and doubly bridged [MoFe(3)S(4)] double cubanes with bidentate phosphine ligands

The reactions of the (Et(4)N)(2)[(Cl(4)-cat)(MeCN)MoFe(3)S(4)Cl(3)] (I) cluster with Fe(pp)(2)Cl(2) (pp = depe (bis(1,2-diethylphosphino)ethane) or dmpe (bis(1,2-dimethylphosphino)ethane)) produced the [(Cl(4)-cat)MoFe(3)S(4)(pp)(2)Cl](2)(mu-pp) (pp = depe (III) or dmpe (V)) singly bridged double cubanes. The reactions of I with the same bidentate phosphine ligands in the presence of NaBPh(4) also produced III and the [(Cl(4)-cat)MoFe(3)S(4)(dmpe)(2)](2)(mu-S)(mu-dmpe) (VI) doubly bridged double cubane, respectively. The byproduct (BPh(4))[Fe(dmpe)(2)(MeCN)Cl] (VII) has been isolated from the reaction mixture and crystallographically characterized. The depe analogue of VI, [(Cl(4)-cat)MoFe(3)S(4)(depe)(2)](2)(mu-S)(mu-depe) (IV), has been successfully prepared from III in the presence of excess Li(2)S. Similar reactions with (Et(4)N)(2)[Fe(4)S(4)(SPh)(4)] (VIII) have resulted in the formation of the neutral Fe(4)S(4)(depe)(2)(SPh)(2) (IX) cluster. The chloride analogue of IX, Fe(4)S(4)(depe)(2)Cl(2) (XI), has been obtained by a reaction of IX with benzoyl chloride. The crystal and molecular structures of III, VI, VII, and XI have been determined by single-crystal X-ray crystallography. The electrochemical and spectroscopic properties, including the Mossbauer spectra of the new clusters, have been determined and analyzed.     

Valence-Dependent Metal-Metal Bonding and Optical Spectra in Confacial Bioctahedral [Re(2)Cl(9)](z)()(-) (z = 1, 2, 3). Crystallographic and Computational Characterization of [Re(2)Cl(9)](-) and [Re(2)Cl(9)](2)(-)

The geometric structure of the confacial bioctahedral [Re(2)Cl(9)](z)()(-) anion has been determined by single-crystal X-ray diffraction in two distinct oxidation states, Re(IV)(2) and Re(III)Re(IV). [Bu(4)N][Re(2)Cl(9)] crystallizes in the monoclinic space group P2(1)/m [a/? = 10.6363(3), b/? = 11.420(1), c/? = 13.612(1), beta/deg = 111.18(1), Z = 2], while [Et(4)N](2)[Re(2)Cl(9)] crystallizes in the orthorhombic space group Pnma [a/? = 15.82(1), b/? = 8.55(2), c/? = 22.52(3), Z = 4]. The Re-Re separation contracts from 2.704(1) ? in [Bu(4)N][Re(2)Cl(9)] to 2.473(4) ? in [Et(4)N](2)[Re(2)Cl(9)] (or, equivalently, from 2.725 to 2.481 ? after standard corrections for thermal motions), while the formal metal-metal bond order falls from 3.0 to 2.5. SCF-Xalpha-SW molecular orbital calculations show that, despite the {d(3)d(3)} configuration, the single sigma bond in [Re(2)Cl(9)](-) dominates the observed structural properties. For [Re(2)Cl(9)](2)(-), the 0.23 ? contraction in Re-Re is attributed jointly to radial expansion of the Re 5d orbitals and to diminished metal-metal electrostatic repulsion, which act in concert to make both sigma and delta(pi) bonding more important in the reduced species. Computed transition energies and oscillator strengths for the two structurally defined anions permit rational analysis of their ultraviolet spectra, which involve both sigma --> sigma and halide-to-metal change-transfer absorptions. The intense sigma --> sigma band progresses from 31 000 cm(-)(1) in [Re(2)Cl(9)](-) to 36 400 cm(-)(1) in [Re(2)Cl(9)](2)(-), according to the present assignments. For electrogenerated, highly reactive [Re(2)Cl(9)](3)(-) (where conventional X-ray structural information is unlikely to become available), the dominant absorption band advances to 40 000 cm(-)(1), suggesting further strengthening of the metal-metal sigma bond in the Re(III)(2) species.