The role of an interface in stabilizing reaction intermediates for hydrogen evolution in aprotic electrolytes

By combining idealized experiments with realistic quantum mechanical simulations of an interface, we investigate electro-reduction reactions of HF, water and methanesulfonic acid (MSA) on the single crystal (111) facets of Au, Pt, Ir and Cu in organic aprotic electrolytes, 1 M LiPF₆ in EC/EMC 3:7W (LP57), the aprotic electrolyte commonly used in Li-ion batteries, 1 M LiClO₄ in EC/EMC 3:7W and 0.2 M TBAPF₆ in 3 : 7 EC/EMC. In our previous work, we have established that LiF formation, accompanied by H₂ evolution, is caused by a reduction of HF impurities and requires the presence of Li at the interface, which catalyzes the HF dissociation. In the present paper, we find that the measured potential of the electrochemical response for these reduction reactions correlates with the work function of the electrode surfaces and that the work function determines the potential for Li⁺ adsorption. The reaction path is investigated further by electrochemical simulations suggesting that the overpotential of the reaction is related to stabilizing the active structure of the interface having adsorbed Li⁺. Li⁺ is needed to facilitate the dissociation of HF which is the source of protons. Further experiments on other proton sources, water and methanesulfonic acid, show that if the hydrogen evolution involves negatively charged intermediates, F⁻ or HO⁻, a cation at the interface can stabilize them and facilitate the reaction kinetics. When the proton source is already significantly dissociated (in the case of a strong acid), there is no negatively charged intermediate and thus the hydrogen evolution can proceed at much lower overpotentials. This reveals a situation where the overpotential for electrocatalysis is related to stabilizing the active structure of the interface, facilitating the reaction rather than providing the reaction energy.

By combining idealized experiments with realistic quantum mechanical simulations of an interface, we investigate electroreduction reactions of HF, water and methanesulfonic acid on the single crystal (111) facets of Au, Pt, Ir and Cu in a variety of aprotic electrolytes.     

Transition-metal-mediated reduction and reversible double-cyclization of cyanuric triazide to an asymmetric bitetrazolate involving cleavage of the six-membered aromatic ring

Cyanuric triazide reacts with several transition metal precursors, extruding one equivalent of N₂ and reducing the putative diazidotriazeneylnitrene species by two electrons, which rearranges to N-(1′H-[1,5′-bitetrazol]-5-yl)methanediiminate (biTzI²⁻) dianionic ligand, which ligates the metal and dimerizes, and is isolated from pyridine as [M(biTzI)]₂Py₆ (M = Mn, Fe, Zn, Cu, Ni). Reagent scope, product analysis, and quantum chemical calculations were combined to elucidate the mechanism of formation as a two-electron reduction preceding ligand rearrangement.

Cyanuric triazide reacts with transition metal precursors, extruding N₂ and reducing the ligand by two electrons, which breaks an aromatic ring and rearranges to a bitetrazolylmethanediiminate (biTzI²⁻) ligand, forming two new aromatic rings.     

Nitric oxide monooxygenation (NOM) reaction of cobalt-nitrosyl {Co(NO)}8 to CoII-nitrito {CoII(NO2−)}: base induced hydrogen gas (H2) evolution

Here, we report the nitric oxide monooxygenation (NOM) reactions of a Co^III-nitrosyl complex (1, {Co-NO}⁸) in the presence of mono-oxygen reactive species, i.e., a base (OH⁻, tetrabutylammonium hydroxide (TBAOH) or NaOH/15-crown-5), an oxide (O²⁻ or Na₂O/15-crown-5) and water (H₂O). The reaction of 1 with OH⁻ produces a Co^II-nitrito complex {3, (Co^II-NO₂⁻)} and hydrogen gas (H₂), via the formation of a putative N-bound Co-nitrous acid intermediate (2, {Co-NOOH}⁺). The homolytic cleavage of the O–H bond of proposed [Co-NOOH]⁺ releases H₂via a presumed Co^III-H intermediate. In another reaction, 1 generates Co^II-NO₂⁻ when reacted with O²⁻via an expected Co^I-nitro (4) intermediate. However, complex 1 is found to be unreactive towards H₂O. Mechanistic investigations using ¹⁵N-labeled-¹⁵NO and ²H-labeled-NaO²H (NaOD) evidently revealed that the N-atom in Co^II-NO₂⁻ and the H-atom in H₂ gas are derived from the nitrosyl ligand and OH⁻ moiety, respectively.

Base-induced hydrogen (H₂) gas evolution in the nitric oxide monoxygenation reaction.

As a radical species, nitric oxide (NO) has attracted great interest from the scientific community due to its major role in various physiological processes such as neurotransmission, vascular regulation, platelet disaggregation and immune responses to multiple infections.¹ Nitric oxide synthase (NOS),² and nitrite reductase (NiR)³ enzymes are involved in the biosynthesis of NO. NOSs produce NO by the oxidation of the guanidine nitrogen in l-arginine.⁴ However, in mammals and bacteria, NO₂⁻ is reduced to NO by NiRs in the presence of protons, i.e., NO₂⁻ + e⁻ + 2H⁺ → NO + H₂O.⁵ Biological dysfunctions may cause overproduction of NO, and being radical it leads to the generation of reactive nitrogen species (RNS), i.e., peroxynitrite (PN, OONO⁻)⁶ and nitrogen dioxide (˙NO₂),⁷ upon reaction with reactive oxygen species (ROS) such as superoxide (O₂˙⁻),⁸ peroxide (H₂O₂),⁹ and dioxygen (O₂).¹⁰ Hence, it is essential to maintain an optimal level of NO. In this regard, nitric oxide dioxygenases (NODs)¹¹ are available in bio-systems to convert excess NO to biologically benign nitrate (NO₃⁻).¹²NO₂⁻ + Fe^II + H⁺ ↔ NO + Fe^III + OH⁻1[M–NO]ⁿ + 2OH⁻ → [M–NO₂]⁽ⁿ⁻²⁾ + H₂O2NOD enzymes generate NO₃⁻ from NO;^11b,12−13 however, the formation of NO₂⁻ from NO is still under investigation. Clarkson and Bosolo reported NO₂⁻ formation in the reaction of Co^III-NO and O₂.¹⁴ Nam and co-workers showed the generation of Co^II-NO₂⁻ from Co^III-NO upon reaction with O₂˙⁻.¹⁵ Recently, Mondal and co-workers reported NO₂⁻ formation in the reaction of Co^II-NO with O₂.¹⁶ Apart from cobalt, the formation of Cu^II-NO₂⁻ was also observed in the reaction of Cu^I-NO and O₂.¹⁷ For metal-dioxygen adducts, i.e., Cr^III-O₂˙⁻ and Mn^IV-O₂²⁻, NOD reactions led to the generation of Cr^III-NO₂⁻ (ref. 18) and Mn^V O + NO₂⁻,¹⁹ respectively. However, the NOD reaction of Fe^III-O₂˙⁻ and Fe^III-O₂²⁻ with NO and NO⁺, respectively, generated Fe^III-NO₃⁻via Fe^IV O and ˙NO₂.²⁰ Ford suggested that the reaction of ferric-heme nitrosyl with hydroxide leads to the formation of NO₂⁻ and H⁺.¹² Lehnert and co-workers reported heme-based Fe-nitrosyl complexes²¹ showing different chemistries due to the Fe^II-NO⁺ type electronic structures. On the other hand, Bryan proposed that the one-electron reduction of NO₂⁻ to NO in ferrous heme protein is reversible (eqn (1)).²² Also, it is proposed that excess NO in biological systems is converted to NO₂⁻ and produces one equivalent of H⁺ upon reaction with ˙OH.²³ Previously reported reactivity of M–NOs of Fe²⁴ with OH⁻ suggested the formation of NO₂⁻ and one equivalent of H⁺, where H⁺ further reacts with one equivalent of OH⁻ and produces H₂O (eqn (2)).²⁵Here in this report, we explore the mechanistic aspects of nitric oxide monooxygenation (NOM) reactions of the Co^III-nitrosyl complex, [(12TMC)Co^III(NO⁻)]²⁺/{Co(NO)}⁸ (1),^15,26 bearing the 12TMC ligand (12TMC = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane) with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). Complex 1 reacts with the base (OH⁻, tetrabutylammonium hydroxide (TBAOH)/or NaOH in the presence of 15-crown-5 as the OH⁻ source) and generates the corresponding Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with the evolution of hydrogen gas (H₂) via the formation of a plausible N-bound Co-nitrous acid intermediate ([Co-NOOH]⁺, 2) in CH₃CN at 273 K (Scheme 1, reaction (I)). Also, when 1 reacts with the oxide (O²⁻ or Na₂O in the presence of 15-crown-5), it generates the Co^II-nitrito complex (3) via a probable Co^I-nitro, [(12TMC)Co^I(NO₂⁻)] (4), intermediate (Scheme 1, reaction (II)); however, 1 does not react with water (Scheme 1, reaction (III)). Mechanistic investigations using ¹⁵N-labeled-¹⁵NO, D-labeled-NaOD and ¹⁸O-labelled-¹⁸OH⁻ demonstrated, unambiguously, that the N and O-atoms in the NO₂⁻ ligand of 3 resulted from NO and OH⁻ moieties; however, the H-atoms of H₂ are derived from OH⁻. To the extent of our knowledge, the present work reports the very first systematic study of Co^III-nitrosyl complex reactions with H₂O, OH⁻ and O²⁻. This new finding presents an alternative route for NO₂⁻ generation in biosystems, and also illustrates a new pathway of H₂ evolution, in addition to the reported literature.^12,27Open in a separate windowScheme 1Nitric oxide monooxygenation (NOM) reactions of cobalt-nitrosyl complex (1) in the presence of a base (OH⁻), sodium oxide (Na₂O) and water (H₂O).To further explore the chemistry of [(12TMC)Co^III(NO⁻)]²⁺ (1),^15,26 and the mechanistic insights of NOM reactions, we have reacted it with a base (OH⁻), an oxide (O²⁻), and water (H₂O). When complex 1 was reacted with TBAOH in CH₃CN, the color of complex 1 changed to light pink from dark pink. In this reaction, the characteristic absorption band of 1 (370 nm) disappears within 2 minutes (Fig. 1a; ESI, Experimental section (ES) and Fig. S1a^†), producing a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with H₂ (Scheme 1, reaction (Ib)), in contrast to the previous reports on base induced NOM reactions (eqn (2)).^12,25,28 The spectral titration data confirmed that the ratio-metric equivalent of OH⁻ to 1 was 1 : 1 (ESI, Fig. S1b^†). 3 was determined to be [(12TMC)Co^II(NO₂⁻)](BF₄) based on various spectroscopic and structural characterization experiments (vide infra).^15,26bOpen in a separate windowFig. 1(a) UV-vis spectral changes of 1 (0.50 mM, black line) upon addition of OH⁻ (1 equiv.) in CH₃CN under Ar at 273 K. Black line (1) changed to red line (3) upon addition of OH⁻. Inset: IR spectra of 3-¹⁴NO₂⁻ (blue line) and 3-¹⁵NO₂⁻ (red line) in KBr. (b) ESI-MS spectra of 3. The peak at 333.2 is assigned to [(12TMC)Co^II(NO₂)]⁺ (calcd m/z 333.1). Inset: isotopic distribution pattern for 3-¹⁴NO₂⁻ (red line) and 3-¹⁵NO₂⁻ (blue line).The FT-IR spectrum of 3 showed a characteristic peak for nitrite stretching at 1271 cm⁻¹ (Co^II-14NO₂⁻) and shifted to 1245 cm⁻¹ (Co^II-15NO₂⁻) when 3 was prepared by reacting ¹⁵N-labeled NO (Co^III-15NO) with OH⁻ (Inset, Fig. 1a and Fig. S2^†). The shifting of NO₂⁻ stretching (Δ = 30 cm⁻¹) indicates that the N-atom in the NO₂⁻ ligand is derived from Co^III-15NO. The ESI-MS spectrum of 3 showed a prominent peak at m/z 333.2, [(12TMC)Co^II(¹⁴NO₂⁻)]⁺ (calcd m/z 333.2), which shifted to 334.2, [(12TMC)Co^II(¹⁵NO₂⁻)]⁺ (calcd m/z 334.2), when the reaction was performed with Co^III-15NO (Inset, Fig. 1b; ESI, Fig. S3a^†); indicating clearly that NO₂⁻ in 3 was derived from the NO moiety of 1. In addition, we have reacted 1 with Na¹⁸OH (ES and ESI^†), in order to follow the source of the second O-atom in 3-NO₂⁻. The ESI-MS spectrum of the reaction mixture, obtained by reacting 1 with Na¹⁸OH, showed a prominent peak at m/z 335.2, [(12TMC)Co^II(¹⁸ONO⁻)]⁺ (calcd m/z 335.2), (SI, Fig. S3b^†) indicating clearly that NO₂⁻ in 3 was derived from ¹⁸OH⁻. The ¹H NMR spectrum of 3 did not show any signal for aliphatic protons of the 12TMC ligand, suggesting a bivalent cobalt center (Fig. S4^†).^26b Furthermore, we have determined the magnetic moment of 3, using Evans'' method, and it was found to be 4.62 BM, suggesting a high spin Co(ii) metal center with three unpaired electrons (ESI^† and ES).²⁹ The exact conformation of 3 was provided by single-crystal X-ray crystallographic analysis (Fig. 2b, ESI, ES, Fig. S5, and Tables T1 and T2^†) and similar to that of previously reported Co^II-NO₂⁻/M^II-NO₂⁻.^15,26b Also, we have quantified the amount of nitrite (90 ± 5%), formed in the above reaction, using the Griess reagent (ESI, ES, and Fig. S6^†).Open in a separate windowFig. 2Displacement ellipsoid plot (20% probability) of 3 at 100 K. Disordered C-atoms of the TMC ring, anion and H-atoms have been removed for clarity.As is known from the literature, a metal-nitrous acid intermediate may form either by the reaction of a metal-nitrosyl with a base²⁷ or by the metal-nitrite reaction with an acid (nitrite reduction chemistry);^26b however, the products of both the reactions are different. Here, for the first time, we have explored the reaction of Co^III-nitrosyl (1) with a base. In this reaction, it is clear that the formation of Co^II-nitrito would be accomplished by the release of H₂ gas via the generation of a transient N-bound [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (II)). The formation of Co^II-NO₂⁻ (3) from the [Co-(NOOH)]⁺ intermediate is likely to proceed by either (i) homolytic cleavage of the O–H bond and release of H₂via the proposed Co^III-H transient species (Co^III-H = Co^II + 1/2H₂)³⁰ (Scheme 2, reaction (III)), as reported in previous literature where the reduced cobalt, in a number of different ligand environments, is a good H⁺ reduction catalyst and generates H₂ gas via a Co^III-H intermediate³¹ or (ii) heterolytic cleavage of the O–H bond and the formation of Co^I-NO₂⁻ + H⁺.²⁷ In the present study, we observed the formation of 3 and H₂via the plausible homolytic cleavage of the NOO–H moiety of 2 as shown in Scheme 2, in contrast to the previous reports on base-induced reactions on metal-nitrosyls (eqn (3)).²⁷ Taking together both possibilities, (i) is the most reasonable pathway for the NOM reaction of complex 1 in the presence of a base (as shown in Scheme 2, reaction (III)). And the reaction is believed to go through a Co^III-H intermediate as reported previously in Co^I-induced H⁺ reduction in different ligand frameworks and based on literature precedence, we believe that complex 1 acts in a similar manner.³¹Open in a separate windowScheme 2NOM reaction of complex 1 in the presence of OH⁻, showing the generation of Co^II-nitrito (3) and H₂via a Co(iii)-hydrido intermediate.In contrast to an O-bound Co^II-ONOH intermediate, where N–O bond homolysis of the ON-OH moiety generates H₂O₂ (Scheme 2, reaction (IV)),^26b the N-bound [Co-(NOOH)]⁺ intermediate decomposes to form NO₂⁻ and a Co(iii)-H transient species, arising from β-hydrogen transfer from the NOO–H moiety to the cobalt-center (Scheme 2, reaction (II)).^30a,c,32 The Co(iii)-hydrido species may generate H₂ gas either (a) by its transformation to the Co(ii)-nitrito complex (2) and H₂ gas as observed in the case of Co^III-H intermediate chemistry^30a,c,e−g as proposed in the chemistry of the Co^I complex with H⁺ reduction³¹ and other metal-hydrido intermediates³² and also explained in O₂ formation in PN chemistry^17,33 or (b) by the reacting with another [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (III)).Furthermore, we have confirmed the H₂ formation in the NOM reaction of 1 with OH⁻ by headspace gas mass spectrometry (Fig. 3a). Also, carrying out the reaction of 1 with NaOD leads to the formation of the [Co-(NOOD)]⁺ intermediate, which then transforms to a Co^III-D transient species. Further, as described above, the Co^III-D species releases D₂ gas, detected by headspace gas mass spectrometry (Fig. 3b), which evidently established that H₂ gas formed in the reaction of 1 with OH⁻. In this regard, we have proposed that in the first step of this reaction, the nucleophilic addition of OH⁻ to {Co-NO}⁸ generates a transient N-bound [Co-(NOOH)]⁺ intermediate that is generated by an internal electron transfer to Co^III (Scheme 2, reaction (I)). By following the mechanism proposed in the case of Co^III-H,^30a−c O₂,¹⁵ and H₂O₂(ref. 26b) formation, we have proposed the sequences of the NOM reaction of 1, which leads to the generation of Co^II-nitrito and H₂ (Scheme 2, reaction (I)–(III) and Scheme 3). In the second step, O–H bond homolytic cleavage generates a Co^III-H transient species + NO₂⁻via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate.³² The Co^III-H intermediate may undergo the following reactions to generate H₂ gas and Co^II-nitrito either (a) by the natural decomposition of the Co^III-H transient species to generate H₂,^30a,c,e−g or (b) by the H-atom abstraction from another [Co-(NOOH)]⁺ intermediate (Scheme 3). Also, to validate our assumption that the reaction goes through a plausible N-bound [Co-(NOOH)]⁺ intermediate followed by its transformation to the Co^III-H species (vide supra), we have performed the reaction of 1 with NaOH/NaOD (in 1 : 1 ratio). In this reaction, we have observed the formation of a mixture of H₂, D₂, and HD gases, which indicates clearly that the reaction goes through the formation of Co^III-H and Co^III-D transient species via the aforementioned mechanism (Fig. 3c). This is the only example where tracking of the H atoms has confirmed the H₂ generation from an N-bound NOO–H moiety as proposed for H₂ formation from Co^III-H.³⁰Open in a separate windowFig. 3Mass spectra of formation of (a) H₂ in the reaction of 1 (5.0 mM) with NaOH (5.0 mM), (b) D₂ in the reaction of 1 (5.0 mM) with NaOD (5.0 mM), (c) D₂, HD, and H₂ in the reaction of 1 (5.0 mM) with NaOD/NaOH (1 : 1), and (d) H₂ in the reaction of 1 (5.0 mM) with NaOH in the presence of 2,4 DTBP (50 mM).Open in a separate windowScheme 3NOM reaction of complex 1 in the presence of OH⁻, showing the different steps of the reaction.While, we do not have direct spectral evidence to support the formation of the transient N-bound [Co-(NOOH)]⁺ intermediate and its decomposition to the Co^III-H transient species via β-hydrogen transfer from the NOOH moiety to the cobalt center, support for its formation comes from our finding that the reactive hydrogen species can be trapped by using 2,4-di-tert-butyl-phenol (2,4-DTBP).³⁴ In this reaction, we observed the formation of 2,4-DTBP-dimer (2,4-DTBP-D, ∼67%) as a single product (ESI, ES, and Fig. S7^†). This result can readily be explained by the H-atom abstraction reaction of 2,4-DTBP either by [Co-(NOOH)]⁺ or Co^III-H, hence generating a phenoxyl-radical and 3 with H₂ (Fig. 3d and Scheme 2, reaction (a)). Also, we have detected H₂ gas formation in this reaction (ESI,^† ES, and Fig. 3d). In the next step, two phenoxyl radicals dimerized to give 2,4-DTBP-dimer (Scheme 2c, reaction (II)). Thus, the observation of 2,4-DTBP-dimer in good yield supports the proposed reaction mechanism (Scheme 2, reaction (a) and (b)). Further, the formation of 2,4 DTBP as a single product also rules out the formation of the hydroxyl radical as observed in the case of an O-bound nitrous acid intermediate.^26bFurthermore, we have explored the NOM reactivity of 1 with Na₂O/15-crown-5 (as the O²⁻ source) and observed the formation of the Co^II-nitrito complex (3) via a plausible Co^I-nitro (4) intermediate (Scheme 1, reaction (IIa); also see the ESI^† and ES); however, 1 was found to be inert towards H₂O (Scheme 1, reaction (III); also see the ESI, ES and Fig. S8^†). The product obtained in the reaction of 1 with O²⁻ was characterized by various spectroscopic measurements.^15,26b The UV-vis absorption band of 1 (λ_max = 370 nm) disappears upon the addition of 1 equiv. of Na₂O and a new band (λ_max = 535 nm) forms, which corresponds to 3 (ESI, Fig. S9^†). The FT-IR spectrum of the isolated product of the above reaction shows a characteristic peak for Co^II-bound nitrite at 1271 cm⁻¹, which shifts to 1245 cm⁻¹ when exchanged with ¹⁵N-labeled-NO (¹⁵N¹⁶O) (ESI, ES, and Fig. S10^†), clearly indicating the generation of nitrite from the NO ligand of complex 1.^26b The ESI-MS spectrum recorded for the isolated product (vide supra) shows a prominent ion peak at m/z 333.1, and its mass and isotope distribution pattern matches with [(12-TMC)Co^II(NO₂)]⁺ (calc. m/z 333.1) (ESI, Fig. S11^†). Also, we quantified the amount of 3 (85 ± 5%) by quantifying the amount of nitrite (85 ± 5%) using the Griess reagent test (ESI, ES, and Fig. S6^†).In summary, we have demonstrated the reaction of Co^III-nitrosyl, [(12-TMC)Co^III(NO⁻)]²⁺/{CoNO}⁸ (1), with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). For the first time, we have established the clear formation of a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), and H₂ in the reaction of 1 with one equivalent of OH⁻via a transient N-bound [Co-(NOOH)]⁺ (2) intermediate. This [Co-(NOOH)]⁺ intermediate undergoes the O–H bond homolytic cleavage and generates a Co^III-H transient species with NO₂⁻, via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate, which upon decomposition produces H₂ gas. This is in contrast to our previous report, where acid-induced nitrite reduction of 3 generated 1 and H₂O₂via an O-bound Co^II-ONOH intermediate.^26b Complex 1 was found to be inert towards H₂O; however, we have observed the formation of 3 when reacted with O²⁻. It is important to note that H₂ formation involves a distinctive pathway of O–H bond homolytic cleavage in the [Co-(NOOH)]⁺ intermediate, followed by the generation of the proposed Co^III-H transient species (Co^II + 1/2H₂)³⁰ prior to H₂ evolution as described in Co^I chemistry with H⁺ in many different ligand frameworks.³¹ The present study is the first-ever report where the base induced NOM reaction of Co^III-nitrosyl (1) leads to Co^II-nitrito (3) with H₂ evolution via an N-bound [Co-(NOOH)]⁺ intermediate, in contrast to the chemistry of O-bound Co^II-ONOH^26b, hence adding an entirely new mechanistic insight of base induced H₂ gas evolution and an additional pathway for NOM reactions.     

Coulometric Determination of Chromium(VI) and Copper(II) Present Simultaneously

It was shown that chromium(VI) can be determined by coulometry at a Pt electrode in HNO₃and H₂SO₄solutions. A procedure for the determination of 1–4 mg of chromium in 0.5–1 M HNO₃solutions by controlled-potential coulometry with RSD = 0.2% was developed. It was demonstrated that the degree of the reduction of Cr(VI) to Cr(III) reached 99% (RSD = 0.5%) in the determination of chromium by coulometry at a slow potential sweep (v= 1–2 mV/s) in HNO₃solutions. A procedure was proposed for the determination of Cr(VI) and Cu(II) simultaneously present in 0.25–0.5 M H₂SO₄solutions by controlled-potential coulometry with RSD = 0.3%.     

Proton-conductive coordination polymer glass for solid-state anhydrous proton batteries

Designing solid-state electrolytes for proton batteries at moderate temperatures is challenging as most solid-state proton conductors suffer from poor moldability and thermal stability. Crystal–glass transformation of coordination polymers (CPs) and metal–organic frameworks (MOFs) via melt-quenching offers diverse accessibility to unique properties as well as processing abilities. Here, we synthesized a glassy-state CP, [Zn₃(H₂PO₄)₆(H₂O)₃](1,2,3-benzotriazole), that exhibited a low melting temperature (114 °C) and a high anhydrous single-ion proton conductivity (8.0 × 10⁻³ S cm⁻¹ at 120 °C). Converting crystalline CPs to their glassy-state counterparts via melt-quenching not only initiated an isotropic disordered domain that enhanced H⁺ dynamics, but also generated an immersive interface that was beneficial for solid electrolyte applications. Finally, we demonstrated the first example of a rechargeable all-solid-state H⁺ battery utilizing the new glassy-state CP, which exhibited a wide operating-temperature range of 25 to 110 °C.

Melt-quenched coordination polymer glass shows exclusive H⁺ conductivity (8.0 × 10⁻³ S cm⁻¹ at 120 °C, anhydrous) and optimal mechanical properties (42.8 Pa s at 120 °C), enables the operation of an all-solid-state proton battery from RT to 110 °C.     

A reconstructed porous copper surface promotes selectivity and efficiency toward C2 products by electrocatalytic CO2 reduction

Electrocatalytic synthesis of multicarbon (C₂₊) products from CO₂ reduction suffers from poor selectivity and low energy efficiency. Herein, a facile oxidation–reduction cycling method is adopted to reconstruct the Cu electrode surface with the help of halide anions. The surface composed of entangled Cu nanowires with hierarchical pores is synthesized in the presence of I⁻, exhibiting a C₂ faradaic efficiency (FE) of 80% at −1.09 V vs. RHE. A partial current density of 21 mA cm⁻² is achieved with a C₂ half-cell power conversion efficiency (PCE) of 39% on this electrode. Such high selective C₂ production is found to mainly originate from CO intermediate enrichment inside hierarchical pores rather than the surface lattice effect of the Cu electrode.

The Cu electrode surface is reconstructed by a halide anion assisted method for promoting CO₂ reduction.     

Semiquinone radical-bridged M2 (M = Fe,Co, Ni) complexes with strong magnetic exchange giving rise to slow magnetic relaxation

The use of radical bridging ligands to facilitate strong magnetic exchange between paramagnetic metal centers represents a key step toward the realization of single-molecule magnets with high operating temperatures. Moreover, bridging ligands that allow the incorporation of high-anisotropy metal ions are particularly advantageous. Toward these ends, we report the synthesis and detailed characterization of the dinuclear hydroquinone-bridged complexes [(Me₆tren)₂M^II₂(C₆H₄O₂²⁻)]²⁺ (Me₆tren = tris(2-dimethylaminoethyl)amine; M = Fe, Co, Ni) and their one-electron-oxidized, semiquinone-bridged analogues [(Me₆tren)₂M^II₂(C₆H₄O₂⁻˙)]³⁺. Single-crystal X-ray diffraction shows that the Me₆tren ligand restrains the metal centers in a trigonal bipyramidal geometry, and coordination of the bridging hydro- or semiquinone ligand results in a parallel alignment of the three-fold axes. We quantify the p-benzosemiquinone–transition metal magnetic exchange coupling for the first time and find that the nickel(ii) complex exhibits a substantial J < −600 cm⁻¹, resulting in a well-isolated S = 3/2 ground state even as high as 300 K. The iron and cobalt complexes feature metal–semiquinone exchange constants of J = −144(1) and −252(2) cm⁻¹, respectively, which are substantially larger in magnitude than those reported for related bis(bidentate) semiquinoid complexes. Finally, the semiquinone-bridged cobalt and nickel complexes exhibit field-induced slow magnetic relaxation, with relaxation barriers of U_eff = 22 and 46 cm⁻¹, respectively. Remarkably, the Orbach relaxation observed for the Ni complex is in stark contrast to the fast processes that dominate relaxation in related mononuclear Ni^II complexes, thus demonstrating that strong magnetic coupling can engender slow magnetic relaxation.

A semiquinone radical bridging two trigonal bipyramidal metal centers facilitates strong magnetic exchange and single-molecule magnet behavior.     

Au3-to-Ag3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(μ-Pz-(i-C₃H₇)₂)]₃·[Ag(μ-Tz-(n-C₃F₇)₂)]₃ (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1^st crystallographically-verified stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M′ (Au → Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol⁻¹ between the two trimer moieties – a large value for intermolecular interactions between adjacent d¹⁰ centres (nearly doubling the value for a recently-claimed Au(i) → Cu(i) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol⁻¹ with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M′ frontier molecular orbitals in such polar-covalent M–M′ bonds in this family of molecules. The Au → Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H₃N: → Ag in [Ag(NH₃)₂]⁺, as demonstrated herein quantitatively. Solid-state and molecular modeling illustrate electron flow from the π-basic gold trimer to the π-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL′CT) and metal-to-ligand (MLCT) charge transfer.

A stacked Ag₃–Au₃ bonded (66 kcal mol⁻¹) complex obtained crystallographically exhibits charge-transfer characteristics arising from multiple cooperative supramolecular interactions.     

Thermodynamics Analysis and Removal of P in a P-(M)-H2O System

In order to efficiently remove phosphorus, thermodynamic equilibrium diagrams of the P-H₂O system and P-M-H₂O system (M stands for Fe, Al, Ca, Mg) were analyzed by software from Visual MINTEQ to identify the existence of phosphorus ions and metal ions as pH ranged from 1 to 14. The results showed that the phosphorus ions existed in the form of H₃PO₄, H₂PO₄⁻, HPO₄²⁻, and PO₄³⁻. Among them, H₂PO₄⁻ and HPO₄²⁻ were the main species in the acidic medium (99% at pH = 5) and alkaline medium (97.9% at pH = 10). In the P-Fe-H₂O system ((P) = 0.01 mol/L, (Fe³⁺) = 0.01 mol/L), H₂PO₄⁻ was transformed to FeHPO₄⁺ at pH = 0–7 due to the existence of Fe³⁺ and then transformed to HPO₄²⁻ at pH > 6 as the Fe³⁺ was mostly precipitated. In the P-Ca-H₂O system ((P) = 0.01 mol/L, (Ca²⁺) = 0.015 mol/L), the main species in the acidic medium was CaH₂PO₄⁺ and HPO₄²⁻, and then transformed to CaPO₄⁻ at pH > 7. In the P-Mg-H₂O system ((P) = 0.01 mol/L, (Mg²⁺) = 0.015 mol/L), the main species in the acidic medium was H₂PO₄⁻ and then transformed to MgHPO₄ at pH = 5–10, and finally transformed to MgPO₄⁻ as pH increased. The verification experiments (precipitation experiments) with single metal ions confirmed that the theoretical analysis could be used to guide the actual experiments.     

Expanding the Ligand Classes Used for Mn(II) Complexation: Oxa-aza Macrocycles Make the Difference

We report two macrocyclic ligands based on a 1,7-diaza-12-crown-4 platform functionalized with acetate (tO2DO2A²⁻) or piperidineacetamide (tO2DO2AM^Pip) pendant arms and a detailed characterization of the corresponding Mn(II) complexes. The X−ray structure of [Mn(tO2DO2A)(H₂O)]·2H₂O shows that the metal ion is coordinated by six donor atoms of the macrocyclic ligand and one water molecule, to result in seven-coordination. The Cu(II) analogue presents a distorted octahedral coordination environment. The protonation constants of the ligands and the stability constants of the complexes formed with Mn(II) and other biologically relevant metal ions (Mg(II), Ca(II), Cu(II) and Zn(II)) were determined using potentiometric titrations (I = 0.15 M NaCl, T = 25 °C). The conditional stabilities of Mn(II) complexes at pH 7.4 are comparable to those reported for the cyclen-based tDO2A²⁻ ligand. The dissociation of the Mn(II) chelates were investigated by evaluating the rate constants of metal exchange reactions with Cu(II) under acidic conditions (I = 0.15 M NaCl, T = 25 °C). Dissociation of the [Mn(tO2DO2A)(H₂O)] complex occurs through both proton− and metal−assisted pathways, while the [Mn(tO2DO2AM^Pip)(H₂O)] analogue dissociates through spontaneous and proton-assisted mechanisms. The Mn(II) complex of tO2DO2A²⁻ is remarkably inert with respect to its dissociation, while the amide analogue is significantly more labile. The presence of a water molecule coordinated to Mn(II) imparts relatively high relaxivities to the complexes. The parameters determining this key property were investigated using ¹⁷O NMR (Nuclear Magnetic Resonance) transverse relaxation rates and ¹H nuclear magnetic relaxation dispersion (NMRD) profiles.     

Coordination polymer glass from a protic ionic liquid: proton conductivity and mechanical properties as an electrolyte

High proton conducting electrolytes with mechanical moldability are a key material for energy devices. We propose an approach for creating a coordination polymer (CP) glass from a protic ionic liquid for a solid-state anhydrous proton conductor. A protic ionic liquid (dema)(H₂PO₄), with components which also act as bridging ligands, was applied to construct a CP glass (dema)_0.35[Zn(H₂PO₄)_2.35(H₃PO₄)_0.65]. The structural analysis revealed that large Zn–H₂PO₄⁻/H₃PO₄ coordination networks formed in the CP glass. The network formation results in enhancement of the properties of proton conductivity and viscoelasticity. High anhydrous proton conductivity (σ = 13.3 mS cm⁻¹ at 120 °C) and a high transport number of the proton (0.94) were achieved by the coordination networks. A fuel cell with this CP glass membrane exhibits a high open-circuit voltage and power density (0.15 W cm⁻²) under dry conditions at 120 °C due to the conducting properties and mechanical properties of the CP glass.

A proton-conducting coordination polymer glass derived from a protic ionic liquid works as a moldable solid electrolyte and the anhydrous fuel cell showed I–V performance of 0.15 W cm⁻² at 120 °C.     

Delocalization tunable by ligand substitution in [L2Al]n− complexes highlights a mechanism for strong electronic coupling

Ligand-based mixed valent (MV) complexes of Al(iii) incorporating electron donating (ED) and electron withdrawing (EW) substituents on bis(imino)pyridine ligands (I₂P) have been prepared. The MV states containing EW groups are both assigned as Class II/III, and those with ED functional groups are Class III and Class II/III in the (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ charge states, respectively. No abrupt changes in delocalization are observed with ED and EW groups and from this we infer that ligand and metal valence p-orbitals are well-matched in energy and the absence of LMCT and MLCT bands supports the delocalized electronic structures. The MV ligand charge states (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ show intervalence charge transfer (IVCT) transitions in the regions 6850–7740 and 7410–9780 cm⁻¹, respectively. Alkali metal cations in solution had no effect on the IVCT bands of [(I₂P²⁻)(I₂P³⁻)Al]²⁻ complexes containing –PhNMe₂ or –PhF₅ substituents. Minor localization of charge in [(I₂P²⁻)(I₂P³⁻)Al]²⁻ was observed when –PhOMe substituents are included.

Organo-aluminum mixed-valent complexes combine properties of both organic and transition element mixed-valent compounds. This supports delocalized electronic structures that are structurally and electronically tunable.     

Polymerization Isomerism in Co-M (M = Cu,Ag, Au) Carbonyl Clusters: Synthesis,Structures and Computational Investigation

The reaction of [Co(CO)₄]⁻ (1) with M(I) compounds (M = Cu, Ag, Au) was reinvestigated unraveling an unprecedented case of polymerization isomerism. Thus, as previously reported, the trinuclear clusters [M{Co(CO)₄}₂]⁻ (M = Cu, 2; Ag, 3; Au, 4) were obtained by reacting 1 with M(I) in a 2:1 molar ratio. Their molecular structures were corroborated by single-crystal X-ray diffraction (SC-XRD) on isomorphous [NEt₄][M{Co(CO)₄}₂] salts. [NEt₄](3)represented the first structural characterization of 3. More interestingly, changing the crystallization conditions of solutions of 3, the hexanuclear cluster [Ag₂{Co(CO)₄}₄]²⁻ (5) was obtained in the solid state instead of 3. Its molecular structure was determined by SC-XRD as Na₂(5)·C₄H₆O₂, [PPN]₂(5)·C₅H₁₂ (PPN = N(PPh₃)₂]⁺), [NBu₄]₂(5) and [NMe₄]₂(5) salts. 5 may be viewed as a dimer of 3 and, thus, it represents a rare case of polymerization isomerism (that is, two compounds having the same elemental composition but different molecular weights) in cluster chemistry. The phenomenon was further studied in solution by IR and ESI-MS measurements and theoretically investigated by computational methods. Both experimental evidence and density functional theory (DFT) calculations clearly pointed out that the dimerization process occurs in the solid state only in the case of Ag, whereas Cu and Au related species exist only as monomers.     

Highly efficient H2S scavengers via thiolysis of positively-charged NBD amines

H₂S is a well-known toxic gas and also a gaseous signaling molecule involved in many biological processes. Advanced chemical tools that can regulate H₂S levels in vivo are useful for understanding H₂S biology as well as its potential therapeutic effects. To this end, we have developed a series of 7-nitro-1,2,3-benzoxadiazole (NBD) amines as potential H₂S scavengers. The kinetic studies of thiolysis reactions revealed that incorporation of positively-charged groups onto the NBD amines greatly increased the rate of the H₂S-specific thiolysis reaction. We demonstrate that these reactions proceed effectively, with second order rate constants (k₂) of >116 M⁻¹ s⁻¹ at 37 °C for NBD-S8. Additionally, we demonstrate that NBD-S8 can effectively scavenge enzymatically-produced and endogenous H₂S in live cells. Furthering the biological significance, we demonstrate NBD-S8 mediates scavenging of H₂S in mice.

We demonstrate that positively-charged NBD amines can effectively scavenge biological H₂S in live cells and in mice.     

Dual Ag/Co cocatalyst synergism for the highly effective photocatalytic conversion of CO2 by H2O over Al-SrTiO3

Loading Ag and Co dual cocatalysts on Al-doped SrTiO₃ (AgCo/Al-SrTiO₃) led to a significantly improved CO-formation rate and extremely high selectivity toward CO evolution (99.8%) using H₂O as an electron donor when irradiated with light at wavelengths above 300 nm. Furthermore, the CO-formation rate over AgCo/Al-SrTiO₃ (52.7 μmol h⁻¹) was a dozen times higher than that over Ag/Al-SrTiO₃ (4.7 μmol h⁻¹). The apparent quantum efficiency for CO evolution over AgCo/Al-SrTiO₃ was about 0.03% when photoirradiated at a wavelength at 365 nm, with a CO-evolution selectivity of 98.6% (7.4 μmol h⁻¹). The Ag and Co cocatalysts were found to function as reduction and oxidation sites for promoting the generation of CO and O₂, respectively, on the Al-SrTiO₃ surface.

Deposition Ag and Co dual cocatalysts onto Al-SrTiO₃ significantly improves its activity for photoreduction of CO₂ by H₂O, with extremely high selectivity to CO evolution (99.8%), in which Ag and Co enable CO₂ reduction and H₂O oxidation, respectively.     

Self-Assembly of Antiferromagnetically-Coupled Copper(II) Supramolecular Architectures with Diverse Structural Complexities

The self-assembly of 2,6-diformyl-4-methylphenol (DFMP) and 1-amino-2-propanol (AP)/2-amino-1,3-propanediol (APD) in the presence of copper(II) ions results in the formation of six new supramolecular architectures containing two versatile double Schiff base ligands (H₃L and H₅L1) with one-, two-, or three-dimensional structures involving diverse nuclearities: tetranuclear [Cu₄(HL²⁻)₂(N₃)₄]·4CH₃OH·56H₂O (1) and [Cu₄(L³⁻)₂(OH)₂(H₂O)₂] (2), dinuclear [Cu₂(H₃L1²⁻)(N₃)(H₂O)(NO₃)] (3), polynuclear {[Cu₂(H₃L1²⁻)(H₂O)(BF₄)(N₃)]·H₂O}_n (4), heptanuclear [Cu₇(H₃L1²⁻)₂(O)₂(C₆H₅CO₂)₆]·6CH₃OH·44H₂O (5), and decanuclear [Cu₁₀(H₃L1²⁻)₄(O)₂(OH)₂(C₆H₅CO₂)₄] (C₆H₅CO₂)₂·20H₂O (6). X-ray studies have revealed that the basic building block in 1, 3, and 4 is comprised of two copper centers bridged through one μ-phenolate oxygen atom from HL²⁻ or H₃L1²⁻, and one μ-1,1-azido (N₃⁻) ion and in 2, 5, and 6 by μ-phenoxide oxygen of L³⁻ or H₃L1²⁻ and μ-O²⁻ or μ₃-O²⁻ ions. H-bonding involving coordinated/uncoordinated hydroxy groups of the ligands generates fascinating supramolecular architectures with 1D-single chains (1 and 6), 2D-sheets (3), and 3D-structures (4). In 5, benzoate ions display four different coordination modes, which, in our opinion, is unprecedented and constitutes a new discovery. In 1, 3, and 5, Cu(II) ions in [Cu₂] units are antiferromagnetically coupled, with J ranging from −177 to −278 cm⁻¹.     

MWCNT Decorated Rich N-Doped Porous Carbon with Tunable Porosity for CO2 Capture

Designing of porous carbon system for CO₂ uptake has attracted a plenty of interest due to the ever-increasing concerns about climate change and global warming. Herein, a novel N rich porous carbon is prepared by in-situ chemical oxidation polyaniline (PANI) on a surface of multi-walled carbon nanotubes (MWCNTs), and then activated with KOH. The porosity of such carbon materials can be tuned by rational introduction of MWCNTs, adjusting the amount of KOH, and controlling the pyrolysis temperature. The obtained M/P-0.1-600-2 adsorbent possesses a high surface area of 1017 m² g⁻¹ and a high N content of 3.11 at%. Such M/P-0.1-600-2 adsorbent delivers an enhanced CO₂ capture capability of 2.63 mmol g⁻¹ at 298.15 K and five bars, which is 14 times higher than that of pristine MWCNTs (0.18 mmol g⁻¹). In addition, such M/P-0.1-600-2 adsorbent performs with a good stability, with almost no decay in a successive five adsorption-desorption cycles.     

On the electronic structure and hydrogen evolution reaction activity of platinum group metal-based high-entropy-alloy nanoparticles

We report the synthesis of high-entropy-alloy (HEA) nanoparticles (NPs) consisting of five platinum group metals (Ru, Rh, Pd, Ir and Pt) through a facile one-pot polyol process. We investigated the electronic structure of HEA NPs using hard X-ray photoelectron spectroscopy, which is the first direct observation of the electronic structure of HEA NPs. Significantly, the HEA NPs possessed a broad valence band spectrum without any obvious peaks. This implies that the HEA NPs have random atomic configurations leading to a variety of local electronic structures. We examined the hydrogen evolution reaction (HER) and observed a remarkably high HER activity on HEA NPs. At an overpotential of 25 mV, the turnover frequencies of HEA NPs were 9.5 and 7.8 times higher than those of a commercial Pt catalyst in 0.05 M H₂SO₄ and 1.0 M KOH electrolytes, respectively. Moreover, the HEA NPs showed almost no loss during a cycling test and were much more stable than the commercial Pt catalyst. Our findings on HEA NPs may provide a new paradigm for the design of catalysts.

RuRhPdIrPt high-entropy-alloy nanoparticles with a broad and featureless valence band spectrum show high hydrogen evolution reaction activity.