Synthesis and Characterization of a Magnesium Boryl and a Beryllium‐Substituted Diazaborole

Reaction of a lithium boryl, [(THF)₂Li{B(DAB)}] (DAB=[(DipNCH)₂]^2?, Dip=2,6‐diisopropylphenyl), with a dinuclear magnesium(I) compound [{(^MesNacnac)Mg}₂] (^MesNacnac=[HC(MeCNMes)₂]^?, Mes=mesityl) unexpectedly afforded a rare example of a terminal magnesium boryl species, [(^MesNacnac)(THF)Mg{B(DAB)}]. Attempts to prepare the magnesium boryl via a salt metathesis reaction between the lithium boryl and a β‐diketiminato magnesium iodide compound, instead led to an intractable mixture of products. Similarly, reaction of the lithium boryl with a β‐diketiminato beryllium bromide precursor, [(^DepNacnac)BeBr] (Dep=2,6‐diethylphenyl) did not give a beryllium boryl, but instead afforded an unprecedented example of a beryllium substituted diazaborole heterocycle, [{(^DepNacnac)Be(4‐DAB^?H)}BBr]. For sake of comparison, the same group 2 halide precursor compounds were treated with a potassium gallyl analogue of the lithium boryl, viz. [(tmeda)K{:Ga(DAB)}] (tmeda=N,N,N’,N’‐tetramethylethylenediamine), but no reactions were observed.     

β‐Diketiminate‐Stabilized Magnesium(I) Dimers and Magnesium(II) Hydride Complexes: Synthesis,Characterization, Adduct Formation,and Reactivity Studies

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating β‐diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)₂CH]^? (Ar=phenyl, (^PhNacnac), mesityl (^MesNacnac), or 2,6‐diisopropylphenyl (Dipp, ^DippNacnac)), [(DippNCtBu)₂CH]^? (^tBuNacnac), and [(DippNCMe)(Me₂NCH₂CH₂NCMe)CH]^? (^DmedaNacnac) are reported. The complexes [(^PhNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(OEt₂)], [(^DmedaNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(thf)], [(^DippNacnac)MgI(thf)], [(^tBuNacnac)MgI], and [(^tBuNacnac)MgI(DMAP)] (DMAP=4‐dimethylaminopyridine) were shown to be monomeric by X‐ray crystallography. In addition, the related β‐diketiminato beryllium and calcium iodide complexes, [(^MesNacnac)BeI] and [{(^DippNacnac)CaI(OEt₂)}₂] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)]. The reduction of a 1:1 mixture of [(^DippNacnac)MgI(OEt₂)] and [(^MesNacnac)MgI(OEt₂)] with potassium gave a low yield of the crystallographically characterized complex [(^DippNacnac)Mg(μ‐H)(μ‐I)Mg(^MesNacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [(^MesNacnac)BeI], [{(^DippNacnac)CaI(OEt₂)}₂], or [{(^tBuNacnac)CaI(thf)}₂] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [(^MesNacnac)Mg(L)Mg(L)(^MesNacnac)] (L=THF or DMAP), [(^MesNacnac)Mg(μ‐AdN₆Ad)Mg(^MesNacnac)] (Ad=1‐adamantyl), [(^tBuNacnac)Mg(μ‐AdN₆Ad)Mg(^tBuNacnac)], and [(^MesNacnac)Mg(μ‐tBu₂N₂C₂O₂)Mg(^MesNacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [(^tBuNacnac)Mg(μ‐H)₂Mg(^tBuNacnac)] has shown the compound to have different structural and physical properties to [(^tBuNacnac)MgMg(^tBuNacnac)]. Treatment of the former with DMAP has given [(^tBuNacnac)Mg(H)(DMAP)], the X‐ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [(^MesNacnac)Mg(μ‐H)₂Mg(^MesNacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [(^MesNacnac)MgMg(^MesNacnac)] confirmed that the compound is devoid of hydride ligands.     

Activation of Ethylene by N-Heterocyclic Carbene Coordinated Magnesium(I) Compounds

Reactions of a series of magnesium(I) compounds with ethylene, in the presence of an N-heterocyclic carbene (NHC), have been explored. Treating [{(^MesNacnac)Mg}₂] (^MesNacnac=[HC(MeCNMes)₂]⁻, Mes=mesityl) with an excess of ethylene in the presence of two equivalents of :C{(MeNCMe)₂} (TMC) leads to the formal reductive coupling of ethylene, and formation of the 1,2-dimagnesiobutane complex, [{(^MesNacnac)(TMC)Mg}₂(μ-C₄H₈)]. In contrast, when the reaction is repeated in the presence of three equivalents of TMC, a mixture of the β-diketiminato magnesium ethyl, [(^MesNacnac)(TMC)MgEt], and the NHC coordinated magnesium diamide, [(^MesNacnac^-H)Mg(TMC)₂], results. Four related products, [(^ArNacnac)(TMC)MgEt] (Ar=2,6-dimethylphenyl (Xyl) or 2,6-diisopropylphenyl (Dip)) and [(^ArNacnac^-H)Mg(TMC)₂] (Ar=Xyl or Dip), were similarly synthesised and crystallographically characterized. Computational studies have been employed to investigate the mechanisms of the two observed reaction types, which appear dependent on the substitution pattern of the magnesium(I) compound, and the stoichiometric equivalents of TMC used in the reactions.     

Synthesis of a Hexameric Magnesium 4-pyridyl Complex with Cyclohexane-like Ring Structure via Reductive C-N Activation

The reaction of [{(^Arnacnac)Mg}₂] (^Arnacnac = HC{MeC(NAr)}₂, Ar = 2,6-diisopropylphenyl, Dip, or 2,6-diethylphenyl, Dep) with 4-dimethylaminopyridine (DMAP) at elevated temperatures afforded the hexameric magnesium 4-pyridyl complex [{(^Arnacnac)Mg(4-C₅H₄N)}₆] via reductive cleavage of the DMAP C-N bond. The title compound contains a large s-block organometallic cyclohexane-like ring structure comprising tetrahedral (^Arnacnac)Mg nodes and linked by linear 4-pyridyl bridging ligands, and the structure is compared with other ring systems. [(^Dipnacnac)Mg(DMAP)(NMe₂)] was structurally characterised as a by-product.     

Magnesium(I) Reduction of Aluminum(III) Hydride Complexes: Generation of Mixed Valence Aluminum (AlI/Al0) Hydride Cluster Compounds, [Al6H8(NR3)2{Mg(β-diketiminate)}4]**

Reduction of a range of amido- and aryloxy-aluminum dihydride complexes, e.g. [AlH₂(NR₃){N(SiMe₃)₂}] (NR₃=NMe₃ or N-methylpiperidine (NMP)), with β-diketiminato dimagnesium(I) reagents, [{(^ArNacnac)Mg}₂] (^ArNacnac=[HC(MeCNAr)₂]⁻, Ar=mesityl (Mes) or 2,6-xylyl (Xyl)), have afforded deep red mixed valence aluminum hydride cluster compounds, [Al₆H₈(NR₃)₂{Mg(^ArNacnac)}₄], which have an average Al oxidation state of +0.66, the lowest for any well-defined aluminum hydride compound. In the solid-state, the clusters are shown to have distorted octahedral Al₆ cores, having zero-valent Al axial sites and mono-valent AlH₂⁻ equatorial units. Several novel by-products were isolated from the reactions that gave the clusters, including the Mg−Al bonded magnesio-aluminate complexes, [(^ArNacnac)(Me₃N)Mg−Al(μ-H)₃[{Mg(^ArNacnac)}₂(μ-H)]]. Computational analyses of one aluminum hydride cluster revealed its Al₆ core to be electronically delocalized, and to possess one unoccupied, and six occupied, skeletal molecular orbitals.     

Synthesis,structure, and reactivity of uranium(vi) nitrides

Uranium nitride compounds are important molecular analogues of uranium nitride materials such as UN and UN₂ which are effective catalysts in the Haber–Bosch synthesis of ammonia, but the synthesis of molecular nitrides remains a challenge and studies of the reactivity and of the nature of the bonding are poorly developed. Here we report the synthesis of the first nitride bridged uranium complexes containing U(vi) and provide a unique comparison of reactivity and bonding in U(vi)/U(vi), U(vi)/U(v) and U(v)/U(v) systems. Oxidation of the U(v)/U(v) bis-nitride [K₂{U(OSi(O^tBu)₃)₃(μ-N)}₂], 1, with mild oxidants yields the U(v)/U(vi) complexes [K{U(OSi(O^tBu)₃)₃(μ-N)}₂], 2 and [K₂{U(OSi(O^tBu)₃)₃}₂(μ-N)₂(μ-I)], 3 while oxidation with a stronger oxidant (“magic blue”) yields the U(vi)/U(vi) complex [{U(OSi(O^tBu)₃)₃}₂(μ-N)₂(μ-thf)], 4. The three complexes show very different stability and reactivity, with N₂ release observed for complex 4. Complex 2 undergoes hydrogenolysis to yield imido bridged [K₂{U(OSi(O^tBu)₃)₃(μ-NH)}₂], 6 and rare amido bridged U(iv)/U(iv) complexes [{U(OSi(O^tBu)₃)₃}₂(μ-NH₂)₂(μ-thf)], 7 while no hydrogenolysis could be observed for 4. Both complexes 2 and 4 react with H⁺ to yield quantitatively NH₄Cl, but only complex 2 reacts with CO and H₂. Differences in reactivity can be related to significant differences in the U–N bonding. Computational studies show a delocalised bond across the U–N–U for 1 and 2, but an asymmetric bonding scheme is found for the U(vi)/U(vi) complex 4 which shows a U–N σ orbital well localised to U N and π orbitals which partially delocalise to form the U–N single bond with the other uranium.

The first examples of molecular compounds containing the cyclic (U(vi)N)₂ and (U(v)U(vi)N)₂ cores were obtained by oxidation of the (U(v)U(v)N)₂ analogue. Different bonding within these complexes yields different stability and reactivity with CO and H₂.     

Magnesium–halobenzene bonding: mapping the halogen sigma-hole with a Lewis-acidic complex

Complexes of the Lewis base-free cations (^MeBDI)Mg⁺ and (^tBuBDI)Mg⁺ with Ph–X ligands (X = F, Cl, Br, I) have been studied (^MeBDI = HC[C(Me)N-DIPP]₂ and ^tBuBDI = HC[C(tBu)N-DIPP]₂; DIPP = 2,6-diisopropylphenyl). For the smaller β-diketiminate ligand (^MeBDI) only complexes with PhF could be isolated. Heavier Ph–X ligands could not compete with bonding of Mg to the weakly coordinating anion B(C₆F₅)₄⁻. For the cations with the bulkier ^tBuBDI ligand, the full series of halobenzene complexes was structurally characterized. Crystal structures show that the Mg⋯X–Ph angle strongly decreases with the size of X: F 139.1°, Cl 101.4°, Br 97.7°, I 95.1°. This trend, which is supported by DFT calculations, can be explained with the σ-hole which increases from F to I. Charge calculation and Atoms-In-Molecules analyses show that Mg⋯F–Ph bonding originates from electrostatic attraction between Mg²⁺ and the very polar C^δ+–F^δ− bond. For the heavier halobenzenes, polarization of the halogen atom becomes increasingly important (Cl < Br < I). Complexation with Mg leads in all cases to significant Ph–X bond activation and elongation. This unusual coordination of halogenated species to early main group metals is therefore relevant to C–X bond breaking.

Complexes of a highly Lewis acidic Mg cation and the full series of Ph–X (X = F, Cl, Br, I) have been structurally characterized. The Mg⋯X–Ph angle decreases with halogen size on account of the growing halogen σ-hole.     

Bis[pyrrolyl Ru(ii)] triads: a new class of photosensitizers for metal–organic photodynamic therapy

A new family of ten dinuclear Ru(ii) complexes based on the bis[pyrrolyl Ru(ii)] triad scaffold, where two Ru(bpy)₂ centers are separated by a variety of organic linkers, was prepared to evaluate the influence of the organic chromophore on the spectroscopic and in vitro photodynamic therapy (PDT) properties of the compounds. The bis[pyrrolyl Ru(ii)] triads absorbed strongly throughout the visible region, with several members having molar extinction coefficients (ε) ≥ 10⁴ at 600–620 nm and longer. Phosphorescence quantum yields (Φ_p) were generally less than 0.1% and in some cases undetectable. The singlet oxygen quantum yields (Φ_Δ) ranged from 5% to 77% and generally correlated with their photocytotoxicities toward human leukemia (HL-60) cells regardless of the wavelength of light used. Dark cytotoxicities varied ten-fold, with EC₅₀ values in the range of 10–100 μM and phototherapeutic indices (PIs) as large as 5400 and 260 with broadband visible (28 J cm^–2, 7.8 mW cm^–2) and 625 nm red (100 J cm^–2, 42 mW cm^–2) light, respectively. The bis[pyrrolyl Ru(ii)] triad with a pyrenyl linker (5h) was especially potent, with an EC₅₀ value of 1 nM and PI > 27 000 with visible light and subnanomolar activity with 625 nm light (100 J cm^–2, 28 mW cm^–2). The lead compound 5h was also tested in a tumor spheroid assay using the HL60 cell line and exhibited greater photocytotoxicity in this more resistant model (EC₅₀ = 60 nM and PI > 1200 with 625 nm light) despite a lower dark cytotoxicity. The in vitro PDT effects of 5h extended to bacteria, where submicromolar EC₅₀ values and PIs >300 against S. mutans and S. aureus were obtained with visible light. This activity was attenuated with 625 nm red light, but PIs were still near 50. The ligand-localized ³ππ* state contributed by the pyrenyl linker of 5h likely plays a key role in its phototoxic effects toward cancer cells and bacteria.     

C−H Activation of Inert Arenes using a Photochemically Activated Guanidinato-Magnesium(I) Compound

UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg}₂] 3 (Priso=[(DipN)₂CNPrⁱ₂]⁻, Dip=2,6-diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C−H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg}₂(μ-H)(μ-Ar)] 4 – 9 . In contrast to similar reactions reported for β-diketiminate coordinated counterparts of 3 , these C−H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p-NC₅H₄Bu^t (py^But), gave [(Priso)Mg(py^ButH)(py^But)₂] 10 , presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(py^But⋅)(py^But)₂] 11 , which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C−H activations. One of these involves photochemical cleavage of the Mg−Mg bond of 3 , generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give “Birch-like” products, which subsequently rearrange via C−H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C−H activation process and formation of an alkyl-bridged magnesium(II) species, [{Mg(μ-Priso^−H)}₂] 12 . Furthermore, irradiation of a 1 : 1 mixture of 3 and the β-diketiminato dimagnesium(I) compound, [{(^DipNacnac)Mg}₂] (^DipNacnac=[HC(MeCNDip)₂]⁻), effects a “scrambling” reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg−Mg(^DipNacnac)] 13 . Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.     

Biosynthesis of the catalytic H-cluster of [FeFe] hydrogenase: the roles of the Fe–S maturase proteins HydE,HydF, and HydG

[FeFe] hydrogenases carry out the redox interconversion of protons and molecular hydrogen (2H⁺ + 2e⁻ ⇌ H₂) at a complex Fe–S active site known as the H-cluster. The H-cluster consists of a [4Fe–4S] subcluster, denoted here as [4Fe]_H, linked via a cysteine sulfur to an interesting organometallic [2Fe]_H subcluster thought to be the subsite where the catalysis occurs. This [2Fe]_H subcluster consists of two Fe atoms, linked with a bridging CO and a bridging SCH₂NHCH₂S azadithiolate (adt), with additional terminal CO and CN ligands bound to each Fe. Synthesizing such a complex organometallic unit is a fascinating problem in biochemistry, complicated by the toxic nature of both the CO and CN⁻ species and the relative fragility of the azadithiolate bridge. It has been known for a number of years that this complex biosynthesis is carried out by a set of three essential Fe–S proteins, HydE, HydF, and HydG. HydF is a GTPase, while HydE and HydG are both members of the large family of radical S-adenosylmethionine (rSAM) enzymes. In this perspective we describe the history of research and discovery concerning these three Fe–S “maturase” proteins and describe recent evidence for a sequential biosynthetic pathway beginning with the synthesis of a mononuclear organometallic [Fe(ii)(CO)₂CN(cysteine)] complex by the rSAM enzyme HydG and its subsequent activation by the second rSAM enzyme HydE to form a highly reactive Fe(i)(CO)₂(CN)S species. In our model a pair of these Fe(i)(CO)₂(CN)S units condense to form the [Fe(CO)₂(CN)S]₂ diamond core of the [2Fe]_H cluster, requiring only the installation of the central CH₂NHCH₂ portion of the azadithiolate bridge, whose atoms are all sourced from the amino acid serine. This final step likely occurs with an interplay of HydE and HydF, the details of which yet remain to be elucidated.

Fe–S cluster enzymes HydG, HydE, and HydF provide sequential assembly of the catalytic H-cluster of [FeFe] hydrogenase.     

Catalyst control of selectivity in the C–O bond alumination of biomass derived furans

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp² C–O bond into a sp² C–Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH^‡ = +19.7 (±2.7) kcal mol⁻¹, ΔS^‡ = −18.8 (±7.8) cal K⁻¹ mol⁻¹ and ΔG^‡_{298 K} = +25.3 (±0.5) kcal mol⁻¹ and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp² C–O bond through population of the σ*-orbital. Inclusion of [Pd(PCy₃)₂] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C–O bond that breaks is that adjacent to the sp²C–H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)₂CH}AlH₂] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C–O bond functionalisation occurs via an initial C–H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C–H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C–H bond to the palladium catalyst. Isomerisation of the kinetic C–H aluminated product to the thermodynamic C–O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy₃)₂]. DFT calculations suggest that the key C–O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle.     

Activation of ammonia and hydrazine by electron rich Fe(ii) complexes supported by a dianionic pentadentate ligand platform through a common terminal Fe(iii) amido intermediate

We report the use of electron rich iron complexes supported by a dianionic diborate pentadentate ligand system, B₂Pz₄Py, for the coordination and activation of ammonia (NH₃) and hydrazine (NH₂NH₂). For ammonia, coordination to neutral (B₂Pz₄Py)Fe(ii) or cationic [(B₂Pz₄Py)Fe(iii)]⁺ platforms leads to well characterized ammine complexes from which hydrogen atoms or protons can be removed to generate, fleetingly, a proposed (B₂Pz₄Py)Fe(iii)–NH₂ complex (3_Ar-NH₂). DFT computations suggest a high degree of spin density on the amido ligand, giving it significant aminyl radical character. It rapidly traps the H atom abstracting agent 2,4,6-tri-tert-butylphenoxy radical (ArO˙) to form a C–N bond in a fully characterized product (2_Ar), or scavenges hydrogen atoms to return to the ammonia complex (B₂Pz₄Py)Fe(ii)–NH₃ (1_Ar-NH₃). Interestingly, when (B₂Pz₄Py)Fe(ii) is reacted with NH₂NH₂, a hydrazine bridged dimer, (B₂Pz₄Py)Fe(ii)–NH₂NH₂–Fe(ii)(B₂Pz₄Py) ((1_Ar)₂-NH₂NH₂), is observed at −78 °C and converts to a fully characterized bridging diazene complex, 4_Ar, along with ammonia adduct 1_Ar-NH₃ as it is allowed to warm to room temperature. Experimental and computational evidence is presented to suggest that (B₂Pz₄Py)Fe(ii) induces reductive cleavage of the N–N bond in hydrazine to produce the Fe(iii)–NH₂ complex 3_Ar-NH₂, which abstracts H˙ atoms from (1_Ar)₂-NH₂NH₂ to generate the observed products. All of these transformations are relevant to proposed steps in the ammonia oxidation reaction, an important process for the use of nitrogen-based fuels enabled by abundant first row transition metals.

Synopsis: a highly reactive Fe(iii)–NH₂ complex is generated via activation of ammonia or hydrazine in reactions of relevance to fundamental steps in ammonia oxidation processes mediated by an abundant, first row transition metal.     

Coinage metal aluminyl complexes: probing regiochemistry and mechanism in the insertion and reduction of carbon dioxide

The synthesis of coinage metal aluminyl complexes, featuring M–Al covalent bonds, is reported via a salt metathesis approach employing an anionic Al(i) (‘aluminyl’) nucleophile and group 11 electrophiles. This approach allows access to both bimetallic (1 : 1) systems of the type (^tBu₃P)MAl(NON) (M = Cu, Ag, Au; NON = 4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) and a 2 : 1 di(aluminyl)cuprate system, K[Cu{Al(NON)}₂]. The bimetallic complexes readily insert heteroallenes (CO₂, carbodiimides) into the unsupported M–Al bonds to give systems containing a M(CE₂)Al bridging unit (E = O, NR), with the μ-κ¹(C):κ²(E,E′) mode of heteroallene binding being demonstrated crystallographically for carbodiimide insertion in the cases of all three metals, Cu, Ag and Au. The regiochemistry of these processes, leading to the formation of M–C bonds, is rationalized computationally, and is consistent with addition of CO₂ across the M–Al covalent bond with the group 11 metal acting as the nucleophilic partner and Al as the electrophile. While the products of carbodiimide insertion are stable to further reaction, their CO₂ analogues have the potential to react further, depending on the identity of the group 11 metal. (^tBu₃P)Au(CO)₂Al(NON) is inert to further reaction, but its silver counterpart reacts slowly with CO₂ to give the corresponding carbonate complex (and CO), and the copper system proceeds rapidly to the carbonate even at low temperatures. Experimental and quantum chemical investigations of the mechanism of the CO₂ to CO/carbonate transformation are consistent with rate-determining extrusion of CO from the initially-formed M(CO)₂Al fragment to give a bimetallic oxide that rapidly assimilates a second molecule of CO₂. The calculated energetic barriers for the most feasible CO extrusion step (ΔG^‡ = 26.6, 33.1, 44.5 kcal mol⁻¹ for M = Cu, Ag and Au, respectively) are consistent not only with the observed experimental labilities of the respective M(CO)₂Al motifs, but also with the opposing trends in M–C (increasing) and M–O bond strengths (decreasing) on transitioning from Cu to Au.

The differential reactivity of copper, silver and gold aluminyl compounds towards CO₂ and other heteroallenes are probed by experimental and quantum chemical methods.     

Delocalization tunable by ligand substitution in [L2Al]n− complexes highlights a mechanism for strong electronic coupling

Ligand-based mixed valent (MV) complexes of Al(iii) incorporating electron donating (ED) and electron withdrawing (EW) substituents on bis(imino)pyridine ligands (I₂P) have been prepared. The MV states containing EW groups are both assigned as Class II/III, and those with ED functional groups are Class III and Class II/III in the (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ charge states, respectively. No abrupt changes in delocalization are observed with ED and EW groups and from this we infer that ligand and metal valence p-orbitals are well-matched in energy and the absence of LMCT and MLCT bands supports the delocalized electronic structures. The MV ligand charge states (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ show intervalence charge transfer (IVCT) transitions in the regions 6850–7740 and 7410–9780 cm⁻¹, respectively. Alkali metal cations in solution had no effect on the IVCT bands of [(I₂P²⁻)(I₂P³⁻)Al]²⁻ complexes containing –PhNMe₂ or –PhF₅ substituents. Minor localization of charge in [(I₂P²⁻)(I₂P³⁻)Al]²⁻ was observed when –PhOMe substituents are included.

Organo-aluminum mixed-valent complexes combine properties of both organic and transition element mixed-valent compounds. This supports delocalized electronic structures that are structurally and electronically tunable.     

1,2-Addition and cycloaddition reactions of niobium bis(imido) and oxo imido complexes

The bis(imido) complexes (BDI)Nb(N^tBu)₂ and (BDI)Nb(N^tBu)(NAr) (BDI = N,N′-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate; Ar = 2,6-diisopropylphenyl) were shown to engage in 1,2-addition and [2 + 2] cycloaddition reactions with a wide variety of substrates. Reaction of the bis(imido) complexes with dihydrogen, silanes, and boranes yielded hydrido-amido-imido complexes via 1,2-addition across Nb-imido π-bonds; some of these complexes were shown to further react via insertion of carbon dioxide to give formate-amido-imido products. Similarly, reaction of (BDI)Nb(N^tBu)₂ with tert-butylacetylene yielded an acetylide-amido-imido complex. In contrast to these results, many related mono(imido) Nb BDI complexes do not exhibit 1,2-addition reactivity, suggesting that π-loading plays an important role in activating the Nb–N π-bonds toward addition. The same bis(imido) complexes were also shown to engage in [2 + 2] cycloaddition reactions with oxygen- and sulfur-containing heteroallenes to give carbamate- and thiocarbamate-imido complexes: some of these complexes readily dimerized to give bis-μ-sulfido, bis-μ-iminodicarboxylate, and bis-μ-carbonate complexes. The mononuclear carbamate imido complex (BDI)Nb(NAr)(N(^tBu)CO₂) (12) could be induced to eject tert-butylisocyanate to generate a four-coordinate terminal oxo imido intermediate, which could be trapped as the five-coordinate pyridine or DMAP adduct. The DMAP adducted oxo imido complex (BDI)NbO(NAr)(DMAP) (16) was shown to engage in 1,2-addition of silanes across the Nb-oxo π-bond; this represents a new reaction pathway in group 5 chemistry.

Another slice of pi: the addition of a second π-donor ligand engenders 1,2-addition and [2 + 2] cycloaddition reactivity across Nb-imido and Nb-oxo bonds.     

A Mixed‐Valence Tri‐Zinc Complex, [LZnZnZnL] (L=Bulky Amide), Bearing a Linear Chain of Two‐Coordinate Zinc Atoms

Reduction of a variety of extremely bulky amido Group 12 metal halide complexes, [LMX(THF)_0,1] (L=amide; M=Zn, Cd, or Hg; X=halide) with a magnesium(I) dimer gave a homologous series of two‐coordinate metal(I) dimers, [L′MML′] (L′=N(Ar^?)(SiMe₃), Ar^?=C₆H₂{C(H)Ph₂}₂Prⁱ‐2,6,4); and the formally zinc(0) complex, [L*ZnMg(^MesNacnac)] (L*=N(Ar*)(SiPrⁱ₃); Ar*=C₆H₂{C(H)Ph₂}₂Me‐2,6,4; ^MesNacnac=[(MesNCMe)₂CH]^?, Mes=mesityl), which contains the first unsupported Zn? Mg bond. Two equivalents of [L*ZnMg(^MesNacnac)] react with ZnBr₂ or ZnBr₂(tmeda) to give the mixed valence, two‐coordinate, linear tri‐zinc complex, [L*Zn^IZn⁰Zn^IL*], and the first zinc(I) halide complex, [L*ZnZnBr(tmeda)], respectively. The analogues [L*ZnMZnL*] (M=Cd or Hg), were also prepared, the Cd species contains the first Zn? Cd bond in a molecular compound. Metal–metal bonding was studied by DFT calculations.     

Use of a cyclo-P4 building block – a way to networks of host–guest assemblies

Despite the proven ability to form supramolecular assemblies via coordination to copper halides, organometallic building blocks based on four-membered cyclo-P₄ ligands find only very rare application in supramolecular chemistry. To date, only three types of supramolecular aggregates were obtained based on the polyphosphorus end-deck complexes Cp^RTa(CO)₂(η⁴-P₄) (1a: Cp^R = Cp′′; 1b: Cp^R = Cp′′′), with none of them, however, possessing a guest-accessible void. To achieve this target, the use of silver salts of the weakly coordinating anion SbF₆⁻ was investigated as to their self-assembly in the absence and in the presence of the template molecule P₃Se₄. The two-component self-assembly of the building block 1a and the coinage-metal salt AgSbF₆ leads to the formation of 1D or 3D coordination polymers. However, when the template-driven self-assembly was attempted in the presence of an aliphatic dinitrile, the unprecedented barrel-like supramolecular host–guest assembly P₃Se₄@[{(Cp′′Ta(CO)₂(η⁴-P₄))Ag}₈]⁸⁺ of 2.49 nm in size was formed. Moreover, cyclo-P₄-based supramolecules are connected in a 2D coordination network by dinitrile linkers. The obtained compounds were characterised by mass-spectrometry, ¹H and ³¹P NMR spectroscopy and X-ray structure analysis.

A one-pot self-assembly template-controlled reaction is reported to result in a 2D coordination network of first host-guest assemblies P₃Se₄@[{(Cp′′Ta(CO)₂(η⁴-P₄))Ag}₈]⁸⁺ of 2.49 nm in size based on an organometallic complex with a cyclo-P₄ end-deck.     

N2Phos – an easily made,highly effective ligand designed for ppm level Pd-catalyzed Suzuki–Miyaura cross couplings in water

A new biaryl phosphine-containing ligand from an active palladium catalyst for ppm level Suzuki–Miyaura couplings, enabled by an aqueous micellar reaction medium. A wide array of functionalized substrates including aryl/heteroaryl bromides are amenable, as are, notably, chlorides. The catalytic system is both general and highly effective at low palladium loadings (1000–2500 ppm or 0.10–0.25 mol%). Density functional theory calculations suggest that greater steric congestion in N₂Phos induces increased steric crowding around the Pd center, helping to destabilize the 2 : 1 ligand–Pd(0) complex more for N₂Phos than for EvanPhos (and less bulky ligands), and thereby favoring formation of the 1 : 1 ligand–Pd^o complex that is more reactive in oxidative addition to aryl chlorides.

A new, biaryl phosphine-containing ligand, N₂Phos, forms a 1 : 1 complex with Pd resulting in an active catalyst at the ppm level for Suzuki–Miyaura couplings in water, enabled by an aqueous micellar medium. Notably, aryl chlorides are shown to be amenable substrates.     

Preparation of solvated and/or unsolvated simple and mixed diarylmagnesiums

Arylation of arylmagnesium halides or magnesium halide etherates by aryllithium provides a convenient method of preparing Ar₂Mg(Et₂O)₂ or Ar₂Mg(THF)₂. The ether complexes can be completely desolvated but the THF complexes cannot. Mixed diarylmagnesium tetrahydrofuranates, Ar¹Ar²Mg(THF)₂, although coordinationally saturated, have ¹H and ¹³C NMR spectra which suggest that they are fluxional.     

Rh(i)- and Rh(ii)-catalyzed C–H alkylation of benzylamines with alkenes and its application in flow chemistry

The Rh-catalyzed C–H alkylation of benzylamines with alkenes using a picolinamide derivative as a directing group is reported. Both Rh(i) and Rh(ii) complexes can be used as active catalysts for this transformation. In addition, a flow set up was designed to successfully mimic this process under flow conditions. Several examples are presented under flow conditions and it was confirmed that a flow process is advantageous over a batch process. Deuterium labelling experiments were performed to elucidate the mechanism of the reaction, and the results indicated a possible carbene mechanism for this C–H alkylation process.

Rh(i)- and Rh(ii)-catalyzed C–H alkylation of benzylamines with alkenes using a picolinamide derivative as a directing group is reported under both batch and flow.