In situ Raman monitoring triazole formation from self-assembled monolayers of 1,4-diethynylbenzene on Ag and Au surfaces via "click" cyclization

We prepared acetylenyl-terminated aromatic self-assembled monolayers (SAMs) of 1,4-diethynylbenzene on silver and gold. After the fabrication of pendent acetylenyl SAMs, the formation of triazoles was performed via Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition "click" chemistry. A density functional theory (DFT) calculation of Raman frequencies showed good agreement with our experimental data to provide evidence of the formation of the triazole molecule. Our results indicated that "click" chemistry could be successfully applied to simple aromatic SAMs proximate (<1 nm) to roughened gold surfaces. The reaction process could be monitored in real time by measuring intensity changes of the nu(CC)(free) band in surface-enhanced Raman scattering (SERS) spectra.     

In-plane enyne metathesis and subsequent Diels-Alder reactions on self-assembled monolayers

We report in-plane enyne metathesis and subsequent Diels-Alder reactions on self-assembled monolayers (SAMs) terminating in vinyl and acetylenyl groups on gold. After the formation of SAMs of vinyl and acetylenyl group-containing dithiols on gold, in-plane enyne metathesis of the vinyl and acetylenyl groups, leading to the formation of 1,3-diene, was achieved on the SAMs, and Diels-Alder reactions were then successfully performed with tetracyanoethylene, maleic anhydride, and maleimide. The reactions were confirmed by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry. In-plane enyne metathesis developed herein would offer a versatile platform for the functionalization of surfaces with mild reaction conditions and a high compatibility in functional groups.     

Chemical surface modification of self-assembled monolayers by radical nitroxide exchange reactions

This article describes the application of nitroxide exchange reactions of surface-bound alkoxyamines as a tool for reversible chemical modification of self-assembled monolayers (SAMs). This approach is based on radical chemistry, which allows for introduction of various functional groups and can be used to reversibly introduce functionalities at surfaces. To investigate the scope of this surface chemistry, alkoxyamines with different functionalities were synthesized and were then applied to the immobilization of, for example, dyes, sugars, or biotin. Surface analysis was carried out by contact angle, X-ray photoelectron spectroscopy, and fluorescence microscopy measurements. The results show that this reaction is highly efficient, reversible, and mild and allows for immobilization of various sensitive functional groups. In addition, Langmuir-Blodgett lithography was used to generate structured SAMs. Site-selective immobilization of a fluorescent dye could be achieved by nitroxide exchange reactions.     

Direct adsorption and monolayer self-assembly of acetyl-protected dithiols

The alpha,omega-dithiols, with sulfur-containing groups at both ends of the molecules, can be used to bridge a metallic gap. Functional self-assembled monolayers (SAMs) of these dithiols must "stand up" on the surface and expose one thiol group for further reaction. However, both parallel and upright surface orientations and multilayer formation can occur for alpha,omega-dithiols. We find SAMs deposited directly from acetyl protected dithiols (i.e., with no de-protection step) overcome these problems. We present a systematic study of adsorption kinetics from in situ surface plasmon resonance spectroscopy, X-ray photoelectron spectroscopy, and secondary ion mass spectroscopy of alkane- and oligo(phenylene ethylnylene)-based alpha,omega-dithioacetates on gold.     

Adamantane-Based Tripodal Thioether Ligands Functionalized with a Redox-Active Ferrocenyl Moiety for Self-Assembled Monolayers

Self-assembled monolayers (SAMs) can decorate surfaces with `smart′ functional units possessing reversible stimulus-response behavior for optical, thermal, magnetic or redox-chemical stimuli. An independent performance of individual functional groups in such a film is desirable, which can be, in particular, ensured by fairly large lateral separations between tailgroups in the SAM. Adsorbate molecules with multiple attachment points are very promising in this context owing to their large surface footprint, which covers a surface area exceeding the lateral dimensions of the functional groups. To address these design constraints, novel tridentate long-chain tripodal thioether ligands with central adamantine units and a redox-active ferrocenyl tailgroup, 1-[4-(ferrocenylethynyl)phenyl]-3,5,7-tri[(4-n-octylsulfanyl)phenyl]adamantine (T8) and 1-[4-(ferrocenylethynyl)phenyl]-3,5,7-tri[(4-n-dodecylsulfanyl)phenyl]adamantine (T12), were synthesized and used as tripodal adsorbate molecules for the fabrication of redox-active ferrocenyl-terminated SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy and sum frequency generation spectroscopy. The data suggest that T8 and T12 form almost contamination-free, well-aligned and fairly densely-packed SAMs on Au(111) with laterally separated ferrocenyl units. The SAMs show a homogeneous binding chemistry, an important requirement for high fidelity SAMs. SFG results indicate lateral interactions between neighboring molecules via the long-chain binding units.     

硫醇自组装膜对金电极上吡咯电化学聚合的影响

用电化学聚合法在多种烷基硫醇自组装膜修饰金电极上制备了聚吡咯.通过计时安培法、循环伏安法和交流阻抗技术研究了自组装膜的烷基链长和端基功能团对吡咯聚合过程和性质的影响.当自组装膜较完美时,聚吡咯沉积在自组装膜表面;而当自组装膜有一定缺陷时,吡咯在针孔处成核,然后继续生长并完全覆盖在自组装膜表面.研究结果表明,烷基硫醇的链越短,吡咯聚合越容易;疏水的烷基硫醇自组装膜有利于聚吡咯在电极表面的生长.     

Micro- and nanofabrication of robust reactive arrays based on the covalent coupling of dendrimers to activated monolayers

We report on methods to fabricate robust micro- and nanopatterned platforms, comprising high functional group densities and quasi three-dimensional structures, for possible applications in biochip array technologies. For this purpose, amine-terminated poly(amidoamine) (PAMAM) dendrimers were immobilized via amide linkage formation on 11,11'-dithiobis(N-hydroxysuccinimidylundecanoate) (NHS-C10) self-assembled monolayers (SAMs) on gold surfaces. The coupling reaction and the resulting assemblies were characterized by grazing incidence reflection Fourier transform infrared spectroscopy, contact angle measurements, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy; the obtained surface coverage values were successfully fitted with a Langmuir isotherm. The fraction of unreacted peripheral primary amine groups of the surface-immobilized PAMAM dendrimers was 28% as determined by XPS analysis of trifluoroacetic anhydride-labeled assemblies. Patterning of the PAMAM dendrimers on NHS-C10 SAMs on the micrometer and sub-100-nm scale was achieved by microcontact printing and dip pen nanolithography. The resulting patterns are characterized by their high degree of order and stability of the transferred molecules due to covalent attachment.     

Nanoseeding via dual surface modification of alkyl monolayer for site-controlled electroless metallization

In this work, an attempt to fabricate nanostructured metallization patterns on SiO(2) dielectric layers is made by using plasma-patterned self-assembled monolayers (SAMs), in conjunction with a novel aqueous seeding and electroless process. Taking octadecyltrichlorosilane (OTS) as a test material, the authors demonstrate that optimizing the N(2)-H(2) plasma conditions leads to the successive conversion of the topmost aliphatic chains of alkyl SAMs to carboxyl (COOH) and hydroxyl (C-OH) functional groups, which was previously found in alkyl SAMs only by exposure to "oxygen-based" plasma. Further modifying the plasma-exposed (either COOH or C-OH terminated) regions with an aqueous solution (SC-1) creates surface functionalities that are viable for site-controlled metallic seeding (e.g., Co or Ni) with an adsorption selectivity of greater than 1000:1. Neither the combination of costly PdCl(2) and complex additives nor the demerits of the associated aqueous chemistry (e.g., seed agglomeration and seed sparseness) are involved. Therefore, the seed particles are only 3 nm in size. Simultaneously, there are sufficient particle densities previously unattainable for electroless deposition to trigger highly resolved Cu metallization patterns with a film thickness of less than 10 nm. The formation of the seed-adsorbing sites is discussed, based on a plasma-dissociated, water-mediated chemical oxidation route.     

Ab initio calculations of the reaction mechanisms for metal-nitride deposition from organo-metallic precursors onto functionalized self-assembled monolayers

An atomistic mechanism has been derived for the initial stages of the adsorption reaction for metal-nitride atomic layer deposition (ALD) from alkylamido organometallic precursors of Ti and Zr on alkyltrichorosilane-based self-assembled monolayers (SAMs). The effect of altering the terminal functional group on the SAM (including -OH, -NH2, -SH, and -NH(CH3)) has been investigated using the density functional theory and the MP2 perturbation theory. Reactions on amine-terminated SAMs proceed through the formation of a dative-bond complex with an activation barrier of 16-20 kcal/mol. In contrast, thiol-terminated SAMs form weak hydrogen-bonded intermediates with activation barriers between 7 and 10 kcal/mol. The deposition of Ti organometallic precursors on hydroxyl-terminated SAMs proceeds through the formation of stronger hydrogen-bonded complexes with barriers of 7 kcal/mol. Zr-based precursors form dative-bonded adducts with near barrierless transitions. This variety allows us to select a kinetically favorable substrate for a chosen precursor. The predicted order of reactivity of differently terminated SAMs and the temperature dependence of the initial reaction probability have been confirmed for Ti-based precursors by recent experimental results. We predict that the replacement of methyl groups by trifluoromethyl groups on the SAM backbone decreases the activation barrier for amine-terminated SAMs by 5 kcal/mol. This opens a route to alter the native reactivities of a given SAM termination, in this case making amine termination energetically viable. The surface distribution of SAM molecules has a strong effect on the adsorption kinetics of Ti-based precursors. Unimolecular side decomposition reactions were found to be kinetically competitive with adsorption at 400 K.     

Substrate changes associated with the chemistry of self-assembled monolayers on silicon

Alkylsiloxane self-assembled monolayers (SAMs) are used in the semiconductor industry and, more recently, as proxies for organics adsorbed on airborne mineral dust and on buildings and construction materials. A number of methods have been used for removing the SAM from the substrate after reaction or use, particularly plasmas or piranha (H2SO4/H2O2) solution. However, when the substrates are reused to make new SAMs, the impact of the cleaning methods on the chemistry of subsequently formed SAMs on the surface is not known. Here we report atomic force microscopy, X-ray photoelectron spectroscopy, Auger electron spectroscopy, and Fourier transform infrared studies of changes in a silicon substrate upon repetitive deposition and removal of SAMs by these two methods. It is shown that a thicker layer of silicon oxide is formed, and the surface becomes irregular and roughened, particularly after the piranha treatment. This layer of silica impacts the structure of the SAMs attached to it and can serve as a reservoir for trace gases that adsorb on it, potentially contributing to the subsequent reactions of the SAM. The implications for the use of such surfaces as a proxy for reactions of organics on airborne dust particles and on structures in the boundary layer are discussed.     

Surface plasmon resonance spectroscopy-based high-throughput screening of ligands for use in affinity and displacement chromatography

We describe an approach that uses surface plasmon resonance (SPR) spectroscopy and self-assembled monolayers (SAMs) for the high-throughput screening of ligands for use in displacement and affinity chromatographic processes. We identified a set of commercially available organic amines and allowed them to react with SAMs presenting interchain carboxylic anhydride groups; the resulting surfaces presented ligands of interest in a background of carboxylic acid groups. We used SPR spectroscopy to determine the extent of adsorption of two model proteinslysozyme and cytochrome conto these "multimodal" surfaces and to select promising "affinity" ligands for further characterization. The attachment of selected ligands to UltraLink Biosupport resulted in beads with a significantly greater affinity for lysozyme than for cytochrome c that would be suitable for use in affinity chromatographic processes. Furthermore, we also used the screens to design "affinity displacers"small molecules that selectively retain lysozyme on chromatographic resins, while displacing cytochrome c. The combination of SPR spectroscopy and SAMs represents a powerful technique for identifying novel ligands that enable the purification of complex protein mixtures.     

Peptide-based SAMs that resist the adsorption of proteins

In this paper we present a modular approach for the fabrication of surfaces to characterize protein-protein interactions. The approach is based on azido peptides with an optimized sequence which are then thiol-functionalized using an alkynyl thiol and "click" chemistry. From these peptide thiols we fabricated SAMs on gold to evaluate the protein resistance, using surface plasmon resonance spectroscopy, toward streptavidin, bovin serum albumin (BSA), and fibronectin.     

Maleimido-terminated self-assembled monolayers

Four approaches have been explored for the preparation of maleimido-functionalized self-assembled monolayers (SAMs) on silicon. SAMs prepared by self-assembly of maleimido-functionalized alkyltrichlorosilanes (11-maleimido-undecyl-trichlorosilane) on oxide-covered silicon yield higher signals from maleimido functionalities in ATR-IR (attenuated total reflection IR) spectroscopy and XPS (X-ray photoelectron spectroscopy) than the other three methods. The surface composition of maleimido groups was tailored further by the formation of mixed monolayers with nonfunctionalized alkyltrichlorosilanes (decyltrichlorosilane). The order of the alkyl chains within the monolayers only slightly depends on the composition of the mixed monolayers. We utilized the maleimido-terminated SAMs to bind various nucleophilic compounds, alkylamines, alkylthiols, and thiol-tagged DNA oligonucleotides by means of conjugate addition.     

Mixed azide-terminated monolayers: a platform for modifying electrode surfaces

We have prepared and characterized mixed self-assembled monolayers (SAM) on gold electrodes from azido alkane thiols and various omega-functionalized alkane thiols. In the presence of copper(I) catalysts, these azide-modified surfaces are shown to react rapidly and quantitatively with terminal acetylenes forming 1,2,3-triazoles, via "click" chemistry. The initial azide substituents can be identified and monitored using both grazing-angle infrared (IR) and X-ray photoelectron spectrosopies. Acetylenes possessing redox-active ferrocene substituents react with the azide-terminated mixed SAMs and electrochemical measurements of the ferrocene-modified SAM electrodes have been used to quantify the redox centers attached to these platforms. Time-resolved electrochemical measurements have enabled us to follow the formation of these ferrocene centers and thus to measure the rate of the surface "click" reaction. Under optimal conditions this well-behaved second-order reaction takes place with a rate constant of 1 x 10(3) M(-)(1) s(-)(1). Typical reaction times of several minutes were realized using micromolar concentrations of acetylene. These techniques have been used to construct well-characterized, covalently modified monolayers that can be employed as functional electrode surfaces.     

Platelet compatibility improvement by proper choice of acidic terminal functionality for mixed-charge self-assembled monolayers

In this study two different series of mixed-charge self-assembled monolayers (SAMs) prepared with -N(+)(CH(3))(3)-terminated alkanethiol and strong dissociated monovalent -SO(3)H acid-terminated or weaker dissociated divalent -PO(3)H(2) acid-terminated alkanethiol in pure ethanol were characterized. The influence of the acidity of the anionic functionality in the mixed-charge SAMs on the surface characteristics and platelet compatibility was investigated. X-ray photoelectron spectroscopy indicated that a nearly equivalent amount of countercharged terminal groups was noted on the surface of -SO(3)H/-N(+)(CH(3))(3) mixed SAMs, while "-N(+)(CH(3))(3) thiol poor" phenomena were found on -PO(3)H(2)/-N(+)(CH(3))(3) mixed SAMs instead. This was caused by the distinct differences in solvation capability between the acidic anionic functional groups and solvent molecules and/or the interactions among the terminal ends of the thiols. This acidity difference also affected other interfacial properties and the platelet compatibility. The mixed SAMs formed from the mixture of -SO(3)H- and -N(+)(CH(3))(3)-terminated thiols showed higher surface hydrophilicity and exhibited the least amount of platelets adhered, but these two mixed SAMs were all fairly negatively surface charged. The structure of the hydration layer near the surfaces was likely affected by the acidity of the anionic functionality, and this would cause such a distinct behavior in platelet compatibility. It was concluded that the hydrophilic surfaces with nearly equal amounts of surface positively and negatively charged components could exhibit better platelet compatibility. This work demonstrated that the nature of the acidic terminal ends of alkanethiol is also a key factor for preparing mixed-charge SAMs with good platelet compatibility.     

Immobilization of proteins on carboxylic acid functionalized nanopatterns

The immobilization of proteins on nanopatterned surfaces was investigated using in situ atomic force microscopy (AFM) and ex situ infrared reflectance–absorption spectroscopy (IRAS). The AFM-based lithography technique of nanografting provided control of the size, geometry, and spatial placement of nanopatterns within self-assembled monolayers (SAMs). Square nanopatterns of carboxylate-terminated SAMs were inscribed within methyl-terminated octadecanethiolate SAMs and activated using carbodiimide/succinimide coupling chemistry. Staphylococcal protein A was immobilized on the activated nanopatterns before exposure to rabbit immunoglobulin G. In situ AFM was used to monitor changes in the topography and friction of the nanopatterns in solution upon protein immobilization. Complementary studies with ex situ IRAS confirmed the surface chemistry that occurred during the steps of SAM activation and subsequent protein immobilization on unpatterned samples. Since carbodiimide/succinimide coupling chemistry can be used for surface attachment of different biomolecules, this protocol shows promise for development of other aqueous-based studies for nanopatterned protein immobilization.     

Influence of alkyl chain length on the structure of dialkyldithiophosphinic Acid self-assembled monolayers on gold

We report the formation and characterization of self-assembled monolayers (SAMs) based on dialkyldithiophosphinic acid adsorbates {[CH(3)(CH(2))(n)](2)P(S)SH (n = 5, 9, 11, 13, 15)} on gold substrates. SAMs were characterized using X-ray photoelectron spectroscopy, reflection-absorption infrared spectroscopy, contact angle measurements, and electrochemical impedance spectroscopy. Data show that there is a roughly 60:40 mixture of bidentate and monodentate adsorbates in each of these SAMs. The presence of monodentate adsorbates is due to the numerous and deep grain boundaries of the underlying gold substrate, which disrupt chelation. Comparing the characterization data of dialkyldithiophosphinic acid SAMs with those of analogous n-alkanethiolate SAMs shows that both SAMs follow a similar trend: The alkyl chains become increasingly organized and crystalline with increasing alkyl chain length. The alkyl groups of dialkyldithiophosphinic acid SAMs, however, are generally less densely packed than those of n-alkanethiolate SAMs. For short alkyl chains (hexyl, decyl, and dodecyl), the significantly lower packing densities cause the alkyl chains to be liquid-like and disorganized. Long-chain dialkyldithiophosphinic acid SAMs are only slightly less crystalline than analogous n-alkanethiolate SAMs.     

A nanoengineering approach to regulate the lateral heterogeneity of self-assembled monolayers

Using a scanning probe lithography method known as nanografting in conjunction with knowledge of self-assembly chemistry, regulation of the heterogeneity of self-assembled monolayers (SAMs) is demonstrated. While nanografting in single-component thiols produces areas of SAMs with designed geometry and size, nanofabrication in mixed thiol solution yields segregated domains. The reaction mechanism in nanografting differs significantly from self-assembly in mix-and-grow methods, as proven in systematic studies reported in this article and a companion paper of theoretical calculations of the nanografting process. Knowledge of the reaction pathways enables development of methods for shifting the interplay between the kinetics and thermodynamics in SAM formation, and thus the heterogeneity of mixed SAMs. By varying fabrication parameters, such as shaving speed, and reaction conditions, such as concentration and ratio of the components, the lateral heterogeneity can be adjusted ranging from near molecular mixing to segregated domains of several to tens of nanometers.     

Effect of surface chemical composition on the surface potential and iso-electric point of silicon substrates modified with self-assembled monolayers

Self-assembled monolayer (SAM)-modified nano-materials are a new technology to deliver drug molecules. While the majority of these depend on covalently immobilizing molecules on the surface, it is proposed that electrostatic interactions may be used to deliver drugs. By tuning the surface potential of solid substrates with SAMs, drug molecules could be either absorbed on or desorbed from substrates through the difference in electrostatic interactions around the selected iso-electric point (IEP). In this work, the surface of silicon substrates was tailored with various ratios of 3-aminopropyltrimethoxysilane (APTMS) and 3-mercaptopropyltrimethoxysilane (MPTMS), which form amine- and thiol-bearing SAMs, respectively. The ratio of the functional groups on the silicon surface was quantified by X-ray photoelectron spectrometry (XPS); in general, the deposition kinetics of APTMS were found to be faster than those of MPTMS. Furthermore, for solutions with high MPTMS concentrations, the relative deposition rate of APTMS increased dramatically due to the acid-base reaction in the solution and subsequent electrostatic interactions between the molecules and the substrate. The zeta potential in aqueous electrolytes was determined with an electro-kinetic analyzer. By depositing SAMs of binary functional groups in varied ratios, the surface potential and IEP of silicon substrates could be fine-tuned. For <50% amine concentration in SAMs, the IEP changed linearly with the chemical composition from <2 to 7.18. For higher amine concentrations, the IEP slowly increased with concentration to 7.94 because the formation of hydrogen-bonding suppressed the subsequent protonation of amines.     

Reversible covalent patterning of self-assembled monolayers on gold and silicon oxide surfaces

This paper describes the generation of reversible patterns of self-assembled monolayers (SAMs) on gold and silicon oxide surfaces via the formation of reversible covalent bonds. The reactions of (patterned) SAMs of 11-amino-1-undecanethiol (11-AUT) with propanal, pentanal, decanal, or terephthaldialdehyde result in dense imine monolayers. The regeneration of these imine monolayers to the 11-AUT monolayer is obtained by hydrolysis at pH 3. The (patterned) monolayers were characterized by Fourier transform infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, contact angle and electrochemical measurements, and atomic force microscopy. Imines can also be formed by microcontact printing of amines on terephthaldialdehyde-terminated substrates. Lucifer Yellow ethylenediamine was employed as a fluorescent amine-containing marker to visualize the reversible covalent patterning on a terephthaldialdehyde-terminated glass surface by confocal microscopy. These experiments demonstrate that with reversible covalent chemistry it is possible to print and erase chemical patterns on surfaces repeatedly.