电致变色型导电聚苯胺固态超级电容器的构建与性能研究

以苯胺硫酸溶液为沉积液,导电玻璃(FTO)为基底材料,在-0.2~1.2 V范围内先电位扫描一圈生成聚苯胺(PANI)晶种,然后在-0.2~0.8 V范围内用循环伏安法电沉积导电PANI材料.所得样品用红外光谱和扫描电子显微镜进行结构表征;以最佳循环伏安电沉积条件制备的PANI/FTO为活性电极,以H_2SO_4/聚乙烯醇(H2SO4/PVA)为凝胶电解质组装了电化学电容器,通过循环伏安、恒电流充放电和电化学阻抗法研究了组装电化学电容器的电化学性能.研究结果表明,以H_2SO_4/PVA凝胶电解质,沉积于导电玻璃表面的PANI活性电极材料的面比电容可达172.7 m F/cm~2,并且在2000次充放电以后,比电容值仍可保留初始值的92.8%.以分区沉积有PANI的导电玻璃可组装制备通过变色显示充放电过程的电化学电容器,在充电时,其颜色逐渐从浅绿色向深绿色转变,放电时,颜色逐渐从深绿色向浅绿色转变.     

纳米纤维聚苯胺在电化学电容器中的应用

采用脉冲电流方法（PGM）合成了具有纳米纤维结构的导电聚苯胺（PANI）.扫描电子显微镜对膜层观察表明, PANI膜是由直径约为100 nm的掺杂态聚苯胺纤维交织而成.以纳米纤维状聚苯胺组成电化学电容器,研究了其电化学电容性能,并与恒电流方法（GM） 制备的颗粒状PANI电容器性能进行了比较.结果表明,在相同的沉积电量下,PGM制备的纳米纤维状PANI电化学电容器比颗粒状PANI电化学电容器具有更大的电容容量,其电化学电容器的比电容可高达699 F•g－1,能量密度为54.6 Wh•kg－1.并且该电化学电容器具有良好的充放电性能和循环寿命.     

石墨烯-ITO复合电极对聚苯胺薄膜电致变色性质的影响

采用改进的Hummers法制备氧化石墨烯(GO),首先,石墨与浓硫酸、过硫酸钾和五氧化二磷反应制得强氧化产物,随后将其与浓硫酸、硝酸钠、高锰酸钾反应,经双氧水发泡、酸洗、超声等合成氧化石墨烯水溶液,再通过金属箔还原和基底转移过程制备GO-氧化铟锡(ITO)复合电极材料.通过金属箔还原和基底转移过程制备GO-氧化铟锡(ITO)复合电极材料.利用电化学聚合法在GO-ITO复合电极上制备聚苯胺(PANI)薄膜,并对其形貌结构、电化学及电致变色性质进行表征.结果表明,与ITO电极相比,采用GO-ITO复合电极制备的PANI的成膜性得到明显改善,复合电极具有更加均匀细致的颗粒表面,增大了聚合物与电解液之间的接触面积,为电致变色过程中平衡离子的注入/脱出提供了更多的通道,因而PANI薄膜在700nm处的光学对比度提高了约13%,响应速度缩短了约2.6 s,着色效率高达169.6 cm2/C.GO的引入保持了PANI良好的电化学稳定性.GO-ITO复合电极有效改善了聚合物的综合性能,对于聚合物电致变色材料及器件的开发具有潜在的应用前景.     

铂修饰超细纤维聚苯胺在葡萄糖生物传感方面的应用

在不锈钢电极(SS)表面制得超细纤维状聚苯胺(superfine-fibrous PANI),经Pt微粒修饰后得到Pt微粒超细纤维聚苯胺复合电极[Pt／(superfine-fibrous PANI)／SS]。结果表明,直径50-100nm的Pt微粒均匀分布于直径约100nm的聚苯胺纤维上;Pt／(superfine-fibrous PANI)／SS电极对H2O2氧化具有很好的电催化活性。采用脉冲电流法(PGM)再将葡萄糖氧化酶(GOD)与间苯二胺(MPD)混合共聚嵌于Pt／(superilnefibrous PANI)／SS电极表面,获得了具有优异生物电化学传感特性的葡萄糖氧化酶电极。该酶电极最大响应电流密度im=917．4μA／cm^2,米氏常数K=9．339mmol／L;酶电极对葡萄糖响应快,对尿酸和抗坏血酸有很好的抗干扰性能。     

还原氧化石墨烯表面聚苯胺纳米阵列的制备及电化学电容性能

本文以阳极氧化铝(AAO)膜为模板,通过恒电位法在自组装还原氧化石墨烯(rGO)膜表面制备有序聚苯胺(PANI)纳米线阵列。通过拉曼光谱和场发射扫描电子显微镜分别对其结构和微观形貌进行了表征,并对PANI纳米线阵列的电化学电容性能进行了测试。结果表明,rGO膜表面可电沉积PANI,电沉积得到的PANI纳米线阵列具有比PANI薄膜材料更高的电容和比电容。     

有机化学接枝-电化学沉积聚合制备CNTs/PANI纳米复合材料

通过有机化学合成法先在碳纳米管表面接枝上苯胺单体,然后在不锈钢电极表面在硫酸溶液中采用循环伏安法电化学沉积聚合制得碳纳米管/聚苯胺(CNTs/PANI)纳米复合材料.扫描电子显微镜和傅立叶变换红外光谱表征所得材料的微观结构和基团,循环伏安和恒流充放电测试用于考察所得CNTs/PANI纳米复合材料的电化学性能.所得结果与...     

聚苯胺/碳纳米纤维复合材料的制备及电容性能

采用原位聚合法制备了聚苯胺/碳纳米纤维(PANI/CNF)复合材料,用傅里叶变换红外(FT-IR)光谱、热重分析(TGA)、扫描电镜(SEM)和孔分布及比表面积测定仪研究了复合材料的表面官能团、组成、表面形貌及比表面积,并运用循环伏安(CV)法和计时电位法测试了PANI/CNF布作为电极材料的电化学性能.研究结果表明:PANI/CNF复合材料具有粗糙的毛刺结构,PANI沿碳纳米纤维均匀分布;PANI/CNF电极氧化还原反应的可逆性良好;在100mA·g-1电流密度下,当PANI含量为44.4%(w)时,复合材料比电容量高达587.1F·g-1,比能量为66.1Wh·kg-1,电流密度为800mA·g-1时比功率可达1014.2W·kg-1;在5A·g-1的电流密度下,1000次循环充放电后,复合材料的比电容量衰减28%.PANI/CNF复合材料具有良好的导电性和快速充放电能力,是一种优良的超级电容器电极材料.     

纳米纤维聚苯胺膜在不锈钢电极表面的生长过程

研究了脉冲电流法(PGM)聚合苯胺时, 纳米纤维聚苯胺(PANI)膜在不锈钢(SS)电极表面的生长过程. 用计时电位法和扫描电子显微镜(SEM)表征了聚苯胺生长过程的电化学特征和微观形貌; 并通过循环伏安(CV)法研究了苯胺的聚合速率. 结果表明, 聚苯胺的生长经历了两个阶段, 首先是在裸不锈钢电极表面上形成颗粒状聚苯胺, 此时聚合电位约为1.10 V, 经历了30 s后, 电极表面被一层颗粒状聚苯胺膜所覆盖; 在此基础上, 聚苯胺以纳米纤维状结构继续生长, 当颗粒状聚苯胺被纳米纤维状聚苯胺膜完全覆盖时, 聚合电位降至0.75 V左右并保持稳定.     

碳纳米管网/聚苯胺复合材料的制备及电化学储能性能

分别采用粉末碳纳米管(CNT)和带连接点的碳纳米管网(CNTN)为模板,通过与聚苯胺(PANI)有限域聚合得到了CNT/PANI和CNTN/PANI 2种复合材料.采用透射电子显微镜和扫描电子显微镜对材料的形貌进行了表征,采用氮气吸附-脱附分析研究了材料的孔结构参数,运用双电四探针测试仪对材料的导电性能进行了测试,利用恒流充放电、循环伏安、循环寿命及交流阻抗等电化学测试手段表征了材料的电化学储能性能.结果表明,CNTN/PANI复合材料比CNT/PANI复合材料表现出更好的导电性能和电化学储能性能,其放电比容量可达到143.2 F/g(有机电解液).     

自支撑三维功能化石墨烯/聚苯胺电极材料的制备及超级电容性能

采用水热法制备了三维石墨烯(3D-G),并以十八胺(ODA)为接枝剂对部分还原的氧化石墨烯进行氨基化处理,再利用原位聚合法在氨基化石墨烯表面生长聚苯胺,制备了十八胺功能化石墨烯/聚苯胺(G-ODA/PANI).对材料进行了结构表征、电化学性能分析和材料结构的比电容贡献分析.结果显示,电极材料的电容贡献大部分体现为材料的表面电容,G-ODA/PANI电极片在1 A/g电流密度时的比电容最高可达1080 F/g,是未功能化石墨烯/聚苯胺电极材料(G/PANI)的2.57倍,且循环稳定性也有很大的提高,循环10000周后的比容量保持率为90.8%,比G/PANI高9.6%.     

脉冲电流法电解合成聚苯胺

在0.2mol/L苯胺和0.5mol/LH₂SO₄介质中采用脉冲电流法电解合成聚苯胺(PANI)膜.循环伏安研究表明,与恒电流法相比,脉冲电流法制得的PANI膜具有更好的电化学活性.扫描电镜(SEM)对膜层的微观形貌观察发现,这种特殊的聚苯胺膜层呈纳米纤维状结构,不同于恒电流法制取的颗粒状PANI膜.讨论了脉冲通断比和频率对于膜层性能的影响.     

A comparative study on the viscoelasticity and morphology of polyaniline films galvanostatically grown on bare and 4-aminothiophenol-modified gold electrodes using an electrochemical quartz crystal impedance system and SEM.

The equivalent-circuit parameters of the 9-MHz piezoelectric quartz crystal (PQC) resonance were measured in situ during the galvanostatic polymerization of aniline on 4-aminothiophenol(4-ATP)-modified and bare Au electrodes for ca. 2000 s, respectively. Two polymerization media, 0.100 mol L-1 aniline in 1.0 mol L-1 H2SO4 and in 2.0 mol L-1 HClO4 aqueous solutions, and two values of the current density, 12 and 36 microA cm-2, were used. At identical levels of the resonant frequency shifts in the solutions, obviously greater increases in the motional resistance (R1) were found after aniline polymerization on bare Au electrodes, though the absolute values of delta f0/delta R1 were all large; also, the resonant frequency shifts in air (delta f0g) were considerably smaller for PANI films grown on bare Au electrodes. It is thus concluded that, under identical polymerization conditions, (1) the PANI film grown on a bare gold electrode is rougher, less compact, and can entrap solution more notably; (2) the deposition efficiency of PANI is higher on a 4-ATP-modified Au electrode, owing to a significantly greater observed "dry" frequency shift, and thus a greater "net" mass value of the polyaniline backbone. SEM observations have confirmed that PANI films on 4-ATP-modified Au electrodes were smoother and more compact than those grown on bare Au ones under identical polymerization conditions. In addition, a technique of simultaneous measurements of the electroacoustic admittance of the PQC resonance and the electrochemical impedance was used to monitor the adsorption of 4-ATP onto a PQC gold electrode.     

A Polyaniline-Deposited Nonplatinum Metal as a Potentiometric Sensor—An Inexpensive Alternate to Conventional Platinum for Some Potentiometric Redox Reactions

For the purpose of employing an inexpensive alternative to conventional platinum for use by upper-division as well as graduate students, polyaniline (PANI)-deposited stainless steel (SS) and mild steel (MS) electrodes are described as indicator electrodes for potentiometry and potentiometric titrations of some redox reactions. PANI is deposited on the nonplatinum metal by electrochemical polymerization of aniline using cyclic voltammetric technique. Alternate methods to produce the PANI electrodes are also suggested. The electrodes respond to concentration changes of hydroquinone (H₂O), Fe²⁺/Fe³⁺, and [Fe(CN)₆]^4–/[Fe(CN)₆]^3– in HCL electrolytes, and the potential variation with concentration follows the Nernst relationship. Under identical experimental conditions, the response time of the PANI/SS, PANI/MS, and Pt electrodes for a change in concentration of Fe³⁺ in a mixed electrolyte of Fe²⁺ and Fe³⁺ is found to be about 20 s. Neutralization reaction of HC1 versus NaOH, redox reaction of Fe²⁺ and Ce⁴⁺, and redox reaction of Fe²⁺ and KMnO₄ in several concentrations in the range from 1 mM to 100 mM are carried out using the PANI/SS, PANI/MS, and Pt indicator electrodes. The performance of the PANI/SS and PANI/MS electrodes is as good as that of the Pt at all concentration levels of the titrations. The electrodes can be reused for several titrations by storing them in an acid electrolyte for a long period of time. Thus, the conventional inert Pt or Au can be substituted for by using a PANI-deposited nonplatinum reactive metal as a potentiometric sensor for redox titrations.     

Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

Thin-layered MoS2/polyaniline nanocomposite for highly sensitive electrochemical detection of chloramphenicol

In this study, we synthesized molybdenum disulfide/polyaniline (MoS₂/PANI) nanocomposite via in situ polymerization of aniline in the presence of thin-layered MoS₂. The as-prepared MoS₂/PANI nanocomposite obtained an improved electrochemical performance due to the physisorption interaction between aromatic aniline and the basal plane of MoS₂. Furthermore, we constructed a new kind of electrochemical sensor based on MoS₂/PANI nanocomposite for the detection of chloramphenicol, which showed an excellent performance. The sensor has a high sensitivity and wide detection range from 1×10^-7 mol/L to 1×10^-4 mol/L, with a low detection limit of 6.9×10^-8 mol/L.     

电聚合苯胺过程的在线紫外-可见光谱

用在线紫外-可见光谱电化学的方法对0.5mol/L硫酸水溶液中苯胺在ITO导电玻璃电极上的电化学聚的过程进行了研究.结果表明在循环伏安条件下苯胺发生了电聚合,聚合速率与苯胺浓度成正关系;而且在线紫外-可见电化学光谱表明,在0.01mol/L苯胺溶液的电聚合过程的诱导期较长.恒电位条件下的在线紫外-可见电化学光谱显示苯胺浓度为0.05mol/L,电位为0.8V时,在ITO电极上苯胺低聚合物中间体可能产生于聚苯胺形成之前;而0.01mol/L苯胺在0.8V电位下不发生聚合,但在线紫外-可见光谱又显示此时在电极上可能存在小的苯胺低聚物的中间体;在线紫外-可见光谱表明这种中间体是可能产生并存在电极表面上的.     

聚苯胺薄膜电极上循环伏安法可逆波理论和验证

提出了聚苯胺薄膜电极上循环伏安法可逆波方程式，对伏安曲线的性质进行了详细的讨论。聚苯胺薄膜电极是利用浓度为１．０９ｍｏｌ／Ｌ苯胺溶液（内含２．０ｍｏｌ／Ｌ ＨＣｌ）在铂电极上用恒电流（０．０１－０．１ｍＡ／ｃｍ＾２）使苯胺发生氧化反应进而经聚合获得。结果表明，该法得到的聚苯胺膜具有良好的均匀度和单一性。在１０ｍｏｌ／Ｌ ＨＣｌ底液中获得的循环伏安曲线与理论结果相符合。     

Preparation and characterization of composite polyaniline materials for catalytic purposes

Composite film electrodes were prepared by open-circuit Pt deposition on polymeric PANI films that were electrosynthesized from aniline acid solutions with suspended carbon particles (CPs). Gold, nickel, and a Ni-based alloy, Nichrome, were used as substrates, and carbon particles, carbon nanotubes (CNT), and Vulcan XC-72R carbon black, suspended in the monomer acid solution, were incorporated into the film. Pt particles were dispersed on films grown on Ni-based substrates by deposition from a Pt(IV) acid solution at open circuit (OC). CNT trapped into the PANI films have a favorable influence on Pt dispersion. The novel composite electrodes showed significant catalytic activity for methanol oxidation.