Determination of gatifloxacin in bulk and tablet preparations by high-performance liquid chromatography

A sensitive, precise, and specific high-performance liquid chromatographic (HPLC) method was developed for the assay of gatifloxacin (GATX) in raw material and tablets. The method validation parameters yielded good results and included the range, linearity, precision, accuracy, specificity, and recovery. It was also found that the excipients in the commercial tablet preparation did not interfere with the assay. The HPLC separation was carried out by reversed-phase chromatography on a C18 absorbosphere column (250 x 4.6 mm id, 5 microm particle size) with a mobile phase composed of acetic acid 5%-acetonitrile-methanol (70 + 15 + 15, v/v/v) pumped isocratically at a flow rate of 1.0 mL/min. The effluent was monitored at 287 nm. The calibration graph for GATX was linear from 4.0 to 14.0 microg/mL. The interday and intraday precisions (relative standard deviation) were less than 1.05%.     

High performance liquid chromatographic determination of sodium benzoate, methylparaben and propylparaben as preservative components in nystatin suspensions

A simple and sensitive method was developed for the analysis of preservatives sodium benzoate, methylparaben and propylparaben in nystatin suspensions by reversed-phase high performance liquid chromatography (HPLC), equipped with a C18 column and PDA detector. The mobile phase was a mixture of acetonitrile and acetate buffer of pH 4.4 (35:65 v/v). Under the optimized experimental conditions, separation of the preservatives was achieved in less than 20 min. The limits of quantifications (LOQs) and the linear dynamic ranges (LDRs) of sodium benzoate, methylparaben and propylparaben were 0.3 and 50–1000 μg Ml^?1, 0.5 and 50–600 μg ml^?1 and 0.3 and 50–900 μg ml^?1, respectively; the respective precisions (%RSD) at 500 μg ml^?1 level were 0.72%, 0.73% and 0.51% (n = 6). The average recoveries of sodium benzoate, methylparaben and propylparaben for spiked nystatin samples were obtained as 98%, 97% and 98%, respectively.     

Determination of lomefloxacin in tablet preparations by liquid chromatography

A sensitive, precise, and specific high-performance liquid chromatography (HPLC) method was developed for the assay of lomefloxacin (LFLX) in raw material and tablet preparations. The method validation parameters yielded good results and included the range, linearity, precision, accuracy, specificity, and recovery. It was also found that the excipients in the commercial tablet preparation did not interfere with the assay. The HPLC separation was performed on a reversed-phase Phenomenex C18 column (150 x 4.6 mm id, 5 microm particle size) with a mobile phase composed of 1% acetic acid-acetonitrile-methanol (70 + 15 + 15, v/v/v), pumped isocratically at a flow rate of 1.0 mL/min. The effluent was monitored at 280 nm. The calibration graph for LFLX was linear from 2.0 to 7.0 mg/mL. The interday and intraday precisions (relative standard deviation) were less than 1.0%. The method was applied for the quality control of commercial LFLX tablets to quantitate the drug.     

Determination of lipid oxidation level in broiler meat by liquid chromatography

An assay was conducted for the determination of malondialdehyde (MDA) levels in broiler meat. The method involves extraction of tissues with trichloroacetic acid (TCA) and reaction of the TCA extract with 2,4-dinitrophenylhydrazine (DNPH). After separation of the MDA-DNPH complex using a solid-phase extraction C18 column, samples were eluted with 1 mL acetonitrile. Aliquots of 20 microL acetonitrile were analyzed by liquid chromatography on reversed-phase C18 column (3 microm) with UV detection. The products were eluted isocratically with the mobile phase containing acetonitrile-water-acetic acid (39 + 61 + 0.2, v/v/v). The retention time for MDA-DNPH was 6.5 min, and the detection limit was 3.5 microg/kg. Two extraction methods (cold and hot) were also used in the study. The results showed that hot extraction increased results about 55.8% and recovery from samples spiked with 116.6 microg/kg was lower (74.6%) in comparison with cold extraction (94.7%).     

Improved thin-layer chromatographic method for the separation of cholesterol,egg phosphatidylcholine,and their degradation products

Degradation products of egg phosphatidylcholine (EPC) and cholesterol were analyzed with different normal- and reversed-phase thin-layer chromatography (TLC) systems. The best separation, in terms of the highest number of degradation products from both analytes, was obtained with a reversed-phase system, using butanol-methanol-water-96-98% (v/v) acetic acid (40 + 40 + 20 + 4, v/v/v/v) as the mobile phase after overnight saturation at 25 degrees C. A special development technique was used. After a first development, the plate was dried and a second development was performed in the same direction. This method enabled us to separate lysophosphatidylcholine, several free fatty acids and hydroperoxides, and several undefined degradation products of EPC and cholesterol. All products were visualized after the plate was dipped in a 1% (v/v) solution of 4-methoxybenzaldehyde in 98% sulfuric acid-96-98% (v/v) acetic acid-ethanol-water (2 + 10 + 60 + 30), presenting a blue color or a white spot against a colored background. After activation at 110 degrees C, a stable color for both analytes was reached after 12 min. Precision of <5% was obtained at 2 levels of analysis. Good linearity was obtained in the range of 5-30 microg for EPC (r = 0.991) and 5-40 microg for cholesterol (r = 0.991). These results show that TLC can be an inexpensive and easy alternative for the analysis of EPC and cholesterol.     

Improved and Rapid Liquid Chromatographic Determination of Indomethacin in Serum

Abstract

A rapid, specific and sensitive reversed-phase liquid chromatographic (LC) assay for the quantitative determination of indomethacin in serum without extraction was developed. Chromatographic separation using flunixin meglumine as the internal standard was achieved on octadecylsilane-coated particles with a mobile phase of 0.15 M acetate buffer pH 3.0 (50% v/v), acetonitrile (30% v/v) and methanol (20% v/v). The recovery of indomethacin from serum samples in the concentration range of 0.1-25 μg/ml was 95.5 ± 5.8% and as little as 100 ng/ml of indomethacin in serum samples can be quantitated by this procedure. A serum level versus time profile of dog with intravenously administered indomethacin demonstrated the applicability of the assay.     

Liquid chromatographic determination of amphotericin B in different pharmaceuticals

Amphotericin B (AmB) is one of the most potent antifungal agents and the drug of choice in the treatment of serious fungal infections. A liquid chromatographic (LC) method was developed to determine AmB in pharmaceutical formulations for injection, tissue culture, cream, and lotion. pBondapak C18 reversed-phase column and a simple mobile phase consisting of acetonitrile-water-acetic acid (40 + 54 + 6, v/v) was used. The flow rate was 1.8 mL/min and the effluent was monitored at 405 nm. The developed LC method uses piroxicam as an internal standard and has a limit of detection of 10 ng/mL, a limit of quantitation of 30 ng/mL, and the assay is linear from 0.01 to 100 microg/mL. AmB and piroxicam elute with retention times of 12.4 and 4.0 min, respectively, and the resolution between AmB and piroxicam was 10.6. In comparison with the official United States Pharmacopeia microbial assay for AmB, this LC method is more rapid, selective, sensitive, and offers positive identification.     

An HPLC assay for rat liver ferrochelatase activity

A rapid, reliable, sensitive and reproducible HPLC method was developed for the assay of ferrochelatase activity in rat liver. The assay was carried out aerobically with Zn2+ and mesoporphyrin or protoporphyrin IX as substrates. Zn-porphyrins formed were extracted with dimethyl sulphoxide/methanol (30:70, v/v) containing Zn-deuteroporphyrin as the internal standard for separation and quantification by reversed-phase chromatography. The Km for mesoporphyrin was 5.9 microM, for protoporphyrin IX 8.8 microM and for zinc 6.0 microM. The specific activities were 33.1 +/- 5.0 nmol Zn-mesoporphyrin or 13.4 +/- 2.0 nmol Zn-protoporphyrin formed per hour per mg of protein for mitochondria and 12.3 +/- 2.2 nmol Zn-mesoporphyrin or 4.6 +/- 0.9 nmol Zn-protoporphyrin per hour per mg of protein for liver homogenate.     

Development and validation of an HPLC method to quantify camptothecin in polymeric nanocapsule suspensions

A simple, rapid, and sensitive reversed-phase column high-performance liquid chromatographic method was developed and validated to quantify camptothecin (CPT) in polymeric nanocapsule suspensions. The chromatographic separation was performed on a Supelcosil LC-18 column (15 cm x 4.6 mm id, 5 microm) using a mobile phase consisting of methanol-10 mM KH2PO4 (60 + 40, v/v; pH 2.8) at a flow rate of 1.0 mL/min and ultraviolet detection at 254 nm. The calibration graph was linear from 0.5 to 3.0 microg/mL with a correlation coefficient of 0.9979, and the limit of quantitation was 0.35 microg/mL. The assay recovery ranged from 97.3 to 105.0%. The intraday and interday relative standard deviation values were < 5.0%. The validation results confirmed that the developed method is specific, linear, accurate, and precise for its intended use. The current method was successfully applied to the evaluation of CPT entrapment efficiency and drug content in polymeric nanocapsule suspensions during the early stage of formulation development.     

Multiresidue determination of eleven quinolones in milk by liquid chromatography with fluorescence detection

A liquid chromatographic method with fluorescence detection was developed for simultaneous determination of norfloxacin, ofloxacin, ciprofloxacin, pefloxacin, lomefloxacin, danofloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, and flumequine in milk The samples were extracted with 10% trichloroacetic acid/acetonitrile (9 + 1, v/v) and cleaned by Strata-X reversed-phase solid-phase extraction cartridges. The 11 quinolones were separated on a reversed-phase C18 column (Hypersil BDS-C18) with mobile phase gradient elution and detected with fluorescence by means of a wavelength program. The recoveries for milk fortified with the 11 quinolones at 3 levels were 69-88% with acceptable relative standard deviations of <9% (intraday) and <14% (interday). The limits of detection were 23 microg/L for enrofloxacin, and 1-9 microg/L for the other 10 quinolones.     

Study of semi-automated solid-phase extraction for the determination of acaricide residues in honey by liquid chromatography

A solid-phase extraction (SPE) method followed by a reversed-phase high-performance liquid chromatography (HPLC) procedure is reported for the assay of a wide polarity range acaricide residues in honey. After selection of suitable chromatographic and detection conditions, most steps of the SPE procedure that may affect to the recovery were investigated. Honey sample was buffered at pH 6 and then applied to the preconditioned C₁₈ sorbent. A washing step was performed with 1 ml of a mixture of tetrahydrofuran (THF)–phosphate buffer (10:90, v/v) and finally, the analytes were eluted with 1 ml of THF. The extract was evaporated to dryness, reconstituted in mobile phase and chromatographed on a reversed-phase C₁₈ column with diode array detection. The recoveries of the more polar acaricides were higher than 80% and 60–70% for the more apolar ones. Limits of detection obtained ranged from 1 to 200 ng/g.     

A solid-phase extraction method for high-performance liquid chromatographic determination of salvianolic acid B in rabbit plasma: application to pharmacokinetic study

A sensitive solid-phase extraction/high-performance liquid chromatographic method with ultraviolet detection was established for the analysis of salvianolic acid B in rabbit plasma. The analyte was separated on a reversed-phase column with trifluoroacetic acid-methanol-acetonitrile (70:10:20, v/v/v) as mobile phase at a flow rate of 1 mL/min, and ultraviolet detection at 315 nm. The calibration curve for salvianolic acid B was linear over the range 35-1400 microg/L with coefficients of correlation >0.999. The inter-day and intra-day precisions of analysis were <15%, and assay accuracy ranged from 95.3 to 109.1%. This method is suitable for determining salvianolic acid B in plasma and thus investigating the pharmacokinetics of salvianolic acid B.     

Determination of nebivolol and valsartan in a fixed-dose combination by liquid chromatography

An accurate and reproducible liquid chromatographic assay method was developed and validated for the determination of nebivolol and valsartan in a capsule formulation. Buffer-acetonitrile (55 + 45, v/v) was used for reversed-phase liquid chromatography to determine the contents of nebivolol and valsartan in the combination-capsule dosage form. The method was validated by determining parameters such as specificity, linearity, limits of detection and quantitation, precision, accuracy, and robustness. The method was found to be specific against placebo interference. Linearity was evaluated over the concentration ranges of 2-8 micro/mL for nebivolol and 32-128 microg/mL for valsartan (the correlation coefficient was 0.9999 for both nebivolol and valsartan). Both the intraday and interday precision values of the system and the method were determined. The accuracy of the method ranged from 100.66 to 102.58% for nebivolol and from 101.17 to 101.85% for valsartan. The proposed method was found to be robust when slight but deliberate changes were made in the analytical conditions. The developed method was found suitable for the assay determination of nebivolol and valsartan in a capsule formulation.     

Direct high-performance liquid chromatography enantioseparation of terazosin on an immobilised polysaccharide-based chiral stationary phase under polar organic and reversed-phase conditions

High-performance liquid chromatography (HPLC) enantioseparation of terazosin (TER) was accomplished on the immobilised-type Chiralpak IC chiral stationary phase (CSP) under both polar organic and reversed-phase modes. A simple analytical method was validated using a mixture of methanol–water–DEA 95:5:0.1 (v/v/v) as a mobile phase. Under reversed-phase conditions good linearities were obtained over the concentration range 8.76–26.28 μg mL⁻¹ for both enantiomers. The limits of detection and quantification were 10 and 30 ng mL⁻¹, respectively. The intra- and inter-day assay precision was less than 1.66% (RSD%). The optimised conditions also allowed to resolve chiral and achiral impurities from the enantiomers of TER. The proposed HPLC method supports pharmacological studies on the biological effects of the both forms of TER and analytical investigations of potential drug formulations based on a single enantiomer. At the semipreparative scale, 5.3 mg of racemic sample were resolved with elution times less than 12 min using a mobile phase consisting of methanol–DEA 100:0.1 (v/v) and both enantiomers were isolated with a purity of ≥99% enantiomeric excess (ee). The absolute configuration of TER enantiomers was assigned by comparison of the measured specific rotations with those reported in the literature.     

Improving the Determination of Nitrovin in Feeds by Reversed-Phase LC with SPE

A simple reversed-phase liquid chromatographic method with ultraviolet detector (378 nm) for the determination of nitrovin in feeds was improved and validated. The mobile phase was a mixture of acetonitrile and 0.1% formic acid solution (v/v) in the ratio of 50:50 (v/v), and the flow rate was set at 1.2 mL min^?1. The extraction solution was a mixture of dimethyl formamide, acetonitrile and methanol (50:25:25, v/v), the sample was cleaned-up with reversed-phase solid phase extraction cartridge. The standard nitrovin was purified with crude nitrovin product by ethylene glycol monoethyl ether and identified by elemental analyzer. The limit of detection was 0.05 mg kg^?1 and the limit of quatification was 0.2 mg kg^?1 in feeds. The assay had satisfactory selectivity, recovery, linearity and precise repeatability and trueness.     

Simple High-Performance Liquid Chromatographic Method for the Analysis of Quinine in Human Plasma without Extraction

Abstract

A simple, rapid and sensitive assay, capable of quantitating quinine (Q) in human plasma samples is reported. The assay uses a reversed-phase C18 HPLC column packed with 5 μ ODS Hypersil. The chromatographic separation was accomplished with an isocratic mobile phase comprising acetonitrile-aqueous phosphate buffer pH 2 (50:50, v/v) containing 25 mM sodium dodecyl sulfate and 3 mM tetrabutylammonium bromide at a flow rate of 0.5 ml/min. The eluant was monitored by a fluorescence detector (excitation wavelength at 350 nm and emission wavelength at 450 nm). The assay was based on a simple plasma protein precipitation technique. To 200 μ of plasma sample, 400 μ of internal standard (cinchocaine 30 μ/ml in methanol) was added. After brief vortexing and centrifugation, the clear supernatant was injected onto the HPLC column. The inter- and intra-assay coefficients of variation were found to be less than 10%. The lowest limit of detection for Q in plasma was 18 ng/ml.     

Development and validation of a stability-indicating column high-performance liquid chromatographic assay method for determination of nebivolol in tablet formulation

A simple, precise, and accurate isocratic reversed-phase (RP) stability-indicating column high-performance liquid chromatographic (HPLC) assay method was developed and validated for determination of nebivolol in solid pharmaceutical dosage forms. Isocratic RP-HPLC separation was achieved on a Phenomenex Luna C8 (2) column (250 mm x 4.6 mm id, 5 microm particle size) using mobile phase composed of acetonitrile-pH 3.5 phosphate buffer (35 + 65, v/v) at a flow rate of 1.0 mL/min, and detection was performed at 280 nm using a photodiode array detector. The drug was subjected to oxidation, hydrolysis, photolysis, and heat to apply stress conditions. The method was validated for specificity, linearity, precision, accuracy, robustness, and solution stability. The method was linear in the drug concentration range of 40-160 microg/mL with a correlation coefficient of 0.9999. The repeatability relative standard deviation (RSD) for 6 samples was 0.69%, and the intermediate precision (RSD) for 6 samples was 1.39%. The accuracy (recovery) was between 98.57 and 99.55%. Degradation products produced as a result of stress studies did not interfere with detection of nebivolol, and the assay can thus be considered stability-indicating.     

Rapid and sensitive method for the determination of albendazole and albendazole sulphoxide in biological fluids

A sensitive and selective reversed-phase high-performance liquid chromatographic method for the determination of albendazole and its active metabolite albendazole sulphoxide in plasma has been developed. It involves single-step extraction of plasma with dichloromethane, evaporation of the solvent and chromatography on a muBondapak phenyl column with a mobile phase of water containing 1% (v/v) triethylamine-methanol-acetonitrile (70:10:20, v/v) at pH 3.1. Run time is 12 min. The assay satisfies all of the criteria required for use in clinical pharmacokinetic studies and possesses important advantages, notably speed and expense, over current methods.     

Simple and Sensitive High-Performance Liquid Chromatographic Method for Determination of Transdermally Applied Flurbiprofen in Rat Plasma and Excised Skin Samples

A simple reversed-phase HPLC method has been developed for determination of flurbiprofen in rat plasma, excised skin extract, and transdermal patch formulations. The mobile phase was methanol–1% (v/v) phosphoric acid in water, 80:20 (v/v), at a flow rate of 0.5 mL min^-1; ibuprofen was used as internal standard. Flurbiprofen and ibuprofen was detected by UV absorption at 254 nm and 220 nm, respectively. The limit of quantitation was 0.1 µg mL^-1. The response was linearly dependent on concentration in the range 0.1–10 µg mL^-1, and accuracy and reproducibility were good. At these concentrations intraday and interday assay variability were below 8%. Recovery of flurbiprofen was greater than 94% over the linear range of calibration plot.