Solid polymer electrolytes. VI. Microstructure of organic–inorganic hybrid networks composed of 3‐glycidoxypropyltrimethoxysilane and LiClO4 and affected by different synthetic routes

Hybrid organic–inorganic materials derived from 3‐glycidoxypropyltrimethoxylsilane were prepared via two different synthetic routes: (1) the HCl‐catalyzed sol–gel approach of silane followed by the lithium perchlorate (LiClO₄)/HCl‐catalyzed opening of epoxide and (2) the simultaneous gelation of tin/LiClO₄‐catalyzed silane/epoxide groups. LiClO₄ catalyzed the epoxide polymerization, and its effects on the structures of these hybrid materials were studied by NMR. The structure of the inorganic side was probed by solid‐state ²⁹Si NMR spectroscopy, and the characterizations of the organic side and the chemical processes involved in the different synthetic routes were performed with solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR. The different synthetic routes significantly affected the polymerization behaviors of the organic and inorganic sides in the presence of LiClO₄. A larger amount of LiClO₄ promoted the opening of epoxide and led to the formation of longer poly(ethylene oxide) chains via the HCl‐catalyzed sol–gel approach, whereas in the case of the tin‐catalyzed approach, the faster polymerization of the inorganic side hindered the growth of the organic network. The addition of LiClO₄ was proven to be without crystalline salt present in the hybrid networks by wide‐angle X‐ray powder diffraction. Also, the interactions between the ions and hybrid host, examined with Fourier transform infrared and ⁷Li proton‐decoupled magic‐angle‐spinning NMR, further demonstrated that extensive ion aggregation existed in these hybrid materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 151–161, 2004     

Preparation and Optical Properties of Silica-Poly(ethylene oxide) Hybrid Materials

Structural evolution and optical properties of the silica-poly(ethylene oxide) hybrid films prepared from -glycidoxypropyltrimethoxysilane (GPTS) and 1-methylimidazol (MI) are studied. Polymerization of the epoxy groups is achieved by using 1-methylimidazol as a thermal curing agent. In liquid state ¹H &¹³ C NMR spectroscopy, it is found that silica condensation mainly occurs without epoxy ring opening. The epoxide polymerization is confirmed by using FT-IR, solid state CP-MAS ¹³C-NMR, and differential scanning calorimetry (DSC). The hybrid material is densified due to the epoxide polymerization as well as silica condensation with thermal curing. As a result, the thermal curing increases refractive index and extinction coefficient and shifts UV optical absorption edge to longer wavelength.     

Reverse Atom Transfer Radical Polymerization of MMA in the Presence of CaCO3/SiO2 Two-Component Composite Particles

Summary: We previously discovered that structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, can be achieved via reverse atom transfer radical polymerization (ATRP), using 2,2′-azo-bis-isobutyronitrile as initiator and Cu^II bromide as catalyst. In the present study, the influence of the mass ratio of CaCO₃/SiO₂ two-component composite particles to methyl methacrylate (MMA) on the rate and behavior of the polymerization was studied in detail. The results illustrate that increasing the mass ratio of CaCO₃/SiO₂ two-component composite particles will decrease the overall rate of polymerization of MMA under standard reverse ATRP conditions. Thermal properties of the obtained well-defined particles were characterized and determined by thermogravimetric analysis (TGA). The results indicate that well-defined PMMA chains grafted on the surface of CaCO₃/SiO₂ particles were only degraded by random chain scission of C C linkages within the PMMA chain, which is different from the degradation of PMMA chains prepared via traditional radical polymerization. This difference is reasonably ascribed to the difference between the end groups of PMMA prepared via reverse ATRP and that via traditional radical polymerization, which has been confirmed by end group analysis measured by ¹H–NMR spectroscopy.     

Syntheses of trimethoxysilyl‐endcapped polylactones via 3‐mercaptopropyl trimethoxysilane

Monofunctional polylactones were prepared by Bu₂Sn(OMe)₂‐initiated ring‐opening polymerization of ε‐caprolactone (εCL) followed by acylation with bromoacetylbromide. Telechelic polylactones and polylactides were prepared via ring‐expansion polymerization with 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP) or 2,2‐dibutyl‐2‐stanna‐pentaoxacyclotridecane (Bu₂SnTEG) as cyclic initiator. In situ combination of the polymerization with condensation by means of bromoacetylbromide yielded polylactones having bromoacetate endgroups. These endgroups were subjected to nucleophilic substitution with 3‐mercaptopropyl trimethoxysilane (3‐MPTMS). Analogous experiments were conducted with dl‐lactide. The telechelic trimethoxysilyl‐endcapped polylactones were characterized by viscosity, ¹H and ¹³C NMR‐spectroscopy, and MALDI‐TOF mass spectrometry. The mass spectra revealed small amounts of cyclic oligolactones as byproducts in all samples. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3667–3674, 2005     

Characterization of sol–gel process in the Y–Ba–Cu–O acetate–tartrate system using IR spectroscopy

Systematic investigation of sol–gel process in the Y–Ba–Cu–O acetate–tartrate system was performed using IR spectroscopy. Different values of synthesis parameters (temperature and duration of inorganic polymerization reactions, evaporation temperature and evaporation time during gelation) were used, and significant influence in some cases on superconducting characteristics of the oxide ceramics of composition YBa₂Cu₄O₈ was observed. Characterization by IR spectroscopy and thermogravimetric analysis, revealed the difference of local homogeneity in the precursor gels prepared under different evaporation regimes during gelation process. In addition, the explanation of the possible hydrolysis and condensation reactions in the sol state has been suggested.     

Studies on microwave-assisted ring-opening polymerization and property of poly(9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one)

Poly(9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one)(PPTC) was synthesized by the microwave-assisted ring-opening polymerization(MROP) of a six-membered cyclic carbonate monomer 9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one(PTC) with tin(Ⅱ) 2-ethylhexanoate(Sn(Oct)_2) or aluminum isopropoxide(Al(O~iPr)_3) as the catalysts. The obtained polycarbonates were further reduced by apalladium/carbonate catalyst(10% Pd/C) to afford partly deprotected polycarbonates containing hydroxyl groups(HPPTC). These two types of polycarbonates were characterized by ~1H-NMR, Fourier transform infrared spectroscopy(FTIR), UV, gel permeation chromatography(GPC), differential scanning calorimetry(DSC), and automatic contact-angle measurements. The influence of the feed molar ratio of monomer-to-catalyst, the microwave irradiation power and the reaction time on the polymerization was also studied. The experimental results showed that HPPTC possessed significantly higher hydrophilicity and water absorption rate than PPTC.     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 1. Alkoxide and bisketonate Ti complexes

Bisketonate and alkoxide Ti(III) complexes derived from Zn reduction of Ti(IV) precursors were evaluated as catalysts for the living radical polymerization (LRP) of styrene initiated by Ti‐catalyzed epoxide radical ring opening and mediated by reversible termination with Ti(III). No polymerization occurred with tris(2,2,6, 6‐tetramethyl‐3,5‐heptanedionato)titanium (III), whereas dichlorobis(2,2,6,6‐tetramethyl‐3,5‐heptanedionato)titanium (IV) affords only a free radical polymerization. Preliminary living features were displayed by (ⁱPrO)₂TiCl₂. Investigations of the effect of epoxide/Ti/Zn ratios, temperature, and nature of the epoxide demonstrated that (ⁱPrO)₃TiCl provides a linear dependence of M_n on conversion over a wide range of conditions with an optimum for [Sty]/[epoxide group]/[Ti]/[Zn] = 50/1/2/4 at 90 °C. However, the polydispersity could not be reduced below 1.4–1.5, with an initiator efficiency of 0.15. These results were rationalized in terms of a combination of decreased Ti oxophilicity and ligand exchange. The lowered oxophilicity decreases the initiation rate and broadens M_w/M_n. The fast alkoxide exchange promotes a weak dependence of the polymerization on reaction conditions and generates macromolecular Ti species with reduced ability to mediate LRP. Thus, while monofunctional epoxides provide homogeneous polymerizations and narrower M_w/M_n, difunctional initiators may lead to gel formation at high conversion. Nonetheless, all polymerizations were light gray to colorless and afforded white polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6028–6038, 2005     

有机/无机复合载体负载复合催化剂用于乙烯聚合时有机载体的作用

采用溶胶-凝胶法,将苯乙烯-丙烯酸(P(S-co-AA))共聚物包覆在以硅胶/MgCl2为载体的TiCl3催化剂(M-1催化剂)上,负载(n-BuCp)2ZrCl2后制得TiCl3/(n-BuCp)2ZrCl2复合催化剂,研究聚合物载体P(S-co-AA)在复合催化剂乙烯聚合中的作用.前期实验结果表明有机载体P(S-c...     

Biodegradable Gelatin as Template for the Preparation of Mesoporous Alumina

In this study, we propose a time‐ and energy‐saving method using biodegradable gelatin as a green template and a low‐toxicity inorganic aluminum salt (Al(NO₃)₃·9H₂O) as a low‐cost aluminum source for the preparation of mesoporous alumina (γ‐Al₂O₃). The effects of pH (pH 8.0–10.0), gelatin to aluminum source ratio (0–1.9), and the hydrothermal treatment time (0–72 h) are thoroughly explored. The gelatin can assemble with the aluminum species γ‐AlOOH via hydrogen bonding to prevent the self‐condensation of the γ‐AlOOH during the hydrothermal treatment. Distinctly, the mesoporous γ‐Al₂O₃ was obtained from the calcination of the resulting gelatin–γ‐AlOOH composites. Without gelatin, high‐crystallinity γ‐AlOOH formed after the hydrothermal treatment, which transformed into the nonporous γ‐Al₂O₃ with a small surface area (20 m²/g). Finally, it was found that with a gelatin/aluminum ratio of 0.81, reaction pH value of 8.0, and hydrothermal treatment time of 24 h, high‐surface‐area mesoporous γ‐Al₂O₃ (262 m²/g) with pore diameter of 6.3 nm could be synthesized.     

单脒基铝络合物催化己内醋聚合及己内醋/丙交醋共聚

将单脒基铝络合物用于催化6-己内酯(e-CL)开环聚合反应,结果表明,该类铝络合物表现出很高的催化活性:25℃时络合物({PhC(N-2,6-iPr2C6H3)2)A1Me2](Cl)催化ε-CL聚合1h,单体转化率为91%;70℃时络合物[{PhC(N-2,6-iPr2C6H3)-(N-2,6-Me2C6H3)}Al...     

Synthesis and thermal transformations of polyphosphosiloxane based on trimethyl phosphate and (3-aminopropyl)triethoxysilane

A method for the synthesis of polyphosphosiloxane by the thermal condensation of an equimolar mixture of trimethyl phosphate and (3-aminopropyl)triethoxysilane at 200 °C was developed. The reaction affords ethanol and polyphosphosiloxane-{Si(OEt)[(CH₂)₃NR¹R²]-O-P(O)(OMe)-O}_n-(R¹ = H, Me; R² = Me), whose composition and structure were confirmed by ¹H, ¹³C, and ³¹P NMR spectroscopy, IR spectroscopy, and elemental analysis. The scheme of polymerization involving the intermediate formation of methyl-and dimethylphosphoric acids and their condensation with ethoxysilanes was proposed. The calcination of the obtained polyphosphosiloxane in vacuo at 350 °C results in the elimination of the amino groups and alkoxide substituents, and a spatially cross-linked polymer is formed as an amorphous powder. Its further thermolysis at 600 and 1000 °C gives crystalline phosphosilicates Si₅O(PO₄)₆ or SiP₂O₇. Their amorphous and crystalline samples were characterized by IR spectroscopy, X-ray diffraction analysis, and solid-state ¹³C and ³¹P spectroscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2138–2148, November, 2007.     

Synthesis,characterization and electrocatalytic properties of carbon nitride nanotubes for methanol electrooxidation

In this paper, carbon nitride nanotubes (CNNTs) have been synthesized with porous anodic aluminum oxide membrane as template by the thermal polymerization of sol–gel precursors for the first time. Field emission scanning electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, elemental analysis and X-ray photoelectron spectroscopy were applied to characterize the morphology and composition of the as-prepared nanotubes. The electrocatalytic activity and stability of CNNTs, towards methanol electrooxidation in 0.5 mol/dm³ H₂SO₄ solutions containing 1 mol/dm³ CH₃OH are presented at room temperature.     

Poly(10-undecene-1-ol) characterized by MALDI-TOF MS and NMR spectroscopy

Poly(10-undecene-1-ol)s were synthesized by metallocene-catalyzed polymerization. MALDI-TOF MS allows obtaining detailed information on the monomer units in the polymer chains and the nature of the head and end groups of these polymers in dependence on the Al alkyl triisobutyl aluminum (TIBA) as well as methylalumoxan (MAO), both used as protecting agent for the hydroxyl groups of the monomer. The peak-to-peak distances of the main peaks could be distinctly assigned to the monomer unit 10-undecene-1-ol. Evaluating the MALDI-TOF peak distributions, polymers with -H, -C₄H₉, -CH₃ head groups in combination with vinylidene and saturated (–CH₃) end groups could be detected. By ¹H NMR spectroscopy, it was verified that with the used catalysts polymers with vinylidene end groups were obtained predominantly. The presence of saturated end groups could be proved qualitatively by combination of ¹H and ¹³C NMR spectroscopy for polymers produced by TIBA protection, which strikingly confirm the results from MALDI-TOF MS. For the polymers prepared with only MAO protection, saturated groups are also proved but discrimination between head and end groups was not possible. A polymerization mechanism corresponding to the detected different head and end groups is proposed.     

The Effect of Nanoscaled Metal Oxide Sols on the Structure and Properties of Glycidoxypropyltrimethoxysilane Derived Sols and Gels

Glycidoxypropyltrimethoxysilane (GPTS) is frequently used as precursor for the preparation of sol-gel derived nanoscaled hybrid polymers. The influence of nanoscaled metal oxide sols of silica, boehmite, zirconia and ceria on reactions of GPTS in ethanolic hydrolysates and in corresponding gels (epoxide ring-opening, condensation degree) was examined by liquid- and solid-state ¹³C and ²⁹Si NMR with regard to a better correlation between structure and material properties. Generally, a higher condensation degree of RSi(O_0.5)₃ units of GPTS is found after addition of metal oxide sols compared to GPTS without additives. The metal oxide sols (10 mole% series) cause an epoxide ring-opening up to 20% in GPTS hydrolysates after 24 h. A nearly complete ring opening was found in the boehmite and silica containing hybrid gels whereas gels containing ceria and other types of silica only show a low degree of ring-opening. The results show an accelerated ring-opening with increasing content of AlO/OH-species in silica sols. ¹³C NMR studies reveal that the epoxide ring-opening does not completely lead to polyether structures but to considerable amounts (up to 40%) of ethylether groups which can influence the material properties (hardness).     

Investigation of the effect of epoxide structure on the initiation efficiency in isobutylene polymerizations initiated by epoxide/TiCl4 systems

The effect of the chemical structure of styrene-based epoxides, namely, styrene epoxide (SE), α-methylstyrene epoxide (MSE), p-methylstyrene epoxide (pM-SE) and α-methyl-p-methylstyrene epoxide (pM-MSE), in conjunction with TiCl₄, on the initiation efficiency (I_eff) in the carbocationic polymerization of isobutylene (IB) was investigated. SE yielded living polymerization, but the initiation efficiency was low when compared to MSE (I_eff=8% and 35%, respectively). pM-SE led to non-living IB polymerization, while pM-MSE revealed linear M_n-conversion plot and narrow MWD with a non-linear first order rate plot. Among the epoxides investigated, MSE was the best initiator to scale up the one-step synthesis of polyisobutylenes (PIBs) carrying one primary hydroxyl head group and one tertiary chloride end group. The hydroxyl functionality of these PIBs determined by ¹H-NMR was F_n=1.09±0.16 from 24 experiments.     

Polymerization of glycolide promoted by ω-Al-alkoxide poly(ϵ-caprolactone) macro-initiators and formation of stable colloidal dispersions

Block polymerization of glycolide (GA) and ϵ-caprolactone (ϵ-CL) has been initiated with aluminum alkoxides, such as Al(OⁱPr)₃ and Et₂AlOCH₂X (where X = -CH₂-Br and -CH₂O-C(O)-C(Me)=CH₂), in THF at 40°C. Structure and composition of block copolyesters have been characterized with respect to the molecular weight by NMR spectroscopy and thermal analysis. Copolymerization is typically living, so that block copolyesters have been synthesized with predictable molecular weight and composition. The inherent insolubility of polyglycolide block is responsible for the heterogeneity of the polymerization medium and formation of stable, non-aqueous colloidal dispersions. This effect is especially pronounced at high GA/ϵ-CL molar ratios. Colloidal dispersions have been analyzed by transmission electron microscopy (TEM) and photocorrelation spectroscopy (PCS).     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Fabrication of Siloxane Hybrid Material With High Adhesion and High Refractive Index for Light Emitting Diodes (LEDs) Encapsulation

A novel inorganic-organic siloxane hybrid material with self-adhesion ability and high refractive index for high-power light emitting diodes (LEDs) encapsulation is introduced. Under the catalysis of an anion exchange resin, the hybrid material was synthesized by a sol-gel condensation process from methacryloxy propyl trimethoxyl silane (MPTS), γ-(2, 3-epoxypropoxy)propytrimethoxysilane (EPTS) and diphenylsilanediol (DPSD). This hybrid material was characterized by Fourier-transform infrared spectroscopy and ¹H-NMR. The resin-type encapsulation material was then prepared by hydrosilylation of the newly synthesized inorganic-organic siloxane hybrid material and methylphenyl hydrogen-containing silicone resin. The cured silicone resin-type encapsulation material can be used as a LEDs encapsulant, owing to high refractive index (n = 1.544), high transparency, appropriate hardness, and excellent thermal stability, as well as good adhesive strength between the encapsulating material and the substrate of LED lead frame.     

Hydrothermal Synthesis and Characterization Properties of C7H12N2[H2PO4]2.1/2H2O

An orthophosphoric hybrid material was successfully prepared by a hydrothermal reaction at 110 °C. A single crystal X-ray structure, thermal behavior, IR, and NMR spectroscopy investigations are given for a new organic cation bis dihydrogenomonophosphate C₇H₁₂N₂[H₂PO₄]₂.1/2H₂O. The latter has been synthesized hydrothermally using 2,4-diaminotoluene (DAT) and orthophosphoric acid. The atomic arrangement can be described as inorganic sheets alternating with inorganic-organic layers. The organic group C₇H₁₂N⁺ ₂ is located between inorganic groups to build multiple hydrogen bonds to ensure the three-dimensional cohesion network. The thermal behavior and IR, NMR and impedance spectroscopy studies are discussed for the powder samples of this compound.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Modification of Thermo-Optic Characteristics of Sol-Gel Inorganic-Organic Hybrid Materials

The effect of the inorganic oxide network on the variation of thermo-optic characteristics (dn/dT) in inorganic-organic hybrid material prepared through the sol-gel process was investigated. The dn/dT values were negative for all samples, and decreased in magnitude with the increasing concentration of the inorganic oxide or heterometallic oxide network. The dn/dT also became less negative with the increase in the degree of inorganic condensation in sol-gel reaction. A negative dn/dT value is consistent with thermal expansion of the material, and it is believed that the value of the dn/dT in our inorganic-organic hybrid materials was principally sensitive to variations in expansion term.