1, 2-Dithiolium salts

4-(p-Tolyl)-1,2-dithiolium hydrogen sulfate (I) is not a specific analytical reagent for the majority of anions, and it is not very selective, only in a few cases attaining pD=5 (MoO₄ ^2–, [Hg(CNS)₄]^2–, and [PtCl₆]^2–). All strongly colored anions give colored salts with I. Among the weakly colored anions, the [Fe(CN)₆]^4– anion is worthy of special note, since it forms a deeply colored salt with I. This anion can be detected with I in the presence of Cl^–, Br^–, I^–, CNS^–, ClO₄ ^–, IO₄ ^–, and ReO₄ ^–, which form fairly readily soluble salts with I. Compound I is also a fairly selective reagent for Pd²⁺ in acid solution (pD=5).For part II, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 6, No. 5, pp. 595–597, May, 1970.     

The Oxidation of Luminol an Experiment to Maximize the Efficiency of Chemiluminescence from Luminol

In this work, seven inorganic salts, KCl, Na₂SO₄, MgSO₄-7H₂O, ZnCl₂, Na₂CrO₄, CuSO₄-5H₂O, and K₃[Fe(CN)₆], were used as catalysts to induce chemiluminescent luminol oxidation in alkaline aqueous media. It was observed that simple salts containing either Mg²⁺, Zn²⁺, Na⁺ and K⁺ cations or SO₄^2– and Cl^– anions, are not active as catalysts. On the other hand, the relative order of activity detected for the active chemiluminescent salts containing Fe(III), Cu(II) and Cr(VI) cations is K₃[Fe(CN)₆] < CuSO₄-5H₂O < Na₂CrO₄. The intensity of the emitted light agrees with the standard reduction potentials of the corresponding redox couple and with the presence of paramagnetic species in the aqueous solutions. The inhibition effect of mannitol was also studied.     

The O–H···O, O–H···N and C–H···O hydrogen bonds in 1,4-dimethylpiperazine mono-betaine monohydrate

1,4-Dimethylpiperazine mono-betaine (1-carboxymethyl-1,4-dimethylpiperazinium inner salt, MBPZ) crystallizes as monohydrate. The crystals are orthorhombic, space group Pccn. Two MBPZ molecules and two water molecules form a cyclic oligomer, (MBPZ·H₂O)₂. The O–H···O and O–H···N hydrogen bonds are of 2.769(1) and 2.902(1) Å, respectively. The dimers interact with the neighboring molecules through the C–H···O hydrogen bonds of 3.234(1) Å. The piperazine ring assumes a chair conformation with the N(4)–CH₃ and N⁺(1)–CH₂COO⁻ groups in the equatorial position and the N⁺(1)–CH₃ group in the axial one. The FTIR spectrum is compared with that calculated by the B3LYP/6-31G(d,p) level of theory.     

Theoretical analysis of counterfoil influence over the physicochemical properties of aniline tetramers in several oxidation states

We present semiempirical quantum chemical calculations of geometric structures, charge distributions, energy levels, ionization potentials, and enthalpies of formation for aniline tetramers in different oxidation states using the semiempirical AM1 method. For tetraaniline radical cation the effect of these three counterions on the above-mentioned physicochemical parameters was analyzed. The ions studied included Cl^–, HSQ₄ ^–, and CH₃COO^–. Chloride counterion showed a large charge transfer to the chain, as was shown in a preceding work [4]. HSO₄ ^– showed a strong charge stabilization without transfer. CH₃COO^– exhibits hydrogen bond formation and also displays a strong charge stabilization in a fragment of the chain, but does not transfer any charge. Also, Cl^– was able to form a hydrogen bond, depending on the initial position that it occupies in relation to the tetrameric chain, which is then optimized. Charge transfer is present for the Cl^– cases. For dication structures the effect of SO ₄ ^2– was analyzed. Our calculations showed that the distribution of the energy levels of tetraaniline radical cation can be comparable to the polyaniline ones by adding a counterion to the tetramer.     

Anionic Effects on Raman OD Stretching Spectra for Alcoholic LiX Solutions (X = Cl−, Br−, I−, ClO4 −, NO3 −, and CH3COO−)

Raman OD stretching spectra of alcoholic LiX (X = Cl^–, Br^–, I^–, ClO₄ ^–, NO₃ ^–, and CH₃COO^–) solutions (alcohols = methanol and ethanol) were measured in the liquid state at room temperature and in the glassy state at liquid nitrogen temperature. The effects of the anions on the Raman OD stretching spectra in these alcoholic solutions are investigated and the structural changes of the solutions are discussed. It is shown that the structure-breaking effects of anions on the intrinsic alcoholic structure increase in the order: Cl^– < Br^– < I^– < ClO₄ ^–. From spectral changes, it seems that CH₃COOLi exerts little effect on the liquid structure of the alcohol.     

Negative ion chemical ionization mass spectrometry of some isocyanates

Summary Negative ion mass spectra for 3 aliphatic and 4 aromatic isocyanates have been obtained by low pressure chemical ionization, using CH₄, CO₂ and N₂O as reagent gases. All compounds furnished intense anions at m/z 42. With CH₄, quasi-molecular anions were observed at m/z M+1 for aliphatic and m/z M+1 and M–1 for aromatic isocyanates. With N₂O, anionic substitution products at m/z M+15 and M+30 were observed, and with CO₂ and N₂O, peaks at m/z M–12 could be detected for all aromatic isocyanates. Studies with ¹³CO₂ and C¹⁸O₂ as reagent gases showed that the anions at m/z M–12 and M+15 correspond to [M–CO+O]^– and [M–H+O]^–, respectively.

---

Negativionen-Massenspektrometrie mit chemischer Ionisierung von einigen Isocyanaten

Zusammenfassung Die Negativionen-Massenspektren von 3 aliphatischen und 4 aromatischen Isocyanaten wurden mittels chemischer Ionisation bei tiefem Quellendruck aufgenommen, und zwar mit den Reagensgasen CH₄, CO₄ und N₂O. Alle Verbindungen lieferten intensive Anionen mit m/z 42. Mit CH₄ erhielten wir die quasi-molekularen Anionen M+1 für aliphatische sowie M+1 und M–1 für aromatische Isocyanate. Das Reagens N₂O ergab die anionischen Substitutionsprodukte M+15 und M+30. Sowohl CO₂ als auch N₂O führten mit aromatischen Isocyanaten zur Bildung von M–12 Anionen. Versuche mit ¹³CO₂ und mit C¹⁸O₂ als Reagensgase zeigten, daß die Anionen M–12 und M+15 den Ionen [M–CO+O]^– und [M–H+O]^– entsprechen.

     

Transition metals in atmospheric aqueous samples, analytical determination and speciation

Summary Two rain water samples were analyzed with respect to the determination of the species which are present at the given conditions. The parameters determined were: pH, E_h, electrolytical conductivity, concentration of anions (SO ₄ ^2– , NO ₃ ^– , Cl^–, NO ₂ ^– , HCOO^–, CH₃COO^–), of main cations (Na⁺, K⁺, NH ₄ ⁺ , Mg²⁺, Ca²⁺), and of transition metals (V, Cr, Mn, Fe, Co, Cu, Zn). The methods used were filtration and ultrafiltration, voltammetry, sorption on various sorbents and ion chromatography. Furthermore, E_h-pH-diagrams were taken into account and the partition of the species was calculated by means of stability constants. The transition elements species in the atmospheric aqueous solutions are discussed.     

The formation of clathrate-like hydrates of tetrabutylammonium halogenated carboxylates

The solid-liquid phase diagrams of binary mixtures of tetrabutylammonium halogenated carboxylates with water were examined in order to confirm the formation of clathrate-like hydrates. It was found that, among thirteen carboxylates examined, four carboxylates having CH₂FCOO^–, CHF₂COO^–, CF₃COO^–, and CH₂ClCOO^–, formed a hydrate with hydration numbers around 30 and seven carboxylates having CHCl₂COO^–, CCl₃COO^–, CH₂BrCOO^–, CHBr₂COO^–, CBr₃COO^–, CH₃CHClCOO^–, and CH₃CHBrCOO^– formed a hydrate with hydration numbers around 23. The latter hydrate has not been reported earlier. The melting points of these newly found hydrates were fairly high: they lie between 10 and 16°C. The effect of Cl and Br atoms attached to the carbon atom of the-position of a carboxylate anion both on the type of hydrate formed and on its stability was greatly different from that of a CH₃ group attached to the same position of the carboxylate anion.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Crystal Structure of Cesium-Sodium Molybdate Dihydrate

Structure of CsNaMoO₄ · 2H₂O crystals formed in Cs₂MoO₄–Na₂MoO₄–H₂O system is determined by X-ray diffraction study. The unit cell parameters a = 6.379(2) Å, b = 8.631(2) Å, c = 13.670(2) Å, V = 752.6(3) ų, Z = 4, M = 351.87, (calcd) = 3.105 g/cm³, space group P2₁2₁2₁. The isle crystal structure is built of MoO₄ ^2-, Cs⁺, and Na⁺ ions. The Mo–O bond lengths lie within 1.756(2)–1.769(3) Å range. The OMoO bond angle is 109.45° on average. Three oxygen atoms of MoO₄ ^2- anion are involved in hydrogen bonds with water molecules., while the fourth O atom participates in the formation of Na polyhedra only. The octahedral environment of Cs⁺ ions is formed by oxygen atoms of MoO₄ ^2- anions, without participation of water molecules. The structure contains two crystallographically independent water molecules, whose tetrahedral coordination consists of two Na⁺ ions and two MoO₄ ^2- anions.     

Spectrophotometric determination of thiosulfate and tetraphenylborate ions through ligand exchange reaction at solid surface

Summary A Spectrophotometric method is presented for the microanalysis of analytically important thiosulfate and tetraphenylborate anions in an aqueous solution. The method is based on ligand exchange in a dynamic approach incorporating a solid reagent mercuric chloranilate. The common cations Na⁺, K⁺, Al³⁺, Ca²⁺, and Mg²⁺ do not interfere and the anions CH₃COO^–, C₂O₄ ^2–, SO₄ ^–, C₃H₄OH-(COO)₃ ^3– and NO₃ ^– do not cause any adverse effects. The heavy metals Pb²⁺, Cd²⁺, Fe²⁺, Cu²⁺, and Zn²⁺ cause a negative interference while the halogens and SCN^– type of anions give a positive interference. The method is sensitive up to 5 ppm of tetraphenyl-borate anion and 10 ppm of the thiosulfate anion.

---

Zusammenfassung Ein spektrophotometrisches Mikroverfahren zur Bestimmung von Thiosulfat und Tetraphenylborat in wäßriger Lösung wurde angegeben. Es beruht auf dem Ligandenaustausch mit Hilfe von Quecksilberchloranilat. Die üblichen Kationen Na, K, Al, Ca und Mg stören nicht; auch die Anionen Acetat, Oxalat, Sulfat, Zitrat und Nitrat haben keinen störenden Einfluß. Die Schwermetalle Pb(II), Cd, Fe(II), Cu(II) und Zn verursachen negative Fehler, die Halogene, Thiocyanat und dgl. haben positive Fehler zur Folge. Die Methode ist empfindlich bis zu 5 ppm Tetraphenylborat und 10 ppm Thiosulfat.

     

Selective Detection of Multicarboxylate Anions based on “Turn on” Electron Transfer by Self‐Assembled Molecular Rectangles

Two new large molecular rectangles ( 4 and 5 ) were obtained by the reaction of two different dinuclear arene ruthenium complexes [Ru₂(arene)₂(O O)₂Cl₂] (arene=p‐cymene; O O=2,5‐dihydroxy‐1,4‐benzoquinonato ( 2 ), 6,11‐dihydroxy‐5,12‐naphthacene dionato ( 3 )) with the unsymmetrical amide (N‐[4‐(pyridin‐4‐ylethynyl)phenyl]isonicotinamide) donor ligand 1 in methanol in the presence of AgO₃SCF₃, forming tetranuclear cations of the general formula [Ru₄(arene)₄( )₂(O O)₂]⁴⁺. Both rectangles were isolated in good yields as triflate salts and were characterized by multinuclear NMR, ESI‐MS, UV/Vis, and photoluminescence spectroscopy. The crystal structure of 5 was determined by X‐ray diffraction. Luminescent rectangle 5 was used for anion sensing with an amide ligand as a hydrogen‐bond donor and an arene–ruthenium acceptor as a signaling unit. Rectangle 5 strongly bound multicarboxylate anions, such as oxalate, tartrate, and citrate, in UV/Vis titration experiments in 1:1 ratios, in contrast to monoanions, such as F^?, Cl^?, NO₃^?, PF₆^?, CH₃COO^?, and C₆H₅COO^?. The fluorescence titration experiment showed a large fluorescence enhancement of 5 upon binding to multicarboxylate anions, which could be attributed to blocking of the photoinduced electron transfer process from the arene–ruthenium moiety to the amidic donor in 5 ; this was likely to be a result of hydrogen bonding between the ligand and the anion. On the other hand, rectangle 5 was not selective towards any other anions. To the naked eye, multicarboxylate anions in a solution of 5 in methanol appear greenish upon irradiation with UV light.     

基于酰腙和酚羟基的阴离子受体的合成及其在含水介质中的阴离子比色识别性能

设计合成了一系列基于羟基和氨基的酰腙类受体分子.利用紫外-可见吸收光谱及1HNMR考察了其与F-,Cl-,Br-,I-,CH3COO-,H2PO4?,HSO4?,ClO?4等阴离子的作用.结果表明,该类受体分子在DMSO溶液中能较好地比色识别F-,CH3COO-,H2PO4?,其中受体2在含水介质中[V(DMSO)∶V(H2O)=7∶3]能选择性比色识别CH3COO-.1HNMR滴定实验研究了受体分子与阴离子之间的作用,结果表明受体分子与阴离子之间以氢键作用方式相结合.     

Anion Receptors Containing ‐NH Binding Sites: Hydrogen‐Bond Formation or Neat Proton Transfer?

When the amide‐containing receptor 1 ⁺ is in a solution of dimethyl sulfoxide (DMSO) in the presence of basic anions (CH₃COO^?, F^?, H₂PO₄^?), it undergoes deprotonation of the ‐NH fragment to give the corresponding zwitterion, which can be isolated as a crystalline solid. In the presence of less basic anions (Cl^?, Br^?, NO₃^?), 1 ⁺ establishes true hydrogen‐bond interactions of decreasing intensity. The less acidic receptor 2 ⁺ undergoes neat proton transfer with only the more basic anions CH₃COO^? and F^?, and establishes hydrogen‐bond interactions with H₂PO₄^?. An empirical criterion for discerning neutralisation and hydrogen bonding, based on UV/Vis and ¹H NMR spectra, is proposed.     

Synthesis,protonation and substitution behaviour of K3[ReO2(CN)4]

Summary The preparation and characterization of salts of the [ReO₂(CN)₄]^3–, [ReO(OH)(CN)₄]^2–, [ReO(H₂O)(CN)₄]^–, [Re₂O₃(CN)₈]^4– and [ReO(NCS)(CN)₄]^2– species are described. The nature of the protonation reactions of [ReO₂(CN)₄]^3– was established by the successful isolation of these salts.     

Relative efficiencies of substituted aromatic monocarboxylic acids as eluents in ion chromatographic separation of inorganic and organic anions

The eluent strengths of para, ortho and meta substituted hydroxy-, nitro-, amino- and sulfobenzoic acids in single column ion chromatographic separations of inorganic and organic anions have been evaluated and compared with benzoic acid.o-Sulfobenzoic acid turns out to be a stronger and efficient eluent compared to others for the separation and determination of monovalent (Cl^–, NO ₂ ^– , Br^–, NO ₃ ^– ) and divalent (SO ₄ ^2– , SeO ₄ ^2– , S₂O ₃ ^2– , S₂O ₆ ^2– ) inorganic anions. In addition it also functions as an appropriate mobile phase for the detection and quantification of some substituted benzoate ions in an aqueous medium.     

Crystal Structure and Properties of Rb4H2I2O10 · 4H2O

Single crystals of the Rb₄H₂I₂O₁₀· 4H₂O were synthesized for the first time and studied by X-ray diffraction analysis. The crystals are monoclinic, a = 7.321(6) Å, b = 12.599(8) Å, c = 8.198(8) Å, = 96.30(7)°, Z = 2, space group P2₁/c. The H₂I₂O₁₀ ^4– anion is formed by the edge-sharing IO₆ octahedra. The anions are united by hydrogen bonds into a chain running along the x axis. The chains are combined by water molecules into a three-dimensional structure through hydrogen bonds. The compound is a proton conductor. The conductivity values measured at 20–60°C vary within 10^–6 to 10^–4 ohm^–1 cm^–1.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Complexes of Some 3d-Metal Salts with N,N-Dimethylhydrazide of 4-Nitrobenzoic Acid

The [M(HL)₂(H₂O)₂]X₂ complexes were synthesized (M = Mn(II), Co(II), Ni(II), Cu(II), Zn; X = CH₃COO^–, Cl^–, BF₄ ^–) that incorporate bidentately coordinated molecules of N,N-dimethylhydrazide of 4-nitrobenzoic acid (HL). The latter molecules chelate the metal atom through the carbonyl O atom and the N atom of dimethylamino group. The square-planar complexes of Cu and Ni with deprotonated form of a ligand with composition ML₂ were also isolated. The synthesized complexes were studied by IR, electronic and EPR spectroscopies, and by cyclic voltammetry.     

Preparation and properties of the layered organic derivatives of γ-zirconium phosphate,Zr(CH3−(OCH2CH2)n−OPO3) (HPO4) (n=1–3)

New kinds of organic derivatives of layer structured -zirconium phosphate Zr(HPO₄)₂·2H₂O are prepared by the exchange of the interlayer phosphate groups with phosphoric ester groups having oxyethylene chains, CH₃–(OCH₂CH₂)_n–OPO₃ ^2– (n=1–3). Half of the interlayer phosphate groups are exchanged topochemically, the oxyethylene chains being grafted onto the phosphate layers through the ester bonds in the resulting derivatives. The derivatives behave like crown ethers, and form complexes with alkali salts of soft base anions such as SCN^– and I^–. Alkali salts of hard base anions such as Br^– and NO₃ ^– do not form complexes with the derivatives. The alkali iodide complexes of the organic derivatives can be used for the halogen exchange reaction. n-Butyl bromide is converted into n-butyl iodide in the presence of the alkali iodide complexes. The reactivities for the halogen exchange reaction increase with the number of the oxyethylene units.     

Preparation and properties of stable protonation products of permethylmetallocenecarbaldehydes (M = Fe,Ru, Os)

The products ofO-protonation of metallocenecarbaldehydes C₅Me₅MC₅Me₄CHO (M = Fe, Ru, Os) with HBF₄ and CF₃COOH were obtained for the first time, the adducts [C₅Me₅MC₅Me₄CH(OH)]⁺BF^– being isolated in a pure state. The structures of the adducts depend on the nature of the metal and the anion and are governed by the correlation between their basicities. For example, the Fe-containing adducts have an open fulvenoid structure with an interionic hydrogen bond irrespective of the nature of the anion X (X = BF₄ ^–, CF₃COO^–). In the case of the Ru- and Os-containing adducts in which the metal atoms are more basic than iron, the competition between the metal atom and the anion for the formation of a hydrogen bond with the OH group is clearly manifested in the IR and¹H NMR spectra. In the presence of the weakly basic BF₄ ^– anion, a cyclic structure with an intramolecular M...HO hydrogen bond is formed, while in the presence of a more basic F^– or CF₃COO^– anion. it transforms to the open fulvenoid structure with an interionic hydrogen bond. The structures of the compounds obtained were determined by IR and¹H NMR spectra, and the structure of the (C₅Me₅RuC₅Me₄CHOH)⁺...F^– salt was proved by X-ray diffraction analysis.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No.12, pp. 2486–2493, December, 1995.The work was carried out with financial support of the International Science Foundation (Grant Nos. JFN-100 and NSAW 000), the Russian Foundation for Basic Research (Grant No. 93-03-4610), and the Ministry of Science and Technical Policy of RF, whom the authors wish to thank.