基于分布源边界点法的局部近场声全息技术

为了克服基于分布源边界点法的近场声全息技术在小全息孔径条件下造成的重建误差问题,提出了基于分布源边界点法的局部近场声全息技术.该技术运用分布源边界点法,采用测得的较小全息面上的声压数据来外推较大全息面上的声压数据,然后用外推的数据进行全息重建.仿真和实验结果验证了采用该技术在小全息孔径条件下进行声源局部重建的有效性.     

基于波叠加法的patch近场声全息及其实验研究

提出了基于波叠加法的patch近场声全息技术(PNAH).该方法首先通过线性叠加在振动体内部“虚置”的若干不同强度的简单源产生的波场来拟合实际声场，实现近场外推，然后采用计算简便的FFT方法进行全息重建.该方法解决了现有PNAH技术近场外推过程中存在的外推精度和计算效率问题，具有外推精度高、计算速度快、实现方法简单等特点，更适用于工程计算.为了验证本方法的正确性与有效性，将其用于单点激励固支板的全息实验中，取得了令人满意的结果.     

基于波叠加法的近场声全息空间分辨率增强方法

提出一种基于波叠加法的近场声全息空间分辨率增强方法. 该方法在波叠加法的基础上,利用全息面声压信号求得布置在全息面附近的虚源面上的简单源源强,再根据求得的简单源源强实现对全息面声压的插值,进而利用插值后的全息面声压数据进行重建. 该方法可以提高近场声全息重建图像的空间分辨率,减少测量工作量,简化测量过程. 通过仿真对影响插值结果的参数进行了分析,给出了合理的选取范围;通过仿真和实验研究验证了该方法的有效性. 关键词： 波叠加法 近场声全息 空间分辨率     

全息声压场的加权范数外推方法

全息声压外推是Patch近场声全息技术的关键步骤.本文提出了全息声压的加权范数外推方法,该方法首先通过实测声压数据的功率谱信息构造频域加权范数,然后通过极小化频域加权范数实现全息声压外推.由于外推过程中同时利用了声压信号的波数域带宽和波数谱形状信息,因此其外推结果优于传统带限外推方法.数值仿真结果表明,该方法无论在外推精度还是计算效率上都明显优于经典的全息声压波数域外推方法.刚性箱体上的声激励固支板声压外推实验进一步验证了该方法的有效性和实用性. 关键词： 近场声全息 全息声压外推 加权范数     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上,提出一种基于波叠加法的循环平稳近场声全息技术,可以对具有复杂表面的声源进行全息重建,重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况,可由此确定调制信号源的产生位置.仿真分析和实验验证表明,基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点,无需计算边界奇异积分,计算效率高、精度好. 关键词： 近场声全息 循环平稳信号 波叠加     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上，提出一种基于波叠加法的循环平稳近场声全息技术，可以对具有复杂表面的声源进行全息重建，重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况，可由此确定调制信号源的产生位置.仿真分析和实验验证表明，基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点，无需计算边界奇异积分，计算效率高、精度好.     

基于声压-振速测量的平面近场声全息实验研究

常规的近场声全息均是采用全息面声压或质点振速作为输入量求解,由于采用单一输入量无法分离来自全息面背向声波的干扰,因此要求所有声源均位于全息面的同一侧,即测量声场为自由声场,这种要求大大限制了近场声全息的实际应用.基于声压-速度测量的近场声全息以全息面上声压和质点振速同时作为输入量,通过建立和求解两侧声源在全息面上的声压和质点振速耦合关系,可以实现全息面两侧声波的分离,从而解决上述问题.文中在前期对声场分离技术研究的基础上,基于欧拉公式和有限差分近似,推导了新的基于声压-速度测量的平面近场声全息理论公式.随后通过实验检验了该方法在有背景源干扰情况下实现声场分离和重建的有效性.     

利用完全复数极限学习机增强近场声全息空间分辨率

针对稀疏测量阵列条件下近场声全息重建结果空间分辨率不足的问题,提出了一种基于完全复数极限学习机的全息声压插值方法。该方法首先将已测量的全息面复声压和对应的测点坐标组成训练样本输入完全复数极限学习机,接着把插值点的坐标代入训练好的极限学习机,得到相应位置的复声压,实现全息数据的插值。利用插值后的全息数据进行重建,并与不做插值处理的重建结果和传统插值处理后的重建结果比较。仿真和实验结果均表明:与不做插值相比,该方法在不增加传声器的条件下显著提高了重建结果的空间分辨率。与基于支持向量机或传统极限学习机的插值方法相比,该方法速度更快,插值后重建结果精度更高。同时,通过添加噪声干扰验证了该方法的稳健性。      

基于统计最优和波叠加的联合局部近场声全息

提出了一种基于统计最优近场声全息和波叠加法的联合局部近场声全息技术。首先利用两次统计最优近场声全息的声源定位结果来指导配置等效源,其后利用波叠加法进行局部声场重构。该技术适合于中低频声场的局部重建,计算快速,重建精度高;可以在测量数据有缺失的情况下重建声场。进行了脉动球声源模型的数值仿真,并在半消声室内对电机噪声源进行了实验,仿真实验都准确地重构了声源所辐射的外部声场。该技术可以重建任意类球形声源辐射的声场。      

空间声场全息重建的波叠加方法研究

提出了基于波叠加法的近场声场全息技术，并将其用于任意形状物体的声辐射分析.在声辐射计算问题中，边界元法是通过离散边界面上的声学和位置变量来实现，而波叠加方法则通过叠加辐射体内部若干个简单源产生的声场来完成.因而，基于波叠加法的声全息就不存在边界面上的参数插值和奇异积分等问题，而这些问题是基于边界元法的声全息所固有的.与基于边界元法的声全息相比较，基于波叠加法的声全息在原理上更易于理解，在计算机上更容易实现.实验结果表明：该种全息技术在重建声场时，具有令人满意的重建精度. 关键词： 声全息 逆问题 波叠加方法 正则化方法     

Patch nearfield acoustic holography in a moving medium

To realize the accurate reconstruction of sound field in a moving medium under the condition of limited holographic aperture, a patch nearfield acoustic holography (NAH) in a moving medium is proposed. The proposed method not only reduces the influence caused by the limited aperture effects through sound field extrapolation, but also perfectly suits for sound field reconstruction in a moving medium by improving the shape of the modified Tikhonov regularization filter and the noise estimation method in accordance with flow effects. In the method, two cases that the flow direction is parallel to and perpendicular to the hologram surface are considered. Especially in the perpendicular case, the expression of the wavenumber component in the z direction is improved to make the proposed method suitable for the moving medium at a high Mach number. Simulations are investigated to examine the performance of the proposed method and show its advantages by comparing with NAH in a moving medium and the conventional patch NAH. It is found that, the proposed method is effective and robust at different flow velocities of the medium and different frequencies of the sound source.     

Reconstruction of source distributions from sound pressures measured over discontinuous regions: multipatch holography and interpolation

In the present work, a method of alternating orthogonal projections is described in the context of near-field acoustical holography; it allows missing (or "not measured") data to be recovered, thus relieving the strictness of measurement requirements related to the use of the discrete Fourier transform. The method described here provides the detailed foundation for the patch holography procedure that has previously been introduced to mitigate finite measurement aperture effects by allowing the sound field to be iteratively extended beyond the measurement aperture. It is also shown that the latter iterative algorithm can be used regardless of the spatial distribution of measured data: i.e., patches can be discontinuous. Numerical simulations performed by using a synthetic sound field created by a point-driven, simply supported plate were used to demonstrate the latter point. In particular, a multipatch holography procedure is described that allows a source distribution to be reconstructed from the hologram pressure measured over multiple, unconnected patches. It is finally shown that a related approach allows spatial resolution enhancement by interpolation between measured points.     

A one-step patch near-field acoustical holography procedure

When performing holography measurements over a limited area of a source, the hologram pressure typically remains finite at the edge of the measurement aperture. Patch near-field acoustical holography (NAH) has been developed specifically to mitigate the effects related to that windowing. In iterative patch NAH, the source distribution is reconstructed in two steps: first, the partially measured sound field is extended iteratively, and then the extended pressure is projected onto the source surface by using conventional NAH procedures. In the present work, a one-step procedure for performing that combined task is described. In this approach, the acoustical property to be reconstructed on a surface of interest is related to the partially measured pressure on the hologram surface in terms of sampling and bandlimiting matrices, and the reconstructed result is obtained by finding the regularized least squares solution of the latter relation; a procedure for determining the cutoff wave number of the bandlimiting matrix without a priori knowledge of the signal bandwidth is suggested. The proposed procedure was validated by using a synthetic sound field created by a point-driven, simply supported plated.     

双面声场反向神经网络声压外推分离

针对有限测量孔径造成的窗效应和离散传声器阵列带来的卷绕误差对双面声场分离技术的影响,提出了一种利用反向传播神经网络的全息面声压外推方法。该方法首先利用孔径内部测点平面坐标和相应声压值组成的学习样本训练神经网络,拟合出两者的函数关系。接着代入孔径外部测点坐标得到对应声压值,实现有限孔径外推。最后将已有测量值和外推测量值组成的虚拟大孔径导入双面声场分离处理。与传统外推方法相比,该方法不需要先验知识,操作简单,计算抗干扰能力强,结果准确性高。数值仿真和实验进一步验证了该方法在改善声场分离结果方面的可行性和有效性。      

Data extrapolation method for boundary element method-based near-field acoustical holography

A new data extrapolation method for boundary element method (BEM)-based near-field acoustical holography (NAH) is proposed to reduce an error of the reconstructed result obtained from the pressure measured on an aperture small compared with the structure. The finiteness of the measurement aperture is a serious impediment to actual large-scale implementation of NAH, because NAH requires the measurement of the pressure field over a complete surface of structure. To eliminate the requirement, the wave number-space data extrapolation method for fast Fourier transform (FFT)-based NAH has been proposed. In this paper, the extension of this data extrapolation method to BEM-based NAH is presented. The effectiveness of this method is demonstrated by experiments. The experiment results confirm that the reconstruction error is sufficiently suppressed by the proposed method.     

循环平稳声场的声源定位研究

旋转机械产生的辐射声场具有循环平稳特性,传统的平面近场声全息技术无法准确反映其调制特性,往往在边频带上出现虚假的能量的分布.采用循环谱密度取代功率谱密度作为重建物理量,则可准确提取循环平稳声场的调制和载波信息.考虑到循环谱密度的计算量以及特征提取的准确性,提出了循环谱密度组合切片分析法,并分析了加性白噪声对重建的影响.仿真分析及实验结果表明,此方法有较强的噪声抑制能力,全息重建的结果可准确反映声源的位置.     

Underwater hybrid near-field acoustical holography based on the measurement of vector hydrophone array

Hybrid near-field acoustical holography(NAH) is developed for reconstructing acoustic radiation from a cylindrical source in a complex underwater environment. In hybrid NAH,we combine statistically optimized near-field acoustical holography(SONAH) and broadband acoustical holography from intensity measurements(BAHIM) to reconstruct the underwater cylindrical source field. First,the BAHIM is utilized to regenerate as much acoustic pressures on the hologram surface as necessary,and then the acoustic pressures are taken as input to the formulation implemented numerically by SONAH. The main advantages of this technology are that the complex pressure on the hologram surface can be reconstructed without reference signal,and the measurement array can be smaller than the source,thus the practicability and efficiency of this technology are greatly enhanced. Numerical examples of a cylindrical source are demonstrated. Test results show that hybrid NAH can yield a more accurate reconstruction than conventional NAH. Then,an experiment has been carried out with a vector hydrophone array. The experimental results show the advantage of hybrid NAH in the reconstruction of an acoustic field and the feasibility of using a vector hydrophone array in an underwater NAH measurement,as well as the identification and localization of noise sources.     

Partial field decomposition of multi-source cyclostationary sound field

The cyclostationary sound field is a kind of special non-stationary field which has obvious modulation phenomena. Conventional planar near-field acoustic holography (PNAH) technique cannot exactly reflect its modulation characteristics. If the cyclic spectral density (CSD) instead of the complex sound pressure is adopted as the reconstruction variable, the modulating wave and carrier wave components of the cyclostationary sound field can be extracted effectively. A new technique called cyclostationary PNAH utilizing the CSD is proposed in this paper. Based on this technique, the problem of partial field decomposition by singular value decomposition (SVD) of multiple incoherent cyclostationary sound sources is researched. The results of numerical simulation and experiments show that the CPNAH technique and SVD decomposition method are effective.