Dynamic properties of bicellar lipid mixtures observed by rheometry and quadrupole echo decay

In bicellar dispersions of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC), the transition from isotropic reorientation to partial orientational order, on warming, is known to coincide with a sharp increase in viscosity. In this work, cone-and-plate rheometry, (2)H NMR spectroscopy, and quadrupole echo decay observations have been used to obtain new insights into the dynamics of phases observed in bicellar DMPC/DHPC mixtures. Samples with 25% of the DMPC component deuterated were used to correlate rheological measurements with phase behavior observed by (2)H NMR spectroscopy. Mixtures containing only normal DMPC (DMPC/DHPC) or only chain perdeuterated DMPC (DMPC-d(54)/DHPC) were used to refine rheology and quadrupole echo decay measurements respectively. The viscosity peaked at 4-9 Pa·s, just above the isotropic-to-nematic transition, and then dropped as samples were warmed through the nematic-to-lamellar transition. Quadrupole echo decay times above the nematic-to-lamellar transition were significantly longer than typically observed in the liquid crystalline phase of saturated lipid multilamellar vesicles. This may indicate a damping of slow bilayer undulations resulting from the coupling of opposite bilayer surfaces by DHPC-lined pores.     

Modification of a supported lipid bilayer by polyelectrolyte adsorption

Addition of a weak polyelectrolyte, poly(methacrylic acid) (PMA), to a supported phospholipid bilayer made from 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) depresses the melting temperature and alters the morphology of the bilayer in the gel phase. Ellipsometry measurements show that PMA adsorption lowers the phase transition temperature by 2.4 degrees C. Atomic force microscopy (AFM) showed no visible contrast in the fluid phase (above the melting temperature) but a rich morphology in the gel phase. In the gel phase, adsorption leads to formation of significantly less mobile phospholipid islands and other defects. One consequence of this lower mobility is a decrease in the implied cooperativity number of the phase transition, N, when polymer is added. Additionally, AFM images of the gel-phase bilayer show a highly defected structure that anneals significantly more slowly than in the absence of adsorbed polymer. Tentatively, we suggest that PMA preferentially decorates island and defect edges of the DMPC bilayer.     

Phase transition of individually addressable microstructured membranes visualized by imaging ellipsometry

The phase transition of individually addressable microstructured lipid bilayers was investigated by means of imaging ellipsometry. Microstructured bilayers were created on silicon substrates by micromolding in capillaries, and the thermotropic behavior of various saturated diacyl phosphatidylcholine (1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipentadecoyl-sn-glycero-3-phosphocholine, and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)) bilayers as well as DMPC/cholesterol membranes was determined by measuring the area expansion and thickness of the bilayer as a function of temperature. We found an increase in the main phase transition temperature T(M) of 2-6 degrees C and a substantially reduced cooperativity compared to multilamellar vesicles. Measurements of lateral diffusion constants D employing fluorescence recovery after photobleaching revealed, however, only a marginal decrease in D compared to those found for vesicles and multibilayers. The known dependencies of T(M) both on the chain length of diacyl PC membranes and on the cholesterol content were reproduced on a solid support. Microstructured bilayers offer the unique advantage of integrating an internal standard of known thermotropic properties, which turned out to be important for reducing the measurement error and for ruling out the slightly changing impact of the surface on the phase transition behavior due to the surface pretreatment.     

Isomerization dynamics of photochromic spiropyran molecular switches in phospholipid bilayers

Transient absorption spectroscopy was used to investigate the dynamics of the photochromic indolinobenzospiropyran reaction in toluene solution and in phosphatidylcholine bilayers (1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)). After excitation with UV light, colorless (R/S)-2-(3',3'-dimethyl-6-nitro-3'H-spiro[chromene-2,2'-indol]-1'-yl)ethanol derivatives are converted to colored merocyanine products in high yield; Phi = 0.45 in DMPC liposomes. We find that the reaction occurs in the bilayer aliphatic region in the gel (P(beta)(')) and liquid (L(alpha)) phases. The Arrhenius activation energy for the isomerization in DMPC bilayers was approximately 3.5 times larger in the liquid phase (L(alpha), E(a) = 26.0 +/- 1.0 kJ mol(-1)) than that in the gel phase (P(beta)('), E(a) = 7.3 +/- 1.6 kJ mol(-1)). Analysis of the isomerization rate constant temperature dependence allows an estimation of the bilayer viscosity and free volume properties in the L(alpha) phase.     

Bilayer thickness in unilamellar extruded 1,2-dimyristoleoyl and 1,2-dierucoyl phosphatidylcholine vesicles: SANS contrast variation study of cholesterol effect

Small-angle neutron scattering on extruded unilamellar vesicles in water was used to study bilayer thickness when cholesterol (CHOL) was added at 44.4 mol% to 1,2-dimyristoleoylphosphatidylcholine (diC14:1PC) and 1,2-dierucoylphosphatidylcholine (diC22:1PC) bilayers. Using the (1)H(2)O/(2)H(2)O contrast variation and the small-angle form of Kratky-Porod approximation, the bilayer gyration radii at infinite contrast R(g,infinity) and the bilayer thickness parameters d(g,infinity) = 12(0.5)R(g,infinity) were obtained at 30 degrees C. Addition of cholesterol to diC14:1PC increased the d(g,infinity) from 3.72 +/- 0.02 to 4.26 +/- 0.01 nm, while in the diC22:1PC bilayers the d(g,infinity) change observed was within the experimental error: +0.23 +/- 0.23 nm.     

Raman spectroscopic study of boundary lipid in 1,2-dipalmitoylphosphatidylcholine/apolipoprotein A—I recombinants

Raman spectroscopy has been used to obtain thermal phase transition profiles for recombinant particles composed of 1,2-dipalmitoylphosphatidylcholine (DPPC) and apolipoprotein A—I. Comparison of these profiles with unilamellar vesicles of DPPC indicates that lateral packing of DPPC acyl chains is tighter in recombinant DPPC/apolipoporotein A—I particles than in uncomplexed lipid of unilamellar vesicles. Consequently, the magnitude of the entropy change associated with acyl chain melting in the recombinants at the main lipid phase transition is almost twice that of unilamellar DPPC. In addition, a second phase transition has been observed for the DPPC/apolipoprotein A—I complex and has been assigned to the acyl chain melting of DPPC molecules which are bound to the apolipoprotein annulus on the periphery of the discoidal complexes. A combination of results from Raman spectroscopy, electron micrograph measurements and chemical analysis leads to the conclusion that these protein-bound lipids, the “boundary layer”, account for about 20% of the total lipid in the recombinant material. Calculations indicate that there are about 55 protein-bound lipid molecules per apolipoprotein A—I molecule in the DPPC/apolipoprotein A—I discoidal complexes prepared for this study.     

Evolution of white spots in lipid foam black films of DMPC

A new phenomenon in the kinetic behavior of thin liquid films is reported: thickening white spots (lenses) in black foam films of small unilamellar liposomes of dimyristoylphosphatidylcholine (DMPC). The time evolution of the lenses is registered and the shape changes are determined. Such structures form only at temperatures below the main phase transition temperature of the lipid bilayer (gel-liquid crystal first order phase transition).     

Self-assembly of phospholipid molecules at a Au(111) electrode surface

We described the first scanning tunneling microscopy study of spreading unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) at a Au(111) electrode surface. At the initial stage of the film formation, the molecular resolution images revealed that DMPC molecules are adsorbed flat with the acyl chains oriented parallel to the surface. The molecules assemble into double rows by aligning the acyl chains in the nearest neighbor direction of the reconstructed Au(111) surface and assuming a 90 +/- 10 degrees angle with respect to line of the molecular row. After approximately 30 min, this film is transformed into a hemimicellar state with long rows characteristic for the formation of hemicylindrical surface micelles. At hydrophilic surfaces such as glass, spreading of vesicles involves adsorption, rupture, and sliding of a single bilayer on a lubricating film of the solvent. We have provided the first evidence that a different mechanism is involved in spreading the vesicles at gold. The molecules released by rupture of vesicles self-assemble into an ordered film, and the assembly is controlled by the chain-substrate interaction.     

Magnetically alignable phase of phospholipid "bicelle" mixtures is a chiral nematic made up of wormlike micelles

We have studied the phase behavior of binary mixtures of long- and short-chain lipids, namely, dimyristoyl phosphatidylcholine (DMPC) and dihexanoyl phosphatidylcholine (DHPC), using optical microscopy and small-angle neutron scattering. Samples with a total lipid content of 25 wt %, corresponding to ratios Q ([DMPC]/[DHPC]) of 5, 3.2, and 2, are found to exhibit an isotropic (I) --> chiral nematic (N) --> lamellar phase sequence on increasing temperature. The I-N transition coincides with the chain melting transition of DMPC at Q = 5 and 3.2, but the N phase forms at a higher temperature for Q = 2. All three samples form multilamellar vesicles in the lamellar phase. Our results show that disklike "bicellar" aggregates occur only in the lower temperature isotropic phase and not in the higher temperature magnetically alignable N phase, where they were previously believed to exist. The N phase is found to consist of long, flexible wormlike micelles, their entanglement resulting in the very high viscosity of this phase.     

Hydrogen/deuterium exchange of hydrophobic peptides in model membranes by electrospray ionization mass spectrometry

We demonstrate here that the hydrogen/deuterium solvent exchange (HDX) properties of the transmembrane fragment of the M2 protein of Influenza A (M2-TM) incorporated into lipid vesicles or detergent micelles can be studied with straightforward electrospray (ESI) and nanospray mass spectrometry (MS) configurations provided that key factors, including sample preparation techniques, are optimized. Small unilamellar vesicle preparations were obtained by solubilizing dimyristoyl phosphatidylcholine (DMPC) and the M2-TM peptide in aqueous solution with n-octyl-β-D-glycopyranoside, followed by dialysis to remove the detergent. Electron microscopy experiments revealed that subsequent concentration by centrifugation introduced large multilamellar aggregates that were not compatible with ESI-MS. By contrast, a lyophilization-based concentration procedure, followed by thawing above the liquid crystal transition temperature of the lipid component, maintained the liposome size profile and yielded excellent ion fluxes in both ESI-MS and nano-ESI-MS. Using these methods the global HDX profile of M2-TM in aqueous DMPC vesicles was compared with that in methanol, demonstrating that several amide sites were protected from exchange by the lipid membrane. We also show that hydrophobic peptides can be detected by ESI-MS in the presence of a large molar excess of the detergent Triton X-100. The rate of HDX of M2-TM in Triton X-100 micelles was faster than that in DMPC vesicles but slower than when the peptide had been denatured in methanol. These results indicate that the accessibility of backbone amide sites to the solvent can be profoundly affected by membrane protein structure and dynamics, as well as the properties of model bilayer systems.     

Effects of lipid chain length on molecular interactions between paclitaxel and phospholipid within model biomembranes

Molecular interactions between an anticancer drug, paclitaxel, and phosphatidylcholine (PC) of various chain lengths were investigated in the present work by the Langmuir film balance technique and differential scanning calorimetry (DSC). Both the lipid monolayer at the air-water interface and lipid bilayer vesicles (liposomes) were employed as model biological cell membranes. Measurement and analysis of the surface pressure versus molecular area curves of the mixed monolayers of phospholipids and paclitaxel under various molar ratio showed that phospholipids and paclitaxel formed a nonideal miscible system at the interface. Paclitaxel exerted an area-condensing effect on the lipid monolayer at small molecular surface areas and an area-expanding effect at large molecular areas, which could be explained by the intermolecular forces and geometric accommodation between the two components. Paclitaxel and phospholipids could form thermodynamically stable monolayer systems: the stability increased with the chain length in the order DMPC (C14:0)>DPPC (C16:0)>DSPC (C18:0). Investigation of paclitaxel penetration into the pure lipid monolayer showed that DMPC had a higher ability to incorporate paclitaxel and the critical surface pressure for paclitaxel penetration also increased with the chain length in the order DMPC>DPPC>DSPC. A similar trend was testified by DSC studies on vesicles of the mixed paclitaxel/phospholipids bilayer. Paclitaxel showed the greatest interaction with DMPC while little interaction could be measured in the paclitaxel/DSPC liposomes. Paclitaxel caused broadening of the main phase transition without significant change at the peak melting temperature of the phospholipid bilayers, which demonstrated that paclitaxel was localized in the outer hydrophobic cooperative zone of the bilayer. The interaction between paclitaxel and phospholipid was nonspecific and the dominant factor in this interaction was the van der Waals force or hydrophobic force. As the result of the lower net van der Waals interaction between hydrocarbon chains for the shorter acyl chains, paclitaxel interacted more readily with phospholipids of shorter chain length, which also increased the bilayer intermolecular spacing.     

Electrochemical and PM-IRRAS studies of the effect of cholesterol on the properties of the headgroup region of a DMPC bilayer supported at a Au(111) electrode

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of cholesterol with the headgroups of dimyristoylphosphatidycholine (DMPC) molecules under a static electric field. DMPC/cholesterol (7:3 molar ratio) mixtures form a bilayer on a Au(111) electrode surface by fusion and spreading of small unilamellar vesicles. PM-IRRAS experiments provided detailed information concerning the conformation and hydration of headgroups of DMPC bilayers in the presence and absence of 30% cholesterol. The presence of 30% cholesterol increases the space between the headgroups of DMPC molecules and hence increases the hydration of the DMPC/cholesterol mixed bilayer. The conformational state of the headgroups of DMPC molecules in the mixed bilayer is also significantly changed. The phosphate group is closer to the surface compared with the pure DMPC bilayer. The conformation of the -O-C-C-N moiety changes from gauche to trans in the presence of cholesterol.     

Fluorescence study of the fluidity and cooperativity of the phase transitions of zwitterionic and anionic liposomes confined in sol-gel glasses

The current work makes use of different fluorescent reporter molecules and fluorescent spectroscopic techniques to characterize the thermotropic, physical, and dynamical properties of large unilamellar liposomes formed from either 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-glycerol] (DMPG) encapsulated in sol-gel matrixes. In particular, cooperativity of the phase transition is analyzed from steady-state fluorescence anisotropy of 1,6-diphenyl-1,3,5-hexatriene (DPH), the interfacial properties are studied by measuring the spectral shift of Laurdan, and the structural organization (heterogeneity) of the lipid bilayer is determined from the fluorescence lifetime of trans-parinaric acid (t-PnA). In addition, information regarding order and dynamical properties in the bulk hydrophobic core is obtained from time-resolved fluorescence anisotropy of t-PnA and 3-(4-(6-phenyl)-1,3,5-hexatrienyl)-phenylpropionic acid (PA-DPH). The spectroscopic study reveals that upon encapsulation, the basic thermodynamic properties as well as the fluidity of the lipid bilayer practically remain intact for DMPG liposomes but not for DMPC liposomes, whose lipid bilayer exhibits large gel-fluid heterogeneity. On the basis of these experimental results, electrostatic interactions between phospholipid polar heads and the porous surface of the host matrix seem to play a capital role for the preservation of the structural integrity of encapsulated bilayer.     

Lamellar-to-cubic phase change in phospholipid bilayer systems incorporated with block copolymers: DMPC and PEO-PPO-PEO (P85)

We have used small-angle X-ray scattering and calorimetric methods to investigate the temperature-dependent phase behavior of ternary systems of phospholipid (DMPC), amphiphilic PEO-PPO-PEO block copolymer (Pluronics P85), and water. It is shown that a relatively small amount of block copolymers ( approximately 3 wt %) results in a lamellar-to-cubic phase transition. Still, both the bilayer-characteristic main transition, associated with chain melting, and the pretransition, associated with in-plane modulations, are preserved for copolymer concentrations up to 50-70 wt %, indicating the preservation of a bilayer type of lipid organization also within the cubic phase. The main transition splits up into two transitions upon the addition of copolymers, one resembling the high cooperativity of the main transition and one broad transition which may reflect complex formation with the copolymers. Parallel studies incorporating poly(ethylene glycol) into the DMPC multilamellar vesicles do not give analogous structural changes. It is concluded that the major effect on the molecular scale of adding PEO-PPO-PEO block copolymers is not only due to the hydration of the membrane but also due to the incorporation of the PPO block into the bilayer structure.     

Spectroelectrochemical studies of bilayers of phospholipids in gel and liquid state on Au(111) electrode surface

Differential capacity, chronocoulometry and Polarization Modulation Fourier Transform Infrared Reflection Absorption Spectroscopy (PM FTIRRAS) were employed to investigate spreading of small unilamellar vesicles (SUVs) of DOPC and DMPC onto a Au(111) electrode surface. The electrochemical experiments demonstrated that vesicles fuse onto the electrode surface and at E>-0.5V (SSCE) or at charge densities -10-0.5 V (SSCE), the tilt angle increases to approximately 42 degrees. The increase of the tilt angle is discussed in terms of a change in the packing of the polar head of the phospholipids molecules in the bilayer adsorbed at the electrode surface.     

Calorimetric and EPR studies of the thermotropic phase behavior of phospholipid membranes

Transmission electron micrographs (TEM) showed that liposome vesicles prepared from DL-α-phosphatidylcholine dimyristoyl (1,2-ditetradecanoyl-rac-glycerol-3-phosphocholine) (DMPC) by the modified reverse-phase evaporation method (mREV) were spherical in shape and in majority of them were less than 100 nm in diameter. Differential scanning calorimetry (DSC) method was used to determine the influence of cholesterol content and pH of Tris-HCl buffer used for the preparation of liposomes on the temperature of phase transition T _C of phospholipids which form the investigated liposome vesicles. The use of DSC method made it possible to determine not only the temperature of the main phase transition of phospholipids but also the temperature of the phospholipid phase transition from the tilted gel phase(L _β′) to the ripple gel phase(P _β′). The results were compared with those obtained with EPR study. EPR study was carried out in the temperature range from 284 to 310 K i.e. below and above the phase transition temperature T _C of DMPC. On the basis of EPR spectra of spin marker 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) incorporated into the liposome, the values of parameters f were determined. Hence TEMPO can be used to observe the change in partition between aqueous and fluid lipid regions. The change in the relative values of f determined for DMPC as a function of temperature shows that this phospholipid undergoes a transition from a ‘gel phase’ to a lamellar smectic liquid crystalline phase in the presence of excess water. The EPR study of TEMPO allowed us to determine the transition temperature T _C. The results were compared with those obtained with DSC method.     

Electrochemical and PM-IRRAS studies of the effect of the static electric field on the structure of the DMPC bilayer supported at a Au(111) electrode surface

Differential capacity, charge density measurements, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) were employed to study the fusion of small unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on a Au(111) electrode surface. The differential capacity and charge density data showed that the vesicles fuse onto the gold surface at charge densities between -10 microC/cm(2) < sigma(M) < 10 microC/cm(2) to form a bilayer. When sigma(M) < -10 microC/cm(2), the film is detached from the surface but it remains in close proximity to the surface. PM-IRRAS experiments provided IR spectra for the bilayer in the adsorbed and the desorbed state. Ab initio normal coordinate calculations were performed to assist interpretation of the IR spectra. The IR bands were analyzed quantitatively, and this analysis provided information concerning the conformation and orientation of the acyl chains and the polar head region of the DMPC molecule. The orientation of the chains, hydration, and conformation of the headgroup of the DMPC molecule strongly depend on the electrode potential.     

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.     

Thin wetting films from aqueous solutions of surfactants and phospholipid dispersions

The microscopic thin wetting film method was used to study the stability of wetting films from aqueous solution of surfactants and phospholipid dispersions on a solid surface. In the case of tetradecyltrimethylammonium bromide (C(14)TAB) films the experimental data for the receding contact angle, film lifetime, surface potential at the vapor/solution and solution/silica interface were used to analyze the stability of the studied films. It is shown that with increasing C(14)TAB concentration charge reversal occurs at both (vapor/solution and solution/silica) interfaces, which affects the thin-film stability. The spontaneous rupture of the thin aqueous film was interpreted in terms of the earlier proposed heterocoagulation mechanism. The presence of the mixed cationic/anionic surfactants was found to lower contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants hetero-coagulation could arise through the formation of ionic surfactant complexes. The influence of the melting phase-transition temperature T(c) of the dimyristoylphosphatiddylcholine (DMPC) on the stability of thin films from dispersions of DMPC small unilamellar vesicles on a silica surface was studied by measuring the film lifetime and the TPC expansion rate. The stability of thin wetting films formed from dispersions of DMPC small unilamellar vesicles was investigated by the microinterferometric method. The formation of wetting films from diluted dispersions of DMPC multilamellar vesicles was studied in the temperature range 25-32 degrees C. The stability of thin film of lipid vesicles was explained on the basis of hydrophobic interactions. The results obtained show that the stability of wetting films from aqueous solutions of single cationic and mixed cationic-anionic surfactants has electrostatic origin, whereas the stability of the phospholipid film is due to hydrophobic interaction.