On the polarization of non-paraxial transverse fields

On the basis of a plane-wave spectrum representation, the polarization features of a transverse quasimonochromatic non-paraxial field have been studied. A relationship has been established between the polarization characteristics in the near field and the coherence and symmetry properties of the beam in the far field.     

Application of time-of-flight mass spectrometry to the analysis of phototransformation products of diclofenac in water under natural sunlight

Exact mass capabilities of time-of-flight (TOF) mass spectrometry along with other mass spectrometric techniques have been evaluated to elucidate a complete range of dichlofenac phototransformation products. Photolysis experiments with diclofenac in water under direct solar irradiation were performed to characterise the main phototransformation products generated and to determine their stability. Photolysis experiments were performed in both demineralised water and reconstructed standard freshwater. Samples were extracted before analysis by solid phase extraction (SPE) with Oasis HLB and MAX cartridges. Separation and identification of the transformation products were accomplished by the combined use of gas chromatography-mass spectrometry (GC/MS) and liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOFMS). Both techniques provided complementary information that enabled the identification of 13 phototransformation products. Six of them were identified by GC/MS through the structural information provided by the full scan mass spectra obtained under electron impact (EI) ionisation and the confirmation of the molecular mass provided by positive chemical ionisation (PCI) analyses. Accurate mass measurements obtained by LC/TOFMS provided the elucidation of seven polar transformation products. The low mass error observed (<2 ppm) enabled the assignment of highly probable empirical formulas as well as identification of a process dimerisation route. The photoproducts identified demonstrated that photolysis of diclofenac occurs by two main routes. One is the consequence of the initial photocyclisation of diclofenac into carbazole derivatives. The other route goes through the initial decarboxilation of diclofenac and further oxidation of the alkyl-chain, which are typical photolytic process reactions. The main photoproduct identified was 8-chloro-9H-carbazole-1yl-acetic acid.     

Algebras of sets generating non-barrelled spaces

IfA is a -algebra on setX, thenl ₀ (X,A) is a barrelled space of class ₀. IfA is an algebra, there are conditions which imply thatl ₀ (X,A) is suprabarelled. Here, wheneverA is an algebra, we give conditions forl ₀ (X,A) to be not barrelled which are related with the existence of non-trivial convergent sequences.Supported in part by DGICYT, project PB91-0407 and by the Institució Valenciana d'Estudis i Investigació, project 023.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

Application of principal component regression to luminescence data for the screening of ciprofloxacin and enrofloxacin in animal tissues

A new screening method for the analysis of enrofloxacin and ciprofloxacin in edible animal tissues is described. The method is based on the application of principal component regression to luminescence measurements after reaction of quinolones with terbium(III) in a micellar medium. The method was used, first, to discriminate between quinolone-containing or quinolone-not-containing samples (concentration below the detection limit) and, then, to quantify the sum of both analytes. Standards in a pure-water matrix, using the first three principal components, were used for the determination. RRMSE range from 4 to 10% depending on the analyte. Calibration was successfully applied to the analysis of spiked chicken and trout muscle at concentrations between 10 and 50 micrograms kg-1.     

Synthesis, characterization and electrochemical studies of the heterometallic diclusters [{Fe2(μ-CO)(CO)6(μ-PPh2)Au}2(diphosphine)] (diphosphine=dppm, dppip, dppe, dppp)

Treatment of [(ClAu)₂(diphosphine)] {diphosphine=bis(diphenylphosphino)methane (dppm), bis(diphenylphosphino)isopropane (dppip), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)} with two equivalents of the anion [Fe₂(μ-CO)(CO)₆(μ-PPh₂)]⁻ in the presence of TlBF₄ gives the new heterometallic diclusters [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₂(diphosphine)] that have been isolated and characterized. Their ³¹P-NMR spectra show different patterns as a function of the diphosphine ligand. The electrochemical behavior of these compounds has been investigated and compared with that of the mono- [Fe₂(μ-CO)(CO)₆(μ-PPh₂)(μ-AuPPh₃)] and tricluster [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₃(triphos)] derivatives.     

Matching unknown empirical formulas to chemical structure using LC/MS TOF accurate mass and database searching: example of unknown pesticides on tomato skins

Traditionally, the screening of unknown pesticides in food has been accomplished by GC/MS methods using conventional library searching routines. However, many of the new polar and thermally labile pesticides and their degradates are more readily and easily analyzed by LC/MS methods and no searchable libraries currently exist (with the exception of some user libraries, which are limited). Therefore, there is a need for LC/MS approaches to detect unknown non-target pesticides in food. This report develops an identification scheme using a combination of LC/MS time-of-flight (accurate mass) and LC/MS ion trap MS (MS/MS) with searching of empirical formulas generated through accurate mass and a ChemIndex database or Merck Index database. The approach is different than conventional library searching of fragment ions. The concept here consists of four parts. First is the initial detection of a possible unknown pesticide in actual market-place vegetable extracts (tomato skins) using accurate mass and generating empirical formulas. Second is searching either the Merck Index database on CD (10,000 compounds) or the ChemIndex (77,000 compounds) for possible structures. Third is MS/MS of the unknown pesticide in the tomato-skin extract followed by fragment ion identification using chemical drawing software and comparison with accurate-mass ion fragments. Fourth is the verification with authentic standards, if available. Three examples of unknown, non-target pesticides are shown using a tomato-skin extract from an actual market place sample. Limitations of the approach are discussed including the use of A + 2 isotope signatures, extended databases, lack of authentic standards, and natural product unknowns in food extracts.     

Synthesis and structure of chiral-at-metal complexes with the ligand (S)-2-[(Sp)-2-(diphenylphosphino)ferrocenyl]-4-isopropyloxazoline

Half-sandwich complexes of formula [(ηⁿ-ring)MClL]PF₆ [L = (S)-2-[(S_p)-2-(diphenylphosphino)ferrocenyl]-4-isopropyloxazoline; (ηⁿ-ring)M = (η⁵-C₅Me₅)Rh; (η⁵-C₅Me₅)Ir; (η⁶-p-MeC₆H₄iPr)Ru; (η⁶-p-MeC₆H₄iPr)Os] have been prepared and spectroscopically characterised. The molecular structures of the rhodium and iridium compounds have been determined by X-ray crystallography. The related solvate complexes [(η⁵-C₅Me₅)ML(Me₂CO)]²⁺ (M = Rh, Ir) are active catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene.